The DOI matches its Crossref record; 70 of the 70 references it cites were found in a registry or an index.
Na-Ion Battery Anodes: Materials and Electrochemistry
Abstract
The intermittent nature of renewable energy sources, such as solar and wind, calls for sustainable electrical energy storage (EES) technologies for stationary applications. Li will be simply too rare for Li-ion batteries (LIBs) to be used for large-scale storage purposes. In contrast, Na-ion batteries (NIBs) are highly promising to meet the demand of grid-level storage because Na is truly earth abundant and ubiquitous around the globe. Furthermore, NIBs share a similar rocking-chair operation mechanism with LIBs, which potentially provides high reversibility and long cycling life. It would be most efficient to transfer knowledge learned on LIBs during the last three decades to the development of NIBs. Following this logic, rapid progress has been made in NIB cathode materials, where layered metal oxides and polyanionic compounds exhibit encouraging results. On the anode side, pure graphite as the standard anode for LIBs can only form NaC64 in NIBs if solvent co-intercalation does not occur due to the unfavorable thermodynamics. In fact, it was the utilization of a carbon anode in LIBs that enabled the commercial successes. Anodes of metal-ion batteries determine key characteristics, such as safety and cycling life; thus, it is indispensable to identify suitable anode materials for NIBs. In this Account, we review recent development on anode materials for NIBs. Due to the limited space, we will mainly discuss carbon-based and alloy-based anodes and highlight progress made in our groups in this field. We first present what is known about the failure mechanism of graphite anode in NIBs. We then go on to discuss studies on hard carbon anodes, alloy-type anodes, and organic anodes. Especially, the multiple functions of natural cellulose that is used as a low-cost carbon precursor for mass production and as a soft substrate for tin anodes are highlighted. The strategies of minimizing the surface area of carbon anodes for improving the first-cycle Coulombic efficiency are also outlined, where graphene oxide was employed as dehydration agent and 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) was used to unzip wood fiber. Furthermore, surface modification by atomic layer deposition technology is introduced, where we discover that a thin layer of Al2O3 can function to encapsulate Sn nanoparticles, leading to a much enhanced cycling performance. We also highlight recent work about the phosphorene/graphene anode, which outperformed other anodes in terms of capacity. The aromatic organic anode is also studied as anode with very high initial sodiation capacity. Furthermore, electrochemical intercalation of Na ions into reduced graphene oxide is applied for fabricating transparent conductors, demonstrating the great feasibility of Na ion intercalation for optical applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Research Development on Sodium-Ion Batteries
Yabuuchi, N., Kubota, K., Dahbi, M., & Komaba, S. (2014) · Chemical Reviews · doi:10.1021/cr500192f · Cited by 6,478
Slater, M. D., Kim, D., Lee, E., & Johnson, C. S. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201200691 · Cited by 4,518
Na-ion batteries, recent advances and present challenges to become low cost energy storage systems
Palomares, V., Serras, P., Villaluenga, I., Hueso, K. B., Carretero-González, J., & Rojo, T. (2012) · Energy & Environmental Science · doi:10.1039/c2ee02781j · Cited by 3,564
Kim, S., Seo, D., Ma, X., Ceder, G., & Kang, K. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200026 · Cited by 3,370
Room-temperature stationary sodium-ion batteries for large-scale electric energy storage
Pan, H., Hu, Y.-S., & Chen, L. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40847g · Cited by 3,319
Mechanisms for Lithium Insertion in Carbonaceous Materials
Dahn, J. R., Zheng, T., Liu, Y., & Xue, J. S. (1995) · Science · doi:10.1126/science.270.5236.590 · Cited by 2,123
Komaba, S., Murata, W., Ishikawa, T., Yabuuchi, N., Ozeki, T., Nakayama, T., Ogata, A., Gotoh, K., & Fujiwara, K. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201100854 · Cited by 2,116
Sodium Ion Insertion in Hollow Carbon Nanowires for Battery Applications
Cao, Y., Xiao, L., Sushko, M. L., Wang, W., Schwenzer, B., Xiao, J., Nie, Z., Saraf, L. V., Yang, Z., & Liu, J. (2012) · Nano Letters · doi:10.1021/nl3016957 · Cited by 1,929
Expanded graphite as superior anode for sodium-ion batteries
Wen, Y., He, K., Zhu, Y., Han, F., Xu, Y., Matsuda, I., Ishii, Y., Cumings, J., & Wang, C. (2014) · Nature Communications · doi:10.1038/ncomms5033 · Cited by 1,894
High Capacity Anode Materials for Rechargeable Sodium-Ion Batteries
Stevens, D. A., & Dahn, J. R. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393348 · Cited by 1,884
Cited by
From Lithium‐Ion to Sodium‐Ion Batteries: Advantages, Challenges, and Surprises
Nayak, P. K., Yang, L., Brehm, W., & Adelhelm, P. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201703772 · Cited by 2,674
Hu, Z., Liu, Q., Chou, S., & Dou, S. (2017) · Advanced Materials · doi:10.1002/adma.201700606 · Cited by 911
Synthesis of micro/nanoscaled metal–organic frameworks and their direct electrochemical applications
Xiao, X., Zou, L., Pang, H., & Xu, Q. (2020) · Chemical Society Reviews · doi:10.1039/c7cs00614d · Cited by 882
Prussian Blue Analogues for Sodium‐Ion Batteries: Past, Present, and Future
Peng, J., Zhang, W., Liu, Q., Wang, J., Chou, S., Liu, H., & Dou, S. (2022) · Advanced Materials · doi:10.1002/adma.202108384 · Cited by 849
Fang, S., Bresser, D., & Passerini, S. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201902485 · Cited by 823
Sodium‐Ion Batteries: From Academic Research to Practical Commercialization
Deng, J., Luo, W., Chou, S., Liu, H., & Dou, S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701428 · Cited by 770
Self-citationNanocellulose: a promising nanomaterial for advanced electrochemical energy storage
Chen, W., Yu, H., Lee, S.-Y., Wei, T., Li, J., & Fan, Z. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00790f · Cited by 766
Advanced Materials through Assembly of Nanocelluloses
Kontturi, E., Laaksonen, P., Linder, M. B., Nonappa, Gröschel, A. H., Rojas, O. J., & Ikkala, O. (2018) · Advanced Materials · doi:10.1002/adma.201703779 · Cited by 664
Porous Carbons: Structure‐Oriented Design and Versatile Applications
Tian, W., Zhang, H., Duan, X., Sun, H., Shao, G., & Wang, S. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201909265 · Cited by 657
The Application of Metal Sulfides in Sodium Ion Batteries
Xiao, Y., Lee, S. H., & Sun, Y. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601329 · Cited by 616
Ether-based electrolytes for sodium ion batteries
Li, Y., Wu, F., Li, Y., Liu, M., Feng, X., Bai, Y., & Wu, C. (2022) · Chemical Society Reviews · doi:10.1039/d1cs00948f · Cited by 597
Challenges and Strategies for High‐Energy Aqueous Electrolyte Rechargeable Batteries
Zhang, H., Liu, X., Li, H., Hasa, I., & Passerini, S. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202004433 · Cited by 592
Short‐Range Order in Mesoporous Carbon Boosts Potassium‐Ion Battery Performance
Wang, W., Zhou, J., Wang, Z., Zhao, L., Li, P., Yang, Y., Yang, C., Huang, H., & Guo, S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701648 · Cited by 575
Hou, H., Shao, L., Zhang, Y., Zou, G., Chen, J., & Ji, X. (2017) · Advanced Science · doi:10.1002/advs.201600243 · Cited by 566
Self-citation3D Graphene Materials: From Understanding to Design and Synthesis Control
Sun, Z., Fang, S., & Hu, Y. H. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00083 · Cited by 543
Urchin‐Like CoSe2 as a High‐Performance Anode Material for Sodium‐Ion Batteries
Zhang, K., Park, M., Zhou, L., Lee, G., Li, W., Kang, Y., & Chen, J. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201602608 · Cited by 537
Recent developments and insights into the understanding of Na metal anodes for Na-metal batteries
Zhao, Y., Adair, K. R., & Sun, X. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01373j · Cited by 533
Ren, W., Zhang, H., Guan, C., & Cheng, C. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201702116 · Cited by 520
Zhang, J., Wang, D.-W., Lv, W., Zhang, S., Liang, Q., Zheng, D., Kang, F., & Yang, Q.-H. (2017) · Energy & Environmental Science · doi:10.1039/c6ee03367a · Cited by 508
A revised mechanistic model for sodium insertion in hard carbons
Au, H., Alptekin, H., Jensen, A. C. S., Olsson, E., O’Keefe, C. A., Smith, T., Crespo-Ribadeneyra, M., Headen, T. F., Grey, C. P., Cai, Q., et al. (2020) · Energy & Environmental Science · doi:10.1039/d0ee01363c · Cited by 508
Understanding of Sodium Storage Mechanism in Hard Carbons: Ongoing Development under Debate
Sun, N., Qiu, J., & Xu, B. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202200715 · Cited by 474
Nitrogen-rich hard carbon as a highly durable anode for high-power potassium-ion batteries
Chen, C., Wang, Z., Zhang, B., Miao, L., Cai, J., Peng, L., Huang, Y., Jiang, J., Huang, Y., Zhang, L., et al. (2017) · Energy Storage Materials · doi:10.1016/j.ensm.2017.05.010 · Cited by 468
Two‐Dimensional Metal Oxide Nanomaterials for Next‐Generation Rechargeable Batteries
Mei, J., Liao, T., Kou, L., & Sun, Z. (2017) · Advanced Materials · doi:10.1002/adma.201700176 · Cited by 459
Yun, Q., Lu, Q., Zhang, X., Tan, C., & Zhang, H. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201706426 · Cited by 456
Zhang, K., Park, M., Zhou, L., Lee, G., Shin, J., Hu, Z., Chou, S., Chen, J., & Kang, Y. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201607469 · Cited by 449
Ying, H., & Han, W. (2017) · Advanced Science · doi:10.1002/advs.201700298 · Cited by 436
Khan, A. H., Ghosh, S., Pradhan, B., Dalui, A., Shrestha, L. K., Acharya, S., & Ariga, K. (2017) · Bulletin of the Chemical Society of Japan · doi:10.1246/bcsj.20170043 · Cited by 432
Hard Carbon as Sodium‐Ion Battery Anodes: Progress and Challenges
Xiao, B., Rojo, T., & Li, X. (2019) · ChemSusChem · doi:10.1002/cssc.201801879 · Cited by 432
Chen, B., Chao, D., Liu, E., Jaroniec, M., Zhao, N., & Qiao, S.-Z. (2020) · Energy & Environmental Science · doi:10.1039/c9ee03549d · Cited by 421
Sodium-ion battery anodes: Status and future trends
Zhang, W., Zhang, F., Ming, F., & Alshareef, H. N. (2019) · EnergyChem · doi:10.1016/j.enchem.2019.100012 · Cited by 407
Li, Y., Qian, J., Zhang, M., Wang, S., Wang, Z., Li, M., Bai, Y., An, Q., Xu, H., Wu, F., et al. (2020) · Advanced Materials · doi:10.1002/adma.202005802 · Cited by 407
Electrochemistry and Solid‐State Chemistry of NaMeO2 (Me = 3d Transition Metals)
Kubota, K., Kumakura, S., Yoda, Y., Kuroki, K., & Komaba, S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703415 · Cited by 399
Hong, Z., Zhen, Y., Ruan, Y., Kang, M., Zhou, K., Zhang, J., Huang, Z., & Wei, M. (2018) · Advanced Materials · doi:10.1002/adma.201802035 · Cited by 396
Ultrathin Surface Coating Enables the Stable Sodium Metal Anode
Luo, W., Lin, C., Zhao, O., Noked, M., Zhang, Y., Rubloff, G. W., & Hu, L. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601526 · Cited by 380
Self-citationLiu, M., Zhang, P., Qu, Z., Yan, Y., Lai, C., Liu, T., & Zhang, S. (2019) · Nature Communications · doi:10.1038/s41467-019-11925-z · Cited by 361
Zhang, K., Kim, D., Hu, Z., Park, M., Noh, G., Yang, Y., Zhang, J., Lau, V. W.-H., Chou, S.-L., Cho, M., et al. (2019) · Nature Communications · doi:10.1038/s41467-018-07646-4 · Cited by 358
Luo, J., Wang, C., Wang, H., Hu, X., Matios, E., Lu, X., Zhang, W., Tao, X., & Li, W. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201805946 · Cited by 352
Xu, X., Zhao, R., Ai, W., Chen, B., Du, H., Wu, L., Zhang, H., Huang, W., & Yu, T. (2018) · Advanced Materials · doi:10.1002/adma.201800658 · Cited by 342
Muñoz‐Márquez, M. Á., Saurel, D., Gómez‐Cámer, J. L., Casas‐Cabanas, M., Castillo‐Martínez, E., & Rojo, T. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700463 · Cited by 338
Porous Al Current Collector for Dendrite-Free Na Metal Anodes
Liu, S., Tang, S., Zhang, X., Wang, A., Yang, Q.-H., & Luo, J. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b03185 · Cited by 336
The Role of Hydrothermal Carbonization in Sustainable Sodium‐Ion Battery Anodes
Xu, Z., Wang, J., Guo, Z., Xie, F., Liu, H., Yadegari, H., Tebyetekerwa, M., Ryan, M. P., Hu, Y., & Titirici, M. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202200208 · Cited by 328
Zheng, X., Bommier, C., Luo, W., Jiang, L., Hao, Y., & Huang, Y. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2018.04.014 · Cited by 321
Self-citationHard carbons for sodium-ion batteries and beyond
Xie, F., Xu, Z., Guo, Z., & Titirici, M.-M. (2020) · Progress in Energy · doi:10.1088/2516-1083/aba5f5 · Cited by 319
Zhou, X., Chen, L., Zhang, W., Wang, J., Liu, Z., Zeng, S., Xu, R., Wu, Y., Ye, S., Feng, Y., et al. (2019) · Nano Letters · doi:10.1021/acs.nanolett.9b01127 · Cited by 318
Geng, X., Jiao, Y., Han, Y., Mukhopadhyay, A., Yang, L., & Zhu, H. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201702998 · Cited by 317
Self-citationSolid electrolytes and interfaces in all-solid-state sodium batteries: Progress and perspective
Hou, W., Guo, X., Shen, X., Amine, K., Yu, H., & Lu, J. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.07.036 · Cited by 314
Challenges of today for Na-based batteries of the future: From materials to cell metrics
Hasa, I., Mariyappan, S., Saurel, D., Adelhelm, P., Koposov, A. Y., Masquelier, C., Croguennec, L., & Casas-Cabanas, M. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228872 · Cited by 305
Yang, B., Chen, J., Lei, S., Guo, R., Li, H., Shi, S., & Yan, X. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702409 · Cited by 303
Li, B., Xi, B., Feng, Z., Lin, Y., Liu, J., Feng, J., Qian, Y., & Xiong, S. (2018) · Advanced Materials · doi:10.1002/adma.201705788 · Cited by 302
Electrode Materials of Sodium-Ion Batteries toward Practical Application
Huang, Y., Zheng, Y., Li, X., Adams, F., Luo, W., Huang, Y., & Hu, L. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b00609 · Cited by 300
Self-citationLuo, J., Zheng, J., Nai, J., Jin, C., Yuan, H., Sheng, O., Liu, Y., Fang, R., Zhang, W., Huang, H., et al. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201808107 · Cited by 292
Xu, G., Amine, R., Abouimrane, A., Che, H., Dahbi, M., Ma, Z., Saadoune, I., Alami, J., Mattis, W. L., Pan, F., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702403 · Cited by 287
Liu, Y., He, X., Hanlon, D., Harvey, A., Coleman, J. N., & Li, Y. (2016) · ACS Nano · doi:10.1021/acsnano.6b04577 · Cited by 285
Luo, W., Zhang, Y., Xu, S., Dai, J., Hitz, E., Li, Y., Yang, C., Chen, C., Liu, B., & Hu, L. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b01138 · Cited by 285
Self-citationZou, K., Deng, W., Cai, P., Deng, X., Wang, B., Liu, C., Li, J., Hou, H., Zou, G., & Ji, X. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202005581 · Cited by 275
Self-citationAn Organic Cathode for Potassium Dual-Ion Full Battery
Fan, L., Liu, Q., Xu, Z., & Lu, B. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00378 · Cited by 270
Recent developments in electrode materials for potassium-ion batteries
Xu, Y.-S., Duan, S.-Y., Sun, Y.-G., Bin, D.-S., Tao, X.-S., Zhang, D., Liu, Y., Cao, A.-M., & Wan, L.-J. (2019) · Journal of Materials Chemistry A · doi:10.1039/c8ta10953b · Cited by 269
Insights on the Mechanism of Na-Ion Storage in Soft Carbon Anode
Jian, Z., Bommier, C., Luo, L., Li, Z., Wang, W., Wang, C., Greaney, P. A., & Ji, X. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b05474 · Cited by 267
Self-citationLin, H., Li, M., Yang, X., Yu, D., Zeng, Y., Wang, C., Chen, G., & Du, F. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201900323 · Cited by 266
Synthesis of CuS@CoS2 Double‐Shelled Nanoboxes with Enhanced Sodium Storage Properties
Fang, Y., Guan, B. Y., Luan, D., & Lou, X. W. (. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201902583 · Cited by 257
Cobalt oxide-based nanoarchitectures for electrochemical energy applications
Mei, J., Liao, T., Ayoko, G. A., Bell, J., & Sun, Z. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.03.001 · Cited by 256
Biobased Functional Carbon Materials: Production, Characterization, and Applications—A Review
Correa, C. R., & Kruse, A. (2018) · Materials · doi:10.3390/ma11091568 · Cited by 93
Versatile zero‐ to three‐dimensional carbon for electrochemical energy storage
Zhao, Y., Zhang, Y., Wang, Y., Cao, D., Sun, X., & Zhu, H. (2021) · Carbon Energy · doi:10.1002/cey2.137 · Cited by 90
Self-citationWang, M., Peng, A., Jiang, J., Zeng, M., Yang, Z., Chen, J., Guo, B., Ma, Z., Yu, B., Zhang, Y., et al. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.134567 · Cited by 36
Metadata
- Authors
- Luo, W., Shen, F., Bommier, C., Zhu, H., Ji, X., & Hu, L.
- Venue
- Accounts of Chemical Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-01-19
- Volume
- 49
- Issue
- 2
- Pages
- 231-240
- ISSN
- 0001-4842 (ISSN-L)
- 1520-4898
- OpenAlex
- W2340399827
- Cited by
- 1,081
- References
- 70
- FWCI
- 76.84
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.