The DOI matches its Crossref record; 70 of the 70 references it cites were found in a registry or an index.
Na-Ion Battery Anodes: Materials and Electrochemistry
Abstract
The intermittent nature of renewable energy sources, such as solar and wind, calls for sustainable electrical energy storage (EES) technologies for stationary applications. Li will be simply too rare for Li-ion batteries (LIBs) to be used for large-scale storage purposes. In contrast, Na-ion batteries (NIBs) are highly promising to meet the demand of grid-level storage because Na is truly earth abundant and ubiquitous around the globe. Furthermore, NIBs share a similar rocking-chair operation mechanism with LIBs, which potentially provides high reversibility and long cycling life. It would be most efficient to transfer knowledge learned on LIBs during the last three decades to the development of NIBs. Following this logic, rapid progress has been made in NIB cathode materials, where layered metal oxides and polyanionic compounds exhibit encouraging results. On the anode side, pure graphite as the standard anode for LIBs can only form NaC64 in NIBs if solvent co-intercalation does not occur due to the unfavorable thermodynamics. In fact, it was the utilization of a carbon anode in LIBs that enabled the commercial successes. Anodes of metal-ion batteries determine key characteristics, such as safety and cycling life; thus, it is indispensable to identify suitable anode materials for NIBs. In this Account, we review recent development on anode materials for NIBs. Due to the limited space, we will mainly discuss carbon-based and alloy-based anodes and highlight progress made in our groups in this field. We first present what is known about the failure mechanism of graphite anode in NIBs. We then go on to discuss studies on hard carbon anodes, alloy-type anodes, and organic anodes. Especially, the multiple functions of natural cellulose that is used as a low-cost carbon precursor for mass production and as a soft substrate for tin anodes are highlighted. The strategies of minimizing the surface area of carbon anodes for improving the first-cycle Coulombic efficiency are also outlined, where graphene oxide was employed as dehydration agent and 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) was used to unzip wood fiber. Furthermore, surface modification by atomic layer deposition technology is introduced, where we discover that a thin layer of Al2O3 can function to encapsulate Sn nanoparticles, leading to a much enhanced cycling performance. We also highlight recent work about the phosphorene/graphene anode, which outperformed other anodes in terms of capacity. The aromatic organic anode is also studied as anode with very high initial sodiation capacity. Furthermore, electrochemical intercalation of Na ions into reduced graphene oxide is applied for fabricating transparent conductors, demonstrating the great feasibility of Na ion intercalation for optical applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Research Development on Sodium-Ion Batteries
Yabuuchi, N., Kubota, K., Dahbi, M., & Komaba, S. (2014) · Chemical Reviews · doi:10.1021/cr500192f · Cited by 6,478
Slater, M. D., Kim, D., Lee, E., & Johnson, C. S. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201200691 · Cited by 4,518
Na-ion batteries, recent advances and present challenges to become low cost energy storage systems
Palomares, V., Serras, P., Villaluenga, I., Hueso, K. B., Carretero-González, J., & Rojo, T. (2012) · Energy & Environmental Science · doi:10.1039/c2ee02781j · Cited by 3,564
Kim, S., Seo, D., Ma, X., Ceder, G., & Kang, K. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200026 · Cited by 3,370
Room-temperature stationary sodium-ion batteries for large-scale electric energy storage
Pan, H., Hu, Y.-S., & Chen, L. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40847g · Cited by 3,319
Mechanisms for Lithium Insertion in Carbonaceous Materials
Dahn, J. R., Zheng, T., Liu, Y., & Xue, J. S. (1995) · Science · doi:10.1126/science.270.5236.590 · Cited by 2,123
Komaba, S., Murata, W., Ishikawa, T., Yabuuchi, N., Ozeki, T., Nakayama, T., Ogata, A., Gotoh, K., & Fujiwara, K. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201100854 · Cited by 2,116
Sodium Ion Insertion in Hollow Carbon Nanowires for Battery Applications
Cao, Y., Xiao, L., Sushko, M. L., Wang, W., Schwenzer, B., Xiao, J., Nie, Z., Saraf, L. V., Yang, Z., & Liu, J. (2012) · Nano Letters · doi:10.1021/nl3016957 · Cited by 1,929
Expanded graphite as superior anode for sodium-ion batteries
Wen, Y., He, K., Zhu, Y., Han, F., Xu, Y., Matsuda, I., Ishii, Y., Cumings, J., & Wang, C. (2014) · Nature Communications · doi:10.1038/ncomms5033 · Cited by 1,894
High Capacity Anode Materials for Rechargeable Sodium-Ion Batteries
Stevens, D. A., & Dahn, J. R. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393348 · Cited by 1,884
The Mechanisms of Lithium and Sodium Insertion in Carbon Materials
Stevens, D. A., & Dahn, J. R. (2001) · Journal of The Electrochemical Society · doi:10.1149/1.1379565 · Cited by 1,499
A phosphorene–graphene hybrid material as a high-capacity anode for sodium-ion batteries
Sun, J., Lee, H.-W., Pasta, M., Yuan, H., Zheng, G., Sun, Y., Li, Y., & Cui, Y. (2015) · Nature Nanotechnology · doi:10.1038/nnano.2015.194 · Cited by 1,480
Chen, C., Wen, Y., Hu, X., Ji, X., Yan, M., Mai, L., Hu, P., Shan, B., & Huang, Y. (2015) · Nature Communications · doi:10.1038/ncomms7929 · Cited by 1,155
Self-citationHollow Carbon Nanospheres with Superior Rate Capability for Sodium‐Based Batteries
Tang, K., Fu, L., White, R. J., Yu, L., Titirici, M., Antonietti, M., & Maier, J. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201100691 · Cited by 1,104
New Mechanistic Insights on Na-Ion Storage in Nongraphitizable Carbon
Bommier, C., Surta, T. W., Dolgos, M., & Ji, X. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b01969 · Cited by 998
Self-citationWang, H., Lu, Z., Xu, S., Kong, D., Cha, J. J., Zheng, G., Hsu, P.-C., Yan, K., Bradshaw, D., Prinz, F. B., et al. (2013) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1316792110 · Cited by 988
Carbon Nanosheet Frameworks Derived from Peat Moss as High Performance Sodium Ion Battery Anodes
Ding, J., Wang, H., Li, Z., Kohandehghan, A., Cui, K., Xu, Z., Zahiri, B., Tan, X., Lotfabad, E. M., Olsen, B. C., et al. (2013) · ACS Nano · doi:10.1021/nn404640c · Cited by 979
Jache, B., & Adelhelm, P. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201403734 · Cited by 963
Electrochemical intercalation of sodium in NaxCoO2 bronzes
DELMAS, C., BRACONNIER, J., FOUASSIER, C., & HAGENMULLER, P. (1981) · Solid State Ionics · doi:10.1016/0167-2738(81)90076-x · Cited by 903
Zhu, C., Mu, X., van Aken, P. A., Yu, Y., & Maier, J. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201308354 · Cited by 888
Challenges for Na-ion Negative Electrodes
Chevrier, V. L., & Ceder, G. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3607983 · Cited by 862
An Amorphous Red Phosphorus/Carbon Composite as a Promising Anode Material for Sodium Ion Batteries
Kim, Y., Park, Y., Choi, A., Choi, N., Kim, J., Lee, J., Ryu, J. H., Oh, S. M., & Lee, K. T. (2013) · Advanced Materials · doi:10.1002/adma.201204877 · Cited by 854
Peanut shell hybrid sodium ion capacitor with extreme energy–power rivals lithium ion capacitors
Ding, J., Wang, H., Li, Z., Cui, K., Karpuzov, D., Tan, X., Kohandehghan, A., & Mitlin, D. (2015) · Energy & Environmental Science · doi:10.1039/c4ee02986k · Cited by 818
MoS2 Nanoflowers with Expanded Interlayers as High‐Performance Anodes for Sodium‐Ion Batteries
Hu, Z., Wang, L., Zhang, K., Wang, J., Cheng, F., Tao, Z., & Chen, J. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201407898 · Cited by 817
Sodium Storage Behavior in Natural Graphite using Ether‐based Electrolyte Systems
Kim, H., Hong, J., Park, Y., Kim, J., Hwang, I., & Kang, K. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201402984 · Cited by 767
Electrochemical intercalation of sodium in graphite
GE, P. (1988) · Solid State Ionics · doi:10.1016/0167-2738(88)90351-7 · Cited by 726
High Capacity and Rate Capability of Amorphous Phosphorus for Sodium Ion Batteries
Qian, J., Wu, X., Cao, Y., Ai, X., & Yang, H. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201209689 · Cited by 696
Amorphous TiO2 Nanotube Anode for Rechargeable Sodium Ion Batteries
Xiong, H., Slater, M. D., Balasubramanian, M., Johnson, C. S., & Rajh, T. (2011) · The Journal of Physical Chemistry Letters · doi:10.1021/jz2012066 · Cited by 673
Wang, H., Wu, Z., Meng, F., Ma, D., Huang, X., Wang, L., & Zhang, X. (2013) · ChemSusChem · doi:10.1002/cssc.201200680 · Cited by 639
Electrospun Sb/C Fibers for a Stable and Fast Sodium-Ion Battery Anode
Zhu, Y., Han, X., Xu, Y., Liu, Y., Zheng, S., Xu, K., Hu, L., & Wang, C. (2013) · ACS Nano · doi:10.1021/nn4025674 · Cited by 639
Self-citationNegative electrodes for Na-ion batteries
Dahbi, M., Yabuuchi, N., Kubota, K., Tokiwa, K., & Komaba, S. (2014) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp00826j · Cited by 623
Zhu, H., Jia, Z., Chen, Y., Weadock, N., Wan, J., Vaaland, O., Han, X., Li, T., & Hu, L. (2013) · Nano Letters · doi:10.1021/nl400998t · Cited by 612
Self-citationHigh‐Capacity Anode Materials for Sodium‐Ion Batteries
Kim, Y., Ha, K., Oh, S. M., & Lee, K. T. (2014) · Chemistry – A European Journal · doi:10.1002/chem.201402511 · Cited by 595
Fu, L., Tang, K., Song, K., van Aken, P. A., Yu, Y., & Maier, J. (2014) · Nanoscale · doi:10.1039/c3nr05374a · Cited by 583
Microstructural Evolution of Tin Nanoparticles during In Situ Sodium Insertion and Extraction
Wang, J., Liu, X. H., Mao, S. X., & Huang, J. Y. (2012) · Nano Letters · doi:10.1021/nl303305c · Cited by 583
Zhao, L., Zhao, J., Hu, Y., Li, H., Zhou, Z., Armand, M., & Chen, L. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200166 · Cited by 568
Reduced graphene oxide with superior cycling stability and rate capability for sodium storage
Wang, Y.-X., Chou, S.-L., Liu, H.-K., & Dou, S.-X. (2013) · Carbon · doi:10.1016/j.carbon.2013.01.064 · Cited by 561
Li, Y., Xu, S., Wu, X., Yu, J., Wang, Y., Hu, Y.-S., Li, H., Chen, L., & Huang, X. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta05451b · Cited by 533
Sodium Terephthalate as an Organic Anode Material for Sodium Ion Batteries
Park, Y., Shin, D., Woo, S. H., Choi, N. S., Shin, K. H., Oh, S. M., Lee, K. T., & Hong, S. Y. (2012) · Advanced Materials · doi:10.1002/adma.201201205 · Cited by 517
Chemically Bonded Phosphorus/Graphene Hybrid as a High Performance Anode for Sodium-Ion Batteries
Song, J., Yu, Z., Gordin, M. L., Hu, S., Yi, R., Tang, D., Walter, T., Regula, M., Choi, D., Li, X., et al. (2014) · Nano Letters · doi:10.1021/nl502759z · Cited by 490
First-principles study of alkali metal-graphite intercalation compounds
Nobuhara, K., Nakayama, H., Nose, M., Nakanishi, S., & Iba, H. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.06.057 · Cited by 476
Redox reaction of Sn-polyacrylate electrodes in aprotic Na cell
Komaba, S., Matsuura, Y., Ishikawa, T., Yabuuchi, N., Murata, W., & Kuze, S. (2012) · Electrochemistry Communications · doi:10.1016/j.elecom.2012.05.017 · Cited by 418
Synergistic Na-Storage Reactions in Sn4P3 as a High-Capacity, Cycle-stable Anode of Na-Ion Batteries
Qian, J., Xiong, Y., Cao, Y., Ai, X., & Yang, H. (2014) · Nano Letters · doi:10.1021/nl404637q · Cited by 414
An Organic Pigment as a High‐Performance Cathode for Sodium‐Ion Batteries
Luo, W., Allen, M., Raju, V., & Ji, X. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201400554 · Cited by 406
Self-citationXiong, F., Wang, H., Liu, X., Sun, J., Brongersma, M., Pop, E., & Cui, Y. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b02619 · Cited by 395
Tin Phosphide as a Promising Anode Material for Na‐Ion Batteries
Kim, Y., Kim, Y., Choi, A., Woo, S., Mok, D., Choi, N., Jung, Y. S., Ryu, J. H., Oh, S. M., & Lee, K. T. (2014) · Advanced Materials · doi:10.1002/adma.201305638 · Cited by 393
Predicting capacity of hard carbon anodes in sodium-ion batteries using porosity measurements
Bommier, C., Luo, W., Gao, W.-Y., Greaney, A., Ma, S., & Ji, X. (2014) · Carbon · doi:10.1016/j.carbon.2014.04.064 · Cited by 372
Self-citationLuo, W., Schardt, J., Bommier, C., Wang, B., Razink, J., Simonsen, J., & Ji, X. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta12389h · Cited by 364
Self-citationAnodes for Sodium Ion Batteries Based on Tin–Germanium–Antimony Alloys
Farbod, B., Cui, K., Kalisvaart, W. P., Kupsta, M., Zahiri, B., Kohandehghan, A., Lotfabad, E. M., Li, Z., Luber, E. J., & Mitlin, D. (2014) · ACS Nano · doi:10.1021/nn4063598 · Cited by 343
Graphite Intercalation Compounds
Rüdorff, W. (1959) · Advances in Inorganic Chemistry and Radiochemistry · doi:10.1016/s0065-2792(08)60255-1 · Cited by 329
MoS2 Nanoflowers with Expanded Interlayers as High‐Performance Anodes for Sodium‐Ion Batteries
Hu, Z., Wang, L., Zhang, K., Wang, J., Cheng, F., Tao, Z., & Chen, J. (2014) · Angewandte Chemie · doi:10.1002/ange.201407898 · Cited by 323
Li, W., Chou, S., Wang, J., Kim, J. H., Liu, H., & Dou, S. (2014) · Advanced Materials · doi:10.1002/adma.201400794 · Cited by 317
Low-Surface-Area Hard Carbon Anode for Na-Ion Batteries via Graphene Oxide as a Dehydration Agent
Luo, W., Bommier, C., Jian, Z., Li, X., Carter, R., Vail, S., Lu, Y., Lee, J.-J., & Ji, X. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am507679x · Cited by 293
Self-citationVan der Waals density functional study of the energetics of alkali metal intercalation in graphite
Wang, Z., Selbach, S. M., & Grande, T. (2014) · RSC Adv. · doi:10.1039/c3ra47187j · Cited by 291
Xiong, X., Luo, W., Hu, X., Chen, C., Qie, L., Hou, D., & Huang, Y. (2015) · Scientific Reports · doi:10.1038/srep09254 · Cited by 285
Self-citationElectrochemically Expandable Soft Carbon as Anodes for Na-Ion Batteries
Luo, W., Jian, Z., Xing, Z., Wang, W., Bommier, C., Lerner, M. M., & Ji, X. (2015) · ACS Central Science · doi:10.1021/acscentsci.5b00329 · Cited by 270
Self-citationElectrochemical insertion of sodium into hard carbons
Thomas, P., & Billaud, D. (2002) · Electrochimica Acta · doi:10.1016/s0013-4686(02)00250-5 · Cited by 257
Park, J., Kim, J.-S., Park, J.-W., Nam, T.-H., Kim, K.-W., Ahn, J.-H., Wang, G., & Ahn, H.-J. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2013.01.057 · Cited by 241
Origin of non-SEI related coulombic efficiency loss in carbons tested against Na and Li
Memarzadeh Lotfabad, E., Kalisvaart, P., Kohandehghan, A., Karpuzov, D., & Mitlin, D. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta04995k · Cited by 226
Atomic-Layer-Deposition Oxide Nanoglue for Sodium Ion Batteries
Han, X., Liu, Y., Jia, Z., Chen, Y.-C., Wan, J., Weadock, N., Gaskell, K. J., Li, T., & Hu, L. (2014) · Nano Letters · doi:10.1021/nl4035626 · Cited by 204
Self-citationRecent Development on Anodes for Na‐Ion Batteries
Bommier, C., & Ji, X. (2015) · Israel Journal of Chemistry · doi:10.1002/ijch.201400118 · Cited by 202
Self-citationOkamoto, Y. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp4063753 · Cited by 201
Bodenes, L., Darwiche, A., Monconduit, L., & Martinez, H. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.09.037 · Cited by 199
Wet milled synthesis of an Sb/MWCNT nanocomposite for improved sodium storage
Zhou, X., Dai, Z., Bao, J., & Guo, Y.-G. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta13438e · Cited by 198
David, L., & Singh, G. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp5080847 · Cited by 178
All Organic Sodium‐Ion Batteries with Na4C8H2O6
Wang, S., Wang, L., Zhu, Z., Hu, Z., Zhao, Q., & Chen, J. (2014) · Angewandte Chemie · doi:10.1002/ange.201400032 · Cited by 164
Chemically Crushed Wood Cellulose Fiber towards High-Performance Sodium-Ion Batteries
Shen, F., Zhu, H., Luo, W. H., Wan, J., Zhou, L., Dai, J., Zhao, B., Han, X., Fu, K. K., & Hu, L. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b07583 · Cited by 151
Self-citationAtomic Force Microscopy Studies on Molybdenum Disulfide Flakes as Sodium-Ion Anodes
Lacey, S. D., Wan, J., Cresce, A. V. W., Russell, S. M., Dai, J., Bao, W., Xu, K., & Hu, L. (2014) · Nano Letters · doi:10.1021/nl503871s · Cited by 125
Self-citationCoupling In Situ TEM and Ex Situ Analysis to Understand Heterogeneous Sodiation of Antimony
Li, Z., Tan, X., Li, P., Kalisvaart, P., Janish, M. T., Mook, W. M., Luber, E. J., Jungjohann, K., Carter, C. B., & Mitlin, D. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b03373 · Cited by 102
Sodium-Ion Intercalated Transparent Conductors with Printed Reduced Graphene Oxide Networks
Wan, J., Gu, F., Bao, W., Dai, J., Shen, F., Luo, W. H., Han, X., Urban, D. F., & Hu, L. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b00300 · Cited by 56
Self-citation
Cited by
From Lithium‐Ion to Sodium‐Ion Batteries: Advantages, Challenges, and Surprises
Nayak, P. K., Yang, L., Brehm, W., & Adelhelm, P. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201703772 · Cited by 2,674
Hu, Z., Liu, Q., Chou, S., & Dou, S. (2017) · Advanced Materials · doi:10.1002/adma.201700606 · Cited by 911
Synthesis of micro/nanoscaled metal–organic frameworks and their direct electrochemical applications
Xiao, X., Zou, L., Pang, H., & Xu, Q. (2020) · Chemical Society Reviews · doi:10.1039/c7cs00614d · Cited by 882
Prussian Blue Analogues for Sodium‐Ion Batteries: Past, Present, and Future
Peng, J., Zhang, W., Liu, Q., Wang, J., Chou, S., Liu, H., & Dou, S. (2022) · Advanced Materials · doi:10.1002/adma.202108384 · Cited by 849
Fang, S., Bresser, D., & Passerini, S. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201902485 · Cited by 823
Metadata
- Authors
- Luo, W., Shen, F., Bommier, C., Zhu, H., Ji, X., & Hu, L.
- Venue
- Accounts of Chemical Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-01-19
- Volume
- 49
- Issue
- 2
- Pages
- 231-240
- ISSN
- 0001-4842 (ISSN-L)
- 1520-4898
- OpenAlex
- W2340399827
- Cited by
- 1,081
- References
- 70
- FWCI
- 76.84
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.