The DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.
Vertically Aligned and Interconnected Graphene Networks for High Thermal Conductivity of Epoxy Composites with Ultralow Loading
Abstract
Efficient removal of heat via thermal interface materials has become one of the most critical challenges in the development of modern microelectronic devices. However, traditional polymer composites present limited thermal conductivity even when highly loaded with highly thermally conductive fillers due to the lack of efficient heat transfer channels. In this work, vertically aligned and interconnected graphene networks are first used as the filler, which is prepared by a controlled three-step procedure: formation of graphene oxide liquid crystals, oriented freeze casting, and high-temperature annealing reduction under Ar. The obtained composite, at an ultralow graphene loading of 0.92 vol %, exhibits a high thermal conductivity (2.13 W m –1 K –1 ) that is equivalent to a dramatic enhancement of 1231% compared to the pure matrix. Furthermore, the composite also presents a much reduced coefficient of thermal expansion (∼37.4 ppm K –1 ) and increased glass transition temperature (135.4 °C). This strategy provides an insight for the design of high-performance composites with potential to be used in advanced electronic packaging.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Superior Thermal Conductivity of Single-Layer Graphene
Balandin, A. A., Ghosh, S., Bao, W., Calizo, I., Teweldebrhan, D., Miao, F., & Lau, C. N. (2008) · Nano Letters · doi:10.1021/nl0731872 · Cited by 13,823
Self-Organized Discotic Liquid Crystals for High-Efficiency Organic Photovoltaics
Schmidt-Mende, L., Fechtenkötter, A., Müllen, K., Moons, E., Friend, R. H., & MacKenzie, J. D. (2001) · Science · doi:10.1126/science.293.5532.1119 · Cited by 2,378
Emerging challenges and materials for thermal management of electronics
Moore, A. L., & Shi, L. (2014) · Materials Today · doi:10.1016/j.mattod.2014.04.003 · Cited by 2,106
Thermal properties of graphene: Fundamentals and applications
Pop, E., Varshney, V., & Roy, A. K. (2012) · MRS Bulletin · doi:10.1557/mrs.2012.203 · Cited by 1,684
Graphene–Multilayer Graphene Nanocomposites as Highly Efficient Thermal Interface Materials
Shahil, K. M. F., & Balandin, A. A. (2012) · Nano Letters · doi:10.1021/nl203906r · Cited by 1,467
Freeze‐Casting of Porous Ceramics: A Review of Current Achievements and Issues
Deville, S. (2008) · Advanced Engineering Materials · doi:10.1002/adem.200700270 · Cited by 1,260
Biomimetic superelastic graphene-based cellular monoliths
Qiu, L., Liu, J. Z., Chang, S. L. Y., Wu, Y., & Li, D. (2012) · Nature Communications · doi:10.1038/ncomms2251 · Cited by 1,250
Negative Thermal Expansion Coefficient of Graphene Measured by Raman Spectroscopy
Yoon, D., Son, Y.-W., & Cheong, H. (2011) · Nano Letters · doi:10.1021/nl201488g · Cited by 1,076
Thermal conductivity and structure of non-covalent functionalized graphene/epoxy composites
Teng, C.-C., Ma, C.-C. M., Lu, C.-H., Yang, S.-Y., Lee, S.-H., Hsiao, M.-C., Yen, M.-Y., Chiou, K.-C., & Lee, T.-M. (2011) · Carbon · doi:10.1016/j.carbon.2011.06.095 · Cited by 766
Improved thermal conductivity for chemically functionalized exfoliated graphite/epoxy composites
Ganguli, S., Roy, A. K., & Anderson, D. P. (2008) · Carbon · doi:10.1016/j.carbon.2008.02.008 · Cited by 674
Cited by
Shao, G., Hanaor, D. A. H., Shen, X., & Gurlo, A. (2020) · Advanced Materials · doi:10.1002/adma.201907176 · Cited by 871
Two-Dimensional Materials for Thermal Management Applications
Song, H., Liu, J., Liu, B., Wu, J., Cheng, H.-M., & Kang, F. (2018) · Joule · doi:10.1016/j.joule.2018.01.006 · Cited by 680
Zhang, F., Feng, Y., & Feng, W. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100580 · Cited by 566
Wu, S., Li, T., Tong, Z., Chao, J., Zhai, T., Xu, J., Yan, T., Wu, M., Xu, Z., Bao, H., et al. (2019) · Advanced Materials · doi:10.1002/adma.201905099 · Cited by 545
Hu, J., Huang, Y., Yao, Y., Pan, G., Sun, J., Zeng, X., Sun, R., Xu, J.-B., Song, B., & Wong, C.-P. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b02410 · Cited by 499
Self-citationThermal conductivity of graphene-based polymer nanocomposites
Huang, X., Zhi, C., Lin, Y., Bao, H., Wu, G., Jiang, P., & Mai, Y.-W. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100577 · Cited by 410
Construction of 3D Skeleton for Polymer Composites Achieving a High Thermal Conductivity
Yao, Y., Sun, J., Zeng, X., Sun, R., Xu, J., & Wong, C. (2018) · Small · doi:10.1002/smll.201704044 · Cited by 389
Self-citationScotti, K. L., & Dunand, D. C. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2018.01.001 · Cited by 377
Min, P., Liu, J., Li, X., An, F., Liu, P., Shen, Y., Koratkar, N., & Yu, Z. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201805365 · Cited by 375
Zhang, X., Xu, Y., Wang, M., Liu, E., Zhao, N., Shi, C., Lin, D., Zhu, F., & He, C. (2020) · Nature Communications · doi:10.1038/s41467-020-16490-4 · Cited by 355
Chen, X., Gao, H., Tang, Z., Dong, W., Li, A., & Wang, G. (2020) · Energy & Environmental Science · doi:10.1039/d0ee01355b · Cited by 348
Guo, F., Shen, X., Zhou, J., Liu, D., Zheng, Q., Yang, J., Jia, B., Lau, A. K. T., & Kim, J. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201910826 · Cited by 345
Zhang, Y., Heo, Y.-J., Son, Y.-R., In, I., An, K.-H., Kim, B.-J., & Park, S.-J. (2019) · Carbon · doi:10.1016/j.carbon.2018.10.077 · Cited by 341
Strategies for enhancing thermal conductivity of polymer-based thermal interface materials: a review
Ma, H., Gao, B., Wang, M., Yuan, Z., Shen, J., Zhao, J., & Feng, Y. (2021) · Journal of Materials Science · doi:10.1007/s10853-020-05279-x · Cited by 299
Zhang, X., Zhao, N., & He, C. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100672 · Cited by 293
Liu, P., Li, X., Min, P., Chang, X., Shu, C., Ding, Y., & Yu, Z.-Z. (2021) · Nano-Micro Letters · doi:10.1007/s40820-020-00548-5 · Cited by 278
Recent progress in polymer/two-dimensional nanosheets composites with novel performances
Li, J., Liu, X., Feng, Y., & Yin, J. (2022) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2022.101505 · Cited by 274
Xu, X., Hu, R., Chen, M., Dong, J., Xiao, B., Wang, Q., & Wang, H. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.125447 · Cited by 272
Self-citationYang, J., Tang, L.-S., Bai, L., Bao, R.-Y., Liu, Z.-Y., Xie, B.-H., Yang, M.-B., & Yang, W. (2019) · Materials Horizons · doi:10.1039/c8mh01219a · Cited by 269
Shen, X., Zheng, Q., & Kim, J.-K. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100708 · Cited by 264
Dai, W., Lv, L., Lu, J., Hou, H., Yan, Q., Alam, F. E., Li, Y., Zeng, X., Yu, J., Wei, Q., et al. (2019) · ACS Nano · doi:10.1021/acsnano.8b07337 · Cited by 259
Self-citationQin, M., Xu, Y., Cao, R., Feng, W., & Chen, L. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201805053 · Cited by 258
Wei, X., Xue, F., Qi, X.-D., Yang, J.-H., Zhou, Z.-W., Yuan, Y.-P., & Wang, Y. (2019) · Applied Energy · doi:10.1016/j.apenergy.2018.11.091 · Cited by 133
Yang, J., Tang, L.-S., Bai, L., Bao, R.-Y., Liu, Z., Xie, B.-H., Yang, M.-B., & Yang, W. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b00565 · Cited by 105
Cui, S., Wu, W., Liu, C., Wang, Y., Chen, Q., & Liu, X. (2021) · Nanoscale · doi:10.1039/d1nr04075h · Cited by 33
Metadata
- Authors
- Lian, G., Tuan, C.-C., Li, L., Jiao, S., Wang, Q., Moon, K.-S., Cui, D., & Wong, C.-P.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-08-19
- Volume
- 28
- Issue
- 17
- Pages
- 6096-6104
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2509202796
- Cited by
- 382
- References
- 37
- FWCI
- 17.46
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.