The DOI matches its Crossref record; 55 of the 55 references it cites were found in a registry or an index.
Best Practice: Performance and Cost Evaluation of Lithium Ion Battery Active Materials with Special Emphasis on Energy Efficiency
Abstract
In order to increase the energy content of lithium ion batteries (LIBs), researchers worldwide focus on high specific energy (Wh/kg) and energy density (Wh/L) anode and cathode materials. However, most of the attention is primarily paid to the specific gravimetric and/or volumetric capacities of these materials, while other key parameters are often neglected. For practical applications, in particular for large size battery cells, the Coulombic efficiency (CE), voltage efficiency (VE), and energy efficiency (EE) have to be considered, which we point out in this work by comparing numerous LIB active materials. For all presented active materials, energy inefficiency is mainly caused by a voltage inefficiency, which in turn is affected by the voltage hysteresis between the charge and discharge curves. Hence, this study could show that materials with larger voltage hysteresis such as the ZnFe 2 O 4 (ZFO) anode or the Li-rich cathode material exhibit also a lower VE and EE than for instance graphite and LiNi 0.5 Mn 1.5 O 4 . Furthermore, from the accumulated EE losses the resulting “extra energy costs” are calculated based on industry and domestic electricity costs in Germany, in Japan and in the U.S.A. In particular, in countries with higher electricity costs such as Germany, the accumulated extra energy, which is necessary to compensate the energy inefficiency while retaining a certain energy level in the electrode material, has a stronger impact on the extra energy costs and thus on the total cost of ownership of the battery cell system.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
Thackeray, M. M., Wolverton, C., & Isaacs, E. D. (2012) · Energy & Environmental Science · doi:10.1039/c2ee21892e · Cited by 2,515
Cabana, J., Monconduit, L., Larcher, D., & Palacín, M. R. (2010) · Advanced Materials · doi:10.1002/adma.201000717 · Cited by 2,361
Li2MnO3-stabilized LiMO2 (M = Mn, Ni, Co) electrodes for lithium-ion batteries
Thackeray, M. M., Kang, S.-H., Johnson, C. S., Vaughey, J. T., Benedek, R., & Hackney, S. A. (2007) · Journal of Materials Chemistry · doi:10.1039/b702425h · Cited by 2,039
Structural Changes in Silicon Anodes during Lithium Insertion/Extraction
Obrovac, M. N., & Christensen, L. (2004) · Electrochemical and Solid-State Letters · doi:10.1149/1.1652421 · Cited by 1,995
Electrochemical lithiation of tin and tin-based intermetallics and composites
Winter, M., & Besenhard, J. O. (1999) · Electrochimica Acta · doi:10.1016/s0013-4686(99)00191-7 · Cited by 1,676
Self-citationUnderstanding electrochemical potentials of cathode materials in rechargeable batteries
Liu, C., Neale, Z. G., & Cao, G. (2016) · Materials Today · doi:10.1016/j.mattod.2015.10.009 · Cited by 1,156
Redox flow cells for energy conversion
Ponce de León, C., Frías-Ferrer, A., González-García, J., Szánto, D. A., & Walsh, F. C. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.02.095 · Cited by 1,118
The rechargeable revolution: a better battery
Van Noorden, R. (2014) · Nature · doi:10.1038/507026a · Cited by 1,047
A Critical Review of Li/Air Batteries
Christensen, J., Albertus, P., Sanchez-Carrera, R. S., Lohmann, T., Kozinsky, B., Liedtke, R., Ahmed, J., & Kojic, A. (2011) · Journal of The Electrochemical Society · doi:10.1149/2.086202jes · Cited by 1,041
Will advanced lithium-alloy anodes have a chance in lithium-ion batteries?
Besenhard, J. O., Yang, J., & Winter, M. (1997) · Journal of Power Sources · doi:10.1016/s0378-7753(96)02547-5 · Cited by 943
Self-citationWinter, M. (2009) · Zeitschrift für Physikalische Chemie · doi:10.1524/zpch.2009.6086 · Cited by 807
Self-citationFuture generations of cathode materials: an automotive industry perspective
Andre, D., Kim, S.-J., Lamp, P., Lux, S. F., Maglia, F., Paschos, O., & Stiaszny, B. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00361j · Cited by 806
A review of lithium and non-lithium based solid state batteries
Kim, J. G., Son, B., Mukherjee, S., Schuppert, N., Bates, A., Kwon, O., Choi, M. J., Chung, H. Y., & Park, S. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.02.054 · Cited by 783
All‐Solid‐State Lithium‐Ion Microbatteries: A Review of Various Three‐Dimensional Concepts
Oudenhoven, J. F. M., Baggetto, L., & Notten, P. H. L. (2011) · Advanced Energy Materials · doi:10.1002/aenm.201000002 · Cited by 739
Nitta, N., & Yushin, G. (2014) · Particle & Particle Systems Characterization · doi:10.1002/ppsc.201300231 · Cited by 724
Laheäär, A., Przygocki, P., Abbas, Q., & Béguin, F. (2015) · Electrochemistry Communications · doi:10.1016/j.elecom.2015.07.022 · Cited by 720
Cycling Li-O 2 batteries via LiOH formation and decomposition
Liu, T., Leskes, M., Yu, W., Moore, A. J., Zhou, L., Bayley, P. M., Kim, G., & Grey, C. P. (2015) · Science · doi:10.1126/science.aac7730 · Cited by 652
The thermodynamic origin of hysteresis in insertion batteries
Dreyer, W., Jamnik, J., Guhlke, C., Huth, R., Moškon, J., & Gaberšček, M. (2010) · Nature Materials · doi:10.1038/nmat2730 · Cited by 619
The Lithium/Air Battery: Still an Emerging System or a Practical Reality?
Grande, L., Paillard, E., Hassoun, J., Park, J., Lee, Y., Sun, Y., Passerini, S., & Scrosati, B. (2015) · Advanced Materials · doi:10.1002/adma.201403064 · Cited by 618
The intriguing question of anionic redox in high-energy density cathodes for Li-ion batteries
Saubanère, M., McCalla, E., Tarascon, J.-M., & Doublet, M.-L. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03048j · Cited by 595
Review—Electromobility: Batteries or Fuel Cells?
Gröger, O., Gasteiger, H. A., & Suchsland, J.-P. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0211514jes · Cited by 529
Redox Electrolytes in Supercapacitors
Akinwolemiwa, B., Peng, C., & Chen, G. Z. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0111505jes · Cited by 509
Conversion Reaction‐Based Oxide Nanomaterials for Lithium Ion Battery Anodes
Yu, S., Lee, S. H., Lee, D. J., Sung, Y., & Hyeon, T. (2016) · Small · doi:10.1002/smll.201502299 · Cited by 499
Yabuuchi, N., Takeuchi, M., Nakayama, M., Shiiba, H., Ogawa, M., Nakayama, K., Ohta, T., Endo, D., Ozaki, T., Inamasu, T., et al. (2015) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1504901112 · Cited by 498
Quantifying the promise of lithium–air batteries for electric vehicles
Gallagher, K. G., Goebel, S., Greszler, T., Mathias, M., Oelerich, W., Eroglu, D., & Srinivasan, V. (2014) · Energy & Environmental Science · doi:10.1039/c3ee43870h · Cited by 460
(2011) · Wiley eBooks · doi:10.1002/9783527637188 · Cited by 436
Sathiya, M., Ramesha, K., Rousse, G., Foix, D., Gonbeau, D., Prakash, A. S., Doublet, M. L., Hemalatha, K., & Tarascon, J.-M. (2013) · Chemistry of Materials · doi:10.1021/cm400193m · Cited by 405
Wagner, R., Preschitschek, N., Passerini, S., Leker, J., & Winter, M. (2013) · Journal of Applied Electrochemistry · doi:10.1007/s10800-013-0533-6 · Cited by 395
Self-citationMetal hydrides for lithium-ion batteries
Oumellal, Y., Rougier, A., Nazri, G. A., Tarascon, J.-M., & Aymard, L. (2008) · Nature Materials · doi:10.1038/nmat2288 · Cited by 395
Reversible Oxygen Participation to the Redox Processes Revealed for Li1.20Mn0.54Co0.13Ni0.13O2
Koga, H., Croguennec, L., Ménétrier, M., Douhil, K., Belin, S., Bourgeois, L., Suard, E., Weill, F., & Delmas, C. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.038306jes · Cited by 376
Carbon Coated ZnFe2O4 Nanoparticles for Advanced Lithium‐Ion Anodes
Bresser, D., Paillard, E., Kloepsch, R., Krueger, S., Fiedler, M., Schmitz, R., Baither, D., Winter, M., & Passerini, S. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201200735 · Cited by 340
Self-citationInterpreting High Precision Coulometry Results on Li-ion Cells
Smith, A. J., Burns, J. C., Xiong, D., & Dahn, J. R. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3625232 · Cited by 308
Rechargeable Batteries: Grasping for the Limits of Chemistry
Berg, E. J., Villevieille, C., Streich, D., Trabesinger, S., & Novák, P. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0081514jes · Cited by 270
Gallus, D. R., Schmitz, R., Wagner, R., Hoffmann, B., Nowak, S., Cekić-Lasković, I., Schmitz, R. W., & Winter, M. (2014) · Electrochimica Acta · doi:10.1016/j.electacta.2014.04.091 · Cited by 239
Self-citationVoltage hysteresis of lithium ion batteries caused by mechanical stress
Lu, B., Song, Y., Zhang, Q., Pan, J., Cheng, Y.-T., & Zhang, J. (2016) · Physical Chemistry Chemical Physics · doi:10.1039/c5cp06179b · Cited by 210
Hysteresis during Lithium Insertion in Hydrogen‐Containing Carbons
Zheng, T., McKinnon, W. R., & Dahn, J. R. (1996) · Journal of The Electrochemical Society · doi:10.1149/1.1836972 · Cited by 208
Besenhard, J. O., & Winter, M. (2002) · ChemPhysChem · Cited by 201
Self-citationLi, J., Kloepsch, R., Stan, M. C., Nowak, S., Kunze, M., Winter, M., & Passerini, S. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.01.006 · Cited by 194
Self-citationCost modeling of lithium‐ion battery cells for automotive applications
Patry, G., Romagny, A., Martinet, S., & Froelich, D. (2015) · Energy Science & Engineering · doi:10.1002/ese3.47 · Cited by 194
The Electrochemical Reaction of Li with Amorphous Si-Sn Alloys
Beaulieu, L. Y., Hewitt, K. C., Turner, R. L., Bonakdarpour, A., Abdo, A. A., Christensen, L., Eberman, K. W., Krause, L. J., & Dahn, J. R. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1530151 · Cited by 192
Electrochemical impedance spectroscopy study of the SEI formation on graphite and metal electrodes
Schranzhofer, H., Bugajski, J., Santner, H., Korepp, C., Möller, K., Besenhard, J. O., Winter, M., & Sitte, W. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.05.034 · Cited by 157
Self-citationZnFe2O4‐C/LiFePO4‐CNT: A Novel High‐Power Lithium‐Ion Battery with Excellent Cycling Performance
Varzi, A., Bresser, D., von Zamory, J., Müller, F., & Passerini, S. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201400054 · Cited by 155
Studies on the Anode/Electrolyte Interfacein Lithium Ion Batteries
Winter, M., Appel, W. K., Evers, B., Hodal, T., Möller, K., Schneider, I., Wachtler, M., Wagner, M. R., Wrodnigg, G. H., & Besenhard, J. O. (2001) · Monatshefte für Chemie - Chemical Monthly · doi:10.1007/s007060170110 · Cited by 151
Self-citationKang, J., Yan, F., Zhang, P., & Du, C. (2014) · Energy · doi:10.1016/j.energy.2014.04.038 · Cited by 111
Mueller, F., Bresser, D., Paillard, E. E., Winter, M., & Passerini, S. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.02.051 · Cited by 95
Self-citationPercolating networks of TiO2 nanorods and carbon for high power lithium insertion electrodes
Bresser, D., Paillard, E. E., Binetti, E., Krueger, S., Striccoli, M., Winter, M., & Passerini, S. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.12.051 · Cited by 94
Self-citationThe importance of “going nano” for high power battery materials
Bresser, D., Paillard, E. E., Copley, M., Bishop, P. T., Winter, M., & Passerini, S. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.07.035 · Cited by 89
Self-citationMurmann, P., Mönnighoff, X., von Aspern, N., Janßen, P., Kalinovich, N., Shevchuk, M., Kazakova, O., Röschenthaler, G., Cekić-Lasković, I., & Winter, M. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.1031605jes · Cited by 68
Self-citationA novel way to calculate energy efficiency for rechargeable batteries
Kang, J., Yan, F., Zhang, P., & Du, C. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.01.105 · Cited by 67
Wagner, R., Streipert, B., Kraft, V., Jiménez, A. R., Röser, S., Kasnatscheew, J., Gallus, D. R., Börner, M., Mayer, C., Arlinghaus, H. F., et al. (2016) · Advanced Materials Interfaces · doi:10.1002/admi.201600096 · Cited by 63
Self-citationLithium‐Ionen‐Technologie und was danach kommen könnte
Bieker, P. M., & Winter, M. (2016) · Chemie in unserer Zeit · doi:10.1002/ciuz.201600745 · Cited by 59
Self-citationWinter, M., & Besenhard, J. O. (1999) · Chemie in unserer Zeit · doi:10.1002/ciuz.19990330503 · Cited by 54
Self-citationJia, H., Schmuch, R., He, X., Evertz, M., Nowak, S., Li, J., Winter, M., & Placke, T. (2016) · Acta chimica slovenica · doi:10.17344/acsi.2016.2243 · Cited by 41
Self-citationMurmann, P., Schmitz, R., Nowak, S., Ignatiev, N., Sartori, P., Cekic-Laskovic, I., & Winter, M. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0261509jes · Cited by 17
Self-citation
Cited by
Performance and cost of materials for lithium-based rechargeable automotive batteries
Schmuch, R., Wagner, R., Hörpel, G., Placke, T., & Winter, M. (2018) · Nature Energy · doi:10.1038/s41560-018-0107-2 · Cited by 3,233
Self-citationWinter, M., Barnett, B., & Xu, K. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00422 · Cited by 2,193
Self-citationFundamental understanding and practical challenges of anionic redox activity in Li-ion batteries
Assat, G., & Tarascon, J.-M. (2018) · Nature Energy · doi:10.1038/s41560-018-0097-0 · Cited by 1,588
Commercialization of Lithium Battery Technologies for Electric Vehicles
Zeng, X., Li, M., Abd El‐Hady, D., Alshitari, W., Al‐Bogami, A. S., Lu, J., & Amine, K. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201900161 · Cited by 1,542
Asenbauer, J., Eisenmann, T., Kuenzel, M., Kazzazi, A., Chen, Z., & Bresser, D. (2020) · Sustainable Energy & Fuels · doi:10.1039/d0se00175a · Cited by 1,295
Metadata
- Authors
- Meister, P., Jia, H., Li, J., Kloepsch, R., Winter, M., & Placke, T.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-10-04
- Volume
- 28
- Issue
- 20
- Pages
- 7203-7217
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2521081399
- Cited by
- 364
- References
- 55
- FWCI
- 24.85
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.