Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat
Cited by 169

The DOI matches its Crossref record; 17 of the 17 references it cites were found in a registry or an index.

Thermal Behavior of Lithium- and Sodium-Ion Batteries: A Review on Heat Generation, Battery Degradation, Thermal Runway – Perspective and Future Directions

Velumani, Deepika, Bansal, Ankit · 2022 · Energy & Fuels

Abstract

Safety is a major challenge plaguing the use of Li-ion batteries (LIBs) in electric vehicle (EV) applications. A wide range of operating conditions with varying temperatures and drive cycles can lead to battery abuse. A dangerous consequence of these abuses is thermal runaway (TR), an exponential increase in temperature inside the battery caused by the exothermic decomposition of the cell materials that leads to fire and explosion. It is imperative to develop methodologies to accurately predict and mitigate thermal runway. Sodium-ion batteries (SIBs) are inherently safer than LIBs. In addition to offering better safety, SIBs are gaining momentum due to the abundance and low cost of their raw materials compared to the limited lithium resources and high cost of elements such as cobalt, copper, and nickel used in LIBs. However, the challenge of low energy density impedes the maturation of sodium-ion technology to the same level as lithium-ion technology. There are additional challenges to the acceptability of sodium-ion batteries due to the poor sodium kinetics during insertion reactions, leading to rapid material degradation. Additionally, the higher solubility of the solid electrolyte interface (SEI) observed in the case of SIBs may lead to undesired side reactions, causing increased heat generation. This paper presents a comprehensive review of the heat-release mechanisms, their differences, and prediction methodologies for the two battery chemistries. Various experimental and modeling approaches for TR detection from the literature are reviewed. Future research directions toward the development of a battery management system (BMS) with the capability to identify the precursors to thermal runaway and implement mitigation strategies are also discussed.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1021/acs.energyfuels.2c02889

Cites

17 of 17 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 169

Metadata

Authors
Velumani, D., & Bansal, A.
Venue
Energy & Fuels
Published
2022-11-17
Volume
36
Issue
23
Pages
14000-14029
ISSN
  • 0887-0624 (ISSN-L)
  • 1520-5029
OpenAlex
W4309625823
Cited by
169
References
17
FWCI
8.63
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.