CoChat

Development Trends in Porous Adsorbents for Carbon Capture

The DOI matches its Crossref record; 272 of the 275 references it cites were found in a registry or an index.

Abstract

Accumulation of greenhouse gases especially CO2 in the atmosphere leading to global warming with undesirable climate changes has been a serious global concern. Major power generation in the world is from coal based power plants. Carbon capture through pre- and post- combustion technologies with various technical options like adsorption, absorption, membrane separations, and chemical looping combustion with and without oxygen uncoupling have received considerable attention of researchers, environmentalists and the stake holders. Carbon capture from flue gases can be achieved with micro and meso porous adsorbents. This review covers carbonaceous (organic and metal organic frameworks) and noncarbonaceous (inorganic) porous adsorbents for CO2 adsorption at different process conditions and pore sizes. Focus is also given to noncarbonaceous micro and meso porous adsorbents in chemical looping combustion involving insitu CO2 capture at high temperature (>400 °C). Adsorption mechanisms, material characteristics, and synthesis methods are discussed. Attention is given to isosteric heats and characterization techniques. The options to enhance the techno-economic viability of carbon capture techniques by integrating with CO2 utilization to produce industrially important chemicals like ammonia and urea are analyzed. From the reader's perspective, for different classes of materials, each section has been summarized in the form of tables or figures to get a quick glance of the developments.

Overview

Integrity signals

Registry

Crossref · 10.1021/acs.est.5b03149

Cites

272 of 272 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Show all 272 references

Research works printed but not linked: 24

  1. 10.1016/j.cherd.2012.02.011 · DOI
  2. 10.1016/S0196-8904(96)00242-7 · DOI · Paper page
  3. 2014, Design and Synthesis of Nitrogen-Doped Porous Carbon Materials for CO2 Capture and Investigation of CO2 Sorption Kinetics; 2.4.2
  4. Coombs D. S., 1997, Canadian Mineralogist, 35, 1571
  5. Collart, O.Nano design of an Aluminosilicate Framework into a mesoporous MCM-4A Architecture. Ph.D. Dissertation,Universiteti, Antwerpen, 2003.
  6. Kangwanwatana W., 2013, Chemical Engineering Transactions., 35, 1
  7. DRAFT: Technology and Applied R&D Needs for Carbon Capture- Beyond 2020, Resource Document for the Workshop on Basic Research needs for Carbon Capture: Beyond 2020, March, 2010, U.S. Department of Energy.
  8. 10.1016/j.apenergy.2012.11.034 · DOI · Paper page
  9. 10.1016/j.ijggc.2012.12.014 · DOI
  10. Buasri A., 2013, Sustainable Energy., 1, 7
  11. 10.1016/j.fuel.2009.11.019 · DOI · Paper page
  12. Songolzadeh M., 2012, Sci. World J., 6, 213
  13. Fauth D. J., 2003, Fuel Chemistry Division Preprints., 48, 169
  14. Kotyczka-Moranska M., 2012, Adv. Mater. Res., 48, 77
  15. Dangi G. P., 2012, Indian J. Chem., 51, 1238
  16. Ramírez-Moreno M. J., 2014, Alkaline and Alkaline-Earth Ceramic Oxides for CO2 Capture, Separation and Subsequent Catalytic Chemical Conversion, Intech
  17. 10.1039/C4EE01647E · DOI · Paper page
  18. Ouyang S., 2011, Sustain. Environ. Res., 21, 21
  19. 10.1016/j.apenergy.2014.02.012 · DOI
  20. Sciubidło A., 2012, Journal of Power Technologies., 92, 115
  21. Cho, P.Development and Characterisation of Oxygen-Carrier Materials for Chemical-Looping Combustion, Ph.D. Dissertation,Chalmers University of Technology, Göteborg, Sweden, 2005.
  22. Aydoğdu, B.Comparison of sorption capacities of hydrocarbons on different samples of MCM-41, Ph.D. Dissertation,Middle East Technical University,Turkey, 2013.
  23. Hanapimat, K. S. N. K.Synthesis and modification of micro and mesoporous materials as CO 2 adsorbents, Ph.D. Dissertation,Universiti Teknologi Malaysia,Malaysia, 2009.
  24. Kleitz, F.Ordered Mesoporous Materials: Template Removal, Frameworks and Morphology, Ph.D. Dissertation,Ruhr University Bochum,Germany, 2002.

Cited by

Items 101–127 of 127

Metadata

Authors
Sreenivasulu, B., Sreedhar, I., Suresh, P., & Raghavan, K. V.
Affiliations
  • Birla Institute of Technology and Science - Hyderabad Campus (IN)
  • Granules India Ltd, Gagillapur, Hyderabad, India
  • Indian Institute of Chemical Technology (IN)
Corresponding author
Sreedhar, Inkollu
Venue
Environmental Science & Technology
Published
2015-10-14
Volume
49
Issue
21
Pages
12641-12661
ISSN
  • 0013-936X (ISSN-L)
  • 1520-5851
OpenAlex
W2242231821
Cited by
127
References
275
Citations by year
2026: 12 · 2025: 6 · 2024: 16 · 2023: 16 · 2022: 7 · 2021: 7 · 2020: 11 · 2019: 10 · 2018: 10 · 2017: 17 · 2016: 15
FWCI
2.32
Type
journal article
Language
en
Open access
closed
Locations
  • Environmental Science & Technology (publishedVersion)
  • PubMed (publishedVersion)
Funders
BITS Pilani Hyderabad
Topics
  • Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
  • Physical Sciences › Energy › Fuel Technology › Chemical Looping and Thermochemical Processes
  • Physical Sciences › Environmental Science › Environmental Engineering › Industrial Gas Emission Control
Keywords
CO2 capture, CO2 adsorption, porous adsorbents, metal-organic frameworks, carbon adsorbents, porous inorganic materials, flue gas, chemical looping combustion, oxygen uncoupling, adsorption mechanism, isosteric heat of adsorption, CO2 utilization, ammonia synthesis, urea synthesis, coal-fired power plants, pore size
MeSH terms
Adsorption, Carbon Dioxide, Oxygen, Urea, Porosity, Climate Change, Carbon Sequestration

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.