Development Trends in Porous Adsorbents for Carbon Capture
The DOI matches its Crossref record; 272 of the 275 references it cites were found in a registry or an index.
Abstract
Accumulation of greenhouse gases especially CO2 in the atmosphere leading to global warming with undesirable climate changes has been a serious global concern. Major power generation in the world is from coal based power plants. Carbon capture through pre- and post- combustion technologies with various technical options like adsorption, absorption, membrane separations, and chemical looping combustion with and without oxygen uncoupling have received considerable attention of researchers, environmentalists and the stake holders. Carbon capture from flue gases can be achieved with micro and meso porous adsorbents. This review covers carbonaceous (organic and metal organic frameworks) and noncarbonaceous (inorganic) porous adsorbents for CO2 adsorption at different process conditions and pore sizes. Focus is also given to noncarbonaceous micro and meso porous adsorbents in chemical looping combustion involving insitu CO2 capture at high temperature (>400 °C). Adsorption mechanisms, material characteristics, and synthesis methods are discussed. Attention is given to isosteric heats and characterization techniques. The options to enhance the techno-economic viability of carbon capture techniques by integrating with CO2 utilization to produce industrially important chemicals like ammonia and urea are analyzed. From the reader's perspective, for different classes of materials, each section has been summarized in the form of tables or figures to get a quick glance of the developments.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“unlike the microporous organic polymers, there are not any complexity or concern regarding the synthesis, cost and environmental aspects of synthesis of carbon-based adsorbents [11,18,20,33].”
From Biomass/Biochar carbon materials for CO2 capture and sequestration by cyclic adsorption processes: A review and prospects for future directions (2022) · cites this paper as [20]
Citations
Cites
Ordered mesoporous molecular sieves synthesized by a liquid-crystal template mechanism
Kresge, C. T., Leonowicz, M. E., Roth, W. J., Vartuli, J. C., & Beck, J. S. (1992) · Nature · doi:10.1038/359710a0 · Cited by 16,275
A new family of mesoporous molecular sieves prepared with liquid crystal templates
Beck, J. S., Vartuli, J. C., Roth, W. J., Leonowicz, M. E., Kresge, C. T., Schmitt, K. D., Chu, C. T. W., Olson, D. H., Sheppard, E. W., McCullen, S. B., et al. (1992) · Journal of the American Chemical Society · doi:10.1021/ja00053a020 · Cited by 10,967
Eddaoudi, M., Kim, J., Rosi, N., Vodak, D., Wachter, J., O'Keeffe, M., & Yaghi, O. M. (2002) · Science · doi:10.1126/science.1067208 · Cited by 8,132
A Chromium Terephthalate-Based Solid with Unusually Large Pore Volumes and Surface Area
Férey, G., Mellot-Draznieks, C., Serre, C., Millange, F., Dutour, J., Surblé, S., & Margiolaki, I. (2005) · Science · doi:10.1126/science.1116275 · Cited by 5,430
Carbon Dioxide Capture: Prospects for New Materials
D'Alessandro, D. M., Smit, B., & Long, J. R. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.201000431 · Cited by 4,046
Ultrahigh Porosity in Metal-Organic Frameworks
Furukawa, H., Ko, N., Go, Y. B., Aratani, N., Choi, S. B., Choi, E., Yazaydin, A. Ö., Snurr, R. Q., O’Keeffe, M., Kim, J., et al. (2010) · Science · doi:10.1126/science.1192160 · Cited by 3,904
Thermodynamics of mixed‐gas adsorption
Myers, A. L., & Prausnitz, J. M. (1965) · AIChE Journal · doi:10.1002/aic.690110125 · Cited by 3,775
An overview of current status of carbon dioxide capture and storage technologies
Leung, D. Y. C., Caramanna, G., & Maroto-Valer, M. M. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.07.093 · Cited by 3,198
Silica‐Based Mesoporous Organic–Inorganic Hybrid Materials
Hoffmann, F., Cornelius, M., Morell, J., & Fröba, M. (2006) · Angewandte Chemie International Edition · doi:10.1002/anie.200503075 · Cited by 3,089
Millward, A. R., & Yaghi, O. M. (2005) · Journal of the American Chemical Society · doi:10.1021/ja0570032 · Cited by 2,876
Synthesis, Structure, and Carbon Dioxide Capture Properties of Zeolitic Imidazolate Frameworks
Phan, A., Doonan, C. J., Uribe-Romo, F. J., Knobler, C. B., O’Keeffe, M., & Yaghi, O. M. (2010) · Accounts of Chemical Research · doi:10.1021/ar900116g · Cited by 2,618
Furukawa, H., & Yaghi, O. M. (2009) · Journal of the American Chemical Society · doi:10.1021/ja9015765 · Cited by 2,608
Adsorbent Materials for Carbon Dioxide Capture from Large Anthropogenic Point Sources
Choi, S., Drese, J. H., & Jones, C. W. (2009) · ChemSusChem · doi:10.1002/cssc.200900036 · Cited by 2,596
Adsorption — from theory to practice
Dąbrowski, A. (2001) · Advances in Colloid and Interface Science · doi:10.1016/s0001-8686(00)00082-8 · Cited by 2,375
Advances in CO2 capture technology—The U.S. Department of Energy's Carbon Sequestration Program
Figueroa, J. D., Fout, T., Plasynski, S., McIlvried, H., & Srivastava, R. D. (2008) · International Journal of Greenhouse Gas Control · doi:10.1016/s1750-5836(07)00094-1 · Cited by 2,281
Progress in Chemical-Looping Combustion and Reforming technologies
Adanez, J., Abad, A., Garcia-Labiano, F., Gayan, P., & de Diego, L. F. (2012) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2011.09.001 · Cited by 2,230
Large-Pore Apertures in a Series of Metal-Organic Frameworks
Deng, H., Grunder, S., Cordova, K. E., Valente, C., Furukawa, H., Hmadeh, M., Gándara, F., Whalley, A. C., Liu, Z., Asahina, S., et al. (2012) · Science · doi:10.1126/science.1220131 · Cited by 2,126
Progress in carbon dioxide separation and capture: A review
Yang, H., Xu, Z., Fan, M., Gupta, R., Slimane, R. B., Bland, A. E., & Wright, I. (2008) · Journal of Environmental Sciences · doi:10.1016/s1001-0742(08)60002-9 · Cited by 2,087
Carbon dioxide capture-related gas adsorption and separation in metal-organic frameworks
Li, J.-R., Ma, Y., McCarthy, M. C., Sculley, J., Yu, J., Jeong, H.-K., Balbuena, P. B., & Zhou, H.-C. (2011) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2011.02.012 · Cited by 2,019
Cabri, L. J. (1969) · The Canadian Mineralogist · Cited by 1,800
Farha, O. K., Özgür Yazaydın, A., Eryazici, I., Malliakas, C. D., Hauser, B. G., Kanatzidis, M. G., Nguyen, S. T., Snurr, R. Q., & Hupp, J. T. (2010) · Nature Chemistry · doi:10.1038/nchem.834 · Cited by 1,741
A Review of CO2 Capture by Absorption and Adsorption
Yu, C.-H., Huang, C.-H., & Tan, C.-S. (2012) · Aerosol and Air Quality Research · doi:10.4209/aaqr.2012.05.0132 · Cited by 1,730
Colossal cages in zeolitic imidazolate frameworks as selective carbon dioxide reservoirs
Wang, B., Côté, A. P., Furukawa, H., O’Keeffe, M., & Yaghi, O. M. (2008) · Nature · doi:10.1038/nature06900 · Cited by 1,581
Banerjee, R., Furukawa, H., Britt, D., Knobler, C., O’Keeffe, M., & Yaghi, O. M. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809459e · Cited by 1,443
Gas storage in porous metal–organic frameworks for clean energy applications
Ma, S., & Zhou, H.-C. (2010) · Chem. Commun. · doi:10.1039/b916295j · Cited by 1,349
Thermal energy storage technologies and systems for concentrating solar power plants
Kuravi, S., Trahan, J., Goswami, D. Y., Rahman, M. M., & Stefanakos, E. K. (2013) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2013.02.001 · Cited by 1,295
Interwoven Metal-Organic Framework on a Periodic Minimal Surface with Extra-Large Pores
Chen, B., Eddaoudi, M., Hyde, S. T., O'Keeffe, M., & Yaghi, O. M. (2001) · Science · doi:10.1126/science.1056598 · Cited by 1,265
Density functional theory methods for characterization of porous materials
Landers, J., Gor, G. Y., & Neimark, A. V. (2013) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2013.01.007 · Cited by 1,239
CO2 capture and separation technologies for end-of-pipe applications – A review
Olajire, A. A. (2010) · Energy · doi:10.1016/j.energy.2010.02.030 · Cited by 1,217
Recent advances in solid sorbents for CO2capture and new development trends
Wang, J., Huang, L., Yang, R., Zhang, Z., Wu, J., Gao, Y., Wang, Q., O'Hare, D., & Zhong, Z. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01647e · Cited by 1,168
High Uptakes of CO2 and CH4 in Mesoporous Metal—Organic Frameworks MIL-100 and MIL-101
Llewellyn, P. L., Bourrelly, S., Serre, C., Vimont, A., Daturi, M., Hamon, L., De Weireld, G., Chang, J.-S., Hong, D.-Y., Kyu Hwang, Y., et al. (2008) · Langmuir · doi:10.1021/la800227x · Cited by 1,156
A review of the multi-component utilisation of coal fly ash
Blissett, R. S., & Rowson, N. A. (2012) · Fuel · doi:10.1016/j.fuel.2012.03.024 · Cited by 1,154
Ordered macroporous materials by emulsion templating
Imhof, A., & Pine, D. J. (1997) · Nature · doi:10.1038/40105 · Cited by 1,150
Nanoporous organic polymer networks
Dawson, R., Cooper, A. I., & Adams, D. J. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.09.002 · Cited by 1,114
Hong, D., Hwang, Y. K., Serre, C., Férey, G., & Chang, J. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200801130 · Cited by 978
Férey, G., Serre, C., Mellot‐Draznieks, C., Millange, F., Surblé, S., Dutour, J., & Margiolaki, I. (2004) · Angewandte Chemie International Edition · doi:10.1002/anie.200460592 · Cited by 976
Adsorption of CO2, CH4, N2O, and N2 on MOF-5, MOF-177, and Zeolite 5A
Saha, D., Bao, Z., Jia, F., & Deng, S. (2010) · Environmental Science & Technology · doi:10.1021/es9032309 · Cited by 816
Recent developments on carbon capture and storage: An overview
Pires, J. C. M., Martins, F. G., Alvim-Ferraz, M. C. M., & Simões, M. (2011) · Chemical Engineering Research and Design · doi:10.1016/j.cherd.2011.01.028 · Cited by 811
Ordered mesoporous metal oxides: synthesis and applications
Ren, Y., Ma, Z., & Bruce, P. G. (2012) · Chemical Society Reviews · doi:10.1039/c2cs35086f · Cited by 768
Ren, S., Bojdys, M. J., Dawson, R., Laybourn, A., Khimyak, Y. Z., Adams, D. J., & Cooper, A. I. (2012) · Advanced Materials · doi:10.1002/adma.201200751 · Cited by 763
Huang, N., Chen, X., Krishna, R., & Jiang, D. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201411262 · Cited by 762
Made-to-order metal-organic frameworks for trace carbon dioxide removal and air capture
Shekhah, O., Belmabkhout, Y., Chen, Z., Guillerm, V., Cairns, A., Adil, K., & Eddaoudi, M. (2014) · Nature Communications · doi:10.1038/ncomms5228 · Cited by 713
A review on solid adsorbents for carbon dioxide capture
Lee, S.-Y., & Park, S.-J. (2015) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2014.09.001 · Cited by 707
Microporous Polycarbazole with High Specific Surface Area for Gas Storage and Separation
Chen, Q., Luo, M., Hammershøj, P., Zhou, D., Han, Y., Laursen, B. W., Yan, C.-G., & Han, B.-H. (2012) · Journal of the American Chemical Society · doi:10.1021/ja300438w · Cited by 704
A molecular sieve with eighteen-membered rings
Davis, M. E., Saldarriaga, C., Montes, C., Garces, J., & Crowdert, C. (1988) · Nature · doi:10.1038/331698a0 · Cited by 684
Rufford, T. E., Smart, S., Watson, G. C. Y., Graham, B. F., Boxall, J., Diniz da Costa, J. C., & May, E. F. (2012) · Journal of Petroleum Science and Engineering · doi:10.1016/j.petrol.2012.06.016 · Cited by 676
Advances in CO2 capture technology: A patent review
Li, B., Duan, Y., Luebke, D., & Morreale, B. (2013) · Applied Energy · doi:10.1016/j.apenergy.2012.09.009 · Cited by 657
Abad, A., Adánez, J., García-Labiano, F., de Diego, L. F., Gayán, P., & Celaya, J. (2007) · Chemical Engineering Science · doi:10.1016/j.ces.2006.09.019 · Cited by 644
Can Metal–Organic Framework Materials Play a Useful Role in Large‐Scale Carbon Dioxide Separations?
Keskin, S., van Heest, T. M., & Sholl, D. S. (2010) · ChemSusChem · doi:10.1002/cssc.201000114 · Cited by 610
Characterization of micro- and mesoporous solids by physisorption methods and pore-size analysis
Storck, S., Bretinger, H., & Maier, W. F. (1998) · Applied Catalysis A: General · doi:10.1016/s0926-860x(98)00164-1 · Cited by 602
Bastani, D., Esmaeili, N., & Asadollahi, M. (2013) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2012.09.019 · Cited by 597
Flue gas treatment via CO2 adsorption
Sayari, A., Belmabkhout, Y., & Serna-Guerrero, R. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.02.007 · Cited by 594
High-Pressure Adsorption Equilibria of Methane and Carbon Dioxide on Several Activated Carbons
Himeno, S., Komatsu, T., & Fujita, S. (2005) · Journal of Chemical & Engineering Data · doi:10.1021/je049786x · Cited by 592
Microporous organic polymers for carbon dioxide capture
Dawson, R., Stöckel, E., Holst, J. R., Adams, D. J., & Cooper, A. I. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01971f · Cited by 590
CO2capture and conversion using Mg-MOF-74 prepared by a sonochemical method
Yang, D.-A., Cho, H.-Y., Kim, J., Yang, S.-T., & Ahn, W.-S. (2012) · Energy Environ. Sci. · doi:10.1039/c1ee02234b · Cited by 585
Polyamine‐Tethered Porous Polymer Networks for Carbon Dioxide Capture from Flue Gas
Lu, W., Sculley, J. P., Yuan, D., Krishna, R., Wei, Z., & Zhou, H. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201202176 · Cited by 581
Sulfonate-Grafted Porous Polymer Networks for Preferential CO2 Adsorption at Low Pressure
Lu, W., Yuan, D., Sculley, J., Zhao, D., Krishna, R., & Zhou, H.-C. (2011) · Journal of the American Chemical Society · doi:10.1021/ja2087773 · Cited by 571
Hao, G.-P., Li, W.-C., Qian, D., Wang, G.-H., Zhang, W.-P., Zhang, T., Wang, A.-Q., Schüth, F., Bongard, H.-J., & Lu, A.-H. (2011) · Journal of the American Chemical Society · doi:10.1021/ja203857g · Cited by 569
Recent developments in membrane-based technologies for CO2 capture
Luis, P., Van Gerven, T., & Van der Bruggen, B. (2012) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2012.01.004 · Cited by 529
Adsorption of CO2 and CH4 on a magnesium-based metal organic framework
Bao, Z., Yu, L., Ren, Q., Lu, X., & Deng, S. (2011) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2010.09.065 · Cited by 527
Mesoporous materials for clean energy technologies
Linares, N., Silvestre-Albero, A. M., Serrano, E., Silvestre-Albero, J., & García-Martínez, J. (2014) · Chem. Soc. Rev. · doi:10.1039/c3cs60435g · Cited by 526
CO2 capture by adsorption with nitrogen enriched carbons
Plaza, M. G., Pevida, C., Arenillas, A., Rubiera, F., & Pis, J. J. (2007) · Fuel · doi:10.1016/j.fuel.2007.06.001 · Cited by 505
A comprehensive review of direct carbon fuel cell technology
Giddey, S., Badwal, S. P. S., Kulkarni, A., & Munnings, C. (2012) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2012.01.003 · Cited by 499
Gokmen, M. T., & Du Prez, F. E. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.07.006 · Cited by 492
A Superacid-Catalyzed Synthesis of Porous Membranes Based on Triazine Frameworks for CO2 Separation
Zhu, X., Tian, C., Mahurin, S. M., Chai, S.-H., Wang, C., Brown, S., Veith, G. M., Luo, H., Liu, H., & Dai, S. (2012) · Journal of the American Chemical Society · doi:10.1021/ja304879c · Cited by 490
A Porous Coordination Copolymer with over 5000 m2/g BET Surface Area
Koh, K., Wong-Foy, A. G., & Matzger, A. J. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809985t · Cited by 487
Adsorption of carbon dioxide at high temperature—a review
YONG, Z., MATA, V, & RODRIGUES, A. (2002) · Separation and Purification Technology · doi:10.1016/s1383-5866(01)00165-4 · Cited by 486
Natural gas treating by selective adsorption: Material science and chemical engineering interplay
Tagliabue, M., Farrusseng, D., Valencia, S., Aguado, S., Ravon, U., Rizzo, C., Corma, A., & Mirodatos, C. (2009) · Chemical Engineering Journal · doi:10.1016/j.cej.2009.09.010 · Cited by 471
Lukens, Schmidt-Winkel, P., Zhao, D., Feng, J., & Stucky, G. D. (1999) · Langmuir · doi:10.1021/la990209u · Cited by 471
Dunne, J. A., Rao, M., Sircar, S., Gorte, R. J., & Myers, A. L. (1996) · Langmuir · doi:10.1021/la960496r · Cited by 468
Rabbani, M. G., & El-Kaderi, H. M. (2012) · Chemistry of Materials · doi:10.1021/cm300407h · Cited by 461
Evaluation of cation-exchanged zeolite adsorbents for post-combustion carbon dioxide capture
Bae, T.-H., Hudson, M. R., Mason, J. A., Queen, W. L., Dutton, J. J., Sumida, K., Micklash, K. J., Kaye, S. S., Brown, C. M., & Long, J. R. (2013) · Energy Environ. Sci. · doi:10.1039/c2ee23337a · Cited by 437
Carbon dioxide capture using biochar produced from sugarcane bagasse and hickory wood
Creamer, A. E., Gao, B., & Zhang, M. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.03.105 · Cited by 432
Hedin, N., Andersson, L., Bergström, L., & Yan, J. (2013) · Applied Energy · doi:10.1016/j.apenergy.2012.11.034 · Cited by 424
Steeneveldt, R., Berger, B., & Torp, T. A. (2006) · Chemical Engineering Research and Design · doi:10.1205/cherd05049 · Cited by 424
Coombs, D. S., Alberti, A., Armbruster, T., Artioli, G., Colella, C., Galli, E., Grice, J. D., Liebau, F., Mandarino, J. A., Minato, H., et al. (1998) · Mineralogical Magazine · doi:10.1180/002646198547800 · Cited by 404
Franchi, R. S., Harlick, P. J. E., & Sayari, A. (2005) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0504194 · Cited by 400
Dunne, J. A., Mariwala, R., Rao, M., Sircar, S., Gorte, R. J., & Myers, A. L. (1996) · Langmuir · doi:10.1021/la960495z · Cited by 398
Chemistry of Zeolites and Related Porous Materials: Synthesis and Structure
Xu, R., Pang, W., Yu, J., Huo, Q., & Chen, J. (2007) · Wiley eBooks · doi:10.1002/9780470822371 · Cited by 393
CO2 adsorption and catalytic application of Co-MOF-74 synthesized by microwave heating
Cho, H.-Y., Yang, D.-A., Kim, J., Jeong, S.-Y., & Ahn, W.-S. (2012) · Catalysis Today · doi:10.1016/j.cattod.2011.08.019 · Cited by 381
Mesoporous Metal–Organic Framework with Rare etb Topology for Hydrogen Storage and Dye Assembly
Fang, Q., Zhu, G., Jin, Z., Ji, Y., Ye, J., Xue, M., Yang, H., Wang, Y., & Qiu, S. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200700537 · Cited by 370
Li, Q., Yang, J., Feng, D., Wu, Z., Wu, Q., Park, S. S., Ha, C.-S., & Zhao, D. (2010) · Nano Research · doi:10.1007/s12274-010-0023-7 · Cited by 369
Zhu, Y., Long, H., & Zhang, W. (2013) · Chemistry of Materials · doi:10.1021/cm400019f · Cited by 366
Structuring adsorbents and catalysts by processing of porous powders
Akhtar, F., Andersson, L., Ogunwumi, S., Hedin, N., & Bergström, L. (2014) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2014.01.008 · Cited by 363
Adsorption of CO2 on Amine-Functionalized Y-Type Zeolites
Su, F., Lu, C., Kuo, S.-C., & Zeng, W. (2010) · Energy & Fuels · doi:10.1021/ef901077k · Cited by 359
Zhao, D., Yuan, D., Sun, D., & Zhou, H.-C. (2009) · Journal of the American Chemical Society · doi:10.1021/ja901109t · Cited by 339
Aminopropyl-functionalized mesoporous silicas as CO2 adsorbents
Knowles, G. P., Graham, J. V., Delaney, S. W., & Chaffee, A. L. (2005) · Fuel Processing Technology · doi:10.1016/j.fuproc.2005.01.014 · Cited by 326
Adsorption of synthetic organic contaminants by carbon nanotubes: A critical review
Apul, O. G., & Karanfil, T. (2015) · Water Research · doi:10.1016/j.watres.2014.09.032 · Cited by 320
Microwave synthesis and characterization of MOF-74 (M=Ni, Mg) for gas separation
Wu, X., Bao, Z., Yuan, B., Wang, J., Sun, Y., Luo, H., & Deng, S. (2013) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2013.06.023 · Cited by 314
Polyethyleneimine Incorporated Metal-Organic Frameworks Adsorbent for Highly Selective CO2 Capture
Lin, Y., Yan, Q., Kong, C., & Chen, L. (2013) · Scientific Reports · doi:10.1038/srep01859 · Cited by 311
In silico screening of zeolite membranes for CO2 capture
Krishna, R., & van Baten, J. M. (2010) · Journal of Membrane Science · doi:10.1016/j.memsci.2010.05.032 · Cited by 307
Adánez, J., Gayán, P., Celaya, J., de Diego, L. F., García-Labiano, F., & Abad, A. (2006) · Industrial & Engineering Chemistry Research · doi:10.1021/ie060364l · Cited by 307
Zhang, J., Webley, P. A., & Xiao, P. (2008) · Energy Conversion and Management · doi:10.1016/j.enconman.2007.06.007 · Cited by 298
Structured adsorbents in gas separation processes
Rezaei, F., & Webley, P. (2010) · Separation and Purification Technology · doi:10.1016/j.seppur.2009.10.004 · Cited by 294
Operation of a 10 kWth chemical-looping combustor during 200 h with a CuO–Al2O3 oxygen carrier
de Diego, L. F., Garcı´a-Labiano, F., Gayán, P., Celaya, J., Palacios, J. M., & Adánez, J. (2007) · Fuel · doi:10.1016/j.fuel.2006.10.004 · Cited by 292
Mohanty, P., Kull, L. D., & Landskron, K. (2011) · Nature Communications · doi:10.1038/ncomms1405 · Cited by 282
Sustainable biomass-based carbon adsorbents for post-combustion CO2 capture
González, A. S., Plaza, M. G., Rubiera, F., & Pevida, C. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.06.118 · Cited by 280
Modak, A., Nandi, M., Mondal, J., & Bhaumik, A. (2012) · Chem. Commun. · doi:10.1039/c1cc14275e · Cited by 279
African Journal of Pure and Applied Chemistry
(2026) · African Journal of Pure and Applied Chemistry · doi:10.5897/ajpac · Cited by 278
Evaluation of solid sorbents as a retrofit technology for CO2 capture
Sjostrom, S., & Krutka, H. (2010) · Fuel · doi:10.1016/j.fuel.2009.11.019 · Cited by 271
CO2 capture using some fly ash-derived carbon materials
Arenillas, A., Smith, K. M., Drage, T. C., & Snape, C. E. (2005) · Fuel · doi:10.1016/j.fuel.2005.04.003 · Cited by 263
Drage, T. C., Arenillas, A., Smith, K. M., Pevida, C., Piippo, S., & Snape, C. E. (2007) · Fuel · doi:10.1016/j.fuel.2006.07.003 · Cited by 259
Carbogenic molecular sieves: synthesis, properties and applications
Foley, H. C. (1995) · Microporous Materials · doi:10.1016/0927-6513(95)00014-z · Cited by 254
Post combustion CO2 capture by carbon fibre monolithic adsorbents
Thiruvenkatachari, R., Su, S., An, H., & Yu, X. X. (2009) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2009.05.003 · Cited by 251
A hybrid absorption–adsorption method to efficiently capture carbon
Liu, H., Liu, B., Lin, L.-C., Chen, G., Wu, Y., Wang, J., Gao, X., Lv, Y., Pan, Y., Zhang, X., et al. (2014) · Nature Communications · doi:10.1038/ncomms6147 · Cited by 251
Katsoulidis, A. P., & Kanatzidis, M. G. (2011) · Chemistry of Materials · doi:10.1021/cm103206x · Cited by 248
Amine loaded zeolites for carbon dioxide capture: Amine loading and adsorption studies
Chatti, R., Bansiwal, A. K., Thote, J. A., Kumar, V., Jadhav, P., Lokhande, S. K., Biniwale, R. B., Labhsetwar, N. K., & Rayalu, S. S. (2009) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2009.01.007 · Cited by 240
Determination of the optimal pore size for improved CO2 adsorption in activated carbon fibers
Lee, S.-Y., & Park, S.-J. (2013) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2012.09.018 · Cited by 239
Liu, Q., Ning, L., Zheng, S., Tao, M., Shi, Y., & He, Y. (2013) · Scientific Reports · doi:10.1038/srep02916 · Cited by 238
Development of new CaO based sorbent materials for CO2 removal at high temperature
Martavaltzi, C. S., & Lemonidou, A. A. (2008) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2007.10.006 · Cited by 237
Research and development issues in CO2 capture
Meisen, A., & Shuai, X. (1997) · Energy Conversion and Management · doi:10.1016/s0196-8904(96)00242-7 · Cited by 235
Membrane processes and postcombustion carbon dioxide capture: Challenges and prospects
Favre, E. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.01.010 · Cited by 235
Synthesis and characterization of zeolites prepared from industrial fly ash
Franus, W., Wdowin, M., & Franus, M. (2014) · Environmental Monitoring and Assessment · doi:10.1007/s10661-014-3815-5 · Cited by 227
Development and performance of Cu-based oxygen carriers for chemical-looping combustion
CHUANG, S., DENNIS, J., HAYHURST, A., & SCOTT, S. (2008) · Combustion and Flame · doi:10.1016/j.combustflame.2007.10.005 · Cited by 225
Screening of CO2 Adsorbing Materials for Zero Emission Power Generation Systems
Feng, B., An, H., & Tan, E. (2007) · Energy & Fuels · doi:10.1021/ef0604036 · Cited by 224
Colombo, V., Montoro, C., Maspero, A., Palmisano, G., Masciocchi, N., Galli, S., Barea, E., & Navarro, J. A. R. (2012) · Journal of the American Chemical Society · doi:10.1021/ja305267m · Cited by 221
Amino-functionalized mesoporous silica as base catalyst and adsorbent
Yokoi, T., Kubota, Y., & Tatsumi, T. (2012) · Applied Catalysis A: General · doi:10.1016/j.apcata.2012.02.004 · Cited by 219
Holst, J. R., Stöckel, E., Adams, D. J., & Cooper, A. I. (2010) · Macromolecules · doi:10.1021/ma101677t · Cited by 218
Carbon dioxide–nitrogen separation through adsorption on activated carbon in a fixed bed
Dantas, T. L. P., Luna, F. M. T., Silva, I. J., de Azevedo, D. C. S., Grande, C. A., Rodrigues, A. E., & Moreira, R. F. P. M. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2010.08.026 · Cited by 218
Ordered mesoporous silica (OMS) as an adsorbent and membrane for separation of carbon dioxide (CO2)
Chew, T.-L., Ahmad, A. L., & Bhatia, S. (2010) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2009.12.001 · Cited by 218
A journey into the process and engineering aspects of carbon capture technologies
Sreenivasulu, B., Gayatri, D. V., Sreedhar, I., & Raghavan, K. V. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.09.029 · Cited by 205
Self-citationLinderholm, C., Mattisson, T., & Lyngfelt, A. (2009) · Fuel · doi:10.1016/j.fuel.2008.12.018 · Cited by 198
Experimental results of chemical-looping combustion with NiO/NiAl2O4 particle circulation at 1200 °C
Ishida, M., Yamamoto, M., & Ohba, T. (2002) · Energy Conversion and Management · doi:10.1016/s0196-8904(02)00029-8 · Cited by 191
Capture technologies: Improvements and promising developments
Blomen, E., Hendriks, C., & Neele, F. (2009) · Energy Procedia · doi:10.1016/j.egypro.2009.01.197 · Cited by 188
Numerical parametric study on CO2 capture by indirect thermal swing adsorption
Clausse, M., Merel, J., & Meunier, F. (2011) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2011.05.036 · Cited by 185
Low-temperature CO2 capture technologies – Applications and potential
Berstad, D., Anantharaman, R., & Nekså, P. (2013) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2013.03.017 · Cited by 184
Carbon Dioxide Capture from Air Using Amine-Grafted Porous Polymer Networks
Lu, W., Sculley, J. P., Yuan, D., Krishna, R., & Zhou, H.-C. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp311512q · Cited by 180
Arami-Niya, A., Wan Daud, W. M. A., S. Mjalli, F., Abnisa, F., & Shafeeyan, M. S. (2012) · Chemical Engineering Research and Design · doi:10.1016/j.cherd.2011.10.001 · Cited by 179
MgO/Al2O3 Sorbent for CO2 Capture
Li, L., Wen, X., Fu, X., Wang, F., Zhao, N., Xiao, F., Wei, W., & Sun, Y. (2010) · Energy & Fuels · doi:10.1021/ef100817f · Cited by 178
Adsorption Equilibrium and Kinetics of CO2 on Chromium Terephthalate MIL-101
Zhang, Z., Huang, S., Xian, S., Xi, H., & Li, Z. (2011) · Energy & Fuels · doi:10.1021/ef101548g · Cited by 176
Yao, S., Yang, X., Yu, M., Zhang, Y., & Jiang, J.-X. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta00375f · Cited by 169
Breakthrough adsorption study of a commercial activated carbon for pre-combustion CO2 capture
García, S., Gil, M. V., Martín, C. F., Pis, J. J., Rubiera, F., & Pevida, C. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.04.027 · Cited by 166
Park, H. J., & Suh, M. P. (2013) · Chem. Sci. · doi:10.1039/c2sc21253f · Cited by 166
Industrial wastes derived solid adsorbents for CO2 capture: A mini review
Kaithwas, A., Prasad, M., Kulshreshtha, A., & Verma, S. (2012) · Chemical Engineering Research and Design · doi:10.1016/j.cherd.2012.02.011 · Cited by 165
Solubility of carbon dioxide in 2-amino-2-methyl-1-propanol solutions
Tontiwachwuthikul, P., Meisen, A., & Lim, C. J. (1991) · Journal of Chemical & Engineering Data · doi:10.1021/je00001a038 · Cited by 165
Electric Swing Adsorption for CO2 removal from flue gases
Grande, C. A., & Rodrigues, A. E. (2007) · International journal of greenhouse gas control · doi:10.1016/s1750-5836(07)00116-8 · Cited by 161
Direct CO2 capture from ambient air using K2CO3/Al2O3 composite sorbent
Veselovskaya, J. V., Derevschikov, V. S., Kardash, T. Y., Stonkus, O. A., Trubitsina, T. A., & Okunev, A. G. (2013) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2013.05.006 · Cited by 161
Rabbani, M. G., Sekizkardes, A. K., El-Kadri, O. M., Kaafarani, B. R., & El-Kaderi, H. M. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm34922a · Cited by 161
Post-combustion CO2 capture using mesoporous TiO2/graphene oxide nanocomposites
Chowdhury, S., Parshetti, G. K., & Balasubramanian, R. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.11.037 · Cited by 158
Dueso, C., Garcı́a-Labiano, F., Adánez, J., de Diego, L. F., Gayán, P., & Abad, A. (2008) · Fuel · doi:10.1016/j.fuel.2008.11.026 · Cited by 155
Novel Pore-Expanded MCM-41 for CO2 Capture: Synthesis and Characterization
Loganathan, S., Tikmani, M., & Ghoshal, A. K. (2013) · Langmuir · doi:10.1021/la400109j · Cited by 154
Su, F., Lu, C., & Chen, H.-S. (2011) · Langmuir · doi:10.1021/la201745y · Cited by 148
Advanced adsorbents based on MgO and K2CO3 for capture of CO2 at elevated temperatures
Xiao, G., Singh, R., Chaffee, A. L., & Webley, P. A. (2011) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2011.04.002 · Cited by 146
Investigation of Porous Silica Supported Mixed-Amine Sorbents for Post-Combustion CO2 Capture
Fauth, D. J., Gray, M. L., Pennline, H. W., Krutka, H. M., Sjostrom, S., & Ault, A. M. (2012) · Energy & Fuels · doi:10.1021/ef201578a · Cited by 143
Schach, M., Schneider, R., Schramm, H., & Repke, J. (2010) · Industrial & Engineering Chemistry Research · doi:10.1021/ie900514t · Cited by 142
Application of Eggshell Wastes as a Heterogeneous Catalyst for Biodiesel Production
Buasri, A., Chaiyut, N., Loryuenyong, V., Wongweang, C., & Khamsrisuk, S. (2013) · doi:10.12691/rse-1-2-1 · Cited by 142
He, F., Wei, Y., Li, H., & Wang, H. (2009) · Energy & Fuels · doi:10.1021/ef800922m · Cited by 140
CO2 adsorption performance of amino-functionalized SBA-15 under post-combustion conditions
Sanz-Pérez, E. S., Olivares-Marín, M., Arencibia, A., Sanz, R., Calleja, G., & Maroto-Valer, M. M. (2013) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2013.05.011 · Cited by 140
Li, Y., Ben, T., Zhang, B., Fu, Y., & Qiu, S. (2013) · Scientific Reports · doi:10.1038/srep02420 · Cited by 138
Ordered mesoporous phenolic resins: Highly versatile and ultra stable support materials
Muylaert, I., Verberckmoes, A. A., Decker, J. D., & Voort, P. V. D. (2012) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2012.03.007 · Cited by 138
Wang, X.-J., Li, P., Chen, Y., Zhang, Q., Zhang, H., Chan, X. X., Ganguly, R., Li, Y., Jiang, J., & Zhao, Y. (2013) · Scientific Reports · doi:10.1038/srep01149 · Cited by 136
CO2 adsorption on carbon molecular sieves
Wahby, A. S. M., Silvestre‐Albero, J., Sepúlveda‐Escribano, A., & Rodríguez-Reinoso, F. (2012) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2012.06.034 · Cited by 136
A comparative study of CO2 sorption properties for different oxides
Kumar, S., & Saxena, S. K. (2014) · Materials for Renewable and Sustainable Energy · doi:10.1007/s40243-014-0030-9 · Cited by 135
CO2 capture by electrothermal swing adsorption with activated carbon fibre materials
An, H., Feng, B., & Su, S. (2010) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2010.03.007 · Cited by 135
Microporous adsorbents for CO2 capture – a case for microporous polymers?
Xu, C., & Hedin, N. (2014) · Materials Today · doi:10.1016/j.mattod.2014.05.007 · Cited by 131
Zeolites—from kitchen to space
Ghobarkar, H., Schäf, O., & Guth, U. (1999) · Progress in Solid State Chemistry · doi:10.1016/s0079-6786(00)00002-9 · Cited by 130
Lime-Based Sorbents for High-Temperature CO2 Capture—A Review of Sorbent Modification Methods
Manovic, V. M., & Anthony, E. J. (2010) · International Journal of Environmental Research and Public Health · doi:10.3390/ijerph7083129 · Cited by 130
Amine-Functionalized Metal Organic Framework as a Highly Selective Adsorbent for CO2 over CO
Wang, X., Li, H., & Hou, X. (2012) · The Journal of Physical Chemistry C · doi:10.1021/jp3052938 · Cited by 129
On the limits of CO2 capture capacity of carbons
Martín, C. F., Plaza, M. G., Pis, J. J., Rubiera, F., Pevida, C., & Centeno, T. A. (2010) · Separation and Purification Technology · doi:10.1016/j.seppur.2010.06.009 · Cited by 127
Unified Maxwell–Stefan description of binary mixture diffusion in micro- and meso-porous materials
Krishna, R., & van Baten, J. M. (2009) · Chemical Engineering Science · doi:10.1016/j.ces.2009.03.047 · Cited by 127
Comparison of CO2 capture economics for iron and steel mills
Ho, M. T., Bustamante, A., & Wiley, D. E. (2013) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2013.08.003 · Cited by 126
A solid with a hierarchical tetramodal micro-meso-macro pore size distribution
Ren, Y., Ma, Z., Morris, R. E., Liu, Z., Jiao, F., Dai, S., & Bruce, P. G. (2013) · Nature Communications · doi:10.1038/ncomms3015 · Cited by 126
Wang, X., Guo, Q., & Kong, T. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.03.098 · Cited by 123
Kinetic studies on carbon dioxide capture using lignocellulosic based activated carbon
Rashidi, N. A., Yusup, S., & Hameed, B. H. (2013) · Energy · doi:10.1016/j.energy.2013.08.050 · Cited by 122
Asphalt-Derived High Surface Area Activated Porous Carbons for Carbon Dioxide Capture
Jalilov, A. S., Ruan, G., Hwang, C.-C., Schipper, D., Tour, J. J., Li, Y., Fei, H., Samuel, E. L. G., & Tour, J. M. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am508858x · Cited by 119
Pure silica CHA type zeolite for CO2 separation using pressure swing adsorption at high pressure
Miyamoto, M., Fujioka, Y., & Yogo, K. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm34597h · Cited by 118
Hollow Microporous Organic Capsules
Li, B., Yang, X., Xia, L., Majeed, M. I., & Tan, B. (2013) · Scientific Reports · doi:10.1038/srep02128 · Cited by 117
Effects of water vapour on CO2 capture with vacuum swing adsorption using activated carbon
Xu, D., Xiao, P., Zhang, J., Li, G., Xiao, G., Webley, P. A., & Zhai, Y. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.06.080 · Cited by 112
Cage type mesoporous carbon nitride with large mesopores for CO2 capture
Lakhi, K. S., Cha, W. S., Joseph, S., Wood, B., Al‐Deyab, S. S., Lawrence, G., Choy, J., & Vinu, A. (2014) · Catalysis Today · doi:10.1016/j.cattod.2014.08.036 · Cited by 111
Novel Regenerable Sodium-Based Sorbents for CO2 Capture at Warm Gas Temperatures
Siriwardane, R. V., Robinson, C., Shen, M., & Simonyi, T. (2007) · Energy & Fuels · doi:10.1021/ef070008v · Cited by 109
Sung, S., & Suh, M. P. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta02861a · Cited by 107
Capture of carbon dioxide by amine-impregnated as-synthesized MCM-41
Wei, J., Liao, L., Xiao, Y., Zhang, P., & Shi, Y. (2010) · Journal of Environmental Sciences · doi:10.1016/s1001-0742(09)60289-8 · Cited by 103
Kang, X., Zhang, J., Shang, W., Wu, T., Zhang, P., Han, B., Wu, Z., Mo, G., & Xing, X. (2014) · Journal of the American Chemical Society · doi:10.1021/ja5001517 · Cited by 103
Plaza, M. G., García, S., Rubiera, F., Pis, J. J., & Pevida, C. (2011) · Separation and Purification Technology · doi:10.1016/j.seppur.2011.04.015 · Cited by 100
Advanced Physical Adsorption Characterization of Nanoporous Carbons
Thommes, M., Cychosz, K. A., & Neimark, A. V. (2012) · Elsevier eBooks · doi:10.1016/b978-0-08-097744-7.00004-1 · Cited by 97
Molecular Sieve Zeolite Technology: The First Twenty-Five Years
Flanigen, E. M. (1984) · Springer eBooks · doi:10.1007/978-94-009-6128-9_1 · Cited by 97
Sol–Gel-Derived NiO/NiAl 2 O 4 Oxygen Carriers for Chemical-Looping Combustion by Coal Char
Zhao, H., Liu, L., Wang, B., Xu, D., Jiang, L., & Zheng, C. (2008) · Energy & Fuels · doi:10.1021/ef7003859 · Cited by 97
Carbon dioxide absorption studies using amine-functionalized ionic liquids
Sistla, Y. S., & Khanna, A. (2013) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2013.10.032 · Cited by 96
Flash freezing route to mesoporous polymer nanofibre networks
Samitsu, S., Zhang, R., Peng, X., Krishnan, M. R., Fujii, Y., & Ichinose, I. (2013) · Nature Communications · doi:10.1038/ncomms3653 · Cited by 96
Gil, M. V., Álvarez-Gutiérrez, N., Martínez, M., Rubiera, F., Pevida, C., & Morán, A. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.01.100 · Cited by 96
Wang, L., Yang, Y., Shen, W., Kong, X., Li, P., Yu, J., & Rodrigues, A. E. (2013) · Chemical Engineering Science · doi:10.1016/j.ces.2013.07.028 · Cited by 96
Characteristics of an advanced carbon sorbent for CO2 capture
Hornbostel, M. D., Bao, J., Krishnan, G. R., Nagar, A., Jayaweera, I. S., Kobayashi, T., Sanjurjo, A., Sweeney, J. B., Carruthers, D., Petruska, M. A., et al. (2013) · Carbon · doi:10.1016/j.carbon.2012.12.082 · Cited by 96
Mesoporous carbon originated from non-permanent porous MOFs for gas storage and CO2/CH4 separation
Wang, W., & Yuan, D. (2014) · Scientific Reports · doi:10.1038/srep05711 · Cited by 93
Duan, X., Srinivasakannan, C., Qu, W., Xin, W., Peng, J., & Zhang, L. (2012) · Chemical Engineering and Processing - Process Intensification · doi:10.1016/j.cep.2011.12.011 · Cited by 90
Zhou, L., Fan, J., Cui, G., Shang, X., Tang, Q., Wang, J., & Fan, M. (2014) · Green Chemistry · doi:10.1039/c4gc00832d · Cited by 90
CO2 Capture over K2CO3/MgO/Al2O3 Dry Sorbent in a Fluidized Bed
Li, L., Li, Y., Wen, X., Wang, F., Zhao, N., Xiao, F., Wei, W., & Sun, Y. (2011) · Energy & Fuels · doi:10.1021/ef200499b · Cited by 90
Mesoporous Poly(Melamine–Formaldehyde) Solid Sorbent for Carbon Dioxide Capture
Tan, M. X., Zhang, Y., & Ying, J. Y. (2013) · ChemSusChem · doi:10.1002/cssc.201300107 · Cited by 86
Ribeiro, R. P. P. L., Grande, C. A., & Rodrigues, A. E. (2013) · Chemical Engineering Science · doi:10.1016/j.ces.2013.09.011 · Cited by 85
Jing, Y., Wei, L., Wang, Y., & Yu, Y. (2013) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2013.09.008 · Cited by 84
Tailoring Metal–Organic Frameworks for CO2 Capture: The Amino Effect
Vitillo, J. G., Savonnet, M., Ricchiardi, G., & Bordiga, S. (2011) · ChemSusChem · doi:10.1002/cssc.201000458 · Cited by 82
Moving bed adsorption process with internal heat integration for carbon dioxide capture
Kim, K., Son, Y., Lee, W. B., & Lee, K. S. (2013) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2013.04.005 · Cited by 80
Synthesis of polymer–inorganic filler nanocomposites in supercritical CO2
Haldorai, Y., Shim, J., & Lim, K. T. (2012) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2012.07.007 · Cited by 80
Molecular sieve carbons for CO2 capture
Carruthers, J. D., Petruska, M. A., Sturm, E., & Wilson, S. M. (2011) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2011.07.016 · Cited by 78
Ship-in-a-bottle synthesis of amine-functionalized ionic liquids in NaY zeolite for CO2 capture
Yu, Y., Mai, J., Wang, L., Li, X., Jiang, Z., & Wang, F. (2014) · Scientific Reports · doi:10.1038/srep05997 · Cited by 78
Gomes, R., & Bhaumik, A. (2014) · Journal of Solid State Chemistry · doi:10.1016/j.jssc.2014.10.032 · Cited by 77
Laminated Adsorbents with Very Rapid CO2 Uptake by Freeze-Casting of Zeolites
Ojuva, A., Akhtar, F., Tomsia, A. P., & Bergström, L. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am400122r · Cited by 77
Novel Porphyrinic Porous Organic Frameworks for High Performance Separation of Small Hydrocarbons
Ma, H., Ren, H., Meng, S. M., Sun, F., & Zhu, G. (2013) · Scientific Reports · doi:10.1038/srep02611 · Cited by 77
Raganati, F., Ammendola, P., & Chirone, R. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.08.073 · Cited by 75
Development of amino acid and amino acid-complex based solid sorbents for CO2 capture
Jiang, B., Wang, X., Gray, M. L., Duan, Y., Luebke, D. R., & Li, B. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.03.070 · Cited by 75
Grafting of Amines on Ethanol-Extracted SBA-15 for CO2 Adsorption
Li, Y., Sun, N., Li, L., Zhao, N., Xiao, F., Wei, W., Sun, Y., & Huang, W. (2013) · Materials · doi:10.3390/ma6030981 · Cited by 69
Research works printed but not linked: 24
- 10.1016/j.cherd.2012.02.011 · DOI
- 10.1016/S0196-8904(96)00242-7 · DOI · Paper page
- 2014, Design and Synthesis of Nitrogen-Doped Porous Carbon Materials for CO2 Capture and Investigation of CO2 Sorption Kinetics; 2.4.2
- Coombs D. S., 1997, Canadian Mineralogist, 35, 1571
- Collart, O.Nano design of an Aluminosilicate Framework into a mesoporous MCM-4A Architecture. Ph.D. Dissertation,Universiteti, Antwerpen, 2003.
- Kangwanwatana W., 2013, Chemical Engineering Transactions., 35, 1
- DRAFT: Technology and Applied R&D Needs for Carbon Capture- Beyond 2020, Resource Document for the Workshop on Basic Research needs for Carbon Capture: Beyond 2020, March, 2010, U.S. Department of Energy.
- 10.1016/j.apenergy.2012.11.034 · DOI · Paper page
- 10.1016/j.ijggc.2012.12.014 · DOI
- Buasri A., 2013, Sustainable Energy., 1, 7
- 10.1016/j.fuel.2009.11.019 · DOI · Paper page
- Songolzadeh M., 2012, Sci. World J., 6, 213
- Fauth D. J., 2003, Fuel Chemistry Division Preprints., 48, 169
- Kotyczka-Moranska M., 2012, Adv. Mater. Res., 48, 77
- Dangi G. P., 2012, Indian J. Chem., 51, 1238
- Ramírez-Moreno M. J., 2014, Alkaline and Alkaline-Earth Ceramic Oxides for CO2 Capture, Separation and Subsequent Catalytic Chemical Conversion, Intech
- 10.1039/C4EE01647E · DOI · Paper page
- Ouyang S., 2011, Sustain. Environ. Res., 21, 21
- 10.1016/j.apenergy.2014.02.012 · DOI
- Sciubidło A., 2012, Journal of Power Technologies., 92, 115
- Cho, P.Development and Characterisation of Oxygen-Carrier Materials for Chemical-Looping Combustion, Ph.D. Dissertation,Chalmers University of Technology, Göteborg, Sweden, 2005.
- Aydoğdu, B.Comparison of sorption capacities of hydrocarbons on different samples of MCM-41, Ph.D. Dissertation,Middle East Technical University,Turkey, 2013.
- Hanapimat, K. S. N. K.Synthesis and modification of micro and mesoporous materials as CO 2 adsorbents, Ph.D. Dissertation,Universiti Teknologi Malaysia,Malaysia, 2009.
- Kleitz, F.Ordered Mesoporous Materials: Template Removal, Frameworks and Morphology, Ph.D. Dissertation,Ruhr University Bochum,Germany, 2002.
Cited by
Emerging Multifunctional Metal–Organic Framework Materials
Li, B., Wen, H., Cui, Y., Zhou, W., Qian, G., & Chen, B. (2016) · Advanced Materials · doi:10.1002/adma.201601133 · Cited by 1,587
Porous Organic Polymers for Post‐Combustion Carbon Capture
Zou, L., Sun, Y., Che, S., Yang, X., Wang, X., Bosch, M., Wang, Q., Li, H., Smith, M., Yuan, S., et al. (2017) · Advanced Materials · doi:10.1002/adma.201700229 · Cited by 432
Selective capture of carbon dioxide from hydrocarbons using a metal-organic framework
Qazvini, O. T., Babarao, R., & Telfer, S. G. (2021) · Nature Communications · doi:10.1038/s41467-020-20489-2 · Cited by 350
Acidity and basicity of zeolites: A fundamental approach
Busca, G. (2017) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2017.04.007 · Cited by 290
Ding, N., Li, H., Feng, X., Wang, Q., Wang, S., Ma, L., Zhou, J., & Wang, B. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b06051 · Cited by 275
Metadata
- Authors
- Sreenivasulu, B., Sreedhar, I., Suresh, P., & Raghavan, K. V.
- Affiliations
- Birla Institute of Technology and Science - Hyderabad Campus (IN)
- Granules India Ltd, Gagillapur, Hyderabad, India
- Indian Institute of Chemical Technology (IN)
- Corresponding author
- Sreedhar, Inkollu
- Venue
- Environmental Science & Technology
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-10-14
- Volume
- 49
- Issue
- 21
- Pages
- 12641-12661
- ISSN
- 0013-936X (ISSN-L)
- 1520-5851
- OpenAlex
- W2242231821
- Cited by
- 127
- References
- 275
- Citations by year
- 2026: 12 · 2025: 6 · 2024: 16 · 2023: 16 · 2022: 7 · 2021: 7 · 2020: 11 · 2019: 10 · 2018: 10 · 2017: 17 · 2016: 15
- FWCI
- 2.32
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Environmental Science & Technology (publishedVersion)
- PubMed (publishedVersion)
- Funders
- BITS Pilani Hyderabad
- Topics
- Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
- Physical Sciences › Energy › Fuel Technology › Chemical Looping and Thermochemical Processes
- Physical Sciences › Environmental Science › Environmental Engineering › Industrial Gas Emission Control
- Keywords
- CO2 capture, CO2 adsorption, porous adsorbents, metal-organic frameworks, carbon adsorbents, porous inorganic materials, flue gas, chemical looping combustion, oxygen uncoupling, adsorption mechanism, isosteric heat of adsorption, CO2 utilization, ammonia synthesis, urea synthesis, coal-fired power plants, pore size
- MeSH terms
- Adsorption, Carbon Dioxide, Oxygen, Urea, Porosity, Climate Change, Carbon Sequestration
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.