Development Trends in Porous Adsorbents for Carbon Capture
The DOI matches its Crossref record; 272 of the 275 references it cites were found in a registry or an index.
Abstract
Accumulation of greenhouse gases especially CO2 in the atmosphere leading to global warming with undesirable climate changes has been a serious global concern. Major power generation in the world is from coal based power plants. Carbon capture through pre- and post- combustion technologies with various technical options like adsorption, absorption, membrane separations, and chemical looping combustion with and without oxygen uncoupling have received considerable attention of researchers, environmentalists and the stake holders. Carbon capture from flue gases can be achieved with micro and meso porous adsorbents. This review covers carbonaceous (organic and metal organic frameworks) and noncarbonaceous (inorganic) porous adsorbents for CO2 adsorption at different process conditions and pore sizes. Focus is also given to noncarbonaceous micro and meso porous adsorbents in chemical looping combustion involving insitu CO2 capture at high temperature (>400 °C). Adsorption mechanisms, material characteristics, and synthesis methods are discussed. Attention is given to isosteric heats and characterization techniques. The options to enhance the techno-economic viability of carbon capture techniques by integrating with CO2 utilization to produce industrially important chemicals like ammonia and urea are analyzed. From the reader's perspective, for different classes of materials, each section has been summarized in the form of tables or figures to get a quick glance of the developments.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“unlike the microporous organic polymers, there are not any complexity or concern regarding the synthesis, cost and environmental aspects of synthesis of carbon-based adsorbents [11,18,20,33].”
From Biomass/Biochar carbon materials for CO2 capture and sequestration by cyclic adsorption processes: A review and prospects for future directions (2022) · cites this paper as [20]
Citations
Cites
Ordered mesoporous molecular sieves synthesized by a liquid-crystal template mechanism
Kresge, C. T., Leonowicz, M. E., Roth, W. J., Vartuli, J. C., & Beck, J. S. (1992) · Nature · doi:10.1038/359710a0 · Cited by 16,275
A new family of mesoporous molecular sieves prepared with liquid crystal templates
Beck, J. S., Vartuli, J. C., Roth, W. J., Leonowicz, M. E., Kresge, C. T., Schmitt, K. D., Chu, C. T. W., Olson, D. H., Sheppard, E. W., McCullen, S. B., et al. (1992) · Journal of the American Chemical Society · doi:10.1021/ja00053a020 · Cited by 10,967
Eddaoudi, M., Kim, J., Rosi, N., Vodak, D., Wachter, J., O'Keeffe, M., & Yaghi, O. M. (2002) · Science · doi:10.1126/science.1067208 · Cited by 8,132
A Chromium Terephthalate-Based Solid with Unusually Large Pore Volumes and Surface Area
Férey, G., Mellot-Draznieks, C., Serre, C., Millange, F., Dutour, J., Surblé, S., & Margiolaki, I. (2005) · Science · doi:10.1126/science.1116275 · Cited by 5,430
Carbon Dioxide Capture: Prospects for New Materials
D'Alessandro, D. M., Smit, B., & Long, J. R. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.201000431 · Cited by 4,046
Ultrahigh Porosity in Metal-Organic Frameworks
Furukawa, H., Ko, N., Go, Y. B., Aratani, N., Choi, S. B., Choi, E., Yazaydin, A. Ö., Snurr, R. Q., O’Keeffe, M., Kim, J., et al. (2010) · Science · doi:10.1126/science.1192160 · Cited by 3,904
Thermodynamics of mixed‐gas adsorption
Myers, A. L., & Prausnitz, J. M. (1965) · AIChE Journal · doi:10.1002/aic.690110125 · Cited by 3,775
An overview of current status of carbon dioxide capture and storage technologies
Leung, D. Y. C., Caramanna, G., & Maroto-Valer, M. M. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.07.093 · Cited by 3,198
Silica‐Based Mesoporous Organic–Inorganic Hybrid Materials
Hoffmann, F., Cornelius, M., Morell, J., & Fröba, M. (2006) · Angewandte Chemie International Edition · doi:10.1002/anie.200503075 · Cited by 3,089
Millward, A. R., & Yaghi, O. M. (2005) · Journal of the American Chemical Society · doi:10.1021/ja0570032 · Cited by 2,876
Research works printed but not linked: 24
- 10.1016/j.cherd.2012.02.011 · DOI
- 10.1016/S0196-8904(96)00242-7 · DOI · Paper page
- 2014, Design and Synthesis of Nitrogen-Doped Porous Carbon Materials for CO2 Capture and Investigation of CO2 Sorption Kinetics; 2.4.2
- Coombs D. S., 1997, Canadian Mineralogist, 35, 1571
- Collart, O.Nano design of an Aluminosilicate Framework into a mesoporous MCM-4A Architecture. Ph.D. Dissertation,Universiteti, Antwerpen, 2003.
- Kangwanwatana W., 2013, Chemical Engineering Transactions., 35, 1
- DRAFT: Technology and Applied R&D Needs for Carbon Capture- Beyond 2020, Resource Document for the Workshop on Basic Research needs for Carbon Capture: Beyond 2020, March, 2010, U.S. Department of Energy.
- 10.1016/j.apenergy.2012.11.034 · DOI · Paper page
- 10.1016/j.ijggc.2012.12.014 · DOI
- Buasri A., 2013, Sustainable Energy., 1, 7
- 10.1016/j.fuel.2009.11.019 · DOI · Paper page
- Songolzadeh M., 2012, Sci. World J., 6, 213
- Fauth D. J., 2003, Fuel Chemistry Division Preprints., 48, 169
- Kotyczka-Moranska M., 2012, Adv. Mater. Res., 48, 77
- Dangi G. P., 2012, Indian J. Chem., 51, 1238
- Ramírez-Moreno M. J., 2014, Alkaline and Alkaline-Earth Ceramic Oxides for CO2 Capture, Separation and Subsequent Catalytic Chemical Conversion, Intech
- 10.1039/C4EE01647E · DOI · Paper page
- Ouyang S., 2011, Sustain. Environ. Res., 21, 21
- 10.1016/j.apenergy.2014.02.012 · DOI
- Sciubidło A., 2012, Journal of Power Technologies., 92, 115
- Cho, P.Development and Characterisation of Oxygen-Carrier Materials for Chemical-Looping Combustion, Ph.D. Dissertation,Chalmers University of Technology, Göteborg, Sweden, 2005.
- Aydoğdu, B.Comparison of sorption capacities of hydrocarbons on different samples of MCM-41, Ph.D. Dissertation,Middle East Technical University,Turkey, 2013.
- Hanapimat, K. S. N. K.Synthesis and modification of micro and mesoporous materials as CO 2 adsorbents, Ph.D. Dissertation,Universiti Teknologi Malaysia,Malaysia, 2009.
- Kleitz, F.Ordered Mesoporous Materials: Template Removal, Frameworks and Morphology, Ph.D. Dissertation,Ruhr University Bochum,Germany, 2002.
Cited by
Emerging Multifunctional Metal–Organic Framework Materials
Li, B., Wen, H., Cui, Y., Zhou, W., Qian, G., & Chen, B. (2016) · Advanced Materials · doi:10.1002/adma.201601133 · Cited by 1,587
Porous Organic Polymers for Post‐Combustion Carbon Capture
Zou, L., Sun, Y., Che, S., Yang, X., Wang, X., Bosch, M., Wang, Q., Li, H., Smith, M., Yuan, S., et al. (2017) · Advanced Materials · doi:10.1002/adma.201700229 · Cited by 432
Selective capture of carbon dioxide from hydrocarbons using a metal-organic framework
Qazvini, O. T., Babarao, R., & Telfer, S. G. (2021) · Nature Communications · doi:10.1038/s41467-020-20489-2 · Cited by 350
Acidity and basicity of zeolites: A fundamental approach
Busca, G. (2017) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2017.04.007 · Cited by 290
Ding, N., Li, H., Feng, X., Wang, Q., Wang, S., Ma, L., Zhou, J., & Wang, B. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b06051 · Cited by 275
Modeling Amorphous Microporous Polymers for CO2Capture and Separations
Kupgan, G., Abbott, L. J., Hart, K. E., & Colina, C. M. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00691 · Cited by 272
Karimi, M., Shirzad, M., Silva, J. A. C., & Rodrigues, A. E. (2022) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2022.101890 · Cited by 237
Zhao, K., Jia, C., Li, Z., Du, X., Wang, Y., Li, J., Yao, Z., & Yao, J. (2023) · Fuel · doi:10.1016/j.fuel.2023.128913 · Cited by 218
Wang, K., Huang, H., Liu, D., Wang, C., Li, J., & Zhong, C. (2016) · Environmental Science & Technology · doi:10.1021/acs.est.6b00425 · Cited by 204
Yu, S., Bo, J., & Fengjuan, L. (2019) · Fuel · doi:10.1016/j.fuel.2018.07.087 · Cited by 165
Álvarez, J. R., Sánchez‐González, E., Pérez, E., Schneider-Revueltas, E., Martínez, A., Tejeda-Cruz, A., Islas‐Jácome, A., González‐Zamora, E., & Ibarra, I. A. (2017) · Dalton Transactions · doi:10.1039/c7dt01845b · Cited by 162
Sun, Z., Liao, Y., Zhao, S., Zhang, X., Liu, Q., & Shi, X. (2022) · Journal of Materials Chemistry A · doi:10.1039/d1ta07856a · Cited by 149
Mesoporous adsorbent for CO2 capture application under mild condition: A review
Azmi, A. A., & Aziz, M. A. A. (2019) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2019.103022 · Cited by 137
Developmental trends in CO 2 methanation using various catalysts
Sreedhar, I., Varun, Y., Singh, S. A., Venugopal, A., & Reddy, B. M. (2019) · Catalysis Science & Technology · doi:10.1039/c9cy01234f · Cited by 128
Self-citationSynthesis and Applications of Isoreticular Metal–Organic Frameworks IRMOFs-n (n = 1, 3, 6, 8)
Mai, Z., & Liu, D. (2019) · Crystal Growth & Design · doi:10.1021/acs.cgd.9b00879 · Cited by 123
Liu, W., Dai, X., Wang, Y., Song, L., Zhang, L., Zhang, D., Xie, J., Chen, L., Diwu, J., Wang, J., et al. (2018) · Environmental Science & Technology · doi:10.1021/acs.est.8b04728 · Cited by 119
Akinola, T. E., Prado, P. L. B., & Wang, M. (2022) · Applied Energy · doi:10.1016/j.apenergy.2022.119156 · Cited by 119
Das, A., Peu, S. D., Hossain, M. S., Nahid, M. M. A., Karim, F. R. B., Chowdhury, H., Porag, M. H., Argha, D. B. P., Saha, S., Islam, A. R. M. T., et al. (2023) · Heliyon · doi:10.1016/j.heliyon.2023.e22341 · Cited by 112
RetractedDevelopment of CaO-based adsorbents loaded on charcoal for CO2 capture at high temperature
Gao, N., Chen, K., & Quan, C. (2019) · Fuel · doi:10.1016/j.fuel.2019.116411 · Cited by 98
Kupgan, G., Demidov, A. G., & Colina, C. M. (2018) · Journal of Membrane Science · doi:10.1016/j.memsci.2018.08.004 · Cited by 94
Progress in adsorption capacity of nanomaterials for carbon dioxide capture: A comparative study
Firdaus, R. M., Desforges, A., Mohamed, A. R., & Vigolo, B. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.129553 · Cited by 95
“The scale-up production of nanomaterials for CO2 capture application is still largely in the future, their life cycle assessment is a topic of a growing attention (Lee, 2021; Pathakoti et al., 2018; Sreenivasulu et al., 2015; Wang et al., 2014).”
BackgroundStorage of CO2 into Porous Coordination Polymer Controlled by Molecular Rotor Dynamics
Inukai, M., Tamura, M., Horike, S., Higuchi, M., Kitagawa, S., & Nakamura, K. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201805111 · Cited by 88
Zhao, Y., Feng, Y., & Zhang, X. (2016) · Environmental Science & Technology · doi:10.1021/acs.est.6b01294 · Cited by 88
Melamine-supported porous organic polymers for efficient CO2 capture and Hg2+ removal
Wang, L., Guo, J., Xiang, X., Sang, Y., & Huang, J. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.124070 · Cited by 86
A fast methodology to rank adsorbents for CO2 capture with temperature swing adsorption
Gutierrez-Ortega, A., Nomen, R., Sempere, J., Parra, J. B., Montes-Morán, M. Á., & Gonzalez‐Olmos, R. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.134703 · Cited by 81
Hou, X., Liu, S., Zhu, Y., & Yang, Y. (2020) · Fuel · doi:10.1016/j.fuel.2020.117349 · Cited by 77
Li, P., Liu, W., Dennis, J. S., & Zeng, H. C. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b14960 · Cited by 72
Vooradi, R., Bertran, M., Frauzem, R., Anne, S. B., & Gani, R. (2017) · Chemical Engineering Research and Design · doi:10.1016/j.cherd.2017.12.019 · Cited by 77
Reusable nitrogen-doped mesoporous carbon adsorbent for carbon dioxide adsorption in fixed-bed
Yaumi, A. L., Bakar, M. Z. A., & Hameed, B. H. (2017) · Energy · doi:10.1016/j.energy.2017.07.130 · Cited by 66
Li, P., Chen, R., Lin, Y., & Li, W. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.126459 · Cited by 65
Sáenz-Cavazos, P. A., Hunter‐Sellars, E., Iacomi, P., McIntyre, S. R., Danaci, D., & Williams, D. R. (2023) · Frontiers in Energy Research · doi:10.3389/fenrg.2023.1167043 · Cited by 72
Advancing frontiers in CO2 capture: The renaissance of biomass-derived carbon materials
Umar, M., Yusuf, B. O., Aliyu, M., Hussain, I., Alhassan, A. M., Awad, M. M., Taialla, O. A., Ali, B., Alhooshani, K. R., & Ganiyu, S. A. (2024) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2024.216380 · Cited by 68
Singh, J., Bhunia, H., & Basu, S. (2017) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2017.11.018 · Cited by 66
Water-based synthesis of zeolitic imidazolate framework-8 for CO 2 capture
Shi, Z., Yu, Y., Fu, C., Wang, L., & Li, X. (2017) · RSC Advances · doi:10.1039/c7ra04875k · Cited by 64
Li, P., & Zeng, H. C. (2017) · Environmental Science & Technology · doi:10.1021/acs.est.7b03308 · Cited by 60
Ayeleru, O. O., Modekwe, H. U., Onisuru, O. R., Ohoro, C. R., Akinnawo, C. A., & Olubambi, P. A. (2023) · Sustainable Chemistry for Climate Action · doi:10.1016/j.scca.2023.100029 · Cited by 61
Soleimani, B., Shahrak, M. N., & Walton, K. S. (2024) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2024.105638 · Cited by 56
CO2 capture by coal ash-derived zeolites- roles of the intrinsic basicity and hydrophilic character
Beltrão-Nunes, A.-P., Sennour, R., Aruş, V. A., Anoma, S., Pires, M., Bouazizi, N., Roy, R., & Azzouz, A. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.11.133 · Cited by 56
Mosca, N., Vismara, R., Fernandes, J. A., Tuci, G., Nicola, C. D., Domasevitch, K. V., Giacobbe, C., Giambastiani, G., Pettinari, C., Aragones‐Anglada, M., et al. (2018) · Chemistry - A European Journal · doi:10.1002/chem.201802240 · Cited by 50
Stability and Carbon Capture Enhancement by Coal-Fly-Ash-Doped Sorbents at a High Temperature
Sreenivasulu, B., Sreedhar, I., Reddy, B. M., & Raghavan, K. V. (2016) · Energy & Fuels · doi:10.1021/acs.energyfuels.6b02721 · Cited by 49
Self-citationSurface oxidation modification of nitrogen doping biochar for enhancing CO2 adsorption
Guo, T., Zhang, Y., Geng, Y., Chen, J., Zhu, Z., Bedane, A. H., & Du, Y. (2023) · Industrial Crops and Products · doi:10.1016/j.indcrop.2023.117582 · Cited by 47
Thiyagarajan, S., Varuvel, E. G., Martin, L. J., & Nagalingam, B. (2017) · Clean Technologies and Environmental Policy · doi:10.1007/s10098-016-1326-5 · Cited by 45
“Postcombustion capture system using adsorption mechanism is effective in mitigating CO2 emission (Sreenivasulu et al. 2015).”
Yudong, H., Saipeng, H., Han, J., Xingbin, L., Lianfu, H., & Chang-feng, F. U. (2020) · Applied Sciences · doi:10.3390/app10041385 · Cited by 42
A thiophene-containing covalent triazine-based framework with ultramicropore for CO2 capture
Wang, K., Tang, Y., Jiang, Q., Lan, Y., Huang, H., Liu, D., & Zhong, C. (2017) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2017.07.007 · Cited by 42
Enhanced selective adsorption of CO 2 on nitrogen-doped porous carbon monoliths derived from IRMOF-3
Ding, S., Dong, Q., Hu, J., Xiao, W., Liu, X., Liao, L., & Zhang, N. (2016) · Chemical Communications · doi:10.1039/c6cc04416f · Cited by 42
Nabavi, S. A., Vladisavljević, G. T., Wicaksono, A., Georgiadou, S., & Manovic, V. M. (2016) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2016.05.033 · Cited by 40
“10, and can be calculated from [41] 253”
BackgroundAdsorption and separation of CO 2 from N 2 -rich gas on zeolites: Na-X faujasite vs Na-mordenite
Villarreal, A., Garbarino, G., Riani, P., Finocchio, E., Bosio, B., Ramírez, J., & Busca, G. (2017) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2017.03.021 · Cited by 45
Han, G., Rodriguez, K. M., Qian, Q., & Smith, Z. P. (2020) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.0c03456 · Cited by 40
Nabavi, S. A., Vladisavljević, G. T., Eguagie, E. M., Li, B., Georgiadou, S., & Manovic, V. M. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.07.054 · Cited by 37
“1 and calculated using the following equation [57]:”
MethodAzmi, A., Ruhaimi, A. H., & Aziz, M. A. A. (2020) · Materials Today Chemistry · doi:10.1016/j.mtchem.2020.100273 · Cited by 37
Porous sorbents for direct capture of carbon dioxide from ambient air
Zhang, Y., Ding, L., Xie, Z., Zhang, X., Sui, X., & Li, J. (2024) · Chinese Chemical Letters · doi:10.1016/j.cclet.2024.109676 · Cited by 36
Wang, Q., Ma, H., Chen, J., Du, Z., & Mi, J. (2017) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2017.05.034 · Cited by 35
Design of Graphene/Ionic Liquid Composites for Carbon Capture
Wang, S., Mahurin, S. M., Dai, S., & Jiang, D. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c01242 · Cited by 34
Understanding Hysteresis in Carbon Dioxide Sorption in Porous Metal–Organic Frameworks
Sapchenko, S. A., Barsukova, M. O., Belosludov, R. V., Kovalenko, K. A., Samsonenko⧫, D. G., Poryvaev, A. S., Sheveleva, A. M., Fedin, M. V., Bogomyakov, A. S., Dybtsev, D. N., et al. (2019) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.9b00016 · Cited by 33
Li, S., Cho, M. K., Yuan, X., Deng, S., Li, H., Zhao, L., Zhao, R., Wang, Y., Wang, J., & Lee, K. B. (2022) · Fuel · doi:10.1016/j.fuel.2022.125599 · Cited by 37
Bargougui, R., Bouazizi, N., Brun, N., Fotsing, P. N., Thoumire, O., Ladam, G. D., Woumfo, E. D., Mofaddel, N., Derf, F. L., & Vieillard, J. (2017) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2017.11.079 · Cited by 30
Saeed, U., Khan, A. L., Gilani, M. A., Bilad, M. R., & Khan, A. U. (2021) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2021.117509 · Cited by 32
Solid adsorbents for carbon dioxide capture: a review
Rashid, H., & Rafey, A. (2023) · Chemistry and Ecology · doi:10.1080/02757540.2023.2227622 · Cited by 35
Wang, Y., Gan, Y., & Huang, J. (2020) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.9b06621 · Cited by 29
Rojek, T., Gubler, L., Nasef, M. M., & Abouzari‐Lotf, E. (2017) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.7b00862 · Cited by 29
Ca-Based Layered Double Hydroxides for Environmentally Sustainable Carbon Capture
Zheng, S., Song, C., Curria, M. C., Ren, Z. J., & White, C. E. (2023) · Environmental Science & Technology · doi:10.1021/acs.est.3c03742 · Cited by 25
High-throughput screening of hypothetical aluminosilicate zeolites for CO2 capture from flue gas
Shi, C., Li, L., & Li, Y. (2020) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2020.101346 · Cited by 29
Effects of N and S Functionalities on Binary Gas Co-adsorption on a Coal Macromolecule
Fan, C., Li, S., Luo, M., Zhou, L., Zhang, H., & Yang, Z. (2019) · Energy & Fuels · doi:10.1021/acs.energyfuels.8b04410 · Cited by 25
Feng, W., Liu, K., Liu, J., Jin, J., Mi, J., Xu, S., & Meng, H. (2024) · Separation and Purification Technology · doi:10.1016/j.seppur.2024.127102 · Cited by 24
Li, P., Lin, Y., Chen, R., & Li, W. (2020) · Dalton Transactions · doi:10.1039/d0dt00722f · Cited by 22
Wahed, S. A., Hassan, A., Alam, A., Bera, R., & Das, N. (2025) · ACS Applied Polymer Materials · doi:10.1021/acsapm.5c00436 · Cited by 21
CO2-Selective Capture from Light Hydrocarbon Mixtures by Metal-Organic Frameworks: A Review
Huang, H., Wang, L., Zhang, X., Zhao, H., & Gu, Y. (2022) · Clean Technologies · doi:10.3390/cleantechnol5010001 · Cited by 20
Hou, X., Liu, S., Li, G., Zhu, Y., & Liu, A. (2021) · Rock Mechanics and Rock Engineering · doi:10.1007/s00603-021-02511-1 · Cited by 21
“Moreover, ECBM recovery via injecting CO2 into coal seams has showed it early promise to enhance CBM recovery and simultaneously sequester CO2 through CO2–methane displacement (White et al. 2005; Sreenivasulu et al. 2015; Zhang and Liu 2017; Mukherjee and Misra 2018; Hou et al. 2020b).”
BackgroundSandwich-type ordered mesoporous carbon/graphene nanocomposites derived from ionic liquid
Kim, H. S., Kim, Y. H., Roh, K. C., & Kim, K. (2016) · Nano Research · doi:10.1007/s12274-016-1158-y · Cited by 21
“Mesoporous carbons have been extensively investigated for potential applications as catalysts, absorbents, and energy storage devices [1, 5, 6].”
BackgroundStorage of CO2 into Porous Coordination Polymer Controlled by Molecular Rotor Dynamics
Inukai, M., Tamura, M., Horike, S., Higuchi, M., Kitagawa, S., & Nakamura, K. (2018) · Angewandte Chemie · doi:10.1002/ange.201805111 · Cited by 20
Ward, A., & Pini, R. (2024) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.4c01345 · Cited by 18
Su, G. M., Cordova, I. A., Brady, M. A., Prendergast, D., & Wang, C. (2016) · Polymer · doi:10.1016/j.polymer.2016.06.068 · Cited by 19
Thermokinetic Investigations of High Temperature Carbon Capture Using a Coal Fly Ash Doped Sorbent
Sreenivasulu, B., Sreedhar, I., Venugopal, A., Reddy, B. M., & Raghavan, K. V. (2017) · Energy & Fuels · doi:10.1021/acs.energyfuels.7b00629 · Cited by 19
Self-citationSun, J., Yan, W., Liu, X., Tao, H., Xiong, Y., Tian, S., Feng, J., Huang, Z., & Zhao, Z. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.151583 · Cited by 18
Li, Q., Luo, Y., Ding, Y., Wang, Y., Wang, Y., Du, H., Yuan, R., Bao, J., Fang, M., & Wu, Y. J. (2019) · Dalton Transactions · doi:10.1039/c9dt00478e · Cited by 17
MAS NMR investigations on a metakaolinite-rich brick after zeolitization by alkaline treatments
Poumayé, N., Allahdin, O., Tricot, G., Revel, B., Billon, G., Récourt, P., Wartel, M., & Boughriet, A. (2018) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2018.10.007 · Cited by 17
Cao, S., Li, L., Guo, M., Xu, W., Liu, T., Xing, T., Li, Z., Wang, M., Wang, M., & Wu, M. (2023) · Chemistry of Materials · doi:10.1021/acs.chemmater.3c02176 · Cited by 15
Carbon capture using amine modified porous carbons derived from starch (Starbons®)
Sreedhar, I., Aniruddha, R., & Malik, S. (2019) · SN Applied Sciences · doi:10.1007/s42452-019-0482-8 · Cited by 14
Self-citationInfrared spectroscopic monitoring of solid-state processes
Biliškov, N. (2022) · Physical Chemistry Chemical Physics · doi:10.1039/d2cp01458k · Cited by 12
Mesfer, M. K. A., Parthasarthy, V., Danish, M., Shah, M., Ansari, K. B., Ammendola, P., Khan, M. I., & Raganati, F. (2024) · Separation Science and Technology · doi:10.1080/01496395.2024.2377585 · Cited by 10
Teng, D., Jin, P., Yang, S., Guo, W., Zhao, Z., Zhou, G., Li, P., & Cao, Y. (2023) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.3c00681 · Cited by 10
CaO-based high temperature CO2 sorbents – Literature review
Konopacka-Łyskawa, D., Czaplicka, N., & Szefer, A. (2023) · Chemical and Process Engineering New Frontiers · doi:10.24425/cpe.2021.138938 · Cited by 10
“The use of high-temperature adsorbents, including CaO, has a high potential to capture CO 2 from various systems (Sreenivasulu et al., 2015), both in pre-combustion and post-combustion capture (Perejón et al., 2016).”
BackgroundLarge CO 2 uptake on a monolayer of CaO
Berdiyorov, G. R., Neek-Amal, M., Hussein, I. A., Madjet, M. E., & Peeters, F. M. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta08810d · Cited by 10
A bird’s eye view of recent advances in direct air capture of CO2 using MOFs
Velagala, S. K. R., Sabri, Y. M., Parthasarathy, R., & Sreedhar, I. (2025) · Fuel · doi:10.1016/j.fuel.2025.136525 · Cited by 11
Self-citationIn situ growth of Ni/N co-doped carbon nanotubes in biochar to improve CO2 capture capacity
Bao, S., Zheng, X., Xu, Z., Yang, Z., Sun, W., Mei, J., Rong, J., & Li, Z. (2025) · Separation and Purification Technology · doi:10.1016/j.seppur.2025.135030 · Cited by 9
Jiaqiang, W., Guohui, Y., Ling, W., Binghua, Z., Wang, Z., Zhenghong, H., Gang, L., & Mingxi, W. (2026) · Green Chemical Technology · doi:10.70322/gct.2026.10003 · Cited by 9
Yusuf, B. O., Abdulrasheed, A. A., Hambali, H. U., Gbadamosi, A. O., Yusuff, A. S., Afolabi, F. A., Aliyu, M., & Ganiyu, S. A. (2026) · Carbon Capture Science & Technology · doi:10.1016/j.ccst.2026.100589 · Cited by 33
Su, G. M., Cordova, I. A., Brady, M. A., Prendergast, D., & Wang, C. (2016) · Polymer · doi:10.1016/j.polymer.2016.09.082 · Cited by 8
Johnson, K. E., Melchert, D. S., Armstrong, E. N., Gianola, D. S., Cobb, C. L., & Begley, M. R. (2023) · Materials & Design · doi:10.1016/j.matdes.2023.112165 · Cited by 7
Raufaste, C., Bouret, Y., & Celestini, F. (2016) · Europhysics Letters (EPL) · doi:10.1209/0295-5075/114/46005 · Cited by 7
Nickel MOF enabled cadmium adsorption: A response surface optimization study
Kumar, A., Prabhakaran, J., Cheshta, Jangra, P. K., Pali, H. S., & Shah, M. A. (2026) · Journal of the Indian Chemical Society · doi:10.1016/j.jics.2026.102442 · Cited by 6
Recent advances in polymeric materials for direct carbon dioxide capture from ambient air
Cai, J., Song, B., Qin, A., & Tang, B. Z. (2026) · Journal of Materials Chemistry A · doi:10.1039/d5ta08358c · Cited by 7
Klinkenberg, N., Klaiber, A., Müller, M., & Polarz, S. (2019) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2019.109879 · Cited by 6
Yang, J., Zhang, C., Chen, J.-Y., Wei, J., & Wang, X. (2021) · Journal of Molecular Structure · doi:10.1016/j.molstruc.2021.131797 · Cited by 6
Biochar in Carbon Sequestration
Shirzad, M., Karimi, M., Rodrigues, A. E., & Silva, J. A. C. (2023) · Materials horizons · doi:10.1007/978-981-99-5239-7_4 · Cited by 9
Rebello, C. M., Costa, É. A., Sánchez, A. S., Vides, F., & Nogueira, I. B. R. (2024) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.25512 · Cited by 8
Zhang, X., & Lu, A. (2019) · Wiley eBooks · doi:10.1002/9781119091219.ch3 · Cited by 6
Stiernet, P., Verdin, A., Johnsson, N., Jaworski, A., Prietzel, D., Hedin, N., & Yuan, J. (2025) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5c10971 · Cited by 7
Microstructure evolution of alite in-situ carbonated by aminated mesoporous silica nanoparticles
Zhao, Y., Sun, Z., Qiao, G., Xu, F., & Chen, B. (2024) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2024.139052 · Cited by 5
Xiong, S., Huang, H., Tang, T., Cao, X., Zhao, H., Li, G., Liu, H., Zhang, W., & Liu, Q. (2023) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2023.10.309 · Cited by 5
Metadata
- Authors
- Sreenivasulu, B., Sreedhar, I., Suresh, P., & Raghavan, K. V.
- Affiliations
- Birla Institute of Technology and Science - Hyderabad Campus (IN)
- Granules India Ltd, Gagillapur, Hyderabad, India
- Indian Institute of Chemical Technology (IN)
- Corresponding author
- Sreedhar, Inkollu
- Venue
- Environmental Science & Technology
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-10-14
- Volume
- 49
- Issue
- 21
- Pages
- 12641-12661
- ISSN
- 0013-936X (ISSN-L)
- 1520-5851
- OpenAlex
- W2242231821
- Cited by
- 127
- References
- 275
- Citations by year
- 2026: 12 · 2025: 6 · 2024: 16 · 2023: 16 · 2022: 7 · 2021: 7 · 2020: 11 · 2019: 10 · 2018: 10 · 2017: 17 · 2016: 15
- FWCI
- 2.32
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Environmental Science & Technology (publishedVersion)
- PubMed (publishedVersion)
- Funders
- BITS Pilani Hyderabad
- Topics
- Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
- Physical Sciences › Energy › Fuel Technology › Chemical Looping and Thermochemical Processes
- Physical Sciences › Environmental Science › Environmental Engineering › Industrial Gas Emission Control
- Keywords
- CO2 capture, CO2 adsorption, porous adsorbents, metal-organic frameworks, carbon adsorbents, porous inorganic materials, flue gas, chemical looping combustion, oxygen uncoupling, adsorption mechanism, isosteric heat of adsorption, CO2 utilization, ammonia synthesis, urea synthesis, coal-fired power plants, pore size
- MeSH terms
- Adsorption, Carbon Dioxide, Oxygen, Urea, Porosity, Climate Change, Carbon Sequestration
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.