The DOI matches its Crossref record; 56 of the 56 references it cites were found in a registry or an index.
Three-Dimensional Growth of Li2S in Lithium–Sulfur Batteries Promoted by a Redox Mediator
Open accessAbstract
During the discharge of a lithium-sulfur (Li-S) battery, an electronically insulating 2D layer of Li2S is electrodeposited onto the current collector. Once the current collector is enveloped, the overpotential of the cell increases, and its discharge is arrested, often before reaching the full capacity of the active material. Guided by a new computational platform known as the Electrolyte Genome, we advance and apply benzo[ghi]peryleneimide (BPI) as a redox mediator for the reduction of dissolved polysulfides to Li2S. With BPI present, we show that it is now possible to electrodeposit Li2S as porous, 3D deposits onto carbon current collectors during cell discharge. As a result, sulfur utilization improved 220% due to a 6-fold increase in Li2S formation. To understand the growth mechanism, electrodeposition of Li2S was carried out under both galvanostatic and potentiostatic control. The observed kinetics under potentiostatic control were modeled using modified Avrami phase transformation kinetics, which showed that BPI slows the impingement of insulating Li2S islands on carbon. Conceptually, the pairing of conductive carbons with BPI can be viewed as a vascular approach to the design of current collectors for energy storage devices: here, conductive carbon "arteries" dominate long-range electron transport, while BPI "capillaries" mediate short-range transport and electron transfer between the storage materials and the carbon electrode.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Generalized Gradient Approximation Made Simple
Perdew, J. P., Burke, K., & Ernzerhof, M. (1996) · Physical Review Letters · doi:10.1103/physrevlett.77.3865 · Cited by 215,824
Electrical energy storage for the grid: A battery of choices
Dunn, B., Kamath, H., & Tarascon, J.-M. (2011) · Science · doi:10.1126/science.1212741 · Cited by 15,072
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Rechargeable Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., Chung, S.-H., Zu, C., & Su, Y.-S. (2014) · Chemical Reviews · doi:10.1021/cr500062v · Cited by 4,665
Lithium–Sulfur Batteries: Electrochemistry, Materials, and Prospects
Yin, Y., Xin, S., Guo, Y., & Wan, L. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201304762 · Cited by 2,707
Lithium−Air Battery: Promise and Challenges
Girishkumar, G., McCloskey, B., Luntz, A. C., Swanson, S., & Wilcke, W. (2010) · The Journal of Physical Chemistry Letters · doi:10.1021/jz1005384 · Cited by 2,528
De Greef, T. F. A., Smulders, M. M. J., Wolffs, M., Schenning, A. P. H. J., Sijbesma, R. P., & Meijer, E. W. (2009) · Chemical Reviews · doi:10.1021/cr900181u · Cited by 2,459
Challenges and Prospects of Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., & Su, Y.-S. (2013) · Accounts of Chemical Research · doi:10.1021/ar300179v · Cited by 2,380
A Polymer Electrolyte‐Based Rechargeable Lithium/Oxygen Battery
Abraham, K. M., & Jiang, Z. (1996) · Journal of The Electrochemical Society · doi:10.1149/1.1836378 · Cited by 2,092
Nanostructured sulfur cathodes
Yang, Y., Zheng, G., & Cui, Y. (2013) · Chemical Society Reviews · doi:10.1039/c2cs35256g · Cited by 1,947
Cited by
Advances in lithium–sulfur batteries based on multifunctional cathodes and electrolytes
Pang, Q., Liang, X., Kwok, C. Y., & Nazar, L. F. (2016) · Nature Energy · doi:10.1038/nenergy.2016.132 · Cited by 2,167
The rise of organic electrode materials for energy storage
Schon, T. B., McAllister, B. T., Li, P.-F., & Seferos, D. S. (2016) · Chemical Society Reviews · doi:10.1039/c6cs00173d · Cited by 1,095
A Perspective toward Practical Lithium–Sulfur Batteries
Zhao, M., Li, B.-Q., Zhang, X.-Q., Huang, J.-Q., & Zhang, Q. (2020) · ACS Central Science · doi:10.1021/acscentsci.0c00449 · Cited by 858
Lithium–Sulfur Batteries under Lean Electrolyte Conditions: Challenges and Opportunities
Zhao, M., Li, B., Peng, H., Yuan, H., Wei, J., & Huang, J. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201909339 · Cited by 663
Enhanced Electrochemical Kinetics on Conductive Polar Mediators for Lithium–Sulfur Batteries
Peng, H., Zhang, G., Chen, X., Zhang, Z., Xu, W., Huang, J., & Zhang, Q. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201605676 · Cited by 649
Lim, W., Kim, S., Jo, C., & Lee, J. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201902413 · Cited by 535
Electrolyte solutions design for lithium-sulfur batteries
Liu, Y., Elias, Y., Meng, J., Aurbach, D., Zou, R., Xia, D., & Pang, Q. (2021) · Joule · doi:10.1016/j.joule.2021.06.009 · Cited by 534
Designing Advanced Lithium‐Based Batteries for Low‐Temperature Conditions
Gupta, A., & Manthiram, A. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202001972 · Cited by 462
Carbon nanomaterials for advanced lithium sulfur batteries
Xu, Z.-L., Kim, J.-K., & Kang, K. (2018) · Nano Today · doi:10.1016/j.nantod.2018.02.006 · Cited by 454
Solvent‐Mediated Li2S Electrodeposition: A Critical Manipulator in Lithium–Sulfur Batteries
Li, Z., Zhou, Y., Wang, Y., & Lu, Y. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201802207 · Cited by 429
Xu, Z.-L., Lin, S., Onofrio, N., Zhou, L., Shi, F., Lu, W., Kang, K., Zhang, Q., & Lau, S. P. (2018) · Nature Communications · doi:10.1038/s41467-018-06629-9 · Cited by 391
Zhang, Z., Peng, H., Zhao, M., & Huang, J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707536 · Cited by 357
Chu, H., Noh, H., Kim, Y.-J., Yuk, S., Lee, J.-H., Lee, J., Kwack, H., Kim, Y., Yang, D.-K., & Kim, H.-T. (2019) · Nature Communications · doi:10.1038/s41467-018-07975-4 · Cited by 353
Park, J., Yu, B., Park, J. S., Choi, J. W., Kim, C., Sung, Y., & Goodenough, J. B. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602567 · Cited by 348
A Bifunctional Perovskite Promoter for Polysulfide Regulation toward Stable Lithium–Sulfur Batteries
Kong, L., Chen, X., Li, B., Peng, H., Huang, J., Xie, J., & Zhang, Q. (2018) · Advanced Materials · doi:10.1002/adma.201705219 · Cited by 332
A Comprehensive Approach toward Stable Lithium–Sulfur Batteries with High Volumetric Energy Density
Pang, Q., Liang, X., Kwok, C. Y., Kulisch, J., & Nazar, L. F. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601630 · Cited by 321
Semi-Immobilized Molecular Electrocatalysts for High-Performance Lithium–Sulfur Batteries
Zhao, C.-X., Li, X.-Y., Zhao, M., Chen, Z.-X., Song, Y.-W., Chen, W.-J., Liu, J.-N., Wang, B., Zhang, X.-Q., Chen, C.-M., et al. (2021) · Journal of the American Chemical Society · doi:10.1021/jacs.1c09107 · Cited by 307
Toward Practical High‐Energy‐Density Lithium–Sulfur Pouch Cells: A Review
Chen, Z., Zhao, M., Hou, L., Zhang, X., Li, B., & Huang, J. (2022) · Advanced Materials · doi:10.1002/adma.202201555 · Cited by 282
Redox Comediation with Organopolysulfides in Working Lithium-Sulfur Batteries
Zhao, M., Li, B.-Q., Chen, X., Xie, J., Yuan, H., & Huang, J.-Q. (2020) · Chem · doi:10.1016/j.chempr.2020.09.015 · Cited by 280
Organocatalyzed Birch Reduction Driven by Visible Light
Cole, J. P., Chen, D.-F., Kudisch, M., Pearson, R. M., Lim, C.-H., & Miyake, G. M. (2020) · Journal of the American Chemical Society · doi:10.1021/jacs.0c05899 · Cited by 277
A Toolbox for Lithium–Sulfur Battery Research: Methods and Protocols
Zhang, G., Zhang, Z., Peng, H., Huang, J., & Zhang, Q. (2017) · Small Methods · doi:10.1002/smtd.201700134 · Cited by 260
Metadata
- Authors
- Gerber, L. C. H., Frischmann, P. D., Fan, F. Y., Doris, S. E., Qu, X., Scheuermann, A. M., Persson, K., Chiang, Y.-M., & Helms, B. A.
- Venue
- Nano Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-12-31
- Volume
- 16
- Issue
- 1
- Pages
- 549-554
- ISSN
- 1530-6984 (ISSN-L)
- 1530-6992
- OpenAlex
- W2221390407
- Cited by
- 255
- References
- 56
- FWCI
- 7.86
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.