Improved Bone Regeneration in Rabbit Bone Defects Using 3D Printed Composite Scaffolds Functionalized with Osteoinductive Factors
Open accessThe DOI matches its Crossref record; 61 of the 62 references it cites were found in a registry or an index.
Abstract
The scaffolds were functionalized with osteoactive factors: bone morphogenetic protein and zoledronic acid. It was observed that the bioactive molecule-functionalized 3D printed porous composite scaffolds provide an excellent conductive surface inducing higher bone formation and improved defect healing in both critical size long bones and cranial defects.
Overview
CoChat Summary
TL;DR
The paper reports 3D printed poly(trimethylene carbonate)-based composite scaffolds, filled with a macroporous cryogel and functionalized with bone morphogenetic protein and zoledronic acid, as synthetic bone grafts. In two rabbit defect models, these functionalized scaffolds showed higher bone formation and improved defect healing than the baseline described in the paper.
Key findings
- The authors produced photocuring composite resins with poly(trimethylene carbonate) containing high ratios of bioactive ceramics and printed porous 3D composite scaffolds for bone grafting.
- The scaffolds were further filled with a macroporous cryogel to increase surface area for cell infiltration and functionalized with osteoactive factors: bone morphogenetic protein and zoledronic acid.
- In vitro, the scaffolds were evaluated for biocompatibility; in vivo they were tested in critical bone defects of approximately 8 mm in two rabbit models: a smaller rabbit tibia study and a larger rabbit cranium study.
- The paper states that the bioactive molecule-functionalized 3D printed porous composite scaffolds induced higher bone formation and improved defect healing in both critical-size long-bone and cranial defects.
Methods
- Design: Experimental biomaterials study with in vitro biocompatibility testing and in vivo rabbit implantation in two clinically relevant critical-defect models.
- Data/sample: Rabbit tibia model and rabbit cranium model, each with critical bone defects of about 8 mm.
- Main analysis: Comparison of bone regeneration and defect healing after implantation of 3D printed porous composite scaffolds, including scaffolds functionalized with bone morphogenetic protein and zoledronic acid.
Limitations
- The paper does not state the sample size, group allocation, follow-up duration, or quantitative effect sizes in the provided text.
- The provided text does not report detailed statistical results or specific numerical outcomes beyond the approximate defect size (~8 mm); this is evident from the text.
- Only rabbit models are described, so generalization to other species or human clinical outcomes is not established in the provided text.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
0 Valid · 0 Not valid · 0 Not checked · 4 Own results and interpretations
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“It was observed that the bioactive molecule-functionalized 3D printed porous composite scaffolds provide an excellent conductive surface inducing higher bone formation and improved defect healing in both critical size long bones and cranial defects.”
- Also stated in: § Title · plain
“Improved Bone Regeneration in Rabbit Bone Defects Using 3D Printed Composite Scaffolds Functionalized with Osteoinductive Factors”
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Also stated in: § Title · plain
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“It was observed that the bioactive molecule-functionalized 3D printed porous composite scaffolds provide an excellent conductive surface inducing higher bone formation and improved defect healing in both critical size long bones and cranial defects.”
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A conclusion the paper draws from its own results — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Our findings provide strong evidence in favor of these composites as next generation synthetic bone substitutes.”
boostedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A conclusion the paper draws from its own results — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“It was observed that the bioactive molecule-functionalized 3D printed porous composite scaffolds provide an excellent conductive surface inducing higher bone formation and improved defect healing in both critical size long bones and cranial defects.”
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
Citations
Cites
Matrix elasticity directs stem cell lineage specification
Engler, A. J., Sen, S., Sweeney, H. L., & Discher, D. E. (2006) · Cell · doi:10.1016/j.cell.2006.06.044 · Cited by 13,915
Fracture healing: mechanisms and interventions
Einhorn, T. A., & Gerstenfeld, L. C. (2015) · Nature Reviews Rheumatology · doi:10.1038/nrrheum.2014.164 · Cited by 1,807
Tsuji, K., Bandyopadhyay, A., Harfe, B. D., Cox, K., Kakar, S., Gerstenfeld, L., Einhorn, T., Tabin, C. J., & Rosen, V. (2006) · Nature Genetics · doi:10.1038/ng1916 · Cited by 822
Samavedi, S., Whittington, A. R., & Goldstein, A. S. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.06.014 · Cited by 802
Poly(lactide-co-glycolide)/hydroxyapatite composite scaffolds for bone tissue engineering
Kim, S.-S., Sun Park, M., Jeon, O., Yong Choi, C., & Kim, B.-S. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.08.016 · Cited by 766
Regenerating bone with bioactive glass scaffolds: A review of in vivo studies in bone defect models
El-Rashidy, A. A., Roether, J. A., Harhaus, L., Kneser, U., & Boccaccini, A. R. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.08.030 · Cited by 660
Biodegradation behavior of various calcium phosphate materials in bone tissue
Klein, C. P. A. T., Driessen, A. A., de Groot, K., & van den Hooff, A. (1983) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820170505 · Cited by 584
Does adult fracture repair recapitulate embryonic skeletal formation?
Ferguson, C., Alpern, E., Miclau, T., & Helms, J. A. (1999) · Mechanisms of Development · doi:10.1016/s0925-4773(99)00142-2 · Cited by 542
Mathematically defined tissue engineering scaffold architectures prepared by stereolithography
Melchels, F. P. W., Bertoldi, K., Gabbrielli, R., Velders, A. H., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.05.068 · Cited by 530
The roles of signaling pathways in bone repair and regeneration
Majidinia, M., Sadeghpour, A., & Yousefi, B. (2018) · Journal of Cellular Physiology · doi:10.1002/jcp.26042 · Cited by 513
Size Matters: Defining Critical in Bone Defect Size!
Schemitsch, E. H. (2017) · Journal of Orthopaedic Trauma · doi:10.1097/bot.0000000000000978 · Cited by 501
Bone fracture healing in mechanobiological modeling: A review of principles and methods
Ghiasi, M. S., Chen, J., Vaziri, A., Rodriguez, E. K., & Nazarian, A. (2017) · Bone Reports · doi:10.1016/j.bonr.2017.03.002 · Cited by 485
Cryogels on the basis of natural and synthetic polymers: preparation, properties and application
Lozinsky, V. I. (2002) · Russian Chemical Reviews · doi:10.1070/rc2002v071n06abeh000720 · Cited by 476
Ducheyne, P., Radin, S., & King, L. (1993) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820270105 · Cited by 467
Bioceramics: From Bone Regeneration to Cancer Nanomedicine
Vallet‐Regí, M., & Ruiz‐Hernández, E. (2011) · Advanced Materials · doi:10.1002/adma.201101586 · Cited by 463
The in vivo and in vitro degradation behavior of poly(trimethylene carbonate)
Zhang, Z., Kuijer, R., Bulstra, S. K., Grijpma, D. W., & Feijen, J. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.09.017 · Cited by 442
Bone defect animal models for testing efficacy of bone substitute biomaterials
Li, Y., Chen, S.-K., Li, L., Qin, L., Wang, X.-L., & Lai, Y.-X. (2015) · Journal of Orthopaedic Translation · doi:10.1016/j.jot.2015.05.002 · Cited by 430
Critical-Size Bone Defects: Is There a Consensus for Diagnosis and Treatment?
Nauth, A., Schemitsch, E., Norris, B., Nollin, Z., & Watson, J. T. (2018) · Journal of Orthopaedic Trauma · doi:10.1097/bot.0000000000001115 · Cited by 419
Materials used in cranioplasty: a history and analysis
Shah, A. M., Jung, H., & Skirboll, S. (2014) · Neurosurgical Focus · doi:10.3171/2014.2.focus13561 · Cited by 389
Vortkamp, A., Pathi, S., Peretti, G. M., Caruso, E. M., Zaleske, D. J., & Tabin, C. J. (1998) · Mechanisms of Development · doi:10.1016/s0925-4773(97)00203-7 · Cited by 354
Poly(trimethylene carbonate)-based polymers engineered for biodegradable functional biomaterials
Fukushima, K. (2016) · Biomaterials Science · doi:10.1039/c5bm00123d · Cited by 335
Guillaume, O., Geven, M. A., Sprecher, C. M., Stadelmann, V. A., Grijpma, D. W., Tang, T. T., Qin, L., Lai, Y., Alini, M., de Bruijn, J. D., et al. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.03.006 · Cited by 197
Enhanced mechanical properties of 1,3-trimethylene carbonate polymers and networks
Pêgo, A. P., Grijpma, D. W., & Feijen, J. (2003) · Polymer · doi:10.1016/s0032-3861(03)00668-2 · Cited by 193
Wnt pathway, an essential role in bone regeneration
Chen, Y., & Alman, B. A. (2009) · Journal of Cellular Biochemistry · doi:10.1002/jcb.22020 · Cited by 188
Osteoinductive hydroxyapatite-coated titanium implants
Ripamonti, U., Roden, L. C., & Renton, L. F. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.01.050 · Cited by 177
Cranioplasty complications and risk factors associated with bone flap resorption
Brommeland, T., Rydning, P. N. F., Pripp, A. H., et al. (2015) · Scandinavian Journal of Trauma Resuscitation and Emergency Medicine · doi:10.1186/s13049-015-0155-6 · Cited by 150
Lozinsky, V. I. (2008) · Russian Chemical Bulletin · doi:10.1007/s11172-008-0131-7 · Cited by 145
Schmidleithner, C., Malferrari, S., Palgrave, R. G., Bomze, D., Schwentenwein, M., & Kalaskar, D. M. (2019) · Biomedical Materials · doi:10.1088/1748-605x/ab279d · Cited by 140
Teotia, A. K., Raina, D. B., Singh, C., et al. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b14782 · Cited by 137
Self-citationThe Recent Revolution in the Design and Manufacture of Cranial Implants
Bonda, D., Manjila, S. V., Selman, W. R., & Dean, D. (2015) · Neurosurgery · doi:10.1227/neu.0000000000000899 · Cited by 125
Photo-crosslinked synthetic biodegradable polymer networks for biomedical applications
van Bochove, B., & Grijpma, D. W. (2018) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2018.1553105 · Cited by 124
Self-citationExtrusion-based 3D printing of poly(propylene fumarate) scaffolds with hydroxyapatite gradients
Trachtenberg, J. E., Placone, J. K., Smith, B. T., Fisher, J. P., & Mikos, A. G. (2017) · Journal of Biomaterials Science, Polymer Edition · doi:10.1080/09205063.2017.1286184 · Cited by 116
DETECTION OF TITANIUM IN HUMAN TISSUES AFTER CRANIOFACIAL SURGERY
Matthew, I., & Frame, J. W. (1998) · Plastic & Reconstructive Surgery · doi:10.1097/00006534-199804040-00049 · Cited by 107
Detection of Titanium in Human Tissues after Craniofacial Surgery
Jorgenson, D. S., Mayer, M. H., Ellenbogen, R. G., et al. (1997) · Plastic & Reconstructive Surgery · doi:10.1097/00006534-199704000-00006 · Cited by 100
Bat, E., Kothman, B. H. M., Higuera, G. A., van Blitterswijk, C. A., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.07.102 · Cited by 96
Bartee, B. K., & Ja, C. (1995) · PubMed · Cited by 96
New Approaches in the Treatment of Critical‐Size Segmental Defects in Long Bones
Gugala, Z., Lindsey, R. W., & Gogolewski, S. (2007) · Macromolecular Symposia · doi:10.1002/masy.200750722 · Cited by 95
Preparation of Flexible and Elastic Poly(trimethylene carbonate) Structures by Stereolithography
Schüller-Ravoo, S., Feijén, J., & Grijpma, D. W. (2011) · Macromolecular Bioscience · doi:10.1002/mabi.201100203 · Cited by 76
van Bochove, B., Hannink, G., Buma, P., & Grijpma, D. W. (2016) · Macromolecular Bioscience · doi:10.1002/mabi.201600290 · Cited by 73
Self-citationRaina, D. B., Isaksson, H., Teotia, A. K., Lidgren, L., Tägil, M., & Kumar, A. (2016) · Journal of Controlled Release · doi:10.1016/j.jconrel.2016.05.061 · Cited by 71
Self-citationOrbital floor repair using patient specific osteoinductive implant made by stereolithography
Guillaume, O., Geven, M. A., Varjas, V., Varga, P., Gehweiler, D., Stadelmann, V. A., Smidt, T., Zeiter, S., Sprecher, C. M., Bos, R. R. M., et al. (2019) · Biomaterials · doi:10.1016/j.biomaterials.2019.119721 · Cited by 68
Schüller-Ravoo, S., Feijen, J., & Grijpma, D. W. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.06.004 · Cited by 67
Temperature elevation during simulated polymethylmethacrylate (PMMA) cranioplasty in a cadaver model
Golz, T., Graham, C. R., Busch, L. C., et al. (2010) · Journal of Clinical Neuroscience · doi:10.1016/j.jocn.2009.09.005 · Cited by 60
Design of Porous Three-Dimensional PDLLA/nano-hap Composite Scaffolds Using Stereolithography
Ronca, A., Ambrosio, L., & Grijpma, D. W. (2012) · Journal of Applied Biomaterials & Functional Materials · doi:10.5301/jabfm.2012.10211 · Cited by 59
Guillaume, O., Geven, M. A., Grijpma, D. W., Tang, T., Qin, L., Lai, Y., Yuan, H., Richards, R. G., & Eglin, D. (2016) · Polymers for Advanced Technologies · doi:10.1002/pat.3892 · Cited by 56
Kumar, A. (2016) · CRC Press eBooks · doi:10.1201/b19676 · Cited by 54
Self-citationDienel, K., van Bochove, B., & Seppälä, J. V. (2019) · Biomacromolecules · doi:10.1021/acs.biomac.9b01272 · Cited by 54
Self-citationFabrication of patient specific composite orbital floor implants by stereolithography
Geven, M. A., Varjas, V., Kamer, L., et al. (2015) · Polymers for Advanced Technologies · doi:10.1002/pat.3589 · Cited by 51
Nakajima, A., Nakajima, F., Shimizu, S., Ogasawara, A., Wanaka, A., Moriya, H., Einhorn, T. A., & Yamazaki, M. (2001) · Bone · doi:10.1016/s8756-3282(01)00604-4 · Cited by 44
Marcián, P., Narra, N., Borák, L., et al. (2019) · Computers in Biology and Medicine · doi:10.1016/j.compbiomed.2019.04.016 · Cited by 41
Rongen, J. J., van Bochove, B., Hannink, G., Grijpma, D. W., & Buma, P. (2016) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35826 · Cited by 34
Self-citationTrends and Outcomes of Management of Mandibular Fractures
Hassanein, A. G. (2019) · Journal of Craniofacial Surgery · doi:10.1097/scs.0000000000005469 · Cited by 30
Bone Flap Resorption Following Cranioplasty after Decompressive Craniectomy: Preliminary Report
Kim, J. S., Cheong, J. H., Ryu, J. I., et al. (2015) · Korean Journal of Neurotrauma · doi:10.13004/kjnt.2015.11.1.1 · Cited by 29
Teotia, A. K., Qayoom, I., & Kumar, A. (2018) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b00227 · Cited by 23
Self-citationHorstmann, P. F., Raina, D. B., Isaksson, H., Hettwer, W. H., Lidgren, L., Petersen, M. M., & Tägil, M. (2017) · Tissue Engineering Part A · doi:10.1089/ten.tea.2017.0040 · Cited by 22
PMMA-CNT-HAp nanocomposites optimized for 3D-printing applications
Esmi, A., Jahani, Y., Yousefi, A. A., et al. (2019) · Materials Research Express · doi:10.1088/2053-1591/ab2157 · Cited by 22
Zeng, N., van Leeuwen, A. C., Grijpma, D. W., Bos, R. R. M., & Kuijer, R. (2016) · Journal of Cranio-Maxillofacial Surgery · doi:10.1016/j.jcms.2016.12.008 · Cited by 18
Jeyaraj, P. (2019) · Journal of Maxillofacial and Oral Surgery · doi:10.1007/s12663-019-01258-1 · Cited by 11
Okada, M., Yano, K., Namikawa, T., Uemura, T., Hoshino, M., Kazuki, K., Takaoka, K., & Nakamura, H. (2011) · Plastic & Reconstructive Surgery · doi:10.1097/prs.0b013e3181f95a73 · Cited by 8
Lehtinen, P., Kaivola, M., & Partanen, J. P. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.05.006 · Cited by 6
Self-citationTeotia, A. K., Raina, D. B., Isaksson, H., et al. (2019) · Multifunctional Materials · doi:10.1088/2399-7532/aafc5b · Cited by 6
Self-citation
Research works printed but not linked: 2
- Key J., 1934, J. Bone Jt. Surg., 16, 176
- Bartee B. K., 1995, J. Oral Implantol., 21, 88
Cited by
Wu, Z., Bai, J., Ge, G., Wang, T., Feng, S., Ma, Q., Liang, X., Li, W., Zhang, W., Xu, Y., et al. (2022) · Advanced Healthcare Materials · doi:10.1002/adhm.202200298 · Cited by 147
Li, M., Bai, J., Tao, H., Hao, L., Yin, W., Ren, X., Gao, A., Li, N., Wang, M., Fang, S., et al. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.07.002 · Cited by 122
A novel classification of bone graft materials
Wickramasinghe, M. L., Dias, G. J., & Premadasa, K. M. G. P. (2022) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.35029 · Cited by 106
3D printing of inorganic-biopolymer composites for bone regeneration
van der Heide, D., Cidonio, G., Stoddart, M. J., & D’Este, M. (2022) · Biofabrication · doi:10.1088/1758-5090/ac8cb2 · Cited by 82
Zhou, Q., Su, X., Wu, J., Zhang, X., Su, R., Ma, L., Sun, Q., & He, R. (2023) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.2c01164 · Cited by 70
Metadata
- Authors
- Teotia, A. K., Dienel, K., Qayoom, I., van Bochove, B., Gupta, S., Partanen, J., Seppälä, J., & Kumar, A.
- Affiliations
- Indian Institute of Technology Kanpur (IN)
- Aalto University (FI)
- Polymer Technology, School of Chemical Engineering, Aalto University, Espoo 02150, Finland
- Corresponding author
- Kumar, Ashok
- ORCID
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-09-30
- Volume
- 12
- Issue
- 43
- Pages
- 48340-48356
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W3091599066
- Semantic Scholar
- c106f0a6b33b86852fc65370fa51414e0e098165
- Cited by
- 53
- References
- 62
- Citations by year
- 2026: 2 · 2025: 16 · 2024: 13 · 2023: 10 · 2022: 9 · 2021: 3
- FWCI
- 1.73
- Type
- journal article
- Language
- en
- Open access
- green
- research.aalto.fi
- Licence
- Locations
- ACS Applied Materials & Interfaces (publishedVersion)
- PubMed (publishedVersion)
- Aaltodoc (Aalto University) (submittedVersion, other-oa)
- Funders
- Indian Institute of Technology Kanpur
- Science and Engineering Research Board (IPA/2020/000026)
- Department of Biotechnology , Ministry of Science and Technology (BT/IN/Sweden/08/AK/2017-18)
- Department of Science and Technology, Ministry of Science and Technology (DST/NM/NT-2018/48)
- Ministry of Human Resource Development (MHRD_IITK_006, SPARC/2018?2019/P612/SL)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › Bone Tissue Engineering Materials
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Engineering › Biomedical Engineering › Anatomy and Medical Technology
- Keywords
- bone regeneration, critical-size bone defect, 3D-printed scaffolds, composite resin, poly(trimethylene carbonate), bioactive ceramics, photocuring, cryogels, bone morphogenetic proteins, zoledronic acid, synthetic bone substitutes, rabbit tibia, porous scaffolds, biocompatibility
- MeSH terms
- Animals, Biocompatible Materials, Bone Regeneration, Male, Osteogenesis, Particle Size, Rabbits, Surface Properties, Porosity, Bone Substitutes, Tissue Scaffolds, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
A language model drew the claims from the paper on 2026-10-11, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-11 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.