Effect of Dispersion Solvents and Ionomers on the Rheology of Catalyst Inks and Catalyst Layer Structure for Proton Exchange Membrane Fuel Cells
The DOI matches its Crossref record; 55 of the 55 references it cites were found in a registry or an index.
Abstract
This study investigated the effects of the dielectric constant (ε) of a dispersion solvent and ionomer content on the rheology of graphitized carbon (GC)-supported Pt catalyst ink and the structure of catalyst layers (CLs). The ionomer dispersions and catalyst inks were tested using rheological techniques, zeta (ξ) potential, and dynamic light scattering measurements. Results showed that increases in the solvent ε or ionomer content increased the ξ-potential of catalyst particles in the ink, which reduced the catalyst agglomerate size. Steady-state and oscillation scans showed that the Pt/GC catalyst ink had shear-thinning properties and gel-like behavior. The ink with a solvent ε of 40 tended to be more Newtonian fluid, with low yield stress (σ y ). The ionomer content altered the rheology of the ink by changing the internal interaction of inks. Solvents with ε of 70 and 55 enhanced the adsorption of ionomers onto catalysts, thereby increasing the adhesion between ink particles and reducing the risk of CL cracking. As the ionomer content increased, the catalyst absorbed more ionomers in inks, increasing the fracture toughness of CLs, which reduced the crack width.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The thixotropy of ink could be regulated by varying the dispersion method [28] or adjusting the dielectric constant of solvent or varying I/C ratio [79].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [79]
In the citing paper
“Therefore, a comprehensive evaluation including the aggregation scale, particle size distribution, zeta potential (ξ), and rheological properties such as viscosity, surface tension, and contact angle is necessary [180].”
From Recent Advances on PEM Fuel Cells: From Key Materials to Membrane Electrode Assembly (2023) · cites this paper as [180]
In the citing paper
“It was reported that the catalyst can absorb more ionomers in a high I/C ratio, thus increasing the fracture toughness of catalyst layers and reducing crack width [180].”
From Recent Advances on PEM Fuel Cells: From Key Materials to Membrane Electrode Assembly (2023) · cites this paper as [180]
Citations
Cites
New Insights into Perfluorinated Sulfonic-Acid Ionomers
Kusoglu, A., & Weber, A. Z. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00159 · Cited by 2,432
Theory of polyelectrolytes in solutions and at surfaces
DOBRYNIN, A., & RUBINSTEIN, M. (2005) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2005.07.006 · Cited by 1,539
Zhao, J., & Li, X. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.112022 · Cited by 430
Generality of shear thickening in dense suspensions
Brown, E., Forman, N. A., Orellana, C. S., Zhang, H., Maynor, B. W., Betts, D. E., DeSimone, J. M., & Jaeger, H. M. (2010) · Nature Materials · doi:10.1038/nmat2627 · Cited by 395
New Preparation Method for Polymer‐Electrolyte Fuel Cells
Uchida, M., Aoyama, Y., Eda, N., & Ohta, A. (1995) · Journal of The Electrochemical Society · doi:10.1149/1.2044068 · Cited by 282
Kodama, K., Motobayashi, K., Shinohara, A., Hasegawa, N., Kudo, K., Jinnouchi, R., Osawa, M., & Morimoto, Y. (2018) · ACS Catalysis · doi:10.1021/acscatal.7b03571 · Cited by 258
Xing, L., Shi, W., Su, H., Xu, Q., Das, P. K., Mao, B., & Scott, K. (2019) · Energy · doi:10.1016/j.energy.2019.04.084 · Cited by 256
Hou, J., Yang, M., Ke, C., Wei, G., Priest, C., Qiao, Z., Wu, G., & Zhang, J. (2020) · EnergyChem · doi:10.1016/j.enchem.2019.100023 · Cited by 246
Ngo, T. T., Yu, T. L., & Lin, H.-L. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.10.055 · Cited by 231
Electrocatalysts for PEM Fuel Cells
Ioroi, T., Siroma, Z., Yamazaki, S., & Yasuda, K. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201801284 · Cited by 225
Cited by
Recent Advances on PEM Fuel Cells: From Key Materials to Membrane Electrode Assembly
Mo, S., Du, L., Huang, Z., Chen, J., Zhou, Y., Wu, P., Meng, L., Wang, N., Xing, L., Zhao, M., et al. (2023) · Electrochemical Energy Reviews · doi:10.1007/s41918-023-00190-w · Cited by 277
“It was reported that the catalyst can absorb more ionomers in a high I/C ratio, thus increasing the fracture toughness of catalyst layers and reducing crack width [180].”
Liu, H., Ney, L., Zamel, N., & Li, X. (2022) · Applied Sciences · doi:10.3390/app12083776 · Cited by 85
“The thixotropy of ink could be regulated by varying the dispersion method [28] or adjusting the dielectric constant of solvent or varying I/C ratio [79].”
BackgroundPhysical Degradation of Anode Catalyst Layer in Proton Exchange Membrane Water Electrolysis
Xu, S., Liu, H., Zheng, N., & Tao, H. B. (2024) · Advanced Materials Interfaces · doi:10.1002/admi.202400549 · Cited by 73
Liu, P., Yang, D., Li, B., Zhang, C., & Ming, P. (2023) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2023.02.022 · Cited by 49
Self-citationLiu, P., Li, B., Yang, D., Zhang, C., & Ming, P. (2022) · Journal of Power Sources · doi:10.1016/j.jpowsour.2022.232427 · Cited by 42
Self-citationCheng, X., Wei, G., Luo, L., Yin, J., Shen, S., & Zhang, J. (2023) · Electrochemical Energy Reviews · doi:10.1007/s41918-023-00195-5 · Cited by 32
Lu, Y., Li, S., & Qi, R. (2024) · International Journal of Green Energy · doi:10.1080/15435075.2024.2335507 · Cited by 32
Wang, S., Song, J., Zhao, W., Guan, P., Li, M., Zhang, M., Zou, Y., Liu, J., Chen, G., Ren, H., et al. (2024) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2024.06.004 · Cited by 28
Mehrazi, S., Homayouni, T., Kakati, N., Sarker, M., Rolfe, P., & Chuang, P. A. (2024) · Applied Energy · doi:10.1016/j.apenergy.2024.122680 · Cited by 28
So, S., & Oh, K. (2023) · Journal of Power Sources · doi:10.1016/j.jpowsour.2023.232664 · Cited by 25
Solvent Effects on the Catalyst Ink and Layer Microstructure for Anion Exchange Membrane Fuel Cells
Han, C., Shi, W., Huang, M., Wang, Q., Yang, J., Chen, J., Ding, R., & Yin, X. (2024) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c14404 · Cited by 23
Ionomeric binders in polymer electrolyte fuel cells: roles, challenges, and advances
Yu, W., Luo, F., Liang, X., Jiang, C., Xu, Y., Liu, Z., An, Q., Guiver, M. D., Wu, L., & Xu, T. (2025) · Chemical Society Reviews · doi:10.1039/d5cs00406c · Cited by 21
Zhang, D., Ye, K., & Li, X. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c11463 · Cited by 16
Fang, L., Huo, J., Chen, Y., Lin, H., Li, B., Cui, Z., & Du, L. (2025) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.4c19171 · Cited by 16
Self-citationGuo, Y., Yang, D., Tang, H., Li, B., Yang, D., Ming, P., & Zhang, C. (2022) · Physics of Fluids · doi:10.1063/5.0102157 · Cited by 16
Self-citationKang, J., Zheng, W., Chen, S., Yang, D., Li, B., Zhang, C., & Ming, P. (2024) · Journal of Power Sources · doi:10.1016/j.jpowsour.2024.235269 · Cited by 16
Self-citationZhou, Z., Yang, D., Guo, Y., & Li, B. (2022) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2022.09.242 · Cited by 16
Self-citationScreen Printing Catalyst Inks With Enhanced Process Stability for PEM Fuel Cell Production
Ney, L., Seidl, N., Singh, R., Schneider, P., Stross, D., Göppentin, A., Tepner, S., Klingele, M., & Keding, R. J. (2024) · Fuel Cells · doi:10.1002/fuce.202400158 · Cited by 16
Zhou, Y., Kang, J., Chen, B., Zheng, W., Zhang, C., Ming, P., Pan, F., Wang, J., & Li, B. (2025) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2025.103468 · Cited by 17
Self-citationInfluence of carboxymethyl cellulose solutions on rheological properties of Laponite dispersions
Corzo, I. J. M., da Fonsêca, J. H. L., & d’Ávila, M. A. (2023) · Rheologica Acta · doi:10.1007/s00397-023-01401-3 · Cited by 14
Liu, P., Yang, D., Li, B., Kang, J., Zhang, C., Ming, P., Pan, X., & Liu, H. (2023) · Journal of Power Sources · doi:10.1016/j.jpowsour.2023.233817 · Cited by 13
Self-citationWang, M., Zhang, J., Kellner, S., Stephens, I. E. L., & Titirici, M. (2024) · Journal of Materials Chemistry A · doi:10.1039/d4ta03864a · Cited by 13
Pal, S., Sarkar, A., Satra, J., Mondal, P., Ray, P., Srivastava, D. N., Adhikary, B., & Show, B. (2022) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.2c01887 · Cited by 13
Multimodal Data-Driven Prediction of PEMFC Performance and Process Conditions Using Deep Learning
Shin, S., Kim, J., Lee, S.-H., Shin, T. H., & Ryu, G.-A. (2024) · IEEE Access · doi:10.1109/access.2024.3472849 · Cited by 12
Performance and relative humidity tolerance: Impact of ionomer loading versus equivalent weight
Peng, Y., Choi, J., Bai, K., Tian, L., Pei, K. L., Chen, M., & Banham, D. (2025) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2025.01.069 · Cited by 10
Ge, C., Gao, H., Guo, T., Wu, L., Zhou, X., Cai, D., Geng, K., & Li, N. (2025) · Journal of Power Sources · doi:10.1016/j.jpowsour.2025.236246 · Cited by 10
Burghart, J., Ovarlez, G., & Medina‐González, Y. (2025) · Journal of Power Sources · doi:10.1016/j.jpowsour.2025.238497 · Cited by 10
Grebener, L., Odungat, A. S., Zhu, Y., Pasdag, O., Radev, I., Nürenberg, E., Kubina, A., Peinecke, V., Kohsakowski, S., Segets, D., et al. (2025) · Journal of Power Sources · doi:10.1016/j.jpowsour.2025.236457 · Cited by 12
Choi, W.-J., Kang, I., Yu, D. M., Yoon, S. J., So, S., & Oh, K. (2024) · Korean Journal of Chemical Engineering · doi:10.1007/s11814-024-00221-2 · Cited by 10
Li, M., Ding, H., Song, J., Hao, B., Zeng, R., Li, Z., Wu, X., Fink, Z., Zhou, L., Russel, T. P., et al. (2024) · Advanced Science · doi:10.1002/advs.202403647 · Cited by 11
Song, S., Qiu, D., Xu, Z., Yi, P., & Peng, L. (2024) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2024.110405 · Cited by 9
Kang, J., Zheng, W., Zhou, Y., Chen, B., Chen, S., Li, B., Zhang, C., Gong, Z., & Ming, P. (2025) · Journal of Power Sources · doi:10.1016/j.jpowsour.2025.236991 · Cited by 7
Self-citationCheng, F., Guo, Y., Liang, X., Yue, F., Yan, Y., Li, Y., Zhu, Y., He, Y., & Du, S. (2024) · Catalysts · doi:10.3390/catal14060344 · Cited by 8
Self-citationManufacturing and structural control of slurry-cast catalyst layers for AEMFC
Hyun, J., Lee, D. W., Oh, E., Bae, H., Park, J., Doo, G., & Kim, H. (2023) · Journal of Power Sources · doi:10.1016/j.jpowsour.2023.233161 · Cited by 7
Zhang, P., Yang, D., Li, B., Ming, P., Yang, D., & Zhang, C. (2024) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2024.05.069 · Cited by 6
Self-citationZhao, X., Gao, S., Wang, S., Hou, T., Bao, Z., Guo, W. F., Deng, C., Kong, F., & Yin, G. (2025) · ACS Catalysis · doi:10.1021/acscatal.5c03319 · Cited by 5
Static and dynamic rheo-impedance characterization of PEMFC catalyst inks
Tanaka, A., Mora, J. M., Nagato, K., & Chuang, P. A. (2026) · Electrochemistry Communications · doi:10.1016/j.elecom.2026.108165 · Cited by 5
Liu, P., Yang, D., Li, B., Zhang, C., & Ming, P. (2022) · Membranes · doi:10.3390/membranes12050541 · Cited by 5
Self-citationPark, J.-H., Heo, J., Park, H. S., & Park, J. (2025) · Journal of Power Sources · doi:10.1016/j.jpowsour.2025.238180 · Cited by 3
Kokhanov, A., Moguchikh, E. A., Pavlets, A. S., Pankov, I. V., Alekseenko, D. V., & Alekseenko, A. A. (2025) · Catalysts · doi:10.3390/catal15121140 · Cited by 4
Yoshino, S., Harada, M., Hasegawa, N., Yomo, S., Koiwai, A., Minami, S., Yamakawa, S., & Jinnouchi, R. (2026) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5c17388 · Cited by 3
Han, L., Gong, X. Q., Wang, Y., Wang, D., Ru, C., Wang, X., Guo, D., Liu, F., Sheng, X., & Ge, J. (2025) · Chinese Chemical Letters · doi:10.1016/j.cclet.2025.111432 · Cited by 3
Singh, M. K., Mathew, G., & Kurungot, S. (2025) · ACS Applied Energy Materials · doi:10.1021/acsaem.5c03025 · Cited by 2
Chen, B., Zhou, Y., Kang, J., Wang, J., Ming, P., & Li, B. (2025) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2025.152401 · Cited by 3
Self-citationYang, D., Guo, Y., Zhang, Z., Wang, J., Zheng, W., Yang, D., Ming, P., & Li, B. (2026) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2026.154539 · Cited by 2
Self-citationBurghart, J., Meeker, S. P., Medina‐González, Y., & Ovarlez, G. (2026) · Macromolecules · doi:10.1021/acs.macromol.6c00383 · Cited by 2
Elshamy, M., Metzler, L., Disch, J., Vierrath, S., & Koch, S. (2024) · RSC Advances · doi:10.1039/d4ra03969f · Cited by 2
Above 2 W cm −2 direct liquid fuel cells enabled by mitigating cathode polarization
Guo, Y., Gui, F., Han, Y., Cao, Y., Hu, Z., Han, Y., Tan, Q., Che, Y., Zhang, C., Zhao, Y., et al. (2025) · EES Catalysis · doi:10.1039/d5ey00005j · Cited by 2
Self-citationChen, Y., Yang, D., Kang, J., Li, B., Yang, D., Ming, P., & Zhang, C. (2025) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2025.150679 · Cited by 2
Self-citationXu, W., Luo, C., Wan, K., Pei, X., Hua, M., Zhang, Z., Zhang, C., Ming, P., & Li, B. (2026) · Chemical Engineering Journal · doi:10.1016/j.cej.2026.172599 · Cited by 2
Self-citationTakeshita, K., Wijakmatee, T., Matsumoto, H., Yoshikawa, S., & Saito, T. (2026) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2026.139952 · Cited by 1
Galkina, I. P., Faid, A. Y., Grigorev, N., Jiang, W., Borowski, P., Sunde, S., Shviro, M., Lehnert, W., Scheepers, F., & Mechler, A. K. (2026) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2026.155383 · Cited by 1
Multiscale Pore Structures across Fuel Cell Components
Li, D., Zhou, Z., Wang, P., & Sun, C. (2026) · ACS Materials Letters · doi:10.1021/acsmaterialslett.6c00363 · Cited by 1
Shitanda, I., Tsunegi, H., Yamagata, Y., Miyamoto, K., Watanabe, H., & Itagaki, M. (2026) · Electrochemistry · doi:10.5796/electrochemistry.26-00048 · Cited by 1
The Role of Dispersion Solvent Composition in Pemfc Electrodes: Performance and Durability InsightsPreprint
Luo, S., Li, G., Zang, Z., Li, X., Wang, Q., Wang, Q., Xu, T., Xing, D., & Yi, B. (2025) · SSRN Electronic Journal · doi:10.2139/ssrn.5081104
The Solvent Effect on Ionomer Self-Assembly: From Molecular Morphology to Catalyst Layer Performance
Yang, D., Chu, T., Guo, Y., Zhang, Z., Wang, J., Zheng, W., Yang, D., Ming, P., & Li, B. (2025) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5c18925
Self-citationYang, D., Chu, T., Zhang, Z., Wang, J., zheng, W., Yang, D., Ming, P., & Li, B. (2026) · Journal of Power Sources · doi:10.1016/j.jpowsour.2026.239423
Self-citationInfluence of Solvents on Spray-Coated Catalyst for Direct Methanol Fuel Cells
Ng, W. W., Thiam, H. S., Chen, W., Pang, Y. L., Lim, Y. S., & Teoh, H. C. (2026) · doi:10.1109/cpeee69412.2026.11521592
Burghart, J., Cogné, H., Meeker, S. P., Medina‐González, Y., & Ovarlez, G. (2026) · Macromolecules · doi:10.1021/acs.macromol.6c01444
Toudret, P. (2023) · theses.fr (ABES) · doi:10.70675/d8ca51aaze742z4f43zb0ffz8f031b7fa4d9 · Cited by 1
Ionomer-directed reaction pathway for CO2 electroreduction
Yin, Y., Kang, X., & Han, B. (2026) · National Science Review · doi:10.1093/nsr/nwag364
Role of initial Pt/C aggregate state in PEFC catalyst ink microstructure formation
Miskan, M., Tanaka, A., Sakuramoto, K., Nagato, K., & Tsujiguchi, T. (2026) · Chemical Engineering Journal · doi:10.1016/j.cej.2026.180577
Kim, K.-D., KIM, J., Kang, B., LEE, S., PARK, J., BAEK, C.-M., & Kim, T. (2026) · Journal of Hydrogen and New Energy · doi:10.7316/jhne.2026.37.4.359
Jayakumar, A., Goswami, S., Pal, T., Banerjee, R., Nair, R. R., & Tiwary, C. S. (2026) · ACS Applied Engineering Materials · doi:10.1021/acsaenm.6c01115
Singh, M. U., Robert, R. M., Samudre, N. S., Krishnamurty, S., & Kurungot, S. (2026) · Advanced Energy Materials · doi:10.1002/aenm.71724
Xiang, Q., Jiang, S., Yang, N., Xie, Z., Li, L., & Wei, Z. (2026) · Physical Chemistry Chemical Physics · doi:10.1039/d6cp03392j
Kim, S., Woo, S., Park, S., Jung, N., Yim, S., & Kang, Y. S. (2026) · Fuel Cells · doi:10.1002/fuce.70180
Metadata
- Authors
- Guo, Y., Yang, D., Li, B., Yang, D., Ming, P., & Zhang, C.
- Affiliations
- Tongji University (CN)
- Corresponding author
- Li, Bing
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2021-06-04
- Volume
- 13
- Issue
- 23
- Pages
- 27119-27128
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W3164468172
- Cited by
- 65
- References
- 55
- Citations by year
- 2026: 17 · 2025: 18 · 2024: 15 · 2023: 9 · 2022: 6
- FWCI
- 2.21
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- ACS Applied Materials & Interfaces (publishedVersion)
- PubMed (publishedVersion)
- Funders
- Ministry of Science and Technology of the People's Republic of China (2018YFB0106503)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
- Physical Sciences › Materials Science › Materials Chemistry › Advancements in Solid Oxide Fuel Cells
- Keywords
- proton exchange membrane fuel cells, catalyst ink, catalyst layer structure, rheology, dielectric constant, ionomer content, platinum catalysts, graphitized carbon support, zeta potential, catalyst agglomerates, shear thinning, yield stress, gel-like behavior, ionomer adsorption, fracture toughness
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.