Effect of Dispersion Solvents and Ionomers on the Rheology of Catalyst Inks and Catalyst Layer Structure for Proton Exchange Membrane Fuel Cells
The DOI matches its Crossref record; 55 of the 55 references it cites were found in a registry or an index.
Abstract
This study investigated the effects of the dielectric constant (ε) of a dispersion solvent and ionomer content on the rheology of graphitized carbon (GC)-supported Pt catalyst ink and the structure of catalyst layers (CLs). The ionomer dispersions and catalyst inks were tested using rheological techniques, zeta (ξ) potential, and dynamic light scattering measurements. Results showed that increases in the solvent ε or ionomer content increased the ξ-potential of catalyst particles in the ink, which reduced the catalyst agglomerate size. Steady-state and oscillation scans showed that the Pt/GC catalyst ink had shear-thinning properties and gel-like behavior. The ink with a solvent ε of 40 tended to be more Newtonian fluid, with low yield stress (σ y ). The ionomer content altered the rheology of the ink by changing the internal interaction of inks. Solvents with ε of 70 and 55 enhanced the adsorption of ionomers onto catalysts, thereby increasing the adhesion between ink particles and reducing the risk of CL cracking. As the ionomer content increased, the catalyst absorbed more ionomers in inks, increasing the fracture toughness of CLs, which reduced the crack width.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The thixotropy of ink could be regulated by varying the dispersion method [28] or adjusting the dielectric constant of solvent or varying I/C ratio [79].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [79]
In the citing paper
“Therefore, a comprehensive evaluation including the aggregation scale, particle size distribution, zeta potential (ξ), and rheological properties such as viscosity, surface tension, and contact angle is necessary [180].”
From Recent Advances on PEM Fuel Cells: From Key Materials to Membrane Electrode Assembly (2023) · cites this paper as [180]
In the citing paper
“It was reported that the catalyst can absorb more ionomers in a high I/C ratio, thus increasing the fracture toughness of catalyst layers and reducing crack width [180].”
From Recent Advances on PEM Fuel Cells: From Key Materials to Membrane Electrode Assembly (2023) · cites this paper as [180]
Citations
Cites
New Insights into Perfluorinated Sulfonic-Acid Ionomers
Kusoglu, A., & Weber, A. Z. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00159 · Cited by 2,432
Theory of polyelectrolytes in solutions and at surfaces
DOBRYNIN, A., & RUBINSTEIN, M. (2005) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2005.07.006 · Cited by 1,539
Zhao, J., & Li, X. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.112022 · Cited by 430
Generality of shear thickening in dense suspensions
Brown, E., Forman, N. A., Orellana, C. S., Zhang, H., Maynor, B. W., Betts, D. E., DeSimone, J. M., & Jaeger, H. M. (2010) · Nature Materials · doi:10.1038/nmat2627 · Cited by 395
New Preparation Method for Polymer‐Electrolyte Fuel Cells
Uchida, M., Aoyama, Y., Eda, N., & Ohta, A. (1995) · Journal of The Electrochemical Society · doi:10.1149/1.2044068 · Cited by 282
Kodama, K., Motobayashi, K., Shinohara, A., Hasegawa, N., Kudo, K., Jinnouchi, R., Osawa, M., & Morimoto, Y. (2018) · ACS Catalysis · doi:10.1021/acscatal.7b03571 · Cited by 258
Xing, L., Shi, W., Su, H., Xu, Q., Das, P. K., Mao, B., & Scott, K. (2019) · Energy · doi:10.1016/j.energy.2019.04.084 · Cited by 256
Hou, J., Yang, M., Ke, C., Wei, G., Priest, C., Qiao, Z., Wu, G., & Zhang, J. (2020) · EnergyChem · doi:10.1016/j.enchem.2019.100023 · Cited by 246
Ngo, T. T., Yu, T. L., & Lin, H.-L. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.10.055 · Cited by 231
Electrocatalysts for PEM Fuel Cells
Ioroi, T., Siroma, Z., Yamazaki, S., & Yasuda, K. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201801284 · Cited by 225
Youssry, M., Madec, L., Soudan, P., Cerbelaud, M., Guyomard, D., & Lestriez, B. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c3cp51371h · Cited by 186
Screen-printing inks for the fabrication of solid oxide fuel cell films: A review
Somalu, M. R., Muchtar, A., Daud, W. R. W., & Brandon, N. P. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.11.008 · Cited by 178
Materials, Processes, and Facile Manufacturing for Bioresorbable Electronics: A Review
Yu, X., Shou, W., Mahajan, B. K., Huang, X., & Pan, H. (2018) · Advanced Materials · doi:10.1002/adma.201707624 · Cited by 176
Morphology and properties of Nafion membranes prepared by solution casting
Ma, C.-H., Yu, T. L., Lin, H.-L., Huang, Y.-T., Chen, Y.-L., Jeng, U.-S., Lai, Y.-H., & Sun, Y.-S. (2009) · Polymer · doi:10.1016/j.polymer.2009.01.060 · Cited by 160
Rheological Investigation on the Microstructure of Fuel Cell Catalyst Inks
Khandavalli, S., Park, J. H., Kariuki, N. N., Myers, D. J., Stickel, J. J., Hurst, K., Neyerlin, K. C., Ulsh, M., & Mauger, S. A. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b15039 · Cited by 153
Sassin, M. B., Garsany, Y., Gould, B. D., & Swider-Lyons, K. E. (2017) · Analytical Chemistry · doi:10.1021/acs.analchem.6b03005 · Cited by 143
Shukla, S., Bhattacharjee, S., Weber, A. Z., & Secanell, M. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0961706jes · Cited by 137
Controlling cracking formation in fuel cell catalyst layers
Kumano, N., Kudo, K., Suda, A., Akimoto, Y., Ishii, M., & Nakamura, H. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.02.058 · Cited by 135
Catalyst layer ink interactions that affect coatability
Dixit, M. B., Harkey, B. A., Shen, F., & Hatzell, K. B. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0191805jes · Cited by 126
Inherent Acidity of Perfluorosulfonic Acid Ionomer Dispersions and Implications for Ink Aggregation
Berlinger, S. A., McCloskey, B. D., & Weber, A. Z. (2018) · The Journal of Physical Chemistry B · doi:10.1021/acs.jpcb.8b06493 · Cited by 122
Modeling of PEM Fuel Cell Catalyst Layers: Status and Outlook
Sui, P., Zhu, X., & Djilali, N. (2019) · Electrochemical Energy Reviews · doi:10.1007/s41918-019-00043-5 · Cited by 120
Wang, W., Chen, S., Li, J., & Wang, W. (2015) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2015.02.027 · Cited by 115
Roll-to-roll production of catalyst coated membranes for low-temperature electrolyzers
Park, J., Kang, Z., Bender, G., Ulsh, M., & Mauger, S. A. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228819 · Cited by 115
Solution properties of nafion in methanol/water mixture solvent
Lee, S.-J., Yu, T. L., Lin, H.-L., Liu, W.-H., & Lai, C. L. (2004) · Polymer · doi:10.1016/j.polymer.2004.01.076 · Cited by 108
Understanding inks for porous-electrode formation
Hatzell, K. B., Dixit, M. B., Berlinger, S. A., & Weber, A. Z. (2017) · J. Mater. Chem. A · doi:10.1039/c7ta07255d · Cited by 97
Woo, S., Lee, S., Taning, A. Z., Yang, T., Park, S., & Yim, S. (2020) · Current Opinion in Electrochemistry · doi:10.1016/j.coelec.2020.03.006 · Cited by 97
Balu, R., Choudhury, N. R., Mata, J. P., de Campo, L., Rehm, C., Hill, A. J., & Dutta, N. K. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b20645 · Cited by 96
Effect of dispersion solvent in catalyst ink on proton exchange membrane fuel cell performance
Huang, D.-C., Yu, P.-J., Liu, F.-J., Huang, S.-L., Hsueh, K.-L., Chen, Y.-C., Wu, C.-H., Chang, W.-C., & Tsau, F.-H. (2011) · International Journal of Electrochemical Science · doi:10.1016/s1452-3981(23)18202-2 · Cited by 93
Ngo, T. T., Yu, T. L., & Lin, H.-L. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.03.055 · Cited by 92
Du, S., Li, W., Wu, H., Abel Chuang, P.-Y., Pan, M., & Sui, P.-C. (2020) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2020.07.241 · Cited by 88
Molecular Dynamics Study of Ionomer Adsorption at a Carbon Surface in Catalyst Ink
Mashio, T., Ohma, A., & Tokumasu, T. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.04.004 · Cited by 84
Dispersion of Rod-like Particles of Nafion in Salt-Free Water/1-Propanol and Water/Ethanol Solutions
Yamaguchi, M., Matsunaga, T., Amemiya, K., Ohira, A., Hasegawa, N., Shinohara, K., Ando, M., & Yoshida, T. (2014) · The Journal of Physical Chemistry B · doi:10.1021/jp506814m · Cited by 81
Gravure coating for roll-to-roll manufacturing of proton-exchange-membrane fuel cell catalyst layers
Mauger, S. A., Neyerlin, K. C., Yang-Neyerlin, A. C., More, K. L., & Ulsh, M. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0091813jes · Cited by 81
Kusano, T., Hiroi, T., Amemiya, K., Ando, M., Takahashi, T., & Shibayama, M. (2015) · Polymer Journal · doi:10.1038/pj.2015.36 · Cited by 74
Khandavalli, S., Park, J. H., Kariuki, N. N., Zaccarine, S. F., Pylypenko, S., Myers, D. J., Ulsh, M., & Mauger, S. A. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b14415 · Cited by 74
Influence of ionomer adsorption on agglomerate structures in high-solid catalyst inks
Kumano, N., Kudo, K., Akimoto, Y., Ishii, M., & Nakamura, H. (2020) · Carbon · doi:10.1016/j.carbon.2020.07.047 · Cited by 61
Khandavalli, S., Iyer, R., Park, J. H., Myers, D. J., Neyerlin, K. C., Ulsh, M., & Mauger, S. A. (2020) · Langmuir · doi:10.1021/acs.langmuir.0c02015 · Cited by 56
Enabling industrial production of electrodes by use of slot-die coating for HT-PEM fuel cells
Bodner, M., García, H. R., Steenberg, T., Terkelsen, C., Alfaro, S. M., Avcioglu, G. S., Vassiliev, A., Primdahl, S., & Hjuler, H. A. (2019) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2018.11.091 · Cited by 54
Zeta potential of Nafion molecules in isopropanol‐water mixture solvent
Zhang, H., Pan, J., He, X., & Pan, M. (2008) · Journal of Applied Polymer Science · doi:10.1002/app.27473 · Cited by 51
Yoshimune, W., & Harada, M. (2019) · Chemistry Letters · doi:10.1246/cl.190017 · Cited by 51
The dielectric constant: Reconciling simulation and experiment
Jorge, M., & Lue, L. (2019) · The Journal of Chemical Physics · doi:10.1063/1.5080927 · Cited by 50
Kuroki, H., Onishi, K., Asami, K., & Yamaguchi, T. (2019) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.9b02111 · Cited by 45
Impact of Nonadsorbed Ionomer on Viscosity of Catalyst Inks for Polymer Electrolyte Fuel Cells
Yoshimune, W., & Harada, M. (2020) · Bulletin of the Chemical Society of Japan · doi:10.1246/bcsj.20190321 · Cited by 44
Gomes Bezerra, C. A., Deiner, L. J., & Tremiliosi-Filho, G. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201900703 · Cited by 43
Wang, J., Xue, Q., Li, B., Yang, D., Lv, H., Xiao, Q., Ming, P., Wei, X., & Zhang, C. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b17248 · Cited by 40
Self-citationThoma, M., Lin, W., Hoffmann, E., Sattes, M.-M., Segets, D., Damm, C., & Peukert, W. (2018) · Langmuir · doi:10.1021/acs.langmuir.8b02726 · Cited by 37
Drábek, J., Zatloukal, M., & Martyn, M. (2017) · Journal of Non-Newtonian Fluid Mechanics · doi:10.1016/j.jnnfm.2017.11.009 · Cited by 35
Wang, Z., Tang, H., Li, J., Zeng, Y., Chen, L., & Pan, M. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.096 · Cited by 27
Chu, T., Xie, M., Yang, D., Ming, P., Li, B., & Zhang, C. (2020) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2020.07.134 · Cited by 27
Self-citationElectrostatic spraying of membrane electrode for proton exchange membrane fuel cell
Liu, R., Zhou, W., Wan, L., Zhang, P., Li, S., Gao, Y., Xu, D., Zheng, C., & Shang, M. (2020) · Current Applied Physics · doi:10.1016/j.cap.2019.09.016 · Cited by 26
Zhao, J., Li, X., & Liu, Z. (2019) · International Journal of Energy Research · doi:10.1002/er.4671 · Cited by 20
Interfacial shear rheology of perfluorosulfonic acid ionomer monolayers at the air/water interface
Kim, B. Q., Chae, J., Kim, J. Q., Kim, K.-H., & Choi, S. Q. (2019) · Journal of Rheology · doi:10.1122/1.5113739 · Cited by 15
Chen, G. H., Kelly, D. J., Shine, A., Liu, Z., Wang, L., Bliznakov, S., & Rafailovich, M. H. (2019) · MRS Communications · doi:10.1557/mrc.2019.144 · Cited by 13
Design of Interfaces and Phase Interfaces on Cathode Catalysts for Polymer Electrolyte Fuel Cells
Inoue, G., & Takenaka, S. (2020) · Chemistry Letters · doi:10.1246/cl.200649 · Cited by 9
A comprehensive QSPR model for dielectric constants of binary solvent mixtures
Soltanpour, S., Shahbazy, M., Omidikia, N., Kompany‐Zareh, M., & Baharifard, M. T. (2016) · SAR and QSAR in environmental research · doi:10.1080/1062936x.2015.1120779 · Cited by 9
Cited by
Recent Advances on PEM Fuel Cells: From Key Materials to Membrane Electrode Assembly
Mo, S., Du, L., Huang, Z., Chen, J., Zhou, Y., Wu, P., Meng, L., Wang, N., Xing, L., Zhao, M., et al. (2023) · Electrochemical Energy Reviews · doi:10.1007/s41918-023-00190-w · Cited by 277
“It was reported that the catalyst can absorb more ionomers in a high I/C ratio, thus increasing the fracture toughness of catalyst layers and reducing crack width [180].”
Liu, H., Ney, L., Zamel, N., & Li, X. (2022) · Applied Sciences · doi:10.3390/app12083776 · Cited by 85
“The thixotropy of ink could be regulated by varying the dispersion method [28] or adjusting the dielectric constant of solvent or varying I/C ratio [79].”
BackgroundPhysical Degradation of Anode Catalyst Layer in Proton Exchange Membrane Water Electrolysis
Xu, S., Liu, H., Zheng, N., & Tao, H. B. (2024) · Advanced Materials Interfaces · doi:10.1002/admi.202400549 · Cited by 73
Liu, P., Yang, D., Li, B., Zhang, C., & Ming, P. (2023) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2023.02.022 · Cited by 49
Self-citationLiu, P., Li, B., Yang, D., Zhang, C., & Ming, P. (2022) · Journal of Power Sources · doi:10.1016/j.jpowsour.2022.232427 · Cited by 42
Self-citation
Metadata
- Authors
- Guo, Y., Yang, D., Li, B., Yang, D., Ming, P., & Zhang, C.
- Affiliations
- Tongji University (CN)
- Corresponding author
- Li, Bing
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2021-06-04
- Volume
- 13
- Issue
- 23
- Pages
- 27119-27128
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W3164468172
- Cited by
- 65
- References
- 55
- Citations by year
- 2026: 17 · 2025: 18 · 2024: 15 · 2023: 9 · 2022: 6
- FWCI
- 2.21
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- ACS Applied Materials & Interfaces (publishedVersion)
- PubMed (publishedVersion)
- Funders
- Ministry of Science and Technology of the People's Republic of China (2018YFB0106503)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
- Physical Sciences › Materials Science › Materials Chemistry › Advancements in Solid Oxide Fuel Cells
- Keywords
- proton exchange membrane fuel cells, catalyst ink, catalyst layer structure, rheology, dielectric constant, ionomer content, platinum catalysts, graphitized carbon support, zeta potential, catalyst agglomerates, shear thinning, yield stress, gel-like behavior, ionomer adsorption, fracture toughness
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.