The DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.
Stabilizing the Interface of NASICON Solid Electrolyte against Li Metal with Atomic Layer Deposition
Abstract
Solid-state batteries have been considered as one of the most promising next-generation energy storage systems because of their high safety and energy density. Solid-state electrolytes are the key component of the solid-state battery, which exhibit high ionic conductivity, good chemical stability, and wide electrochemical windows. LATP [Li 1.3 Al 0.3 Ti 1.7 (PO 4 ) 3 ] solid electrolyte has been widely investigated for its high ionic conductivity. Nevertheless, the chemical instability of LATP against Li metal has hindered its application in solid-state batteries. Here, we propose that atomic layer deposition (ALD) coating on LATP surfaces is able to stabilize the LATP/Li interface by reducing the side reactions. In comparison with bare LATP, the Al 2 O 3 -coated LATP by ALD exhibits a stable cycling behavior with smaller voltage hysteresis for 600 h, as well as small resistance. More importantly, on the basis of advanced characterizations such as high-resolution transmission electron spectroscope-electron energy loss spectroscopy, the lithium penetration into the LATP bulk and Ti 4+ reduction are significantly limited. The results suggest that ALD is very effective in improving solid-state electrolyte/electrode interface stability.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electrolytes and Interphases in Li-Ion Batteries and Beyond
Xu, K. (2014) · Chemical Reviews · doi:10.1021/cr500003w · Cited by 5,566
Bachman, J. C., Muy, S., Grimaud, A., Chang, H.-H., Pour, N., Lux, S. F., Paschos, O., Maglia, F., Lupart, S., Lamp, P., et al. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00563 · Cited by 2,537
Metal–Air Batteries with High Energy Density: Li–Air versus Zn–Air
Lee, J., Tai Kim, S., Cao, R., Choi, N., Liu, M., Lee, K. T., & Cho, J. (2011) · Advanced Energy Materials · doi:10.1002/aenm.201000010 · Cited by 2,286
Negating interfacial impedance in garnet-based solid-state Li metal batteries
Han, X., Gong, Y., Fu, K., He, X., Hitz, G. T., Dai, J., Pearse, A., Liu, B., Wang, H., Rubloff, G., et al. (2017) · Nature Materials · doi:10.1038/nmat4821 · Cited by 2,025
Zhu, Y., He, X., & Mo, Y. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b07517 · Cited by 1,936
Recent advances in all-solid-state rechargeable lithium batteries
Sun, C., Liu, J., Gong, Y., Wilkinson, D. P., & Zhang, J. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.01.028 · Cited by 1,688
Self-citationElectrolytes for solid-state lithium rechargeable batteries: recent advances and perspectives
Quartarone, E., & Mustarelli, P. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00081g · Cited by 1,607
High ionic conductivity in lithium lanthanum titanate
Inaguma, Y., Liquan, C., Itoh, M., Nakamura, T., Uchida, T., Ikuta, H., & Wakihara, M. (1993) · Solid State Communications · doi:10.1016/0038-1098(93)90841-a · Cited by 1,598
Garnet-type solid-state fast Li ion conductors for Li batteries: critical review
Thangadurai, V., Narayanan, S., & Pinzaru, D. (2014) · Chemical Society Reviews · doi:10.1039/c4cs00020j · Cited by 1,534
Single lithium-ion conducting solid polymer electrolytes: advances and perspectives
Zhang, H., Li, C., Piszcz, M., Coya, E., Rojo, T., Rodriguez-Martinez, L. M., Armand, M., & Zhou, Z. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00491a · Cited by 1,187
Inorganic solid Li ion conductors: An overview
Knauth, P. (2009) · Solid State Ionics · doi:10.1016/j.ssi.2009.03.022 · Cited by 1,170
Electrode–Electrolyte Interface in Li-Ion Batteries: Current Understanding and New Insights
Gauthier, M., Carney, T. J., Grimaud, A., Giordano, L., Pour, N., Chang, H.-H., Fenning, D. P., Lux, S. F., Paschos, O., Bauer, C., et al. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b01727 · Cited by 1,028
All solid-state polymer electrolytes for high-performance lithium ion batteries
Yue, L., Ma, J., Zhang, J., Zhao, J., Dong, S., Liu, Z., Cui, G., & Chen, L. (2016) · Energy Storage Materials · doi:10.1016/j.ensm.2016.07.003 · Cited by 1,020
Artificial charge-modulationin atomic-scale perovskite titanate superlattices
Ohtomo, A., Muller, D. A., Grazul, J. L., & Hwang, H. Y. (2002) · Nature · doi:10.1038/nature00977 · Cited by 1,009
Plating a Dendrite-Free Lithium Anode with a Polymer/Ceramic/Polymer Sandwich Electrolyte
Zhou, W., Wang, S., Li, Y., Xin, S., Manthiram, A., & Goodenough, J. B. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b05341 · Cited by 1,006
Safer Electrolytes for Lithium‐Ion Batteries: State of the Art and Perspectives
Kalhoff, J., Eshetu, G. G., Bresser, D., & Passerini, S. (2015) · ChemSusChem · doi:10.1002/cssc.201500284 · Cited by 877
Koerver, R., Zhang, W., de Biasi, L., Schweidler, S., Kondrakov, A. O., Kolling, S., Brezesinski, T., Hartmann, P., Zeier, W. G., & Janek, J. (2018) · Energy & Environmental Science · doi:10.1039/c8ee00907d · Cited by 872
Next-Generation Lithium Metal Anode Engineering via Atomic Layer Deposition
Kozen, A. C., Lin, C.-F., Pearse, A. J., Schroeder, M. A., Han, X., Hu, L., Lee, S.-B., Rubloff, G. W., & Noked, M. (2015) · ACS Nano · doi:10.1021/acsnano.5b02166 · Cited by 816
Chen, R., Qu, W., Guo, X., Li, L., & Wu, F. (2016) · Materials Horizons · doi:10.1039/c6mh00218h · Cited by 797
Luo, W., Gong, Y., Zhu, Y., Li, Y., Yao, Y., Zhang, Y., Fu, K. (., Pastel, G., Lin, C., Mo, Y., et al. (2017) · Advanced Materials · doi:10.1002/adma.201606042 · Cited by 651
Hartmann, P., Leichtweiss, T., Busche, M. R., Schneider, M., Reich, M., Sann, J., Adelhelm, P., & Janek, J. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp4051275 · Cited by 523
Hausbrand, R., Cherkashinin, G., Ehrenberg, H., Gröting, M., Albe, K., Hess, C., & Jaegermann, W. (2015) · Materials Science and Engineering: B · doi:10.1016/j.mseb.2014.11.014 · Cited by 478
Li6ALa2Ta2O12 (A = Sr, Ba): Novel Garnet‐Like Oxides for Fast Lithium Ion Conduction
Thangadurai, V., & Weppner, W. (2005) · Advanced Functional Materials · doi:10.1002/adfm.200400044 · Cited by 472
Superior Stable and Long Life Sodium Metal Anodes Achieved by Atomic Layer Deposition
Zhao, Y., Goncharova, L. V., Lushington, A., Sun, Q., Yadegari, H., Wang, B., Xiao, W., Li, R., & Sun, X. (2017) · Advanced Materials · doi:10.1002/adma.201606663 · Cited by 366
Self-citationSolid-State Lithium Metal Batteries Promoted by Nanotechnology: Progress and Prospects
Xin, S., You, Y., Wang, S., Gao, H.-C., Yin, Y.-X., & Guo, Y.-G. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00175 · Cited by 366
Hasegawa, S., Imanishi, N., Zhang, T., Xie, J., Hirano, A., Takeda, Y., & Yamamoto, O. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.08.009 · Cited by 322
Orsini, F., Du Pasquier, A., Beaudoin, B., Tarascon, J. M., Trentin, M., Langenhuizen, N., De Beer, E., & Notten, P. (1998) · Journal of Power Sources · doi:10.1016/s0378-7753(98)00128-1 · Cited by 310
McCloskey, B. D. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b01814 · Cited by 281
Safe and Durable High-Temperature Lithium–Sulfur Batteries via Molecular Layer Deposited Coating
Li, X., Lushington, A., Sun, Q., Xiao, W., Liu, J., Wang, B., Ye, Y., Nie, K., Hu, Y., Xiao, Q., et al. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b00577 · Cited by 185
Self-citationSolid state thin-film lithium battery systems
Dudney, N. J., & Neudecker, B. J. (1999) · Current Opinion in Solid State and Materials Science · doi:10.1016/s1359-0286(99)00052-2 · Cited by 140
Ionic conductivity of Li14Zn(GeO44 (Lisicon)
von Alpen, U., Bell, M. F., Wichelhaus, W., et al. (1978) · Electrochimica Acta · doi:10.1016/0013-4686(78)80023-1 · Cited by 104
Robust Metallic Lithium Anode Protection by the Molecular‐Layer‐Deposition Technique
Zhao, Y., Goncharova, L. V., Sun, Q., Li, X., Lushington, A., Wang, B., Li, R., Dai, F., Cai, M., & Sun, X. A. (2018) · Small Methods · doi:10.1002/smtd.201700417 · Cited by 104
Self-citationYamamoto, K., Iriyama, Y., Asaka, T., Hirayama, T., Fujita, H., Nonaka, K., Miyahara, K., Sugita, Y., & Ogumi, Z. (2012) · Electrochemistry Communications · doi:10.1016/j.elecom.2012.04.013 · Cited by 77
Lin, C., Kozen, A. C., Noked, M., Liu, C., & Rubloff, G. W. (2016) · Advanced Materials Interfaces · doi:10.1002/admi.201600426 · Cited by 76
Liu, J., Wang, B., Sun, Q., Li, R., Sham, T., & Sun, X. A. (2016) · Advanced Materials Interfaces · doi:10.1002/admi.201600468 · Cited by 30
Self-citation
Cited by
Lithium metal anodes: Present and future
Wang, R., Cui, W., Chu, F., & Wu, F. (2020) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2019.12.024 · Cited by 544
Liang, J.-Y., Zeng, X.-X., Zhang, X.-D., Zuo, T.-T., Yan, M., Yin, Y.-X., Shi, J.-L., Wu, X.-W., Guo, Y.-G., & Wan, L.-J. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.9b03517 · Cited by 404
Recent progress on solid-state hybrid electrolytes for solid-state lithium batteries
Liang, J., Luo, J., Sun, Q., Yang, X., Li, R., & Sun, X. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2019.06.021 · Cited by 365
Self-citation
Metadata
- Authors
- Liu, Y., Sun, Q., Zhao, Y., Wang, B., Kaghazchi, P., Adair, K. R., Li, R., Zhang, C., Liu, J., Kuo, L.-Y., Hu, Y., Sham, T.-K., Zhang, L., Yang, R., Lu, S., Song, X., & Sun, X.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-08-24
- Volume
- 10
- Issue
- 37
- Pages
- 31240-31248
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2888761391
- Cited by
- 312
- References
- 35
- FWCI
- 9.69
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.