The DOI matches its Crossref record; 43 of the 43 references it cites were found in a registry or an index.
Room-Temperature, Highly Durable Ti3C2Tx MXene/Graphene Hybrid Fibers for NH3 Gas Sensing
Abstract
Graphene-based fibers (GFs) have aroused enormous interest in portable, wearable electronics because of their excellent mechanical flexibility, electrical conductivity, and weavability, which make them advantageous for wearable electronic devices. Herein, we report the development of metal binder-free Ti 3 C 2 T x MXene/graphene hybrid fibers by a scalable wet-spinning process. These hybrid fibers exhibit excellent mechanical and electrical properties for applications in flexible wearable gas sensors. The synergistic effects of electronic properties and gas-adsorption capabilities of MXene/graphene allow the created fibers to show high NH 3 gas sensitivity at room temperature. The hybrid fibers exhibited significantly improved NH 3 sensing response (Δ R / R 0 = 6.77%) compared with individual MXene and graphene. The hybrid fibers also showed excellent mechanical flexibility with a minimal fluctuation of resistance of ±0.2% and low noise resistance even after bending over 2000 cycles, enabling gas sensing during deformation. Furthermore, flexible MXene/graphene hybrid fibers were woven into a lab coat, demonstrating their high potential for wearable devices. We envisage that these exciting features of 2D hybrid materials will provide a novel pathway for designing next-generation portable wearable gas sensors.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Two‐Dimensional Nanocrystals Produced by Exfoliation of Ti3AlC2
Naguib, M., Kurtoglu, M., Presser, V., Lu, J., Niu, J., Heon, M., Hultman, L., Gogotsi, Y., & Barsoum, M. W. (2011) · Advanced Materials · doi:10.1002/adma.201102306 · Cited by 11,855
Processable aqueous dispersions of graphene nanosheets
Li, D., Müller, M. B., Gilje, S., Kaner, R. B., & Wallace, G. G. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2007.451 · Cited by 9,114
2D materials and van der Waals heterostructures
Novoselov, K. S., Mishchenko, A., Carvalho, A., & Castro Neto, A. H. (2016) · Science · doi:10.1126/science.aac9439 · Cited by 7,434
Guidelines for Synthesis and Processing of Two-Dimensional Titanium Carbide (Ti3C2Tx MXene)
Alhabeb, M., Maleski, K., Anasori, B., Lelyukh, P., Clark, L., Sin, S., & Gogotsi, Y. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b02847 · Cited by 5,045
Raman Spectra of Graphite Oxide and Functionalized Graphene Sheets
Kudin, K. N., Ozbas, B., Schniepp, H. C., Prud'homme, R. K., Aksay, I. A., & Car, R. (2008) · Nano Letters · doi:10.1021/nl071822y · Cited by 4,475
Electronic Transport Properties of Individual Chemically Reduced Graphene Oxide Sheets
Gómez-Navarro, C., Weitz, R. T., Bittner, A. M., Scolari, M., Mews, A., Burghard, M., & Kern, K. (2007) · Nano Letters · doi:10.1021/nl072090c · Cited by 2,389
Metallic Ti3C2T x MXene Gas Sensors with Ultrahigh Signal-to-Noise Ratio
Kim, S. J., Koh, H.-J., Ren, C. E., Kwon, O., Maleski, K., Cho, S.-Y., Anasori, B., Kim, C.-K., Choi, Y.-K., Kim, J., et al. (2018) · ACS Nano · doi:10.1021/acsnano.7b07460 · Cited by 1,699
Dispersions of Two-Dimensional Titanium Carbide MXene in Organic Solvents
Maleski, K., Mochalin, V. N., & Gogotsi, Y. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b04830 · Cited by 1,033
Highly Conductive Optical Quality Solution‐Processed Films of 2D Titanium Carbide
Dillon, A. D., Ghidiu, M. J., Krick, A. L., Griggs, J., May, S. J., Gogotsi, Y., Barsoum, M. W., & Fafarman, A. T. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201600357 · Cited by 988
Facile Synthesis of Graphene Nanosheets via Fe Reduction of Exfoliated Graphite Oxide
Fan, Z.-J., Kai, W., Yan, J., Wei, T., Zhi, L.-J., Feng, J., Ren, Y.-M., Song, L.-P., & Wei, F. (2011) · ACS Nano · doi:10.1021/nn102339t · Cited by 886
Room Temperature Gas Sensing of Two-Dimensional Titanium Carbide (MXene)
Lee, E., VahidMohammadi, A., Prorok, B. C., Yoon, Y. S., Beidaghi, M., & Kim, D.-J. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b11055 · Cited by 878
Reduced graphene oxide for room-temperature gas sensors
Lu, G., Ocola, L. E., & Chen, J. (2009) · Nanotechnology · doi:10.1088/0957-4484/20/44/445502 · Cited by 775
Ultrahigh sensitivity and layer-dependent sensing performance of phosphorene-based gas sensors
Cui, S., Pu, H., Wells, S. A., Wen, Z., Mao, S., Chang, J., Hersam, M. C., & Chen, J. (2015) · Nature Communications · doi:10.1038/ncomms9632 · Cited by 763
Highly thermally conductive and mechanically strong graphene fibers
Xin, G., Yao, T., Sun, H., Scott, S. M., Shao, D., Wang, G., & Lian, J. (2015) · Science · doi:10.1126/science.aaa6502 · Cited by 740
Strong, Conductive, Lightweight, Neat Graphene Aerogel Fibers with Aligned Pores
Xu, Z., Zhang, Y., Li, P., & Gao, C. (2012) · ACS Nano · doi:10.1021/nn3021772 · Cited by 681
Shih, C.-J., Lin, S., Sharma, R., Strano, M. S., & Blankschtein, D. (2012) · Langmuir · doi:10.1021/la203607w · Cited by 605
Controlled, Stepwise Reduction and Band Gap Manipulation of Graphene Oxide
Mathkar, A., Tozier, D., Cox, P. J., Ong, P., Galande, C., Balakrishnan, K., Reddy, A. L. M., & Ajayan, P. M. (2012) · The Journal of Physical Chemistry Letters · doi:10.1021/jz300096t · Cited by 419
Gas detection using low-temperature reduced graphene oxide sheets
Lu, G., Ocola, L. E., & Chen, J. (2009) · Applied Physics Letters · doi:10.1063/1.3086896 · Cited by 418
ZnO decorated luminescent graphene as a potential gas sensor at room temperature
Singh, G., Choudhary, A., Haranath, D., Joshi, A. G., Singh, N., Singh, S., & Pasricha, R. (2012) · Carbon · doi:10.1016/j.carbon.2011.08.050 · Cited by 379
Lu, G., Park, S., Yu, K., Ruoff, R. S., Ocola, L. E., Rosenmann, D., & Chen, J. (2011) · ACS Nano · doi:10.1021/nn102803q · Cited by 378
Li, Y., Zhou, X., Wang, J., Deng, Q., Li, M., Du, S., Han, Y.-H., Lee, J., & Huang, Q. (2017) · RSC Advances · doi:10.1039/c7ra03402d · Cited by 378
High-Performance Multifunctional Graphene Yarns: Toward Wearable All-Carbon Energy Storage Textiles
Aboutalebi, S. H., Jalili, R., Esrafilzadeh, D., Salari, M., Gholamvand, Z., Aminorroaya Yamini, S., Konstantinov, K., Shepherd, R. L., Chen, J., Moulton, S. E., et al. (2014) · ACS Nano · doi:10.1021/nn406026z · Cited by 375
Ultrasonication-assisted ultrafast reduction of graphene oxide by zinc powder at room temperature
Mei, X., & Ouyang, J. (2011) · Carbon · doi:10.1016/j.carbon.2011.08.019 · Cited by 365
Liu, S., Yu, B., Zhang, H., Fei, T., & Zhang, T. (2014) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2014.05.086 · Cited by 364
Graphene-based hybrids for chemiresistive gas sensors
Meng, F.-L., Guo, Z., & Huang, X.-J. (2015) · TrAC Trends in Analytical Chemistry · doi:10.1016/j.trac.2015.02.008 · Cited by 337
Kubelka—Munk Theory and the Prediction of Reflectance
Nobbs, J. H. (1985) · Review of Progress in Coloration and Related Topics · doi:10.1111/j.1478-4408.1985.tb03737.x · Cited by 322
Chen, Y., Xie, X., Xin, X., Tang, Z.-R., & Xu, Y.-J. (2019) · ACS Nano · doi:10.1021/acsnano.8b06136 · Cited by 317
Highly selective gas sensor arrays based on thermally reduced graphene oxide
Lipatov, A., Varezhnikov, A., Wilson, P., Sysoev, V., Kolmakov, A., & Sinitskii, A. (2013) · Nanoscale · doi:10.1039/c3nr00747b · Cited by 307
Highly Electrically Conductive Ag‐Doped Graphene Fibers as Stretchable Conductors
Xu, Z., Liu, Z., Sun, H., & Gao, C. (2013) · Advanced Materials · doi:10.1002/adma.201300774 · Cited by 289
Russo, P. A., Donato, N., Leonardi, S. G., Baek, S., Conte, D. E., Neri, G., & Pinna, N. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201204373 · Cited by 282
Seyedin, S., Yanza, E. R. S., & Razal, J. M. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta08355f · Cited by 279
Role of oxygen functional groups in graphene oxide for reversible room-temperature NO2 sensing
Choi, Y. R., Yoon, Y.-G., Choi, K. S., Kang, J. H., Shim, Y.-S., Kim, Y. H., Chang, H. J., Lee, J.-H., Park, C. R., Kim, S. Y., et al. (2015) · Carbon · doi:10.1016/j.carbon.2015.04.082 · Cited by 233
Chemically Reduced Graphene Oxide for Ammonia Detection at Room Temperature
Ghosh, R., Midya, A., Santra, S., Ray, S. K., & Guha, P. K. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am4019109 · Cited by 213
Colloidal Stability of Graphene Oxide: Aggregation in Two Dimensions
Gudarzi, M. M. (2016) · Langmuir · doi:10.1021/acs.langmuir.6b01012 · Cited by 193
Reduced graphene oxide (rGO) decorated TiO2 microspheres for selective room-temperature gas sensors
Li, X., Zhao, Y., Wang, X., Wang, J., Gaskov, A. M., & Akbar, S. A. (2016) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2016.02.069 · Cited by 186
MoS2 graphene fiber based gas sensing devices
Niu, Y., Wang, R., Jiao, W., Ding, G., Hao, L., Yang, F., & He, X. (2015) · Carbon · doi:10.1016/j.carbon.2015.08.002 · Cited by 155
Dynamic assembly of liquid crystalline graphene oxide gel fibers for ion transport
Park, H., Lee, K. H., Kim, Y. B., Ambade, S. B., Noh, S. H., Eom, W., Hwang, J. Y., Lee, W. J., Huang, J., & Han, T. H. (2018) · Science Advances · doi:10.1126/sciadv.aau2104 · Cited by 131
Self-citationTextile‐Based Flexible Electroluminescent Devices
Hu, B., Li, D., Ala, O., Manandhar, P., Fan, Q., Kasilingam, D. P., & Calvert, P. (2010) · Advanced Functional Materials · doi:10.1002/adfm.201001110 · Cited by 127
Wang, Z., Han, T., Fei, T., Liu, S., & Zhang, T. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b15284 · Cited by 127
Self-citationBraissant, O. (2010) · Molecular Genetics and Metabolism · doi:10.1016/j.ymgme.2010.02.011 · Cited by 70
He, N., Pan, Q., Liu, Y., & Gao, W. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b05982 · Cited by 51
Water‐Resistant Perovskite Polygonal Microdisks Laser in Flexible Photonics Devices
Zhang, H., Liao, Q., Wang, X., Yao, J., & Fu, H. (2016) · Advanced Optical Materials · doi:10.1002/adom.201600335 · Cited by 38
Hajian, S., Khakbaz, P., Moshayedi, M., Maddipatla, D., Narakathu, B. B., Turkani, V. S., Bazuin, B. J., Pourfath, M., & Atashbar, M. Z. (2018) · Proceedings of IEEE Sensors/Proceedings of IEEE Sensors ... · doi:10.1109/icsens.2018.8589699 · Cited by 26
Cited by
Recent advances in energy-saving chemiresistive gas sensors: A review
Majhi, S. M., Mirzaei, A., Kim, H. W., Kim, S. S., & Kim, T. W. (2021) · Nano Energy · doi:10.1016/j.nanoen.2020.105369 · Cited by 653
Self-citationFlexible MXene‐Based Composites for Wearable Devices
Ma, C., Ma, M., Si, C., Ji, X., & Wan, P. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202009524 · Cited by 544
Sensing with MXenes: Progress and Prospects
Ho, D. H., Choi, Y. Y., Jo, S. B., Myoung, J., & Cho, J. H. (2021) · Advanced Materials · doi:10.1002/adma.202005846 · Cited by 482
MXenes and Their Applications in Wearable Sensors
Xin, M., Li, J., Ma, Z., Pan, L., & Shi, Y. (2020) · Frontiers in Chemistry · doi:10.3389/fchem.2020.00297 · Cited by 246
Chen, T.-W., Ramachandran, R., Chen, S.-M., Anushya, G., & Ramachandran, K. (2020) · Sensors · doi:10.3390/s20236755 · Cited by 37
Metadata
- Authors
- Lee, S. H., Eom, W., Shin, H., Ambade, R. B., Bang, J. H., Kim, H. W., & Han, T. H.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-02-10
- Volume
- 12
- Issue
- 9
- Pages
- 10434-10442
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W3006214174
- Cited by
- 435
- References
- 43
- FWCI
- 19.49
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
