Effect of Block Length and Stereocomplexation on the Thermally Processable Poly(ε-caprolactone) and Poly(Lactic acid) Block Copolymers for Biomedical Applications
The DOI matches its Crossref record; 40 of the 40 references it cites were found in a registry or an index.
Abstract
The current research concentrates on the synthesis of linear block copolymers with their backbone consisting of hard and soft segments, that is, poly(L-lactic acid) (PLLA)/ poly(D-lactic acid) (PDLA) and poly(ε-caprolactone) (PCL), with the detailed investigation of the effect of block length on the thermal, mechanical, and crystallization behavior followed by their processing and biocompatibility evaluation. In the current work, sequential ring opening polymerization has been employed wherein PCL is used as a macroinitiator for the synthesis of diblock (PCL-PDLA and PCL-PLLA) and stereotriblock copolymers (PCL-PLLA-PDLA) of targeted molecular weight, which is confirmed by 1 H NMR spectroscopy. The block length of PCL, in the case of diblock copolymer, is fixed; however, that of PLLA or PDLA is varied, and the enantiomeric blends thereof are made to achieve the merits of stereocomplexation. The length of the individual blocks is the same in the case of stereotriblock copolymer. The presence of two crystalline domains is manifested from differential scanning calorimetry and thermogravimertric analysis. An interesting improvement in the mechanical properties is observed upon increasing the block length of PDLA/PLLA in the block copolymer system which may be ascribed to the confined crystalliztion of PCL in the microdomain structure. Additionally, the synthesized materials are found to support the adhesion of MG-63 (human bone osteoscarcoma) cells as determined from in vitro studies indicating their potential in bone repair and regeneration. Further, the block copolymers possessing superior mechanical properties are thermally processed by injection molding to fabricate representative orthopedic fixation devices such as cancellous and cortical bone screws. Eventually, the thermo-mechanical stability of the cancellous bone screw made from the synthesized block copolymer is presented as compared to that made from the commercial PLA at the sterilization temperature of the biomedical devices.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Recent Developments in Ring Opening Polymerization of Lactones for Biomedical Applications
Albertsson, A.-C., & Varma, I. K. (2003) · Biomacromolecules · doi:10.1021/bm034247a · Cited by 1,582
Poly(lactide) Stereocomplexes: Formation, Structure, Properties, Degradation, and Applications
Tsuji, H. (2005) · Macromolecular Bioscience · doi:10.1002/mabi.200500062 · Cited by 1,366
Poly(lactide) Stereocomplexes: Formation, Structure, Properties, Degradation, and Applications
Tsuji, H. (2007) · Macromolecular Bioscience · doi:10.1002/mabi.200700275 · Cited by 1,021
Aliphatic Polyester Block Polymers: Renewable, Degradable, and Sustainable
Hillmyer, M. A., & Tolman, W. B. (2014) · Accounts of Chemical Research · doi:10.1021/ar500121d · Cited by 635
Dermal fillers in aesthetics: an overview of adverse events and treatment approaches
Pavicic, T., & Funt, D. (2013) · Clinical, Cosmetic and Investigational Dermatology · doi:10.2147/ccid.s50546 · Cited by 496
Mechanisms and Kinetics of Thermal Degradation of Poly(ε-caprolactone)
Persenaire, O., Alexandre, M., Degée, P., & Dubois, P. (2001) · Biomacromolecules · doi:10.1021/bm0056310 · Cited by 444
Aliphatic Polyester Block Polymer Design
Schneiderman, D. K., & Hillmyer, M. A. (2016) · Macromolecules · doi:10.1021/acs.macromol.6b00211 · Cited by 290
Crystalline Morphology of Electrospun Poly(ε-caprolactone) (PCL) Nanofibers
Wang, X., Zhao, H., Turng, L.-S., & Li, Q. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie302185e · Cited by 203
Preparation and Characterization of Biodegradable PLA/PCL Polymeric Blends
Matta, A. K., Rao, R. U., Suman, K. N. S., & Rambabu, V. (2014) · Procedia Materials Science · doi:10.1016/j.mspro.2014.07.201 · Cited by 173
Synthesis and Characterization of Poly(l-lactide)−Poly(ε-caprolactone) Multiblock Copolymers
Jeon, O., Lee, S.-H., Kim, S. H., Lee, Y. M., & Kim, Y. H. (2003) · Macromolecules · doi:10.1021/ma034006v · Cited by 168
Zhang, J., Duan, Y., Domb, A. J., & Ozaki, Y. (2010) · Macromolecules · doi:10.1021/ma100301h · Cited by 129
Huang, M., Li, S., Coudane, J., & Vert, M. (2003) · Macromolecular Chemistry and Physics · doi:10.1002/macp.200350054 · Cited by 120
Shuai, X., Porbeni, F. E., Wei, M., Shin, I. D., & Tonelli, A. E. (2001) · Macromolecules · doi:10.1021/ma0109626 · Cited by 103
Biodegradable Plastic Mulch Films for Sustainable Specialty Crop Production
Hayes, D. G., Anunciado, M. B., DeBruyn, J. M., Bandopadhyay, S., Schaeffer, S. M., English, M., Ghimire, S., Miles, C. A., Flury, M., & Sintim, H. Y. (2019) · Springer eBooks · doi:10.1007/978-3-030-19416-1_11 · Cited by 98
Gupta, A., & Katiyar, V. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b01059 · Cited by 95
Self-citationDesign of copolymer PLA-PCL electrospun matrix for biomedical applications
Pisani, S., Dorati, R., Conti, B., Modena, T., Bruni, G., & Genta, I. (2018) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2018.01.011 · Cited by 95
Polycaprolactone Thin-Film Micro- and Nanoporous Cell-Encapsulation Devices
Nyitray, C. E., Chang, R., Faleo, G., Lance, K. D., Bernards, D. A., Tang, Q., & Desai, T. A. (2015) · ACS Nano · doi:10.1021/acsnano.5b00679 · Cited by 93
Effect of Isotacticity on Formation of Mesomorphic Phase of Isotactic Polypropylene
Konishi, T., Nishida, K., Kanaya, T., & Kaji, K. (2005) · Macromolecules · doi:10.1021/ma050908f · Cited by 81
Enzymatic and Thermal Degradation of Poly(ε-caprolactone), Poly(d,l-lactide), and Their Blends
Sivalingam, G., Vijayalakshmi, S. P., & Madras, G. (2004) · Industrial & Engineering Chemistry Research · doi:10.1021/ie049589r · Cited by 76
Crystallization of semicrystalline block copolymers containing a glassy amorphous component
Shiomi, T., Tsukada, H., Takeshita, H., Takenaka, K., & Tezuka, Y. (2001) · Polymer · doi:10.1016/s0032-3861(00)00894-6 · Cited by 75
Goriparthi, B. K., Suman, K. N. S., & Rao, N. M. (2011) · Polymer Composites · doi:10.1002/pc.22145 · Cited by 72
Block–Stereoblock Copolymers of Poly(ϵ‐Caprolactone) and Poly(Lactic Acid)
Rosen, T., Goldberg, I., Navarra, W., Venditto, V., & Kol, M. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201803063 · Cited by 67
SAXS Studies on Structural Changes in a Poly(vinyl alcohol) Film during Uniaxial Stretching in Water
Miyazaki, T., Hoshiko, A., Akasaka, M., Shintani, T., & Sakurai, S. (2006) · Macromolecules · doi:10.1021/ma052595u · Cited by 65
Self-citationYang, J., Pan, H., Li, X., Sun, S., Zhang, H., & Dong, L. (2017) · RSC Adv. · doi:10.1039/c7ra07424g · Cited by 55
Han, L., Yu, C., Zhou, J., Shan, G., Bao, Y., Yun, X., Dong, T., & Pan, P. (2016) · Polymer · doi:10.1016/j.polymer.2016.09.073 · Cited by 53
Liu, Y., Dong, W.-S., Liu, J.-Y., & Li, Y.-S. (2014) · Dalton Trans. · doi:10.1039/c3dt52712c · Cited by 51
Lv, Q., Wu, D., Xie, H., Peng, S., Chen, Y., & Xu, C. (2016) · RSC Advances · doi:10.1039/c6ra07752h · Cited by 47
Bratton, D., Brown, M., & Howdle, S. M. (2005) · Macromolecules · doi:10.1021/ma0484072 · Cited by 44
Targeting Calcium Magnesium Silicates for Polycaprolactone/Ceramic Composite Scaffolds
Chen, C., Watkins‐Curry, P., Smoak, M. M., Hogan, K. J., Deese, S., McCandless, G. T., Chan, J. Y., & Hayes, D. J. (2014) · ACS Biomaterials Science & Engineering · doi:10.1021/ab500011x · Cited by 44
Masutani, K., Lee, C. W., & Kimura, Y. (2012) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201100683 · Cited by 40
Self-citationLamego, I., Duarte, I. F., Marques, M. P. M., et al. (2014) · Journal of Proteome Research · doi:10.1021/pr500907d · Cited by 40
Shirahama, H., Ichimaru, A., Tsutsumi, C., Nakayama, Y., & Yasuda, H. (2005) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.20516 · Cited by 36
Hirata, M., Masutani, K., & Kimura, Y. (2013) · Biomacromolecules · doi:10.1021/bm400228x · Cited by 34
Self-citationYin, G., Zhao, D., Wang, X., Ren, Y., Zhang, L., Wu, X., Nie, S., & Li, Q. (2015) · RSC Advances · doi:10.1039/c5ra15531b · Cited by 28
Wei, Z., Liu, L., Yu, F., Wang, P., Qu, C. Y., & Qi, M. (2008) · Polymer Bulletin · doi:10.1007/s00289-008-0964-0 · Cited by 27
Fu, M., Liu, Z., Bai, D., Ling, F., Bai, H., Zhang, Q., & Fu, Q. (2018) · Macromolecular Materials and Engineering · doi:10.1002/mame.201800178 · Cited by 19
Sterilization Protocol for Porous dental implants made by Selective Laser Melting
Manea, A., Bran, S., Băciuț, M. F., Armencea, G., Pop, D., Berce, P., Vodnar, D. C., Hedesiu, M. C., Dinu, C. M., Petrutiu, S. A., et al. (2018) · Medicine and Pharmacy Reports · doi:10.15386/cjmed-987 · Cited by 16
Solubility of Polycaprolactone in Supercritical Carbon Dioxide with Ethanol as Cosolvent
Rodríguez‐Rojo, S., Martín, Á., Calvo, E. S., et al. (2009) · Journal of Chemical & Engineering Data · doi:10.1021/je8007364 · Cited by 14
Novel block copolymers of 2-vinylpyridine and ɛ-caprolactone: Synthesis and characterization
Duivenvoorde, F. L., van Es, J. J. G. S., van Nostrum, C. F., & van der Linde, R. (2000) · Macromolecular Chemistry and Physics · doi:10.1002/(sici)1521-3935(20000301)201:6<662::aid-macp662>3.0.co;2-1 · Cited by 14
Srisuwan, Y., & Baimark, Y. (2018) · Heliyon · doi:10.1016/j.heliyon.2018.e01082 · Cited by 11
Research works printed but not linked: 1
- 10.1002/(SICI)1521-3935(20000301)201:6<733::AID-MACP733>3.0.CO;2-5 · DOI · Paper page
Cited by
Mulchandani, N., Masutani, K., Kumar, S., Yamane, H., Sakurai, S., Kimura, Y., & Katiyar, V. (2021) · Polymer Chemistry · doi:10.1039/d1py00429h · Cited by 49
Self-citationJing, Z., Huang, X., Liu, X., Liao, M., Zhang, Z., & Li, Y. (2022) · RSC Advances · doi:10.1039/d2ra00461e · Cited by 23
Chen, Y., Zhang, J., Zhang, Y., Cao, W., Liu, X., Bao, J., Zhang, X., & Chen, W. (2023) · Journal of Polymer Science · doi:10.1002/pol.20230425 · Cited by 9
Gong, L., Hu, Z., Chen, Y., Zhang, J., Cao, W., Liu, X., Chen, W., & Bao, J. (2025) · Journal of Polymer Science · doi:10.1002/pol.20250032 · Cited by 2
Metadata
- Authors
- Mulchandani, N., Gupta, A., Masutani, K., Kumar, S., Sakurai, S., Kimura, Y., & Katiyar, V.
- Affiliations
- Indian Institute of Technology Guwahati (IN)
- Kyoto Institute of Technology (JP)
- Corresponding author
- Katiyar, Vimal
- ORCID
- Venue
- ACS Applied Polymer Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-10-30
- Volume
- 1
- Issue
- 12
- Pages
- 3354-3365
- ISSN
- 2637-6105 (ISSN-L)
- OpenAlex
- W2982557428
- Cited by
- 28
- References
- 40
- Citations by year
- 2026: 4 · 2025: 6 · 2024: 3 · 2023: 6 · 2022: 4 · 2021: 4 · 2020: 1
- FWCI
- 0.64
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- ACS Applied Polymer Materials (publishedVersion)
- Funders
- Department of Science and Technology, Ministry of Science and Technology (IF 160861)
- Department of Chemicals and Petrochemicals, Ministry of Chemicals and Fertilizers
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Engineering › Biomedical Engineering › Bone Tissue Engineering Materials
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Keywords
- polycaprolactone, poly(L-lactic acid), poly(D-lactide), block copolymers, stereocomplexation, block length, macroinitiator, crystallization behavior, mechanical properties, biocompatibility, bone cell adhesion, bone regeneration, orthopedic fixation devices, bone screws, injection molding, thermal stability, sterilization, thermomechanical stability
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.