CoChat

Silk fibroin as a bioink—a thematic review of functionalization strategies for bioprinting applications

Tan, Xuan Hao, Liu, Ling, Mitryashkin, Alexander, Wang, Yunyun, Goh, James Cho Hong · 2022 · ACS Biomaterials Science & Engineering

The DOI matches its Crossref record; 194 of the 194 references it cites were found in a registry or an index.

Abstract

Bioprinting is an emerging tissue engineering technique that has attracted the attention of researchers around the world, for its ability to create tissue constructs that recapitulate physiological function. While the technique has been receiving hype, there are still limitations to the use of bioprinting in practical applications, much of which is due to inappropriate bioink design that is unable to recapitulate complex tissue architecture. Silk fibroin (SF) is an exciting and promising bioink candidate that has been increasingly popular in bioprinting applications because of its processability, biodegradability, and biocompatibility properties. However, due to its lack of optimum gelation properties, functionalization strategies need to be employed so that SF can be effectively used in bioprinting applications. These functionalization strategies are processing methods which allow SF to be compatible with specific bioprinting techniques. Previous literature reviews of SF as a bioink mainly focus on discussing different methods to functionalize SF as a bioink, while a comprehensive review on categorizing SF functional methods according to their potential applications is missing. This paper seeks to discuss and compartmentalize the different strategies used to functionalize SF for bioprinting and categorize the strategies for each bioprinting method (namely, inkjet, extrusion, and light-based bioprinting). By compartmentalizing the various strategies for each printing method, the paper illustrates how each strategy is better suited for a target tissue application. The paper will also discuss applications of SF bioinks in regenerating various tissue types and the challenges and future trends that SF can take in its role as a bioink material.

Overview

Integrity signals

Registry

Crossref · 10.1021/acsbiomaterials.2c00313

Cites

194 of 194 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Show all 194 references

Research works printed but not linked: 7

  1. He Y., 2020, Bio-Design and Manufacturing, 4
  2. 10.3969/j.issn.2095-4344.2281 · doi:10.3969/j.issn.2095-4344.2281
  3. Lee H., 2020, Noncytotoxic Biocomposite hydrogel fabricated by digital light processing 3D printing
  4. 10.1007/978-981-15-3258-0_4 · DOI
  5. Neural Tissue Engineering: Strategies for Repair and Regeneration | Annual Review of Biomedical Engineering. https://www-annualreviews-org.libproxy1.nus.edu.sg/doi/10.1146/annurev.bioeng.5.011303.120731?url_ver=Z39.88-2003&rfr_id=ori%3Arid%3Acrossref.org&rfr_dat=cr_pub++0pubmed (accessed May 20, 2021). · DOI · Paper page
  6. 10.1089/ten.tec.2013.0278 · DOI
  7. 10.3969/j.issn.0258-8021.2020.02.10 · doi:10.3969/j.issn.0258-8021.2020.02.10

Cited by

Metadata

Authors
Tan, X. H., Liu, L., Mitryashkin, A., Wang, Y., & Goh, J. C. H.
Affiliations
National University of Singapore (SG)
Corresponding author
  • Tan, Xuan Hao
  • Goh, James Cho Hong
Venue
ACS Biomaterials Science & Engineering
Published
2022-07-05
Volume
8
Issue
8
Pages
3242-3270
ISSN
2373-9878 (ISSN-L)
OpenAlex
W4283807817
Cited by
36
References
194
Citations by year
2026: 5 · 2025: 6 · 2024: 16 · 2023: 7 · 2022: 2
FWCI
0.69
Type
journal article
Language
en
Open access
closed
Locations
  • ACS Biomaterials Science & Engineering (publishedVersion)
  • PubMed (publishedVersion)
Topics
  • Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
  • Physical Sciences › Materials Science › Biomaterials › Silk-based biomaterials and applications
  • Physical Sciences › Materials Science › Biomaterials › Electrospun Nanofibers in Biomedical Applications
Keywords
silk fibroin, bioinks, bioprinting, functionalization strategies, inkjet bioprinting, extrusion-based bioprinting, gelation properties, tissue regeneration, tissue engineering scaffolds
MeSH terms
Animals, Fibroins, Bombyx, Tissue Engineering, Tissue Scaffolds, Bioprinting, Printing, Three-Dimensional

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.