The DOI matches its Crossref record; 43 of the 43 references it cites were found in a registry or an index.
A Highly Reversible Room-Temperature Sodium Metal Anode
Open accessAbstract
Owing to its low cost and high natural abundance, sodium metal is among the most promising anode materials for energy storage technologies beyond lithium ion batteries. However, room-temperature sodium metal anodes suffer from poor reversibility during long-term plating and stripping, mainly due to formation of nonuniform solid electrolyte interphase as well as dendritic growth of sodium metal. Herein we report for the first time that a simple liquid electrolyte, sodium hexafluorophosphate in glymes (mono-, di-, and tetraglyme), can enable highly reversible and nondendritic plating-stripping of sodium metal anodes at room temperature. High average Coulombic efficiencies of 99.9% were achieved over 300 plating-stripping cycles at 0.5 mA cm(-2). The long-term reversibility was found to arise from the formation of a uniform, inorganic solid electrolyte interphase made of sodium oxide and sodium fluoride, which is highly impermeable to electrolyte solvent and conducive to nondendritic growth. As a proof of concept, we also demonstrate a room-temperature sodium-sulfur battery using this class of electrolytes, paving the way for the development of next-generation, sodium-based energy storage technologies.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Armand, M., & Tarascon, J.-M. (2008) · Nature · doi:10.1038/451652a · Cited by 19,612
The Li-Ion Rechargeable Battery: A Perspective
Goodenough, J. B., & Park, K.-S. (2013) · Journal of the American Chemical Society · doi:10.1021/ja3091438 · Cited by 9,962
Research Development on Sodium-Ion Batteries
Yabuuchi, N., Kubota, K., Dahbi, M., & Komaba, S. (2014) · Chemical Reviews · doi:10.1021/cr500192f · Cited by 6,478
Electrolytes and Interphases in Li-Ion Batteries and Beyond
Xu, K. (2014) · Chemical Reviews · doi:10.1021/cr500003w · Cited by 5,566
Lithium metal anodes for rechargeable batteries
Xu, W., Wang, J., Ding, F., Chen, X., Nasybulin, E., Zhang, Y., & Zhang, J.-G. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee40795k · Cited by 4,704
Slater, M. D., Kim, D., Lee, E., & Johnson, C. S. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201200691 · Cited by 4,518
Kim, S., Seo, D., Ma, X., Ceder, G., & Kang, K. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200026 · Cited by 3,370
Room-temperature stationary sodium-ion batteries for large-scale electric energy storage
Pan, H., Hu, Y.-S., & Chen, L. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40847g · Cited by 3,319
Nanocomposite polymer electrolytes for lithium batteries
Croce, F., Appetecchi, G. B., Persi, L., & Scrosati, B. (1998) · Nature · doi:10.1038/28818 · Cited by 3,205
A review of the features and analyses of the solid electrolyte interphase in Li-ion batteries
Verma, P., Maire, P., & Novák, P. (2010) · Electrochimica Acta · doi:10.1016/j.electacta.2010.05.072 · Cited by 2,903
Peled, E. (1979) · Journal of The Electrochemical Society · doi:10.1149/1.2128859 · Cited by 2,899
High rate and stable cycling of lithium metal anode
Qian, J., Henderson, W. A., Xu, W., Bhattacharya, P., Engelhard, M., Borodin, O., & Zhang, J.-G. (2015) · Nature Communications · doi:10.1038/ncomms7362 · Cited by 2,561
A new class of Solvent-in-Salt electrolyte for high-energy rechargeable metallic lithium batteries
Suo, L., Hu, Y.-S., Li, H., Armand, M., & Chen, L. (2013) · Nature Communications · doi:10.1038/ncomms2513 · Cited by 2,314
Aurbach, D. (2000) · Journal of Power Sources · doi:10.1016/s0378-7753(00)00431-6 · Cited by 2,130
Electrical Energy Storage and Intercalation Chemistry
Whittingham, M. S. (1976) · Science · doi:10.1126/science.192.4244.1126 · Cited by 1,919
Interconnected hollow carbon nanospheres for stable lithium metal anodes
Zheng, G., Lee, S. W., Liang, Z., Lee, H.-W., Yan, K., Yao, H., Wang, H., Li, W., Chu, S., & Cui, Y. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.152 · Cited by 1,764
Self-citationThe Impact of Elastic Deformation on Deposition Kinetics at Lithium/Polymer Interfaces
Monroe, C., & Newman, J. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1850854 · Cited by 1,701
Aurbach, D. (2002) · Solid State Ionics · doi:10.1016/s0167-2738(02)00080-2 · Cited by 1,697
Stable lithium electrodeposition in liquid and nanoporous solid electrolytes
Lu, Y., Tu, Z., & Archer, L. A. (2014) · Nature Materials · doi:10.1038/nmat4041 · Cited by 1,592
In search of an optimized electrolyte for Na-ion batteries
Ponrouch, A., Marchante, E., Courty, M., Tarascon, J.-M., & Palacín, M. R. (2012) · Energy & Environmental Science · doi:10.1039/c2ee22258b · Cited by 968
Jache, B., & Adelhelm, P. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201403734 · Cited by 963
Understanding the Anchoring Effect of Two-Dimensional Layered Materials for Lithium–Sulfur Batteries
Zhang, Q., Wang, Y., Seh, Z. W., Fu, Z., Zhang, R., & Cui, Y. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b00367 · Cited by 931
Self-citationA rechargeable room-temperature sodium superoxide (NaO2) battery
Hartmann, P., Bender, C. L., Vračar, M., Dürr, A. K., Garsuch, A., Janek, J., & Adelhelm, P. (2013) · Nature Materials · doi:10.1038/nmat3486 · Cited by 786
High temperature sodium batteries: status, challenges and future trends
Hueso, K. B., Armand, M., & Rojo, T. (2013) · Energy & Environmental Science · doi:10.1039/c3ee24086j · Cited by 774
Fluorinated Ethylene Carbonate as Electrolyte Additive for Rechargeable Na Batteries
Komaba, S., Ishikawa, T., Yabuuchi, N., Murata, W., Ito, A., & Ohsawa, Y. (2011) · ACS Applied Materials & Interfaces · doi:10.1021/am200973k · Cited by 713
A High‐Energy Room‐Temperature Sodium‐Sulfur Battery
Xin, S., Yin, Y., Guo, Y., & Wan, L. (2014) · Advanced Materials · doi:10.1002/adma.201304126 · Cited by 632
Seh, Z. W., Yu, J. H., Li, W., Hsu, P.-C., Wang, H., Sun, Y., Yao, H., Zhang, Q., & Cui, Y. (2014) · Nature Communications · doi:10.1038/ncomms6017 · Cited by 600
Self-citationRyou, M., Lee, D. J., Lee, J., Lee, Y. M., Park, J., & Choi, J. W. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201100687 · Cited by 473
Hwang, T. H., Jung, D. S., Kim, J.-S., Kim, B. G., & Choi, J. W. (2013) · Nano Letters · doi:10.1021/nl402513x · Cited by 441
A Thermally Conductive Separator for Stable Li Metal Anodes
Luo, W., Zhou, L., Fu, K., Yang, Z., Wan, J., Manno, M., Yao, Y., Zhu, H., Yang, B., & Hu, L. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b02432 · Cited by 356
Ambient Temperature Sodium–Sulfur Batteries
Manthiram, A., & Yu, X. (2015) · Small · doi:10.1002/smll.201403257 · Cited by 344
A Highly Reversible Lithium Metal Anode
Park, M. S., Ma, S. B., Lee, D. J., Im, D., Doo, S.-G., & Yamamoto, O. (2014) · Scientific Reports · doi:10.1038/srep03815 · Cited by 339
The critical role of phase-transfer catalysis in aprotic sodium oxygen batteries
Xia, C., Black, R., Fernandes, R., Adams, B., & Nazar, L. F. (2015) · Nature Chemistry · doi:10.1038/nchem.2260 · Cited by 298
Bhide, A., Hofmann, J., Katharina Dürr, A., Janek, J., & Adelhelm, P. (2014) · Phys. Chem. Chem. Phys. · doi:10.1039/c3cp53077a · Cited by 275
Ryu, H., Kim, T., Kim, K., Ahn, J.-H., Nam, T., Wang, G., & Ahn, H.-J. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.01.109 · Cited by 192
Yu, X., & Manthiram, A. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500350 · Cited by 172
Liu, W., Sun, Q., Yang, Y., Xie, J.-Y., & Fu, Z.-W. (2013) · Chemical Communications · doi:10.1039/c3cc00085k · Cited by 158
A Sulfur Cathode with Pomegranate‐Like Cluster Structure
Li, W., Liang, Z., Lu, Z., Yao, H., Seh, Z. W., Yan, K., Zheng, G. W., & Cui, Y. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500211 · Cited by 131
Self-citationHigh-capacity Li2S–graphene oxide composite cathodes with stable cycling performance
Seh, Z. W., Wang, H., Liu, N., Zheng, G. W., Li, W., Yao, H., & Cui, Y. (2013) · Chemical Science · doi:10.1039/c3sc52789a · Cited by 116
Self-citationRechargeable Lithium and Sodium Anodes in Chloroaluminate Molten Salts Containing Thionyl Chloride
Fuller, J., Osteryoung, R. A., & Carlin, R. T. (1995) · Journal of The Electrochemical Society · doi:10.1149/1.2048390 · Cited by 69
Piersma, B. J., Ryan, D. M., Schumacher, E. R., & Riechel, T. L. (1996) · Journal of The Electrochemical Society · doi:10.1149/1.1836557 · Cited by 55
Kim, J., Yoo, D., Min, J., Shakoor, R. A., Kahraman, R., & Choi, J. W. (2015) · ChemNanoMat · doi:10.1002/cnma.201500055 · Cited by 54
Stability of Sodium Electrodeposited from a Room Temperature Chloroaluminate Molten Salt
Gray, G. E., Kohl, P. A., & Winnick, J. (1995) · Journal of The Electrochemical Society · doi:10.1149/1.2048391 · Cited by 41
Cited by
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Cheng, X.-B., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00115 · Cited by 6,197
Designing high-energy lithium–sulfur batteries
Seh, Z. W., Sun, Y., Zhang, Q., & Cui, Y. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00410a · Cited by 2,573
Self-citationRechargeable Batteries for Grid Scale Energy Storage
Zhu, Z., Jiang, T., Ali, M., Meng, Y., Jin, Y., Cui, Y., & Chen, W. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00289 · Cited by 1,769
Self-citationDesign principles for electrolytes and interfaces for stable lithium-metal batteries
Tikekar, M. D., Choudhury, S., Tu, Z., & Archer, L. A. (2016) · Nature Energy · doi:10.1038/nenergy.2016.114 · Cited by 1,765
Sodium Metal Anodes: Emerging Solutions to Dendrite Growth
Lee, B., Paek, E., Mitlin, D., & Lee, S. W. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00642 · Cited by 940
Metadata
- Authors
- Seh, Z. W., Sun, J., Sun, Y., & Cui, Y.
- Venue
- ACS Central Science
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-11-02
- Volume
- 1
- Issue
- 8
- Pages
- 449-455
- ISSN
- 2374-7943 (ISSN-L)
- 2374-7951
- OpenAlex
- W2341894171
- Cited by
- 979
- References
- 43
- FWCI
- 25.34
- Type
- journal article
- Language
- en
- Open access
- diamond
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.