The DOI matches its Crossref record; 43 of the 43 references it cites were found in a registry or an index.
A Highly Reversible Room-Temperature Sodium Metal Anode
Open accessAbstract
Owing to its low cost and high natural abundance, sodium metal is among the most promising anode materials for energy storage technologies beyond lithium ion batteries. However, room-temperature sodium metal anodes suffer from poor reversibility during long-term plating and stripping, mainly due to formation of nonuniform solid electrolyte interphase as well as dendritic growth of sodium metal. Herein we report for the first time that a simple liquid electrolyte, sodium hexafluorophosphate in glymes (mono-, di-, and tetraglyme), can enable highly reversible and nondendritic plating-stripping of sodium metal anodes at room temperature. High average Coulombic efficiencies of 99.9% were achieved over 300 plating-stripping cycles at 0.5 mA cm(-2). The long-term reversibility was found to arise from the formation of a uniform, inorganic solid electrolyte interphase made of sodium oxide and sodium fluoride, which is highly impermeable to electrolyte solvent and conducive to nondendritic growth. As a proof of concept, we also demonstrate a room-temperature sodium-sulfur battery using this class of electrolytes, paving the way for the development of next-generation, sodium-based energy storage technologies.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Armand, M., & Tarascon, J.-M. (2008) · Nature · doi:10.1038/451652a · Cited by 19,612
The Li-Ion Rechargeable Battery: A Perspective
Goodenough, J. B., & Park, K.-S. (2013) · Journal of the American Chemical Society · doi:10.1021/ja3091438 · Cited by 9,962
Research Development on Sodium-Ion Batteries
Yabuuchi, N., Kubota, K., Dahbi, M., & Komaba, S. (2014) · Chemical Reviews · doi:10.1021/cr500192f · Cited by 6,478
Electrolytes and Interphases in Li-Ion Batteries and Beyond
Xu, K. (2014) · Chemical Reviews · doi:10.1021/cr500003w · Cited by 5,566
Lithium metal anodes for rechargeable batteries
Xu, W., Wang, J., Ding, F., Chen, X., Nasybulin, E., Zhang, Y., & Zhang, J.-G. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee40795k · Cited by 4,704
Slater, M. D., Kim, D., Lee, E., & Johnson, C. S. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201200691 · Cited by 4,518
Kim, S., Seo, D., Ma, X., Ceder, G., & Kang, K. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200026 · Cited by 3,370
Room-temperature stationary sodium-ion batteries for large-scale electric energy storage
Pan, H., Hu, Y.-S., & Chen, L. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40847g · Cited by 3,319
Nanocomposite polymer electrolytes for lithium batteries
Croce, F., Appetecchi, G. B., Persi, L., & Scrosati, B. (1998) · Nature · doi:10.1038/28818 · Cited by 3,205
A review of the features and analyses of the solid electrolyte interphase in Li-ion batteries
Verma, P., Maire, P., & Novák, P. (2010) · Electrochimica Acta · doi:10.1016/j.electacta.2010.05.072 · Cited by 2,903
Cited by
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Cheng, X.-B., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00115 · Cited by 6,197
Designing high-energy lithium–sulfur batteries
Seh, Z. W., Sun, Y., Zhang, Q., & Cui, Y. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00410a · Cited by 2,573
Self-citationRechargeable Batteries for Grid Scale Energy Storage
Zhu, Z., Jiang, T., Ali, M., Meng, Y., Jin, Y., Cui, Y., & Chen, W. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00289 · Cited by 1,769
Self-citationDesign principles for electrolytes and interfaces for stable lithium-metal batteries
Tikekar, M. D., Choudhury, S., Tu, Z., & Archer, L. A. (2016) · Nature Energy · doi:10.1038/nenergy.2016.114 · Cited by 1,765
Sodium Metal Anodes: Emerging Solutions to Dendrite Growth
Lee, B., Paek, E., Mitlin, D., & Lee, S. W. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00642 · Cited by 940
Zhao, C., Liu, L., Qi, X., Lu, Y., Wu, F., Zhao, J., Yu, Y., Hu, Y., & Chen, L. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703012 · Cited by 738
Liu, W., Liu, P., & Mitlin, D. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202002297 · Cited by 687
Electrolyte design strategies and research progress for room-temperature sodium-ion batteries
Che, H., Chen, S., Xie, Y., Wang, H., Amine, K., Liao, X.-Z., & Ma, Z.-F. (2017) · Energy & Environmental Science · doi:10.1039/c7ee00524e · Cited by 676
Stabilizing metal battery anodes through the design of solid electrolyte interphases
Zhao, Q., Stalin, S., & Archer, L. A. (2021) · Joule · doi:10.1016/j.joule.2021.03.024 · Cited by 629
A stable room-temperature sodium–sulfur battery
Wei, S., Xu, S., Agrawral, A., Choudhury, S., Lu, Y., Tu, Z., Ma, L., & Archer, L. A. (2016) · Nature Communications · doi:10.1038/ncomms11722 · Cited by 589
Extremely Stable Sodium Metal Batteries Enabled by Localized High-Concentration Electrolytes
Zheng, J., Chen, S., Zhao, W., Song, J., Engelhard, M. H., & Zhang, J.-G. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.7b01213 · Cited by 579
A room-temperature sodium–sulfur battery with high capacity and stable cycling performance
Xu, X., Zhou, D., Qin, X., Lin, K., Kang, F., Li, B., Shanmukaraj, D., Rojo, T., Armand, M., & Wang, G. (2018) · Nature Communications · doi:10.1038/s41467-018-06443-3 · Cited by 563
Carbon-Based Fibers for Advanced Electrochemical Energy Storage Devices
Chen, S., Qiu, L., & Cheng, H.-M. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00466 · Cited by 555
Anode‐Free Full Cells: A Pathway to High‐Energy Density Lithium‐Metal Batteries
Nanda, S., Gupta, A., & Manthiram, A. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202000804 · Cited by 537
Recent developments and insights into the understanding of Na metal anodes for Na-metal batteries
Zhao, Y., Adair, K. R., & Sun, X. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01373j · Cited by 533
Zheng, J., Lochala, J. A., Kwok, A., Deng, Z. D., & Xiao, J. (2017) · Advanced Science · doi:10.1002/advs.201700032 · Cited by 524
Zhang, J., Wang, D.-W., Lv, W., Zhang, S., Liang, Q., Zheng, D., Kang, F., & Yang, Q.-H. (2017) · Energy & Environmental Science · doi:10.1039/c6ee03367a · Cited by 508
Xiao, N., McCulloch, W. D., & Wu, Y. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b04945 · Cited by 483
Interfacial engineering to achieve an energy density of over 200 Wh kg−1 in sodium batteries
Li, Y., Zhou, Q., Weng, S., Ding, F., Qi, X., Lu, J., Li, Y., Zhang, X., Rong, X., Lu, Y., et al. (2022) · Nature Energy · doi:10.1038/s41560-022-01033-6 · Cited by 471
Eshetu, G. G., Elia, G. A., Armand, M., Forsyth, M., Komaba, S., Rojo, T., & Passerini, S. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202000093 · Cited by 470
Zheng, J., Kim, M. S., Tu, Z., Choudhury, S., Tang, T., & Archer, L. A. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00883g · Cited by 466
Design strategies for nonaqueous multivalent-ion and monovalent-ion battery anodes
Li, M., Lu, J., Ji, X., Li, Y., Shao, Y., Chen, Z., Zhong, C., & Amine, K. (2020) · Nature Reviews Materials · doi:10.1038/s41578-019-0166-4 · Cited by 438
Dendrite‐Free Sodium‐Metal Anodes for High‐Energy Sodium‐Metal Batteries
Sun, B., Li, P., Zhang, J., Wang, D., Munroe, P., Wang, C., Notten, P. H. L., & Wang, G. (2018) · Advanced Materials · doi:10.1002/adma.201801334 · Cited by 416
Designing solid-liquid interphases for sodium batteries
Choudhury, S., Wei, S., Ozhabes, Y., Gunceler, D., Zachman, M. J., Tu, Z., Shin, J. H., Nath, P., Agrawal, A., Kourkoutis, L. F., et al. (2017) · Nature Communications · doi:10.1038/s41467-017-00742-x · Cited by 410
Sodium-ion battery anodes: Status and future trends
Zhang, W., Zhang, F., Ming, F., & Alshareef, H. N. (2019) · EnergyChem · doi:10.1016/j.enchem.2019.100012 · Cited by 407
Interphases in Sodium‐Ion Batteries
Song, J., Xiao, B., Lin, Y., Xu, K., & Li, X. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703082 · Cited by 389
Ultrathin Surface Coating Enables the Stable Sodium Metal Anode
Luo, W., Lin, C., Zhao, O., Noked, M., Zhang, Y., Rubloff, G. W., & Hu, L. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601526 · Cited by 380
Critical effects of electrolyte recipes for Li and Na metal batteries
Zheng, X., Huang, L., Ye, X., Zhang, J., Min, F., Luo, W., & Huang, Y. (2021) · Chem · doi:10.1016/j.chempr.2021.02.025 · Cited by 367
Superior Stable and Long Life Sodium Metal Anodes Achieved by Atomic Layer Deposition
Zhao, Y., Goncharova, L. V., Lushington, A., Sun, Q., Yadegari, H., Wang, B., Xiao, W., Li, R., & Sun, X. (2017) · Advanced Materials · doi:10.1002/adma.201606663 · Cited by 366
Emerging Chemistry for Wide-Temperature Sodium-Ion Batteries
Zhang, F., He, B., Xin, Y., Zhu, T., Zhang, Y., Wang, S., Li, W., Yang, Y., & Tian, H. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00728 · Cited by 357
Designable ultra-smooth ultra-thin solid-electrolyte interphases of three alkali metal anodes
Gu, Y., Wang, W.-W., Li, Y.-J., Wu, Q.-H., Tang, S., Yan, J.-W., Zheng, M.-S., Wu, D.-Y., Fan, C.-H., Hu, W.-Q., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-03466-8 · Cited by 355
Design Strategies to Enable the Efficient Use of Sodium Metal Anodes in High‐Energy Batteries
Sun, B., Xiong, P., Maitra, U., Langsdorf, D., Yan, K., Wang, C., Janek, J., Schröder, D., & Wang, G. (2020) · Advanced Materials · doi:10.1002/adma.201903891 · Cited by 355
Solid Electrolyte Interphases on Sodium Metal Anodes
Bao, C., Wang, B., Liu, P., Wu, H., Zhou, Y., Wang, D., Liu, H., & Dou, S. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202004891 · Cited by 354
Luo, J., Wang, C., Wang, H., Hu, X., Matios, E., Lu, X., Zhang, W., Tao, X., & Li, W. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201805946 · Cited by 352
Wang, Y., Zhang, B., Lai, W., Xu, Y., Chou, S., Liu, H., & Dou, S. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602829 · Cited by 349
Porous Al Current Collector for Dendrite-Free Na Metal Anodes
Liu, S., Tang, S., Zhang, X., Wang, A., Yang, Q.-H., & Luo, J. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b03185 · Cited by 336
Advances in Composite Polymer Electrolytes for Lithium Batteries and Beyond
Tang, S., Guo, W., & Fu, Y. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202000802 · Cited by 335
Alkali-Metal Anodes: From Lab to Market
Xiang, J., Yang, L., Yuan, L., Yuan, K., Zhang, Y., Huang, Y., Lin, J., Pan, F., & Huang, Y. (2019) · Joule · doi:10.1016/j.joule.2019.07.027 · Cited by 333
Lei, D., He, Y.-B., Huang, H., Yuan, Y., Zhong, G., Zhao, Q., Hao, X., Zhang, D., Lai, C., Zhang, S., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-11960-w · Cited by 332
The Role of Hydrothermal Carbonization in Sustainable Sodium‐Ion Battery Anodes
Xu, Z., Wang, J., Guo, Z., Xie, F., Liu, H., Yadegari, H., Tebyetekerwa, M., Ryan, M. P., Hu, Y., & Titirici, M. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202200208 · Cited by 328
Zheng, X., Bommier, C., Luo, W., Jiang, L., Hao, Y., & Huang, Y. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2018.04.014 · Cited by 321
Electrode potential influences the reversibility of lithium-metal anodes
Ko, S., Obukata, T., Shimada, T., Takenaka, N., Nakayama, M., Yamada, A., & Yamada, Y. (2022) · Nature Energy · doi:10.1038/s41560-022-01144-0 · Cited by 319
Hao, H., Hutter, T., Boyce, B. L., Watt, J., Liu, P., & Mitlin, D. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00838 · Cited by 314
Challenges of today for Na-based batteries of the future: From materials to cell metrics
Hasa, I., Mariyappan, S., Saurel, D., Adelhelm, P., Koposov, A. Y., Masquelier, C., Croguennec, L., & Casas-Cabanas, M. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228872 · Cited by 305
Huang, J., Wu, K., Xu, G., Wu, M., Dou, S., & Wu, C. (2023) · Chemical Society Reviews · doi:10.1039/d2cs01029a · Cited by 304
Xiong, P., Bai, P., Li, A., Li, B., Cheng, M., Chen, Y., Huang, S., Jiang, Q., Bu, X., & Xu, Y. (2019) · Advanced Materials · doi:10.1002/adma.201904771 · Cited by 302
Ether‐Based Electrolyte Chemistry Towards High‐Voltage and Long‐Life Na‐Ion Full Batteries
Liang, H., Gu, Z., Zhao, X., Guo, J., Yang, J., Li, W., Li, B., Liu, Z., Li, W., & Wu, X. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202112550 · Cited by 301
Ion–Solvent Complexes Promote Gas Evolution from Electrolytes on a Sodium Metal Anode
Chen, X., Shen, X., Li, B., Peng, H., Cheng, X., Li, B., Zhang, X., Huang, J., & Zhang, Q. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201711552 · Cited by 287
Luo, W., Zhang, Y., Xu, S., Dai, J., Hitz, E., Li, Y., Yang, C., Chen, C., Liu, B., & Hu, L. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b01138 · Cited by 285
Can Li-Ion batteries be the panacea for automotive applications?
Opitz, A., Badami, P., Shen, L., Vignarooban, K., & Kannan, A. M. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.10.019 · Cited by 284
Inorganic–Organic Coating via Molecular Layer Deposition Enables Long Life Sodium Metal Anode
Zhao, Y., Goncharova, L. V., Zhang, Q., Kaghazchi, P., Sun, Q., Lushington, A., Wang, B., Li, R., & Sun, X. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b02464 · Cited by 284
Electroless Formation of a Fluorinated Li/Na Hybrid Interphase for Robust Lithium Anodes
Wang, Y., Liu, F., Fan, G., Qiu, X., Liu, J., Yan, Z., Zhang, K., Cheng, F., & Chen, J. (2021) · Journal of the American Chemical Society · doi:10.1021/jacs.0c12051 · Cited by 283
Lee, J., Lee, Y., Lee, J., Lee, S.-M., Choi, J.-H., Kim, H., Kwon, M.-S., Kang, K., Lee, K. T., & Choi, N.-S. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b14878 · Cited by 273
Highly Stable Sodium Batteries Enabled by Functional Ionic Polymer Membranes
Wei, S., Choudhury, S., Xu, J., Nath, P., Tu, Z., & Archer, L. A. (2017) · Advanced Materials · doi:10.1002/adma.201605512 · Cited by 267
Alkali Metal Anodes for Rechargeable Batteries
Wang, H., Yu, D., Kuang, C., Cheng, L., Li, W., Feng, X., Zhang, Z., Zhang, X., & Zhang, Y. (2019) · Chem · doi:10.1016/j.chempr.2018.11.005 · Cited by 266
Knocking down the kinetic barriers towards fast-charging and low-temperature sodium metal batteries
Zheng, X., Gu, Z., Fu, J., Wang, H., Ye, X., Huang, L., Liu, X., Wu, X., Luo, W., & Huang, Y. (2021) · Energy & Environmental Science · doi:10.1039/d1ee01404h · Cited by 256
Recent advances in effective protection of sodium metal anode
Fan, L., & Li, X. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.09.017 · Cited by 255
Lu, X., Zhao, H., Qin, Y., Matios, E., Luo, J., Chen, R., Nan, H., Wen, B., Zhang, Y., Li, Y., et al. (2023) · ACS Nano · doi:10.1021/acsnano.3c01759 · Cited by 53
He, J., Tao, T., Yang, F., & Sun, Z. (2022) · ChemSusChem · doi:10.1002/cssc.202102522 · Cited by 29
Na-k liquid alloy: A review on wettability enhancement and ionic carrier selection mechanism
Li, X., Liu, J., Chen, C., Yang, J., Xu, Z., Wu, M., Wang, Y., & Karim, Z. (2021) · Chinese Chemical Letters · doi:10.1016/j.cclet.2020.09.018 · Cited by 12
Metadata
- Authors
- Seh, Z. W., Sun, J., Sun, Y., & Cui, Y.
- Venue
- ACS Central Science
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-11-02
- Volume
- 1
- Issue
- 8
- Pages
- 449-455
- ISSN
- 2374-7943 (ISSN-L)
- 2374-7951
- OpenAlex
- W2341894171
- Cited by
- 979
- References
- 43
- FWCI
- 25.34
- Type
- journal article
- Language
- en
- Open access
- diamond
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.