The DOI matches its Crossref record; 96 of the 96 references it cites were found in a registry or an index.
Prelithiation: A Crucial Strategy for Boosting the Practical Application of Next-Generation Lithium Ion Battery
Open accessAbstract
Abstract With the urgent market demand for high-energy-density batteries, the alloy-type or conversion-type anodes with high specific capacity have gained increasing attention to replace current low-specific-capacity graphite-based anodes. However, alloy-type and conversion-type anodes have large initial irreversible capacity compared with graphite-based anodes, which consume most of the Li+ in the corresponding cathode and severely reduces the energy density of full cells. Therefore, for the practical application of these high-capacity anodes, it is urgent to develop a commercially available prelithiation technique to compensate for their large initial irreversible capacity. At present, various prelithiation methods for compensating the initial irreversible capacity of the anode have been reported, but due to their respective shortcomings, large-scale commercial applications have not yet been achieved. In this review, we have systematically summarized and analyzed the advantages and challenges of various prelithiation methods, providing enlightenment for the further development of each prelithiation strategy toward commercialization and thus facilitating the practical application of high-specific-capacity anodes in the next-generation high-energy-density lithium-ion batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A pomegranate-inspired nanoscale design for large-volume-change lithium battery anodes
Liu, N., Lu, Z., Zhao, J., McDowell, M. T., Lee, H.-W., Zhao, W., & Cui, Y. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.6 · Cited by 2,491
Wu, H., Chan, G., Choi, J. W., Ryu, I., Yao, Y., McDowell, M. T., Lee, S. W., Jackson, A., Yang, Y., Hu, L., et al. (2012) · Nature Nanotechnology · doi:10.1038/nnano.2012.35 · Cited by 2,478
Review—SEI: Past, Present and Future
Peled, E., & Menkin, S. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.1441707jes · Cited by 2,182
A Yolk-Shell Design for Stabilized and Scalable Li-Ion Battery Alloy Anodes
Liu, N., Wu, H., McDowell, M. T., Yao, Y., Wang, C., & Cui, Y. (2012) · Nano Letters · doi:10.1021/nl3014814 · Cited by 1,842
Interconnected Silicon Hollow Nanospheres for Lithium-Ion Battery Anodes with Long Cycle Life
Yao, Y., McDowell, M. T., Ryu, I., Wu, H., Liu, N., Hu, L., Nix, W. D., & Cui, Y. (2011) · Nano Letters · doi:10.1021/nl201470j · Cited by 1,456
A review of advanced and practical lithium battery materials
Marom, R., Amalraj, S. F., Leifer, N., Jacob, D., & Aurbach, D. (2011) · Journal of Materials Chemistry · doi:10.1039/c0jm04225k · Cited by 1,075
Generation and Evolution of the Solid Electrolyte Interphase of Lithium-Ion Batteries
Heiskanen, S. K., Kim, J., & Lucht, B. L. (2019) · Joule · doi:10.1016/j.joule.2019.08.018 · Cited by 1,036
Pinson, M. B., & Bazant, M. Z. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.044302jes · Cited by 946
Trace doping of multiple elements enables stable battery cycling of LiCoO2 at 4.6 V
Zhang, J.-N., Li, Q., Ouyang, C., Yu, X., Ge, M., Huang, X., Hu, E., Ma, C., Li, S., Xiao, R., et al. (2019) · Nature Energy · doi:10.1038/s41560-019-0409-z · Cited by 882
Chae, S., Choi, S., Kim, N., Sung, J., & Cho, J. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201902085 · Cited by 856
Xu, Q., Li, J., Sun, J., Yin, Y., Wan, L., & Guo, Y. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601481 · Cited by 652
Self-citationPrelithiated Silicon Nanowires as an Anode for Lithium Ion Batteries
Liu, N., Hu, L., McDowell, M. T., Jackson, A., & Cui, Y. (2011) · ACS Nano · doi:10.1021/nn2017167 · Cited by 578
Nie, M., Abraham, D. P., Chen, Y., Bose, A., & Lucht, B. L. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp404155y · Cited by 578
Kim, H. J., Choi, S., Lee, S. J., Seo, M. W., Lee, J. G., Deniz, E., Lee, Y. J., Kim, E. K., & Choi, J. W. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b03776 · Cited by 549
Surface and Interface Engineering of Silicon‐Based Anode Materials for Lithium‐Ion Batteries
Luo, W., Chen, X., Xia, Y., Chen, M., Wang, L., Wang, Q., Li, W., & Yang, J. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201701083 · Cited by 549
Jia, H., Li, X., Song, J., Zhang, X., Luo, L., He, Y., Li, B., Cai, Y., Hu, S., Xiao, X., et al. (2020) · Nature Communications · doi:10.1038/s41467-020-15217-9 · Cited by 541
Graphene-based composites for electrochemical energy storage
Wang, B., Ruan, T., Chen, Y., Jin, F., Peng, L., Zhou, Y., Wang, D., & Dou, S. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2019.08.004 · Cited by 530
Self-citationSurface Fluorination of Reactive Battery Anode Materials for Enhanced Stability
Zhao, J., Liao, L., Shi, F., Lei, T., Chen, G., Pei, A., Sun, J., Yan, K., Zhou, G., Xie, J., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b05251 · Cited by 514
Conversion Reaction‐Based Oxide Nanomaterials for Lithium Ion Battery Anodes
Yu, S., Lee, S. H., Lee, D. J., Sung, Y., & Hyeon, T. (2016) · Small · doi:10.1002/smll.201502299 · Cited by 499
Wang, B., Al Abdulla, W., Wang, D., & Zhao, X. S. (2015) · Energy & Environmental Science · doi:10.1039/c4ee03825h · Cited by 487
Self-citationRecent progress on silicon-based anode materials for practical lithium-ion battery applications
Li, P., Zhao, G., Zheng, X., Xu, X., Yao, C., Sun, W., & Dou, S. X. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2018.07.014 · Cited by 480
Self-citationChen, S., Shen, L., van Aken, P. A., Maier, J., & Yu, Y. (2017) · Advanced Materials · doi:10.1002/adma.201605650 · Cited by 475
Air-stable and freestanding lithium alloy/graphene foil as an alternative to lithium metal anodes
Zhao, J., Zhou, G., Yan, K., Xie, J., Li, Y., Liao, L., Jin, Y., Liu, K., Hsu, P.-C., Wang, J., et al. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.129 · Cited by 468
Lin, D., Lu, Z., Hsu, P.-C., Lee, H. R., Liu, N., Zhao, J., Wang, H., Liu, C., & Cui, Y. (2015) · Energy & Environmental Science · doi:10.1039/c5ee01363a · Cited by 462
Ying, H., & Han, W. (2017) · Advanced Science · doi:10.1002/advs.201700298 · Cited by 436
Chang, J., Huang, X., Zhou, G., Cui, S., Hallac, P. B., Jiang, J., Hurley, P. T., & Chen, J. (2014) · Advanced Materials · doi:10.1002/adma.201302757 · Cited by 425
Tarascon, J. M., & Guyomard, D. (1991) · Journal of The Electrochemical Society · doi:10.1149/1.2085331 · Cited by 411
Stabilized Li3N for efficient battery cathode prelithiation
Sun, Y., Li, Y., Sun, J., Li, Y., Pei, A., & Cui, Y. (2017) · Energy Storage Materials · doi:10.1016/j.ensm.2016.10.004 · Cited by 402
High-capacity battery cathode prelithiation to offset initial lithium loss
Sun, Y., Lee, H.-W., Seh, Z. W., Liu, N., Sun, J., Li, Y., & Cui, Y. (2016) · Nature Energy · doi:10.1038/nenergy.2015.8 · Cited by 396
Zhao, J., Lu, Z., Liu, N., Lee, H.-W., McDowell, M. T., & Cui, Y. (2014) · Nature Communications · doi:10.1038/ncomms6088 · Cited by 384
Li, J.-Y., Xu, Q., Li, G., Yin, Y.-X., Wan, L.-J., & Guo, Y.-G. (2017) · Materials Chemistry Frontiers · doi:10.1039/c6qm00302h · Cited by 384
Self-citationForney, M. W., Ganter, M. J., Staub, J. W., Ridgley, R. D., & Landi, B. J. (2013) · Nano Letters · doi:10.1021/nl401776d · Cited by 381
Zhao, J., Lu, Z., Wang, H., Liu, W., Lee, H.-W., Yan, K., Zhuo, D., Lin, D., Liu, N., & Cui, Y. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b04526 · Cited by 369
Holtstiege, F., Bärmann, P., Nölle, R., Winter, M., & Placke, T. (2018) · Batteries · doi:10.3390/batteries4010004 · Cited by 357
Solid Electrolyte Interphases on Sodium Metal Anodes
Bao, C., Wang, B., Liu, P., Wu, H., Zhou, Y., Wang, D., Liu, H., & Dou, S. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202004891 · Cited by 354
Self-citationDesign of Complex Nanomaterials for Energy Storage: Past Success and Future Opportunity
Liu, Y., Zhou, G., Liu, K., & Cui, Y. (2017) · Accounts of Chemical Research · doi:10.1021/acs.accounts.7b00450 · Cited by 323
Nanostructured transition metal oxides as advanced anodes for lithium-ion batteries
Zhang, J., & Yu, A. (2015) · Science Bulletin · doi:10.1007/s11434-015-0771-6 · Cited by 283
Solvent-Free Manufacturing of Electrodes for Lithium-ion Batteries
Ludwig, B., Zheng, Z., Shou, W., Wang, Y., & Pan, H. (2016) · Scientific Reports · doi:10.1038/srep23150 · Cited by 280
Yoshio, M., Wang, H., Fukuda, K., Umeno, T., Abe, T., & Ogumi, Z. (2004) · Journal of Materials Chemistry · doi:10.1039/b316702j · Cited by 276
Zou, K., Deng, W., Cai, P., Deng, X., Wang, B., Liu, C., Li, J., Hou, H., Zou, G., & Ji, X. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202005581 · Cited by 275
Self-citationSpherical Carbon‐Coated Natural Graphite as a Lithium‐Ion Battery‐Anode Material
Yoshio, M., Wang, H., & Fukuda, K. (2003) · Angewandte Chemie International Edition · doi:10.1002/anie.200351203 · Cited by 267
Luo, W., Wang, Y., Chou, S., Xu, Y., Li, W., Kong, B., Dou, S. X., Liu, H. K., & Yang, J. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.07.006 · Cited by 249
Self-citationCao, W., & Zheng, J. P. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.04.033 · Cited by 241
Progress and perspectives on pre-lithiation technologies for lithium ion capacitors
Jin, L., Shen, C., Shellikeri, A., Wu, Q., Zheng, J., Andrei, P., Zhang, J.-G., & Zheng, J. P. (2020) · Energy & Environmental Science · doi:10.1039/d0ee00807a · Cited by 238
Li Storage and Impedance Spectroscopy Studies on Co3O4, CoO, and CoN for Li-Ion Batteries
Reddy, M. V., Prithvi, G., Loh, K. P., & Chowdari, B. V. R. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am4047552 · Cited by 220
Chemically Prelithiated Hard‐Carbon Anode for High Power and High Capacity Li‐Ion Batteries
Shen, Y., Qian, J., Yang, H., Zhong, F., & Ai, X. (2020) · Small · doi:10.1002/smll.201907602 · Cited by 220
Recent advances in prelithiation materials and approaches for lithium-ion batteries and capacitors
Sun, C., Zhang, X., Li, C., Wang, K., Sun, X., & Ma, Y. (2020) · Energy storage materials · doi:10.1016/j.ensm.2020.07.009 · Cited by 214
Chen, S., Gordin, M. L., Yi, R., Howlett, G., Sohn, H., & Wang, D. (2012) · Physical Chemistry Chemical Physics · doi:10.1039/c2cp42231j · Cited by 213
Self-citationMeng, Q., Li, G., Yue, J., Xu, Q., Yin, Y.-X., & Guo, Y.-G. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b12086 · Cited by 196
Coated Lithium Powder (CLiP) Electrodes for Lithium‐Metal Batteries
Heine, J., Krüger, S., Hartnig, C., Wietelmann, U., Winter, M., & Bieker, P. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201300815 · Cited by 192
Ultrastable Silicon Anode by Three-Dimensional Nanoarchitecture Design
Huang, G., Han, J., Lu, Z., Wei, D., Kashani, H., Watanabe, K., & Chen, M. (2020) · ACS Nano · doi:10.1021/acsnano.9b09928 · Cited by 186
Metallurgically lithiated SiO x anode with high capacity and ambient air compatibility
Zhao, J., Lee, H.-W., Sun, J., Yan, K., Liu, Y., Liu, W., Lu, Z., Lin, D., Zhou, G., & Cui, Y. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1603810113 · Cited by 182
A prelithiated carbon anode for lithium-ion battery applications
Jarvis, C. R., Lain, M. J., Yakovleva, M. V., & Gao, Y. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.07.051 · Cited by 175
Jeong, M.-G., Du, H. L., Islam, M., Lee, J. K., Sun, Y.-K., & Jung, H.-G. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b02433 · Cited by 162
Chemical Prelithiation of Negative Electrodes in Ambient Air for Advanced Lithium-Ion Batteries
Wang, G., Li, F., Liŭ, D., Zheng, D., Luo, Y., Qu, D., Ding, T., & Qu, D. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b19416 · Cited by 159
Meng, T., Li, B., Wang, Q., Hao, J., Huang, B., Gu, F. L., Xu, H., Liu, P., & Tong, Y. (2020) · ACS Nano · doi:10.1021/acsnano.0c01796 · Cited by 159
ZnFe2O4‐C/LiFePO4‐CNT: A Novel High‐Power Lithium‐Ion Battery with Excellent Cycling Performance
Varzi, A., Bresser, D., von Zamory, J., Müller, F., & Passerini, S. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201400054 · Cited by 155
Qin, X., Zhang, H., Wu, J., Chu, X., He, Y., Han, C., Miao, C., Wang, S., Li, B., & Kang, F. (2015) · Carbon · doi:10.1016/j.carbon.2015.02.044 · Cited by 144
A Novel Lithium‐Doping Approach for an Advanced Lithium Ion Capacitor
Park, M., Lim, Y., Kim, J., Kim, Y., Cho, J., & Kim, J. (2011) · Advanced Energy Materials · doi:10.1002/aenm.201100270 · Cited by 143
Sohn, M., Lee, D. G., Park, H., Park, C., Choi, J., & Kim, H. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201800855 · Cited by 141
Tokranov, A., Sheldon, B. W., Li, C., Minne, S. C., & Xiao, X. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am500363t · Cited by 139
A general prelithiation approach for group IV elements and corresponding oxides
Zhao, J., Sun, J., Pei, A., Zhou, G., Yan, K., Liu, Y., Lin, D., & Cui, Y. (2017) · Energy storage materials · doi:10.1016/j.ensm.2017.06.013 · Cited by 138
Ruan, T., Wang, B., Yang, Y., Zhang, X., Song, R., Ning, Y., Wang, Z., Yu, H., Zhou, Y., Wang, D., et al. (2020) · Advanced Materials · doi:10.1002/adma.202000151 · Cited by 136
Self-citationA new strategy to mitigate the initial capacity loss of lithium ion batteries
Su, X., Lin, C., Wang, X. P., Maroni, V. A., Ren, Y., Johnson, C. S., & Lu, W. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.05.063 · Cited by 130
Liu, S.-Y., Xie, J., Zheng, Y.-X., Cao, G., Zhu, T., & Zhao, X. (2012) · Electrochimica Acta · doi:10.1016/j.electacta.2012.01.094 · Cited by 126
Lithium Sulfide/Metal Nanocomposite as a High‐Capacity Cathode Prelithiation Material
Sun, Y., Lee, H., Seh, Z. W., Zheng, G. W., Sun, J., Li, Y., & Cui, Y. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600154 · Cited by 126
Arreaga‐Salas, D., Sra, A. K., Roodenko, K., Chabal, Y. J., & Hinkle, C. L. (2012) · The Journal of Physical Chemistry C · doi:10.1021/jp300787p · Cited by 124
Modified solid-electrolyte interphase toward stable Li metal anode
Jiang, Y., Wang, B., Liu, P., Wang, B., Zhou, Y., Wang, D., Liu, H. K., & Dou, S. X. (2020) · Nano Energy · doi:10.1016/j.nanoen.2020.105308 · Cited by 113
Self-citationSBR–PVDF based binder for the application of SLMP in graphite anodes
Wang, L., Fu, Y., Battaglia, V., & Liu, G. (2013) · RSC Advances · doi:10.1039/c3ra42773k · Cited by 111
Role of Li6CoO4Cathode Additive in Li-Ion Cells Containing Low Coulombic Efficiency Anode Material
Noh, M., & Cho, J. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.085208jes · Cited by 111
Li2O Removal from Li5FeO4: A Cathode Precursor for Lithium-Ion Batteries
Johnson, C. S., Kang, S.-H., Vaughey, J. T., Pol, S. V., Balasubramanian, M., & Thackeray, M. M. (2010) · Chemistry of Materials · doi:10.1021/cm902713m · Cited by 109
Wang, Y., Xing, G., Han, Z., Shi, Y., Wong, J. I., Huang, Z. X., Ostrikov, K., & Yang, H. Y. (2014) · Nanoscale · doi:10.1039/c4nr01553c · Cited by 103
LiFeO2-Incorporated Li2MoO3 as a Cathode Additive for Lithium-Ion Battery Safety
Park, K., Im, D., Benayad, A., Dylla, A. G., Stevenson, K. J., & Goodenough, J. B. (2012) · Chemistry of Materials · doi:10.1021/cm300505y · Cited by 101
Chemical Formation of a Solid Electrolyte Interface on the Carbon Electrode of a Li‐Ion Cell
Scott, M. G., Whitehead, A., & Owen, J. R. (1998) · Journal of The Electrochemical Society · doi:10.1149/1.1838511 · Cited by 100
Li2NiO2 as a Novel Cathode Additive for Overdischarge Protection of Li-Ion Batteries
Lee, H., Chang, S.-K., Goh, E., et al. (2007) · Chemistry of Materials · doi:10.1021/cm702290p · Cited by 95
Han, Y., & Lee, J. (2003) · Electrochimica Acta · doi:10.1016/s0013-4686(02)00845-9 · Cited by 92
Synthesis, Electrochemical Properties, and Phase Stability of Li2NiO2 with the Immm Structure
Kang, K., Chen, C., Hwang, B., & Ceder, G. (2004) · Chemistry of Materials · doi:10.1021/cm049922h · Cited by 89
Toward pre-lithiatied high areal capacity silicon anodes for Lithium-ion batteries
Marinaro, M., Weinberger, M., & Wohlfahrt‐Mehrens, M. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.03.139 · Cited by 88
Impact of high rate discharge on the aging of lithium nickel cobalt aluminum oxide batteries
Wong, D. N., Shrestha, B., Wetz, D. A., & Heinzel, J. M. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.01.110 · Cited by 87
Electrochemical behavior of a lithium-pre-doped carbon-coated silicon monoxide anode cell
Seong, I. W., Kim, K. T., & Yoon, W. Y. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.11.029 · Cited by 86
Li‐Metal‐Free Prelithiation of Si‐Based Negative Electrodes for Full Li‐Ion Batteries
Zhou, H., Wang, X., & Chen, D. (2015) · ChemSusChem · doi:10.1002/cssc.201500287 · Cited by 83
Chemical properties of various organic electrolytes for lithium rechargeable batteries
Mori, S., Asahina, H., Suzuki, H., Yonei, A., & Yokoto, K. (1997) · Journal of Power Sources · doi:10.1016/s0378-7753(97)02619-0 · Cited by 82
Park, Y., Bang, H. J., Oh, S. M., Sun, Y., & Lee, S. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.01.067 · Cited by 76
Electromechanical Probing of Li/Li2CO3Core/Shell Particles in a TEM
Xiang, B., Wang, L., Liu, G., & Minor, A. M. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.018303jes · Cited by 74
Zhong, G., Qu, K., Ren, C., Su, Y. J., Fu, B., Zi, M., Dai, L., Xiao, Q., Xu, J., Zhong, X., et al. (2020) · Nano Energy · doi:10.1016/j.nanoen.2020.104876 · Cited by 74
Self-citationA lithium ion cell containing a non-lithiated cathode
Jarvis, C., Lain, M. J., Gao, Y., & Yakovleva, M. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.03.023 · Cited by 70
Lithiation of amorphous carbon negative electrode for Li ion capacitor
Gourdin, G., Smith, P. H., Jiang, T., et al. (2012) · Journal of Electroanalytical Chemistry · doi:10.1016/j.jelechem.2012.08.029 · Cited by 58
Moorhead‐Rosenberg, Z., Allcorn, E., & Manthiram, A. (2014) · Chemistry of Materials · doi:10.1021/cm5024426 · Cited by 58
Thermal Lithiated-TiO2: A Robust and Electron-Conducting Protection Layer for Li–Si Alloy Anode
Wang, C., Han, Y., Li, S., Chen, T., Yu, J., & Lu, Z. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b02150 · Cited by 53
Fu, J., Liu, H., Liao, L., Fan, P., Wang, Z., Wu, Y., Zhang, Z., Hai, Y., Lv, G., Mei, L., et al. (2018) · Frontiers in Chemistry · doi:10.3389/fchem.2018.00624 · Cited by 49
Self-citationAravindan, V., Nagasubramanian, A., Shubha, N., Jayaraman, S., & Srinivasan, M. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.08.078 · Cited by 46
Zhang, H., Li, F., Liu, C., & Cheng, H. (2008) · The Journal of Physical Chemistry C · doi:10.1021/jp8003536 · Cited by 43
Dose, W. M., Blauwkamp, J., Piernas-Muñoz, M. J., Bloom, I., Xue, R., Klie, R. F., Senguttuvan, P., & Johnson, C. S. (2019) · ACS Applied Energy Materials · doi:10.1021/acsaem.9b00695 · Cited by 39
Lee, S., Song, H., Hwang, J. Y., & Jeong, Y. (2017) · Fibers and Polymers · doi:10.1007/s12221-017-7715-5 · Cited by 26
Kosilov, V. V., Potapenko, H., & Kirillov, S. А. (2017) · Journal of Solid State Electrochemistry · doi:10.1007/s10008-017-3671-7 · Cited by 25
Kim, J., Kumagai, N., & Cho, T.-H. (2007) · Journal of The Electrochemical Society · doi:10.1149/1.2803523 · Cited by 9
Cited by
Cao, Z., Zheng, X., Qu, Q., Huang, Y., & Zheng, H. (2021) · Advanced Materials · doi:10.1002/adma.202103178 · Cited by 336
Promises and Challenges of the Practical Implementation of Prelithiation in Lithium‐Ion Batteries
Zhan, R., Wang, X., Chen, Z., Seh, Z. W., Wang, L., & Sun, Y. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202101565 · Cited by 282
Metadata
- Authors
- Wang, F., Wang, B., Li, J., Wang, B., Zhou, Y., Wang, D., Liu, H., & Dou, S.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2021-02-11
- Volume
- 15
- Issue
- 2
- Pages
- 2197-2218
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W3127796055
- Cited by
- 357
- References
- 96
- FWCI
- 17.79
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.