CoChat

Electronic Structure Tuning in Ni3FeN/r-GO Aerogel toward Bifunctional Electrocatalyst for Overall Water Splitting

The DOI matches its Crossref record; 47 of the 47 references it cites were found in a registry or an index; none of the 21 sources its claims cite is checked for support yet.

Abstract

Searching for the highly active, stable, and high-efficiency bifunctional electrocatalysts for overall water splitting, e.g., for both oxygen evolution (OER) and hydrogen evolution (HER), is paramount in terms of bringing future renewable energy systems and energy conversion processes to reality. Herein, three-dimensional (3D) Ni 3 FeN nanoparticles/reduced graphene oxide (r-GO) aerogel electrocatalysts were fabricated using precursors of (Ni,Fe)/r-GO alginate hydrogels through an ion-exchange process, followed by a convenient one-step nitrogenization treatment in NH 3 at 700 °C. The resultant materials exhibited excellent electrocatalytic performance for OER and HER in alkaline media, with only small overpotentials of 270 and 94 mV at a current density of 10 mA cm –2, respectively. The good performance was attributed to abundant active sites and high electrical conductivity of the bimetallic nitrides and efficient mass transport of the 3D r-GO aerogel framework. Furthermore, an alkaline electrolyzer was set up using Ni 3 FeN/r-GO as both the cathode and the anode, which achieved a 10 mA cm –2 current density at 1.60 V with durability of 100 h for overall water splitting. Density functional theory calculations support that Ni 3 FeN (111)/r-GO is more favorable for overall water splitting since the surface electronic structure of Ni 3 FeN is tuned by transferring electrons from Ni 3 FeN cluster to the r-GO through interaction of two metal species. Thus, the currently developed Ni 3 FeN/r-GO with superior water-splitting performance may potentially serve as a material for use in industrial alkaline water electrolyzers.

Overview

CoChat Summary

TL;DR

Ni3FeN nanoparticles on reduced graphene oxide aerogel (Ni3FeN/r-GO) were synthesized from (Ni,Fe)-alginate/r-GO hydrogels and evaluated as a bifunctional electrocatalyst for overall water splitting. The optimized Ni3FeN/r-GO-20 achieved OER and HER overpotentials of 270 and 94 mV at 10 mA cm−2, respectively, and an alkaline electrolyzer reached 10 mA cm−2 at 1.60 V with 100 h durability.

Key findings

  • Ni3FeN/r-GO-20 showed the lowest OER overpotential of 270 mV at 10 mA cm−2, an onset potential of ∼1.48 V vs RHE, and a Tafel slope of 54 mV dec−1; at 50 mA cm−2 its overpotential was 298 mV, compared with 308 mV for Ni3Fe/r-GO-20, 352 mV for Ni3N/r-GO-20, 390 mV for Fe2N/r-GO-20, 421 mV for Ni3FeN, and 400 mV for IrO2/C.
  • For HER, Ni3FeN/r-GO-20 required 94 mV at 10 mA cm−2 and had a Tafel slope of 90 mV dec−1, lower than Ni3Fe/r-GO-20 (110 mV), Ni3N/r-GO-20 (156 mV), Fe2N/r-GO-20 (195 mV), and Ni3FeN (235 mV); Pt/C required 50 mV, but Ni3FeN/r-GO-20 surpassed Pt/C beyond an overpotential of 213 mV.
  • In a two-electrode alkaline electrolyzer using Ni3FeN/r-GO-20 as both anode and cathode, overall water splitting reached 10 mA cm−2 at 1.60 V and retained a steady current density for 100 h; the voltage difference between HER and OER was 1.59 V at 10 mA cm−2.
  • DFT calculations indicated that Ni3FeN(111)/r-GO transfers 1.78 e− from the Ni3FeN cluster to r-GO, with a theoretical OER overpotential of 0.46 eV versus 0.64 eV for Ni3N(001)/r-GO and 0.76 eV for Fe2N(001)/r-GO; ΔGH* was 0.17 eV for Ni3FeN(111)/r-GO versus 0.53 and 0.62 eV for the single-metal nitride models.

Methods

  • Synthesis: sodium alginate/r-GO dispersion was poured into FeCl3/NiCl2 solution (Ni/Fe molar ratio 10:1) to form (Ni,Fe)-alginate/r-GO hydrogel via an “egg-box” structure, lyophilized to aerogel, then heated at 700 °C for 1 h under NH3 to form Ni3FeN/r-GO; controls included Ni3Fe/r-GO-20, Ni3N/r-GO-20, and Fe2N/r-GO-20.
  • Characterization: XRD, TEM/HRTEM, EDS mapping, ICP-MS, TGA, XPS, Raman, AFM, and BET surface area/pore analysis.
  • Electrochemistry: three-electrode tests in 1 M KOH with catalyst loaded on Ni foam (0.5 mg/cm2), graphite counter electrode, Ag/AgCl reference, LSV at 5 mV s−1, EIS from 0.01 to 105 Hz, and double-layer capacitance; overall water splitting used a two-electrode configuration without iR-compensation. DFT used VASP with PBE on Ni3FeN(111)/r-GO, Ni3N(001)/r-GO, and Fe2N(001)/r-GO models.

Limitations

  • The paper does not state a dedicated limitations section.
  • Evident from the text: the DFT study uses idealized Ni3FeN(111)/r-GO, Ni3N(001)/r-GO, and Fe2N(001)/r-GO model surfaces and does not account for full electrolyte, solvent, or long-term surface reconstruction effects.
  • Evident from the text: the two-electrode overall water-splitting measurements were performed without iR-correction, and half-reaction durability was tested by 2000 CV cycles and 10 h chronoamperometry, while overall electrolyzer stability was tested for 100 h at 1.60 V.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.1021/acsnano.7b05971

Cites

47 of 47 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Verification

Claims the paper makes

0 Valid · 0 Not valid · 12 Not checked · 43 Own results and interpretations

30 more claims

Create a free account to see all 55 claims and every source verdict.

See all claims — free account
  • It may state two separate claims as one. 15
  • Probably not a substantial claim. 5

Create a free account to see these claims.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

Each contradiction between two passages listed here was confirmed by an independent check.

1 of 1

Citations

Cites

Show all 47 references

Cited by

See all 542

Metadata

Authors
Gu, Y., Chen, S., Ren, J., Jia, Y. A., Chen, C., Komarneni, S., Yang, D., & Yao, X.
Affiliations
  • Qingdao University (CN)
  • Institute of Coal Chemistry (CN)
  • North University of China (CN)
  • Griffith University (AU)
  • State Key Laboratory of Coal Conversion, Institute of Coal Chemistry, Chinese Academy of Science, Taiyuan 030001, P. R. China
  • Pennsylvania State University (US)
Corresponding author
  • Yang, Dongjiang
  • Yao, Xiangdong
Venue
ACS Nano
Published
2018-01-02
Volume
12
Issue
1
Pages
245-253
ISSN
  • 1936-0851 (ISSN-L)
  • 1936-086X
OpenAlex
W2777365994
Cited by
540
References
47
Citations by year
2026: 30 · 2025: 26 · 2024: 47 · 2023: 55 · 2022: 71 · 2021: 85 · 2020: 92 · 2019: 89 · 2018: 45
FWCI
16.56
Type
journal article
Language
en
Open access
closed
Locations
  • ACS Nano (publishedVersion)
  • PubMed (publishedVersion)
  • Griffith Research Online (submittedVersion)
Funders
  • Australian Research Council (170103317)
  • National Natural Science Foundation of China (21501105, 51473081, 51672143)
  • Natural Science Foundation of Shandong Province (JQ201713)
Topics
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › CO2 Reduction Techniques and Catalysts
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Advanced Photocatalysis Techniques
Keywords
reduced graphene oxide aerogel, bifunctional electrocatalysts, overall water splitting, oxygen evolution reaction, hydrogen evolution reaction, ion exchange, alginate hydrogel, alkaline electrolyzer, electronic structure modulation, metal-support interaction, mass transfer

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

A language model drew the claims from the paper on 2026-10-11, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-11 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.