The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
High Efficiency Immobilization of Sulfur on Nitrogen-Enriched Mesoporous Carbons for Li–S Batteries
Abstract
Nitrogen-enriched mesoporous carbons with tunable nitrogen content and similar mesoporous structures have been prepared by a facile colloid silica nanocasting to house sulfur for lithium-sulfur batteries. The results give unequivocal proof that nitrogen doping could assist mesoporous carbon to suppress the shuttling phenomenon, possibly via an enhanced surface interaction between the basic nitrogen functionalities and polysulfide species. However, nitrogen doping only within an appropriate level can improve the electronic conductivity of the carbon matrix. Thus, the dependence of total electrochemical performance on the nitrogen content is nonmonotone. At an optimal nitrogen content of 8.1 wt %, the carbon/sulfur composites deliver a highest reversible discharge capacity of 758 mA h g(-1) at a 0.2 C rate and 620 mA h g(-1) at a 1 C rate after 100 cycles. Furthermore, with the assistance of PPy/PEG hybrid coating, the composites could further increase the reversible capacity to 891 mA h g(-1) after 100 cycles. These encouraging results suggest nitrogen doping and surface coating of the carbon hosts are good strategies to improve the performance carbon/sulfur-based cathodes for lithium-sulfur batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Challenges Facing Lithium Batteries and Electrical Double‐Layer Capacitors
Choi, N., Chen, Z., Freunberger, S. A., Ji, X., Sun, Y., Amine, K., Yushin, G., Nazar, L. F., Cho, J., & Bruce, P. G. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201201429 · Cited by 2,700
Sulfur-Doped Graphene as an Efficient Metal-free Cathode Catalyst for Oxygen Reduction
Yang, Z., Yao, Z., Li, G., Fang, G., Nie, H., Liu, Z., Zhou, X., Chen, X., & Huang, S. (2012) · ACS Nano · doi:10.1021/nn203393d · Cited by 2,138
Ji, X., & Nazar, L. F. (2010) · Journal of Materials Chemistry · doi:10.1039/b925751a · Cited by 1,967
Porous Hollow Carbon@Sulfur Composites for High‐Power Lithium–Sulfur Batteries
Jayaprakash, N., Shen, J., Moganty, S. S., Corona, A., & Archer, L. A. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201100637 · Cited by 1,811
Positive Electrode Materials for Li-Ion and Li-Batteries
Ellis, B. L., Lee, K. T., & Nazar, L. F. (2010) · Chemistry of Materials · doi:10.1021/cm902696j · Cited by 1,697
Hulicova‐Jurcakova, D., Seredych, M., Lu, G. Q., & Bandosz, T. J. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200801236 · Cited by 1,672
Qie, L., Chen, W., Wang, Z., Shao, Q., Li, X., Yuan, L., Hu, X., Zhang, W., & Huang, Y. (2012) · Advanced Materials · doi:10.1002/adma.201104634 · Cited by 1,656
Graphene Oxide as a Sulfur Immobilizer in High Performance Lithium/Sulfur Cells
Ji, L., Rao, M., Zheng, H., Zhang, L., Li, Y., Duan, W., Guo, J., Cairns, E. J., & Zhang, Y. (2011) · Journal of the American Chemical Society · doi:10.1021/ja206955k · Cited by 1,505
Zheng, G., Yang, Y., Cha, J. J., Hong, S. S., & Cui, Y. (2011) · Nano Letters · doi:10.1021/nl2027684 · Cited by 1,295
Zhang, B., Qin, X., Li, G. R., & Gao, X. P. (2010) · Energy & Environmental Science · doi:10.1039/c002639e · Cited by 1,280
Spherical Ordered Mesoporous Carbon Nanoparticles with High Porosity for Lithium–Sulfur Batteries
Schuster, J., He, G., Mandlmeier, B., Yim, T., Lee, K. T., Bein, T., & Nazar, L. F. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201107817 · Cited by 1,114
Seredych, M., Hulicova-Jurcakova, D., Lu, G. Q., & Bandosz, T. J. (2008) · Carbon · doi:10.1016/j.carbon.2008.06.027 · Cited by 879
Improving the Performance of Lithium–Sulfur Batteries by Conductive Polymer Coating
Yang, Y., Yu, G., Cha, J. J., Wu, H., Vosgueritchian, M., Yao, Y., Bao, Z., & Cui, Y. (2011) · ACS Nano · doi:10.1021/nn203436j · Cited by 866
Hierarchically Structured Sulfur/Carbon Nanocomposite Material for High-Energy Lithium Battery
Liang, C., Dudney, N. J., & Howe, J. Y. (2009) · Chemistry of Materials · doi:10.1021/cm902050j · Cited by 862
In Operando X-ray Diffraction and Transmission X-ray Microscopy of Lithium Sulfur Batteries
Nelson, J., Misra, S., Yang, Y., Jackson, A., Liu, Y., Wang, H., Dai, H., Andrews, J. C., Cui, Y., & Toney, M. F. (2012) · Journal of the American Chemical Society · doi:10.1021/ja2121926 · Cited by 538
High “C” rate Li-S cathodes: sulfur imbibed bimodal porous carbons
He, G., Ji, X., & Nazar, L. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01219c · Cited by 475
Optimization of mesoporous carbon structures for lithium–sulfur battery applications
Li, X., Cao, Y., Qi, W., Saraf, L. V., Xiao, J., Nie, Z., Mietek, J., Zhang, J.-G., Schwenzer, B., & Liu, J. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm12979a · Cited by 454
Wei, S., Zhang, H., Huang, Y., et al. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00505c · Cited by 339
Zhang, L., Ji, L., Glans, P.-A., Zhang, Y., Zhu, J., & Guo, J. (2012) · Physical Chemistry Chemical Physics · doi:10.1039/c2cp42866k · Cited by 333
Fu, Y., & Manthiram, A. (2012) · The Journal of Physical Chemistry C · doi:10.1021/jp300950m · Cited by 278
Li/S fundamental chemistry and application to high-performance rechargeable batteries
AKRIDGE, J. (2004) · Solid State Ionics · doi:10.1016/j.ssi.2004.07.070 · Cited by 251
Yang, X., Wu, D., Chen, X., & Fu, R. (2010) · The Journal of Physical Chemistry C · doi:10.1021/jp101255d · Cited by 247
Preparation and electrochemical properties of sulfur–acetylene black composites as cathode materials
Zhang, B., Lai, C., Zhou, Z. P., et al. (2009) · Electrochimica Acta · doi:10.1016/j.electacta.2009.01.056 · Cited by 200
Lithium–Sulfur Batteries Based on Nitrogen‐Doped Carbon and an Ionic‐Liquid Electrolyte
Sun, X., Wang, X., Mayes, R. T., & Dai, S. (2012) · ChemSusChem · doi:10.1002/cssc.201200101 · Cited by 199
Jin, H., Zhang, H., Zhong, H., & Zhang, J. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01437d · Cited by 179
Three-dimensional mesoporous carbon aerogels: ideal catalyst supports for enhanced H2S oxidation
Long, D., Chen, Q., Qiao, W., Zhan, L., Liang, X., & Ling, L. (2009) · Chemical Communications · doi:10.1039/b900808j · Cited by 69
Self-citationChoi, Y. S., Joo, S. H., Lee, S.-A., You, D. J., Kim, H., Pak, C., Chang, H., & Seung, D. (2006) · Macromolecules · doi:10.1021/ma052363v · Cited by 67
Cited by
Designing high-energy lithium–sulfur batteries
Seh, Z. W., Sun, Y., Zhang, Q., & Cui, Y. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00410a · Cited by 2,573
Review on High‐Loading and High‐Energy Lithium–Sulfur Batteries
Peng, H., Huang, J., Cheng, X., & Zhang, Q. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700260 · Cited by 1,746
Lithium–Sulfur Batteries: Progress and Prospects
Manthiram, A., Chung, S., & Zu, C. (2015) · Advanced Materials · doi:10.1002/adma.201405115 · Cited by 1,620
Zhang, B., Kang, F., Tarascon, J.-M., & Kim, J.-K. (2016) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.08.002 · Cited by 720
Porous Carbons: Structure‐Oriented Design and Versatile Applications
Tian, W., Zhang, H., Duan, X., Sun, H., Shao, G., & Wang, S. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201909265 · Cited by 657
Metadata
- Authors
- Sun, F., Wang, J., Chen, H., Li, W., Qiao, W., Long, D., & Ling, L.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2013-06-04
- Volume
- 5
- Issue
- 12
- Pages
- 5630-5638
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2000055476
- Cited by
- 330
- References
- 29
- FWCI
- 22.77
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.