The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Capacitive Energy Storage in Nanostructured Carbon–Electrolyte Systems
Abstract
Securing our energy future is the most important problem that humanity faces in this century. Burning fossil fuels is not sustainable, and wide use of renewable energy sources will require a drastically increased ability to store electrical energy. In the move toward an electrical economy, chemical (batteries) and capacitive energy storage (electrochemical capacitors or supercapacitors) devices are expected to play an important role. This Account summarizes research in the field of electrochemical capacitors conducted over the past decade. Overall, the combination of the right electrode materials with a proper electrolyte can successfully increase both the energy stored by the device and its power, but no perfect active material exists and no electrolyte suits every material and every performance goal. However, today, many materials are available, including porous activated, carbide-derived, and templated carbons with high surface areas and porosities that range from subnanometer to just a few nanometers. If the pore size is matched with the electrolyte ion size, those materials can provide high energy density. Exohedral nanoparticles, such as carbon nanotubes and onion-like carbon, can provide high power due to fast ion sorption/desorption on their outer surfaces. Because of its higher charge-discharge rates compared with activated carbons, graphene has attracted increasing attention, but graphene had not yet shown a higher volumetric capacitance than porous carbons. Although aqueous electrolytes, such as sodium sulfate, are the safest and least expensive, they have a limited voltage window. Organic electrolytes, such as solutions of [N(C2H5)4]BF4 in acetonitrile or propylene carbonate, are the most common in commercial devices. Researchers are increasingly interested in nonflammable ionic liquids. These liquids have low vapor pressures, which allow them to be used safely over a temperature range from -50 °C to at least 100 °C and over a larger voltage window, which results in a higher energy density than other electrolytes. In situ characterization techniques, such as nuclear magnetic resonance (NMR), small-angle X-ray scattering (SAXS) and small-angle neutron scattering (SANS), and electrochemical quartz crystal microbalance (EQCM) have improved our understanding of the electrical double layer in confinement and desolvation of ions in narrow pores. Atomisitic and continuum modeling have verified and guided these experimental studies. The further development of materials and better understanding of charged solid-electrolyte interfaces should lead to wider use of capacitive energy storage at scales ranging from microelectronics to transportation and the electrical grid. Even with the many exciting results obtained using newer materials, such as graphene and nanotubes, the promising properties reported for new electrode materials do not directly extrapolate to improved device performance. Although thin films of nanoparticles may show a very high gravimetric power density and discharge rate, those characteristics will not scale up linearly with the thickness of the electrode.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Geim, A. K., & Novoselov, K. S. (2007) · Nature Materials · doi:10.1038/nmat1849 · Cited by 39,979
Cited by
Where do batteries end and supercapacitors begin?
Simon, P., Gogotsi, Y., & Dunn, B. (2014) · Science · doi:10.1126/science.1249625 · Cited by 5,634
Self-citationGeorgakilas, V., Perman, J. A., Tucek, J., & Zboril, R. (2015) · Chemical Reviews · doi:10.1021/cr500304f · Cited by 2,147
Energy storage technologies and real life applications – A state of the art review
Aneke, M., & Wang, M. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.06.097 · Cited by 1,754
Towards flexible solid-state supercapacitors for smart and wearable electronics
Dubal, D. P., Chodankar, N. R., Kim, D.-H., & Gomez-Romero, P. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00505a · Cited by 1,725
Multidimensional materials and device architectures for future hybrid energy storage
Lukatskaya, M. R., Dunn, B., & Gogotsi, Y. (2016) · Nature Communications · doi:10.1038/ncomms12647 · Cited by 1,618
Self-citation3D carbon based nanostructures for advanced supercapacitors
Jiang, H., Lee, P. S., & Li, C. (2013) · Energy Environ. Sci. · doi:10.1039/c2ee23284g · Cited by 1,511
Holey graphene frameworks for highly efficient capacitive energy storage
Xu, Y., Lin, Z., Zhong, X., Huang, X., Weiss, N. O., Huang, Y., & Duan, X. (2014) · Nature Communications · doi:10.1038/ncomms5554 · Cited by 1,376
Beidaghi, M., & Gogotsi, Y. (2014) · Energy & Environmental Science · doi:10.1039/c3ee43526a · Cited by 1,293
Self-citationSalunkhe, R. R., Kaneti, Y. V., & Yamauchi, Y. (2017) · ACS Nano · doi:10.1021/acsnano.7b02796 · Cited by 1,279
Wang, Q., Yan, J., & Fan, Z. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03109e · Cited by 1,225
Zhang, C. (., Anasori, B., Seral‐Ascaso, A., Park, S., McEvoy, N., Shmeliov, A., Duesberg, G. S., Coleman, J. N., Gogotsi, Y., & Nicolosi, V. (2017) · Advanced Materials · doi:10.1002/adma.201702678 · Cited by 1,159
Self-citationUnderstanding and Calibration of Charge Storage Mechanism in Cyclic Voltammetry Curves
Pu, X., Zhao, D., Fu, C., Chen, Z., Cao, S., Wang, C., & Cao, Y. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202104167 · Cited by 958
Chodankar, N. R., Pham, H. D., Nanjundan, A. K., Fernando, J. F. S., Jayaramulu, K., Golberg, D., Han, Y., & Dubal, D. P. (2020) · Small · doi:10.1002/smll.202002806 · Cited by 852
Three-dimensional graphene materials: preparation, structures and application in supercapacitors
Cao, X., Yin, Z., & Zhang, H. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee00050a · Cited by 826
Zhang, L., Zhang, F., Yang, X., Long, G., Wu, Y., Zhang, T., Leng, K., Huang, Y., Ma, Y., Yu, A., et al. (2013) · Scientific Reports · doi:10.1038/srep01408 · Cited by 721
Wang, X., Zhang, Y., Zhi, C., Wang, X., Tang, D., Xu, Y., Weng, Q., Jiang, X., Mitome, M., Golberg, D., et al. (2013) · Nature Communications · doi:10.1038/ncomms3905 · Cited by 694
Functional materials derived from open framework templates/precursors: synthesis and applications
Sun, J.-K., & Xu, Q. (2014) · Energy & Environmental Science · doi:10.1039/c4ee00517a · Cited by 687
Nanoengineering of 2D MXene‐Based Materials for Energy Storage Applications
Nan, J., Guo, X., Xiao, J., Li, X., Chen, W., Wu, W., Liu, H., Wang, Y., Wu, M., & Wang, G. (2021) · Small · doi:10.1002/smll.201902085 · Cited by 685
Zhang, S., Zhang, J., Zhang, Y., & Deng, Y. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00509 · Cited by 659
Porous Carbons: Structure‐Oriented Design and Versatile Applications
Tian, W., Zhang, H., Duan, X., Sun, H., Shao, G., & Wang, S. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201909265 · Cited by 657
Tao, Y., Xie, X., Lv, W., Tang, D.-M., Kong, D., Huang, Z., Nishihara, H., Ishii, T., Li, B., Golberg, D., et al. (2013) · Scientific Reports · doi:10.1038/srep02975 · Cited by 628
Zhou, J., Lian, J., Hou, L., Zhang, J., Gou, H., Xia, M., Zhao, Y., Strobel, T. A., Tao, L., & Gao, F. (2015) · Nature Communications · doi:10.1038/ncomms9503 · Cited by 623
Li, Z., Gadipelli, S., Li, H., Howard, C. A., Brett, D. J. L., Shearing, P. R., Guo, Z., Parkin, I. P., & Li, F. (2020) · Nature Energy · doi:10.1038/s41560-020-0560-6 · Cited by 599
Rao, R., Pint, C. L., Islam, A. E., Weatherup, R. S., Hofmann, S., Meshot, E. R., Wu, F., Zhou, C., Dee, N., Amama, P. B., et al. (2018) · ACS Nano · doi:10.1021/acsnano.8b06511 · Cited by 588
Hierarchically porous and heteroatom doped carbon derived from tobacco rods for supercapacitors
Zhao, Y.-Q., Lu, M., Tao, P.-Y., Zhang, Y.-J., Gong, X.-T., Yang, Z., Zhang, G.-Q., & Li, H.-L. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.01.020 · Cited by 579
High‐Performance Pseudocapacitive Microsupercapacitors from Laser‐Induced Graphene
Li, L., Zhang, J., Peng, Z., Li, Y., Gao, C., Ji, Y., Ye, R., Kim, N. D., Zhong, Q., Yang, Y., et al. (2016) · Advanced Materials · doi:10.1002/adma.201503333 · Cited by 571
3D Graphene Materials: From Understanding to Design and Synthesis Control
Sun, Z., Fang, S., & Hu, Y. H. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00083 · Cited by 543
Nickel cobaltite as an emerging material for supercapacitors: An overview
Dubal, D. P., Gomez-Romero, P., Sankapal, B. R., & Holze, R. (2015) · Nano Energy · doi:10.1016/j.nanoen.2014.11.013 · Cited by 536
Fabrication of symmetric supercapacitors based on MOF-derived nanoporous carbons
Salunkhe, R. R., Kamachi, Y., Torad, N. L., Hwang, S. M., Sun, Z., Dou, S. X., Kim, J. H., & Yamauchi, Y. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta04277h · Cited by 481
Recent progress in metal-organic frameworks as active materials for supercapacitors
Wang, K.-B., Xun, Q., & Zhang, Q. (2020) · EnergyChem · doi:10.1016/j.enchem.2019.100025 · Cited by 474
Materials Design and System Construction for Conventional and New‐Concept Supercapacitors
Wu, Z., Li, L., Yan, J., & Zhang, X. (2017) · Advanced Science · doi:10.1002/advs.201600382 · Cited by 470
Characterization of MoS2–Graphene Composites for High-Performance Coin Cell Supercapacitors
Bissett, M. A., Kinloch, I. A., & Dryfe, R. A. W. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b04672 · Cited by 461
3D Freeze‐Casting of Cellular Graphene Films for Ultrahigh‐Power‐Density Supercapacitors
Shao, Y., El‐Kady, M. F., Lin, C., Zhu, G., Marsh, K. L., Hwang, J. Y., Zhang, Q., Li, Y., Wang, H., & Kaner, R. B. (2016) · Advanced Materials · doi:10.1002/adma.201506157 · Cited by 447
Structural design of graphene for use in electrochemical energy storage devices
Chen, K., Song, S., Liu, F., & Xue, D. (2015) · Chemical Society Reviews · doi:10.1039/c5cs00147a · Cited by 446
Hao, L., Ning, J., Luo, B., Wang, B., Zhang, Y., Tang, Z., Yang, J., Thomas, A., & Zhi, L. (2015) · Journal of the American Chemical Society · doi:10.1021/ja508693y · Cited by 438
Thick and freestanding MXene/PANI pseudocapacitive electrodes with ultrahigh specific capacitance
VahidMohammadi, A., Moncada, J., Chen, H., Kayali, E., Orangi, J., Carrero, C. A., & Beidaghi, M. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta05807e · Cited by 417
How Do Pseudocapacitors Store Energy? Theoretical Analysis and Experimental Illustration
Costentin, C., Porter, T. R., & Savéant, J.-M. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b14100 · Cited by 397
Fan, X., Yu, C., Yang, J., Ling, Z., Hu, C., Zhang, M., & Qiu, J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401761 · Cited by 381
Review of electric vehicle energy storage and management system: Standards, issues, and challenges
Hasan, M. K., Mahmud, M., Ahasan Habib, A. K. M., Motakabber, S. M. A., & Islam, S. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.102940 · Cited by 375
Long, C., Qi, D., Wei, T., Yan, J., Jiang, L., & Fan, Z. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201304269 · Cited by 358
Wang, J., Tang, J., Ding, B., Malgras, V., Chang, Z., Hao, X., Wang, Y., Dou, H., Zhang, X., & Yamauchi, Y. (2017) · Nature Communications · doi:10.1038/ncomms15717 · Cited by 351
Proton-conducting polymer electrolytes and their applications in solid supercapacitors: a review
Gao, H., & Lian, K. (2014) · RSC Adv. · doi:10.1039/c4ra05151c · Cited by 349
Vasudevan, R. K., Balke, N., Maksymovych, P., Jesse, S., & Kalinin, S. V. (2017) · Applied Physics Reviews · doi:10.1063/1.4979015 · Cited by 344
Zhang, L., Yang, X., Zhang, F., Long, G., Zhang, T., Leng, K., Zhang, Y., Huang, Y., Ma, Y., Zhang, M., et al. (2013) · Journal of the American Chemical Society · doi:10.1021/ja402552h · Cited by 340
Liu, M., Niu, J., Zhang, Z., Dou, M., & Wang, F. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.06.037 · Cited by 331
Biomass-Derived Carbon Fiber Aerogel as a Binder-Free Electrode for High-Rate Supercapacitors
Cheng, P., Li, T., Yu, H., Zhi, L., Liu, Z., & Lei, Z. (2016) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b11280 · Cited by 329
The Many Deaths of Supercapacitors: Degradation, Aging, and Performance Fading
Pameté, E., Köps, L., Kreth, F. A., Pohlmann, S., Varzi, A., Brousse, T., Balducci, A., & Presser, V. (2023) · Advanced Energy Materials · doi:10.1002/aenm.202301008 · Cited by 328
3D network of cellulose-based energy storage devices and related emerging applications
Dutta, S., Kim, J., Ide, Y., Ho Kim, J., Hossain, M. S. A., Bando, Y., Yamauchi, Y., & Wu, K. C.-W. (2017) · Materials Horizons · doi:10.1039/c6mh00500d · Cited by 323
Long, C., Jiang, L., Wu, X., Jiang, Y., Yang, D., Wang, C., Wei, T., & Fan, Z. (2015) · Carbon · doi:10.1016/j.carbon.2015.05.040 · Cited by 319
Lakshmi, K. C. S., & Vedhanarayanan, B. (2023) · Batteries · doi:10.3390/batteries9040202 · Cited by 316
Application of carbon materials in redox flow batteries
Chakrabarti, M. H., Brandon, N. P., Hajimolana, S. A., Tariq, F., Yufit, V., Hashim, M. A., Hussain, M. A., Low, C. T. J., & Aravind, P. V. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.12.038 · Cited by 306
Xu, X., Zhang, Y., Sun, H., Zhou, J., Yang, F., Li, H., Chen, H., Chen, Y., Liu, Z., Qiu, Z., et al. (2021) · Advanced Electronic Materials · doi:10.1002/aelm.202000967 · Cited by 305
Salunkhe, R. R., Tang, J., Kobayashi, N., Kim, J., Ide, Y., Tominaka, S., Kim, J. H., & Yamauchi, Y. (2016) · Chemical Science · doi:10.1039/c6sc01429a · Cited by 301
Graphene-based materials for high-voltage and high-energy asymmetric supercapacitors
Zheng, S., Wu, Z.-S., Wang, S., Xiao, H., Zhou, F., Sun, C., Bao, X., & Cheng, H.-M. (2017) · Energy Storage Materials · doi:10.1016/j.ensm.2016.10.003 · Cited by 301
Bu, Y., Sun, T., Cai, Y., Du, L., Zhuo, O., Yang, L., Wu, Q., Wang, X., & Hu, Z. (2017) · Advanced Materials · doi:10.1002/adma.201700470 · Cited by 295
Liu, Y., He, X., Hanlon, D., Harvey, A., Coleman, J. N., & Li, Y. (2016) · ACS Nano · doi:10.1021/acsnano.6b04577 · Cited by 285
Formulation of Ionic‐Liquid Electrolyte To Expand the Voltage Window of Supercapacitors
Van Aken, K. L., Beidaghi, M., & Gogotsi, Y. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201412257 · Cited by 278
Self-citationToward a molecular design of porous carbon materials
Borchardt, L., Zhu, Q.-L., Casco, M. E., Berger, R., Zhuang, X., Kaskel, S., Feng, X., & Xu, Q. (2017) · Materials Today · doi:10.1016/j.mattod.2017.06.002 · Cited by 266
Gao, B., Li, X., Ding, K., Huang, C., Li, Q., Chu, P. K., & Huo, K. (2019) · Journal of Materials Chemistry A · doi:10.1039/c8ta05760e · Cited by 266
Hybrid energy storage devices: Advanced electrode materials and matching principles
Tie, D., Huang, S., Wang, J., Ma, J., Zhang, J., & Zhao, Y. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2018.12.018 · Cited by 257
Zhang, Z., Xiao, F., & Wang, S. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta02331a · Cited by 254
Wang, X., Yun, S., Fang, W., Zhang, C., Liang, X., Lei, Z., & Liu, Z. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b01334 · Cited by 187
Wang, J., Luo, X., Young, C., Kim, J., Kaneti, Y. V., You, J., Kang, Y.-M., Yamauchi, Y., & Wu, K. C.-W. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b01792 · Cited by 122
Liu, X., Wen, Y., Chen, X., Tang, T., & Mijowska, E. (2020) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.138055 · Cited by 117
Metadata
- Authors
- Simon, P., & Gogotsi, Y.
- Venue
- Accounts of Chemical Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2012-06-06
- Volume
- 46
- Issue
- 5
- Pages
- 1094-1103
- ISSN
- 0001-4842 (ISSN-L)
- 1520-4898
- OpenAlex
- W2063065493
- Cited by
- 1,486
- References
- 1
- FWCI
- 39.95
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.