Morphology of Elastic Poly(l-lactide-co-ε-caprolactone) Copolymers and in Vitro and in Vivo Degradation Behavior of Their Scaffolds
The DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
Abstract
Very elastic PLCL [poly(L-lactide-co-epsilon-caprolactone), 50:50] copolymers were synthesized and extruded into porous tubular scaffolds (pore size 150 +/- 50 microm, porosity 90%) for the application to tissue engineering. The copolymers were basically random and amorphous. However, two T(g)'s (glass transition temperatures) were observed in dynamic mechanical thermal analysis and also in differential scanning calorimetry thermograms. Furthermore, microdomains (about 17 nm in size) were indicated on the small-angle X-ray scattering profile and finally confirmed by transmission electron microscopy. Therefore, the PLCL copolymer was probably composed of a soft matrix of mainly epsilon-caprolactone moieties and hard domains containing more L-lactide units to exhibit a rubberlike elasticity in virtue of the physically cross-linked structure. The smooth muscle cells seeded scaffolds were implanted into nude mice subcutaneously for up to 15 weeks to monitor the in vivo degradation. In addition, they were degraded in vitro in phosphate buffer solution (pH 7.4) for up to 1 year to compare the results each other. All the scaffolds degraded slowly in vivo and in vitro even in the form of a highly porous thin membrane. However, the degradation rate was somewhat faster for in vivo than for in vitro. This should be explained by enzymes that might have played a certain role in the degradation in the body. In addition, the epsilon-caprolactone moieties degraded faster than the L-lactide units did in these PLCL scaffolds, although their hydrophilicities are in the opposite order. This behavior appeared more prominently in the in vivo case. This should result from that the amorphous regions composed of mainly epsilon-caprolactone units might have been first attacked by water because water can penetrate into the amorphous regions easier than the hard domains containing more L-lactides.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Additionally, the scaffolds had 200% higher elongation at break values than their homopolymers, which indicates the advantages of copolymerizing LA and CL to make flexible and soft copolymer scaffolds.”
From Green Copolymers Based on Poly(Lactic Acid)—Short Review (2021) · cites this paper as [76]
In the citing paper
“The DMA profile indicated two Tgs: one at −38 °C and a second at −11 °C.”
From Green Copolymers Based on Poly(Lactic Acid)—Short Review (2021) · cites this paper as [76]
In the citing paper
“No crystalline melting peak was observed, which shows that the PLCL random copolymer is amorphous.”
From Green Copolymers Based on Poly(Lactic Acid)—Short Review (2021) · cites this paper as [76]
In the citing paper
“Regarding thermal properties, tubular scaffolds made of poly(L-lactide-co-ε-caprolactone) (PLCL) (50:50) random copolymers were synthesized, and DSC analysis showed two potential glass transition temperatures (Tg) of the scaffolds in the 0 to −40 °C region.”
From Green Copolymers Based on Poly(Lactic Acid)—Short Review (2021) · cites this paper as [76]
In the citing paper
“PCL and PLA homopolymers had higher Tg: −60 °C and +50 °C, respectively.”
From Green Copolymers Based on Poly(Lactic Acid)—Short Review (2021) · cites this paper as [76]
2 more claims about this paper
Create a free account to see every claim other papers make about this one.
Citations
Cites
Synthetic biodegradable polymers as orthopedic devices
Middleton, J. C., & Tipton, A. J. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00101-0 · Cited by 2,741
(2016) · CRC Press eBooks · doi:10.1201/b12801 · Cited by 2,031
Functional Arteries Grown in Vitro
Niklason, L. E., Gao, J., Abbott, W. M., Hirschi, K. K., Houser, S., Marini, R., & Langer, R. (1999) · Science · doi:10.1126/science.284.5413.489 · Cited by 1,766
Pitt, G. G., Gratzl, M. M., Kimmel, G. L., Surles, J., & Sohindler, A. (1981) · Biomaterials · doi:10.1016/0142-9612(81)90060-0 · Cited by 857
Cyclic mechanical strain regulates the development of engineered smooth muscle tissue
Kim, B.-S., Nikolovski, J., Bonadio, J., & Mooney, D. J. (1999) · Nature Biotechnology · doi:10.1038/13671 · Cited by 491
Self-citationBiodegradable polymers for biomedical uses
Hayashi, T. (1994) · Progress in Polymer Science · doi:10.1016/0079-6700(94)90030-2 · Cited by 341
Frontiers in Tissue Engineering: In Vitro Modulation of Chondrogenesis
Freed, L. E., Martin, I., & Vunjak-Novakovic, G. (1999) · Clinical Orthopaedics and Related Research · doi:10.1097/00003086-199910001-00006 · Cited by 285
Selective Enzymatic Degradations of Poly(l-lactide) and Poly(ε-caprolactone) Blend Films
Liu, L., Li, S., Garreau, H., & Vert, M. (2000) · Biomacromolecules · doi:10.1021/bm000046k · Cited by 272
Frontiers in Tissue Engineering
(1998) · Elsevier eBooks · doi:10.1016/b978-0-08-042689-1.x5001-8 · Cited by 258
Reusch, P., Wagdy, H., Reusch, R., Wilson, E., & Ives, H. E. (1996) · Circulation Research · doi:10.1161/01.res.79.5.1046 · Cited by 233
Research works printed but not linked: 4
- Langer R., 1998, Nature, 392, 5
- Pack J. W., 2002, J. Polym. Sci., Polym. Chem. Ed., 40, 554
- Matsui T., 1993, J. Jpn. Soc. Biomater., 11, 330
- Ye W. P., 1997, Funtional. Polym., 32, 161
Cited by
Items 101–182 of 182
Inkinen, S., Stolt, M., & Södergård, A. (2010) · Biomacromolecules · doi:10.1021/bm901338n · Cited by 24
Jia, Q. F., Xia, Y., Yin, S., et al. (2016) · International Journal of Polymeric Materials · doi:10.1080/00914037.2016.1233416 · Cited by 21
Xie, J., Jung, Y., Kim, S. H., Kim, Y. H., & Matsuda, T. (2006) · Tissue Engineering · doi:10.1089/ten.2006.12.1811 · Cited by 21
Self-citationBiodegradable fiducial markers for X-ray imaging – soft tissue integration and biocompatibility
Górecka, Ż., Teichmann, J., Nitschke, M., Chlanda, A., Choińska, E., Werner, C., & Święszkowski, W. (2016) · Journal of Materials Chemistry B · doi:10.1039/c6tb01001f · Cited by 20
Li, W., Wu, P., Zhang, Y., Midgley, A. C., Yuan, X., Wu, Y., Wang, L., Wang, Z., Zhu, M., & Kong, D. (2019) · ACS Applied Bio Materials · doi:10.1021/acsabm.9b00641 · Cited by 20
Lakshmanan, R., Krishnan, U. M., & Sethuraman, S. (2015) · Nanomedicine · doi:10.2217/nnm.15.143 · Cited by 20
Prabhath, A., Vernekar, V. N., Vasu, V., Badon, M. A., Avochinou, J., Asandei, A. D., Kumbar, S. G., Weber, E., & Laurencin, C. T. (2021) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.37200 · Cited by 25
Lee, B. R., Shafiq, M., Jung, Y., et al. (2016) · Macromolecular Research · doi:10.1007/s13233-016-4017-5 · Cited by 19
Self-citationRuppert, D. S., Mohammed, M. M., Ibrahim, M. M., Bachtiar, E. O., Erning, K., Ansari, K., Everitt, J. I., Brown, D. A., Klitzman, B. M., Koshut, W. J., et al. (2021) · Wound Repair and Regeneration · doi:10.1111/wrr.12951 · Cited by 22
Rahul, V. G., Wilson, J., Thomas, L. V., & Nair, P. D. (2022) · ACS Omega · doi:10.1021/acsomega.1c06679 · Cited by 18
Deng, F., Bu, Z., Hu, H., Huang, X., Liu, Z., & Ning, C. (2022) · Applied Materials Today · doi:10.1016/j.apmt.2022.101433 · Cited by 19
Hou, Z., Zhang, H., Qu, W., Xu, Z., & Han, Z. (2016) · International Journal of Polymeric Materials · doi:10.1080/00914037.2016.1180612 · Cited by 20
Li, H., Liu, C., Xu, Q., Lu, C., Yang, G., Wang, F., Nie, J., Hu, X., Dong, N., & Shi, J. (2019) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2019.04.008 · Cited by 17
Kampleitner, C., Changi, K., Felfel, R. M., Scotchford, C. A., Sottile, V., Kluger, R., Hoffmann, O., Grant, D. M., & Epstein, M. M. (2020) · Biomaterials Science · doi:10.1039/c9bm01827a · Cited by 17
Ahola, N., Veiranto, M., Rich, J., Efimov, A., Hannula, M., Seppälä, J. V., & Kellomäki, M. (2012) · Journal of Biomaterials Applications · doi:10.1177/0885328212462258 · Cited by 21
“3 corresponds to a group that is bonded to another "caprolactone group.(33,34) The NMR results showed that the ratio of integrals for these two signals, and therefore the comonomer ratio, changed as the hydrolysis proceeded.”
BackgroundInfluentialTsuji, H. (2022) · Wiley eBooks · doi:10.1002/9781119767480.ch21 · Cited by 23
Wu, S., Bian, C., Li, X., Chen, M., Yang, J., Jin, Y., Shen, Y., & Cheng, L. (2021) · Journal of Controlled Release · doi:10.1016/j.jconrel.2021.03.023 · Cited by 17
D'Angelo, N. A., Câmara, M. C. C., Noronha, M. A., Grotto, D., Chorilli, M., Lourenço, F. R., Rangel‐Yagui, C. D. O., & Lopes, A. M. (2021) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2021.118166 · Cited by 18
Ghosh, S., Glöckler, E., Wölper, C., Tjaberings, A., Gröschel, A. H., & Schulz, S. (2020) · Dalton Transactions · doi:10.1039/d0dt02831b · Cited by 18
A new hydrophilic biodegradable ureteral stent restrain encrustation both in vitro and in vivo
Zhang, Y., He, J., Chen, H., & Xiong, C. (2020) · Journal of Biomaterials Applications · doi:10.1177/0885328220949376 · Cited by 15
“According to previous reports, water could penetrate into the amorphous regions composed of mainly Ɛ-caprolactone units easier than the hard domains.(45) As consequence, the hydrolysis rate of Ɛ-caprolactone, soft segment, was accelerated, which was shown by a decrease in elasticity.”
BackgroundJeong, S. I., Lee, Y. M., Lee, J.-H., Shin, Y. M., Shin, H., Lim, Y., & Nho, Y. C. (2008) · Macromolecular Research · doi:10.1007/bf03218843 · Cited by 15
Self-citationMiyasako, H., Yamamoto, K., Nakao, A., & Aoyagi, T. (2007) · Macromolecular Bioscience · doi:10.1002/mabi.200600188 · Cited by 14
Fibroblast culture on poly(L-lactide-co-ɛ-caprolactone) an electrospun nanofiber sheet
Jang, B. S., Jung, Y., Kwon, I. K., Mun, C. H., & Kim, S. H. (2012) · Macromolecular Research · doi:10.1007/s13233-012-0180-5 · Cited by 17
Self-citationAhola, N., Veiranto, M., Männistö, N., et al. (2012) · Biomatter · doi:10.4161/biom.22793 · Cited by 13
“A similar effect has also been reported by In Jeong et al.31 The microstructure of the copolymer was also studied similarly to what was presented in our accompanying study.1 It was done according to Herbert32 and Fernández.33 The results of the average sequence length calculations showed the expected results based on…”
ResultA Novel Seamless Elastic Scaffold for Vascular Tissue Engineering
Kim, S., Chung, E., Kim, S. H., Jung, Y., Kim, Y. H., & Kim, S. H. (2010) · Journal of Biomaterials Science Polymer Edition · doi:10.1163/156856209x415792 · Cited by 13
Self-citationSustained Antibiotic-Eluting Intra-Ocular Lenses: A New Approach
Tan, D. W. N., Lim, S. G., Wong, T. T. L., & Venkatraman, S. S. (2016) · PLoS ONE · doi:10.1371/journal.pone.0163857 · Cited by 13
Zhu, W., Sun, S., Xu, N., & Shen, Z. (2011) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.24956 · Cited by 14
Liao, G., Jiang, K., Jiang, S., & Xia, H. (2010) · Journal of Macromolecular Science Part A · doi:10.1080/10601325.2010.511534 · Cited by 14
Huber, A., Boruch, A. V., Nieponice, A., Jiang, H., Medberry, C. J., & Badylak, S. F. (2011) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.32503 · Cited by 15
Biodegradable implantable balloons: Mechanical stability under physiological conditions
Zada, M. H., Kumar, A., Elmalak, O., Markovitz, E., Icekson, R., Machlev, E., Mechrez, G., & Domb, A. J. (2019) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2019.103404 · Cited by 12
Reconstruction of Vascular and Urologic Tubular Grafts by Tissue Engineering
Caneparo, C., Chabaud, S., & Bolduc, S. (2021) · Processes · doi:10.3390/pr9030513 · Cited by 13
Hernandez‐Montero, N., Ugartemendia, J. M., Amestoy, H., & Sarasua, J.-R. (2013) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.23394 · Cited by 10
Regeneration of Articular Cartilage Using Membranes of Polyester Scaffolds in a Rabbit Model
Baranowski, M., Wasyłeczko, M., Kosowska, A., Plichta, A., Kowalczyk, S., Chwojnowski, A., Bielecki, W., & Czubak, J. (2022) · Pharmaceutics · doi:10.3390/pharmaceutics14051016 · Cited by 14
“We suspect that PLCA copolymer degrades in the body mostly through the hydrolytic degradation [69].”
BackgroundSaeheng, C., Fuongfuchat, A., Sriyai, M., Daranarong, D., Namhongsa, M., Molloy, R., Meepowpan, P., & Punyodom, W. (2022) · Journal of Applied Polymer Science · doi:10.1002/app.53091 · Cited by 10
Tissue Engineering for Penile Reconstruction
Elia, E., Caneparo, C., McMartin, C., Chabaud, S., & Bolduc, S. (2024) · Bioengineering · doi:10.3390/bioengineering11030230 · Cited by 11
“In addition, the environment is inadequate for the differentiation and organization of epithelial cells, which can lead to non-or poorly functioning tissue, allowing the passage of urine through the tissue and, therefore, the formation of stenosis through inflammation and the graft [97,98].”
BackgroundGraulus, G., Herck, N. V., Hecke, K. V., Driessche, G. V., Devreese, B. V., Thienpont, H., Ottevaere, H., Vlierberghe, S. V., & Dubruel, P. (2018) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2018.04.014 · Cited by 11
Potential of Different Tissue Engineering Strategies in the Bladder Reconstruction
Bouhout, S., Rousseau, A., St�phane, C., Morissette, A., & Bolduc, S. (2013) · InTech eBooks · doi:10.5772/55838 · Cited by 11
Characterization and preparation of bioinspired resorbable conduits for vascular reconstruction
Yang, S.-K., Shafiq, M., Kim, D., Park, C., Jung, Y., & Hyun, S. (2016) · Macromolecular Research · doi:10.1007/s13233-016-4042-4 · Cited by 9
Ay, B., Karaöz, E., Kesemenlı, C. C., & Kenar, H. (2016) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35948 · Cited by 9
Florczak, M., & Duda, A. (2008) · Angewandte Chemie · doi:10.1002/ange.200803540 · Cited by 9
Application of PLCL as a biodegradable polymer in biomedical engineering
Zhao, Y., & Liu, H. (2026) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-026-07016-3 · Cited by 7
“The rigid molecular skeleton of L-lactide makes the material more susceptible to hydrolysis reactions, and higher L-lactide content usually accelerates the degradation process [39].”
Zhang, N., Lu, Y., Li, J., Xiao, Z., Liu, Y., Liu, Y., Wang, Z., Wang, Z., Li, X., Zhang, H., et al. (2025) · Acta Biomaterialia · doi:10.1016/j.actbio.2025.07.048 · Cited by 8
Microinjection Molded Biopolymeric Airway Stent with Antibacterial and Anti‐Hyperplastic Properties
Dong, J., Li, Y., Wang, X., et al. (2023) · Macromolecular Bioscience · doi:10.1002/mabi.202300113 · Cited by 6
Resorbable polymers for medical applications
Kim, S., & Jung, Y. (2013) · Elsevier eBooks · doi:10.1533/9780857095602.1.91 · Cited by 8
Self-citationBrannigan, R. P., & Heise, A. (2019) · European Polymer Journal · doi:10.1016/j.eurpolymj.2019.109417 · Cited by 6
The Delivery Materials with Chemotherapy Drugs for Treatment of the Positive Margin in Solid Tumors
Zhu, Y., Liu, S., Feng, C., Liu, C. X., Wang, Z., Yu, K., Wang, J., & Zeng, X. (2020) · Tissue Engineering Part A · doi:10.1089/ten.tea.2020.0076 · Cited by 4
“17 Gemcitabine (GEM) is a cytosine arabinoside analog, which can significantly inhibit tumor cell proliferation.”
Synthesis of Grafted Biodegradable Poly(ε-caprolactone) as Antibacterial and Antifungal Agent
Benguella, S., Hachemaoui, A., Yahiaoui, A. A., & Dehbi, A. (2020) · Polymer Science Series B · doi:10.1134/s1560090420060019 · Cited by 4
Guan, J., Stankus, J. J., & Wagner, W. R. (2006) · Wiley eBooks · doi:10.1002/9780471740360.ebs1359 · Cited by 4
Design and Ex Vivo Evaluation of a PCLA Degradable Device To Improve Annulus Fibrosus Repair
Falcoz, C., Chaaban, M., Paniagua, C., Fusellier, M., Guicheux, J., Visage, C. L., Nottelet, B., Garric, X., & Pinese, C. (2025) · ACS Applied Bio Materials · doi:10.1021/acsabm.4c01415 · Cited by 3
Tâm, T. T. M., Todo, M., Cheong, K. Y., & Hamid, Z. A. A. (2020) · AIP conference proceedings · doi:10.1063/5.0017437 · Cited by 3
Spectroscopic and Morphology Studies of Biodegradable Nanolamellar Lactone Based Triblocks
Kasyapi, N., & Bhowmick, A. K. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp506574x · Cited by 3
Aranha, M. D. C., Alencar, L. M. R., Souto, E. B., Kamei, D. T., & Lopes, A. M. (2024) · Pharmaceuticals · doi:10.3390/ph17091177 · Cited by 2
Body-Shaping Membrane to Regenerate Breast Fat by Elastic Structural Holding
Kim, H.-S., Park, J., Ha, H., Baek, S., Lee, C. H., Lee, K., Park, S., Kim, J.-E., Yi, S. W., & Sung, H. (2023) · Research · doi:10.34133/research.0137 · Cited by 3
Small Diameter Vascular Grafts Made in Minutes
Peters, M. M., Atrott, K., Zorndt, D., Meier, D., Emmert, M. Y., Lee, Y., Wang, Y., Robmann, S., Hoerstrup, S. P., Generali, M., et al. (2026) · Advanced Materials · doi:10.1002/adma.202509353 · Cited by 1
Self-citationChang, S. S., Igai, H., Misaki, N., Gotoh, M., Yamamoto, Y., Tabata, Y., & Yokomise, H. (2008) · ASAIO Journal · doi:10.1097/mat.0b013e318160cffa · Cited by 1
Lee, Y. S., Cho, S. Y., Kim, H. W., et al. (2009) · Korean journal of urology · doi:10.4111/kju.2009.50.3.282 · Cited by 1
“PCL nano-sheet는 생흡수성 재료 의 하나로 electrospining 방법에 의해 제조된 nano-fibrous scaffolds로 생체의 세포외기질 (extracellular matrix)과 유사 한 구조를 가지며 유연성이 뛰어나 방광을 대치할 수 있는 지지체로 평가된다.(23) 하지만 지지체만 사용하여 방광 대치 술이나 방광 재생을 실험했을 때 담체는 이물질이기 때문 에 소변과 장시간 접촉하게 되면 결석 형성과 염증반응, 이 식편 수축, 저장 용량 감소, 섬유모세포 (fibroblast) 침착 등 의 문제가 보고되어(24) 지지체만으로는 체내에서 장시…”
Self-citationPaulo, S. (2006) · Cited by 1
Biodegradability of lactide–caprolactone macromonomers in wastewater
Moore, R. K., Gleisner, R., & Houtman, C. J. (2021) · BioResources · doi:10.15376/biores.16.2.4081-4092 · Cited by 1
“Lactide and caprolactone polymers assist in the advancement of medical applications (Ma et al. 2012), i.e., joint replacements, drug delivery systems, and scaffolds for tissue engineering (Jeong et al. 2004).”
BackgroundTâm, T. T. M., Hamid, Z. A. A., Cheong, K. Y., & Todo, M. (2022) · Materials Today Proceedings · doi:10.1016/j.matpr.2022.07.070 · Cited by 1
Li, M., Zhou, J., Wang, L., Zhijun, C., Dai, S., Jiangkai, S., Yangang, S., Shengmei, Q., & Ge, J. (2022) · Materials & Design · doi:10.1016/j.matdes.2022.111197 · Cited by 1
Leon‐Valdivieso, C. Y., Béthry, A., Pinese, C., Dai, M., Pompée, C., Pernot, J., & Garric, X. (2024) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.37805 · Cited by 2
Sriyai, M., Chaiwon, T., Meepowpan, P., Molloy, R., Nalampang, K., Worajittiphon, P., Kaabbuatong, N., & Punyodom, W. (2025) · Polymer Bulletin · doi:10.1007/s00289-025-05735-1 · Cited by 1
Narita, T., & Osawa, S. (2009) · KOBUNSHI RONBUNSHU · doi:10.1295/koron.66.164 · Cited by 1
A synthetic biomaterials approach to the prevention of postsurgical adhesions in neurosurgery
Florek, C. (2010) · Rutgers University Community Repository (Rutgers University) · doi:10.7282/t3gf0t8f · Cited by 2
“When exposed to humidity, poly(ethylene-co-vinyl alcohol) and poly(lactideco-ε-caprolactone) have Tgs well below body temperature (-10 to -60 °C) [219, 220], so devices fabricated from these polymers would have poor dimensional stability due to polymer chain mobility.”
BackgroundCharacterization of the Gel-Spun Tubular Scaffold for Cardiovascular Tissue Engineering
Chung, E. N., Kim, S., Ko, Y. G., Kwon, J. H., Han, J. W., Park, I., Han, S., & Kim, S. H. (2007) · Key engineering materials · doi:10.4028/www.scientific.net/kem.342-343.321
Self-citationFabrication of PCL scaffold using autoadhesion phenomenon
Lee, S. H., 안상현, 조영삼, & 최기평 (2012) · Journal of the Korean Society of Mechanical Technology · doi:10.17958/ksmt.14.2.201204.25
Kim, S., Jung, Y., Kim, Y. H., & Kim, S. H. (2012) · Pan Stanford Publishing eBooks · doi:10.1201/b11625-34
Self-citationRahman, W. A., Six, J., & Nouvel, C. (2012)
Chapanian, R. (2009) · QSpace (Queen's University Library)
Hybrid bioengineering of tubular constructs for esophagus by melt-drawing and 3D bioprinting
Tan, Y. J. (2018) · DR-NTU (Nanyang Technological University) · doi:10.32657/10356/73186 · Cited by 2
Novák, M., Jambor, R., Růžičková, Z., & Podzimek, Š. (2021) · New Journal of Chemistry · doi:10.1039/d0nj05498d
Engineering Biomaterials and Biomolecules for Vascular Regeneration
Huang, F. (2016) · eScholarship (California Digital Library)
Regenerative medicine relating to urethroplasty
Saad, S., & Chapple, C. R. (2022) · Elsevier eBooks · doi:10.1016/b978-0-323-91199-3.00004-9
Xie, J., Jung, Y., Kim, S. H., et al. (2006) · Tissue Engineering · doi:10.1089/ten.2006.12.ft-92
Self-citationMultifunctional 3D Printed Thermoplastic Biopolyesters
Wahbi, M., France, K. J. D., & Kontopoulou, M. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-95486-0.00075-2
A degradable nanofibrous scaffold of poly(ε-Caprolactone-co-Lactide) for annulus fibrosus repairPreprint
Chaaban, M., Falcoz, C., Decante, C., et al. (2025) · bioRxiv (Cold Spring Harbor Laboratory) · doi:10.64898/2025.11.30.691409
Exploring better methods for treating urethral stricture caused by lichen sclerosus
An, J.-Q., & Wang, J.-W. (2026) · Asian Journal of Andrology · doi:10.4103/aja202597 · Cited by 1
“48,49 To prevent fibrosis and stenosis around the scaffold, promote cell transplantation and proliferation, and minimize the foreign body reaction against the scaffold, natural materials such as collagens, elastin, laminin β1 chain, or growth factors can be incorporated into the synthetic matrix.”
Gong, L., Zhang, Y., Xu, E., Lu, H., Duan, J., & Bao, J. (2026) · Polymer Engineering and Science · doi:10.1002/pen.70520 · Cited by 1
Zhang, N., Lyu, Y., Li, J., Liu, Y., Zou, Z., Ren, K., Zhao, N., Li, Z., Li, Y., Wang, X., et al. (2026) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2026.115716
Park, S. J., Lee, J., Jang, S., et al. (2026) · Advanced Electronic Materials · doi:10.1002/aelm.70470
“PLCL exhibited mechanical flexibility due to physical crosslinking, allowing it to withstand post-drawing while maintaining the capacity for subsequent elongation [ 21 ].”
Slatinek, T., Plohl, O., & Črešnar, K. P. (2026) · Biomaterials Advances · doi:10.1016/j.bioadv.2026.215179 · Cited by 1
Wang, Z., Zhou, H., Wang, H., Chen, X., Yang, L., & Liang, C. (2026) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.70159
Metadata
- Authors
- Jeong, S. I., Kim, B.-S., Lee, Y. M., Ihn, K. J., Kim, S. H., & Kim, Y. H.
- Affiliations
- Kangwon National University (KR)
- Corresponding author
- Kim, Soo Hyun
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2004-05-14
- Volume
- 5
- Issue
- 4
- Pages
- 1303-1309
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W2122538859
- Semantic Scholar
- a04a50c09052d96caaa3814487d28f4f34ae12e5
- Cited by
- 182
- References
- 23
- Citations by year
- 2026: 8 · 2025: 5 · 2024: 5 · 2023: 9 · 2022: 9 · 2021: 14 · 2020: 10 · 2019: 12 · 2018: 8 · 2017: 3 · 2016: 13 · 2015: 4 · 2014: 6 · 2013: 10 · 2012: 10
- FWCI
- 4.00
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- Seoul National University Open Repository (Seoul National University) (submittedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Engineering › Biomedical Engineering › Bone Tissue Engineering Materials
- Health Sciences › Medicine › Surgery › Tissue Engineering and Regenerative Medicine
- Keywords
- poly(L-lactide-co-ε-caprolactone), tissue engineering scaffolds, polymer morphology, microdomains, glass transition temperature, physical crosslinking, in vivo degradation, in vitro degradation, smooth muscle cells, water-induced degradation, hydrophilicity
- MeSH terms
- Animals, Biocompatible Materials, Biodegradation, Environmental, Caproates, Elasticity, Lactones, Materials Testing, Mice, Nude, Polyesters, Surface Properties, Temperature, Time Factors, Molecular Structure, Mice
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.