Morphology of Elastic Poly(l-lactide-co-ε-caprolactone) Copolymers and in Vitro and in Vivo Degradation Behavior of Their Scaffolds
The DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
Abstract
Very elastic PLCL [poly(L-lactide-co-epsilon-caprolactone), 50:50] copolymers were synthesized and extruded into porous tubular scaffolds (pore size 150 +/- 50 microm, porosity 90%) for the application to tissue engineering. The copolymers were basically random and amorphous. However, two T(g)'s (glass transition temperatures) were observed in dynamic mechanical thermal analysis and also in differential scanning calorimetry thermograms. Furthermore, microdomains (about 17 nm in size) were indicated on the small-angle X-ray scattering profile and finally confirmed by transmission electron microscopy. Therefore, the PLCL copolymer was probably composed of a soft matrix of mainly epsilon-caprolactone moieties and hard domains containing more L-lactide units to exhibit a rubberlike elasticity in virtue of the physically cross-linked structure. The smooth muscle cells seeded scaffolds were implanted into nude mice subcutaneously for up to 15 weeks to monitor the in vivo degradation. In addition, they were degraded in vitro in phosphate buffer solution (pH 7.4) for up to 1 year to compare the results each other. All the scaffolds degraded slowly in vivo and in vitro even in the form of a highly porous thin membrane. However, the degradation rate was somewhat faster for in vivo than for in vitro. This should be explained by enzymes that might have played a certain role in the degradation in the body. In addition, the epsilon-caprolactone moieties degraded faster than the L-lactide units did in these PLCL scaffolds, although their hydrophilicities are in the opposite order. This behavior appeared more prominently in the in vivo case. This should result from that the amorphous regions composed of mainly epsilon-caprolactone units might have been first attacked by water because water can penetrate into the amorphous regions easier than the hard domains containing more L-lactides.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Additionally, the scaffolds had 200% higher elongation at break values than their homopolymers, which indicates the advantages of copolymerizing LA and CL to make flexible and soft copolymer scaffolds.”
From Green Copolymers Based on Poly(Lactic Acid)—Short Review (2021) · cites this paper as [76]
In the citing paper
“The DMA profile indicated two Tgs: one at −38 °C and a second at −11 °C.”
From Green Copolymers Based on Poly(Lactic Acid)—Short Review (2021) · cites this paper as [76]
In the citing paper
“No crystalline melting peak was observed, which shows that the PLCL random copolymer is amorphous.”
From Green Copolymers Based on Poly(Lactic Acid)—Short Review (2021) · cites this paper as [76]
In the citing paper
“Regarding thermal properties, tubular scaffolds made of poly(L-lactide-co-ε-caprolactone) (PLCL) (50:50) random copolymers were synthesized, and DSC analysis showed two potential glass transition temperatures (Tg) of the scaffolds in the 0 to −40 °C region.”
From Green Copolymers Based on Poly(Lactic Acid)—Short Review (2021) · cites this paper as [76]
In the citing paper
“PCL and PLA homopolymers had higher Tg: −60 °C and +50 °C, respectively.”
From Green Copolymers Based on Poly(Lactic Acid)—Short Review (2021) · cites this paper as [76]
2 more claims about this paper
Create a free account to see every claim other papers make about this one.
Citations
Cites
Synthetic biodegradable polymers as orthopedic devices
Middleton, J. C., & Tipton, A. J. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00101-0 · Cited by 2,741
(2016) · CRC Press eBooks · doi:10.1201/b12801 · Cited by 2,031
Functional Arteries Grown in Vitro
Niklason, L. E., Gao, J., Abbott, W. M., Hirschi, K. K., Houser, S., Marini, R., & Langer, R. (1999) · Science · doi:10.1126/science.284.5413.489 · Cited by 1,766
Pitt, G. G., Gratzl, M. M., Kimmel, G. L., Surles, J., & Sohindler, A. (1981) · Biomaterials · doi:10.1016/0142-9612(81)90060-0 · Cited by 857
Cyclic mechanical strain regulates the development of engineered smooth muscle tissue
Kim, B.-S., Nikolovski, J., Bonadio, J., & Mooney, D. J. (1999) · Nature Biotechnology · doi:10.1038/13671 · Cited by 491
Self-citationBiodegradable polymers for biomedical uses
Hayashi, T. (1994) · Progress in Polymer Science · doi:10.1016/0079-6700(94)90030-2 · Cited by 341
Frontiers in Tissue Engineering: In Vitro Modulation of Chondrogenesis
Freed, L. E., Martin, I., & Vunjak-Novakovic, G. (1999) · Clinical Orthopaedics and Related Research · doi:10.1097/00003086-199910001-00006 · Cited by 285
Selective Enzymatic Degradations of Poly(l-lactide) and Poly(ε-caprolactone) Blend Films
Liu, L., Li, S., Garreau, H., & Vert, M. (2000) · Biomacromolecules · doi:10.1021/bm000046k · Cited by 272
Frontiers in Tissue Engineering
(1998) · Elsevier eBooks · doi:10.1016/b978-0-08-042689-1.x5001-8 · Cited by 258
Reusch, P., Wagdy, H., Reusch, R., Wilson, E., & Ives, H. E. (1996) · Circulation Research · doi:10.1161/01.res.79.5.1046 · Cited by 233
Enzymatic degradation of poly(ε-caprolactone)/poly(dl-lactide) blends in phosphate buffer solution
Gan, Z., Yu, D., Zhong, Z., Liang, Q., & Jing, X. (1999) · Polymer · doi:10.1016/s0032-3861(98)00549-7 · Cited by 217
Stretch affects phenotype and proliferation of vascular smooth muscle cells
Birukov, K. G., Shirinsky, V. P., Stepanova, O. V., Tkachuk, V. A., Hahn, A. W. A., Resink, T. J., & Smirnov, V. N. (1995) · Molecular and Cellular Biochemistry · doi:10.1007/bf00944392 · Cited by 205
(Co)polymers of L‐lactide, 2. Mechanical properties
Grijpma, D. W., & Pennings, A. J. (1994) · Macromolecular Chemistry and Physics · doi:10.1002/macp.1994.021950516 · Cited by 191
Elastic biodegradable poly(glycolide‐co‐caprolactone) scaffold for tissue engineering
Lee, S., Kim, B., Kim, S. H., Choi, S. W., Jeong, S. I., Kwon, I. K., Kang, S. W., Nikolovski, J., Mooney, D. J., Han, Y., et al. (2003) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.10497 · Cited by 190
Self-citationScaffolds for Engineering Smooth Muscle Under Cyclic Mechanical Strain Conditions
Kim, B.-S., & Mooney, D. J. (2000) · Journal of Biomechanical Engineering · doi:10.1115/1.429651 · Cited by 174
Self-citationGrijpma, D. W., Zondervan, G. J., & Pennings, A. J. (1991) · Polymer Bulletin · doi:10.1007/bf00316902 · Cited by 170
Dong, C.-M., Qiu, K.-Y., Gu, Z.-W., & Feng, X.-D. (2001) · Macromolecules · doi:10.1021/ma010005w · Cited by 161
Synthesis, characterization and degradation of ABA block copolymer of l-lactide and ε-caprolactone
Qian, H., Bei, J., & Wang, S. (2000) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(00)00031-8 · Cited by 152
A new resorbable monofilament suture
Tomihata, K., Suzuki, M., Oka, T., et al. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(97)00183-3 · Cited by 116
Block and random copolymers of ε-caprolactone
Duda, A., Biela, T., Libiszowski, J., Penczek, S., Dúbois, P., Mecerreyes, D., & Jérôme, R. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(97)00167-5 · Cited by 115
Synthesis and evaluation of biodegradable block copolymers of ε‐caprolactone and DL ‐lactide
Feng, X., Song, C. X., & Chen, W. Y. (1983) · Journal of Polymer Science Polymer Letters Edition · doi:10.1002/pol.1983.130210802 · Cited by 96
Prospectus of Tissue Engineering
Patrick, C., Mikos, A. G., & McIntire, L. V. (1998) · Elsevier eBooks · doi:10.1016/b978-008042689-1/50003-0 · Cited by 94
Cui, Y., Tang, X., Huang, X., & Chen, Y. (2003) · Biomacromolecules · doi:10.1021/bm034237+ · Cited by 25
(2002) · doi:10.1002/1521-3935(20020401)203:5/6<889::aid-macp889>3.0.co;2-o
Research works printed but not linked: 4
- Langer R., 1998, Nature, 392, 5
- Pack J. W., 2002, J. Polym. Sci., Polym. Chem. Ed., 40, 554
- Matsui T., 1993, J. Jpn. Soc. Biomater., 11, 330
- Ye W. P., 1997, Funtional. Polym., 32, 161
Cited by
PEG-PCL-based nanomedicines: A biodegradable drug delivery system and its application
Grossen, P., Witzigmann, D., Sieber, S., & Huwyler, J. (2017) · Journal of Controlled Release · doi:10.1016/j.jconrel.2017.05.028 · Cited by 496
“Long-term experience with medical products consisting of these materials revealed a high biocompatibility and no concerns about toxic side effects [15,16,72].”
Current approaches to electrospun nanofibers for tissue engineering
Rim, N. G., Shin, C. S., & Shin, H. (2013) · Biomedical Materials · doi:10.1088/1748-6041/8/1/014102 · Cited by 277
Naderi, H., Matin, M. M., & Bahrami, A. R. (2011) · Journal of Biomaterials Applications · doi:10.1177/0885328211408946 · Cited by 274
Design and preparation of polymeric scaffolds for tissue engineering
Weigel, T., Schinkel, G., & Lendlein, A. (2006) · Expert Review of Medical Devices · doi:10.1586/17434440.3.6.835 · Cited by 228
Fernández, J., Etxeberria, A., & Sarasua, J.-R. (2012) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2012.01.003 · Cited by 217
Metadata
- Authors
- Jeong, S. I., Kim, B.-S., Lee, Y. M., Ihn, K. J., Kim, S. H., & Kim, Y. H.
- Affiliations
- Kangwon National University (KR)
- Corresponding author
- Kim, Soo Hyun
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2004-05-14
- Volume
- 5
- Issue
- 4
- Pages
- 1303-1309
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W2122538859
- Semantic Scholar
- a04a50c09052d96caaa3814487d28f4f34ae12e5
- Cited by
- 182
- References
- 23
- Citations by year
- 2026: 8 · 2025: 5 · 2024: 5 · 2023: 9 · 2022: 9 · 2021: 14 · 2020: 10 · 2019: 12 · 2018: 8 · 2017: 3 · 2016: 13 · 2015: 4 · 2014: 6 · 2013: 10 · 2012: 10
- FWCI
- 4.00
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- Seoul National University Open Repository (Seoul National University) (submittedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Engineering › Biomedical Engineering › Bone Tissue Engineering Materials
- Health Sciences › Medicine › Surgery › Tissue Engineering and Regenerative Medicine
- Keywords
- poly(L-lactide-co-ε-caprolactone), tissue engineering scaffolds, polymer morphology, microdomains, glass transition temperature, physical crosslinking, in vivo degradation, in vitro degradation, smooth muscle cells, water-induced degradation, hydrophilicity
- MeSH terms
- Animals, Biocompatible Materials, Biodegradation, Environmental, Caproates, Elasticity, Lactones, Materials Testing, Mice, Nude, Polyesters, Surface Properties, Temperature, Time Factors, Molecular Structure, Mice
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.