Morphology of Elastic Poly(l-lactide-co-ε-caprolactone) Copolymers and in Vitro and in Vivo Degradation Behavior of Their Scaffolds
The DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
Abstract
Very elastic PLCL [poly(L-lactide-co-epsilon-caprolactone), 50:50] copolymers were synthesized and extruded into porous tubular scaffolds (pore size 150 +/- 50 microm, porosity 90%) for the application to tissue engineering. The copolymers were basically random and amorphous. However, two T(g)'s (glass transition temperatures) were observed in dynamic mechanical thermal analysis and also in differential scanning calorimetry thermograms. Furthermore, microdomains (about 17 nm in size) were indicated on the small-angle X-ray scattering profile and finally confirmed by transmission electron microscopy. Therefore, the PLCL copolymer was probably composed of a soft matrix of mainly epsilon-caprolactone moieties and hard domains containing more L-lactide units to exhibit a rubberlike elasticity in virtue of the physically cross-linked structure. The smooth muscle cells seeded scaffolds were implanted into nude mice subcutaneously for up to 15 weeks to monitor the in vivo degradation. In addition, they were degraded in vitro in phosphate buffer solution (pH 7.4) for up to 1 year to compare the results each other. All the scaffolds degraded slowly in vivo and in vitro even in the form of a highly porous thin membrane. However, the degradation rate was somewhat faster for in vivo than for in vitro. This should be explained by enzymes that might have played a certain role in the degradation in the body. In addition, the epsilon-caprolactone moieties degraded faster than the L-lactide units did in these PLCL scaffolds, although their hydrophilicities are in the opposite order. This behavior appeared more prominently in the in vivo case. This should result from that the amorphous regions composed of mainly epsilon-caprolactone units might have been first attacked by water because water can penetrate into the amorphous regions easier than the hard domains containing more L-lactides.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Additionally, the scaffolds had 200% higher elongation at break values than their homopolymers, which indicates the advantages of copolymerizing LA and CL to make flexible and soft copolymer scaffolds.”
From Green Copolymers Based on Poly(Lactic Acid)—Short Review (2021) · cites this paper as [76]
In the citing paper
“The DMA profile indicated two Tgs: one at −38 °C and a second at −11 °C.”
From Green Copolymers Based on Poly(Lactic Acid)—Short Review (2021) · cites this paper as [76]
In the citing paper
“No crystalline melting peak was observed, which shows that the PLCL random copolymer is amorphous.”
From Green Copolymers Based on Poly(Lactic Acid)—Short Review (2021) · cites this paper as [76]
In the citing paper
“Regarding thermal properties, tubular scaffolds made of poly(L-lactide-co-ε-caprolactone) (PLCL) (50:50) random copolymers were synthesized, and DSC analysis showed two potential glass transition temperatures (Tg) of the scaffolds in the 0 to −40 °C region.”
From Green Copolymers Based on Poly(Lactic Acid)—Short Review (2021) · cites this paper as [76]
In the citing paper
“PCL and PLA homopolymers had higher Tg: −60 °C and +50 °C, respectively.”
From Green Copolymers Based on Poly(Lactic Acid)—Short Review (2021) · cites this paper as [76]
2 more claims about this paper
Create a free account to see every claim other papers make about this one.
Citations
Cites
Synthetic biodegradable polymers as orthopedic devices
Middleton, J. C., & Tipton, A. J. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00101-0 · Cited by 2,741
(2016) · CRC Press eBooks · doi:10.1201/b12801 · Cited by 2,031
Functional Arteries Grown in Vitro
Niklason, L. E., Gao, J., Abbott, W. M., Hirschi, K. K., Houser, S., Marini, R., & Langer, R. (1999) · Science · doi:10.1126/science.284.5413.489 · Cited by 1,766
Pitt, G. G., Gratzl, M. M., Kimmel, G. L., Surles, J., & Sohindler, A. (1981) · Biomaterials · doi:10.1016/0142-9612(81)90060-0 · Cited by 857
Cyclic mechanical strain regulates the development of engineered smooth muscle tissue
Kim, B.-S., Nikolovski, J., Bonadio, J., & Mooney, D. J. (1999) · Nature Biotechnology · doi:10.1038/13671 · Cited by 491
Self-citationBiodegradable polymers for biomedical uses
Hayashi, T. (1994) · Progress in Polymer Science · doi:10.1016/0079-6700(94)90030-2 · Cited by 341
Frontiers in Tissue Engineering: In Vitro Modulation of Chondrogenesis
Freed, L. E., Martin, I., & Vunjak-Novakovic, G. (1999) · Clinical Orthopaedics and Related Research · doi:10.1097/00003086-199910001-00006 · Cited by 285
Selective Enzymatic Degradations of Poly(l-lactide) and Poly(ε-caprolactone) Blend Films
Liu, L., Li, S., Garreau, H., & Vert, M. (2000) · Biomacromolecules · doi:10.1021/bm000046k · Cited by 272
Frontiers in Tissue Engineering
(1998) · Elsevier eBooks · doi:10.1016/b978-0-08-042689-1.x5001-8 · Cited by 258
Reusch, P., Wagdy, H., Reusch, R., Wilson, E., & Ives, H. E. (1996) · Circulation Research · doi:10.1161/01.res.79.5.1046 · Cited by 233
Research works printed but not linked: 4
- Langer R., 1998, Nature, 392, 5
- Pack J. W., 2002, J. Polym. Sci., Polym. Chem. Ed., 40, 554
- Matsui T., 1993, J. Jpn. Soc. Biomater., 11, 330
- Ye W. P., 1997, Funtional. Polym., 32, 161
Cited by
PEG-PCL-based nanomedicines: A biodegradable drug delivery system and its application
Grossen, P., Witzigmann, D., Sieber, S., & Huwyler, J. (2017) · Journal of Controlled Release · doi:10.1016/j.jconrel.2017.05.028 · Cited by 496
“Long-term experience with medical products consisting of these materials revealed a high biocompatibility and no concerns about toxic side effects [15,16,72].”
Current approaches to electrospun nanofibers for tissue engineering
Rim, N. G., Shin, C. S., & Shin, H. (2013) · Biomedical Materials · doi:10.1088/1748-6041/8/1/014102 · Cited by 277
Naderi, H., Matin, M. M., & Bahrami, A. R. (2011) · Journal of Biomaterials Applications · doi:10.1177/0885328211408946 · Cited by 274
Design and preparation of polymeric scaffolds for tissue engineering
Weigel, T., Schinkel, G., & Lendlein, A. (2006) · Expert Review of Medical Devices · doi:10.1586/17434440.3.6.835 · Cited by 228
Fernández, J., Etxeberria, A., & Sarasua, J.-R. (2012) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2012.01.003 · Cited by 217
Three-Dimensional Biodegradable Structures Fabricated by Two-Photon Polymerization
Claeyssens, F., Hasan, E. A., Gaidukeviciute, A., Achilleos, D. S., Ranella, A., Reinhardt, C., Ovsianikov, A., Shizhou, X., Fotakis, C., Vamvakaki, M., et al. (2009) · Langmuir · doi:10.1021/la803803m · Cited by 187
Jeong, S. I., Jun, I. D., Choi, M. J., Nho, Y. C., Lee, Y. M., & Shin, H. (2008) · Macromolecular Bioscience · doi:10.1002/mabi.200800005 · Cited by 187
Self-citationElastic materials for tissue engineering applications: Natural, synthetic, and hybrid polymers
Coenen, A. M. J., Bernaerts, K. V., Harings, J. A. W., Jockenhoevel, S., & Ghazanfari, S. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.08.027 · Cited by 180
Sarkar, S., Lee, G. Y., Wong, J. Y., & Desai, T. A. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.04.038 · Cited by 169
“The biopolymer poly-caprolactone (PCL) was chosen because of its ease of processing (melting temperature 58–63 1C [6]), biocompatibility [7] and the ability to manipulate its mechanical and degradation properties by the formation of PCL copolymers [8,9].”
BackgroundInoguchi, H., Kwon, I. K., Inoue, E., Takamizawa, K., Maehara, Y., & Matsuda, T. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.08.029 · Cited by 166
Chung, S., Ingle, N. P., Montero, G. A., Kim, S. H., & King, M. W. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.12.007 · Cited by 165
“37 [22] 65–83 [22] – 0.”
BackgroundMethodInfluentialSelf-citationUltra-stretchable and biodegradable elastomers for soft, transient electronics
Han, W. B., Ko, G.-J., Lee, K.-G., Kim, D., Lee, J. H., Yang, S. M., Kim, D.-J., Shin, J.-W., Jang, T.-M., Han, S., et al. (2023) · Nature Communications · doi:10.1038/s41467-023-38040-4 · Cited by 159
Self-citationFunctional Lactide Monomers: Methodology and Polymerization
Gerhardt, W. W., Noga, D. E., Hardcastle, K. I., García, A. J., Collard, D. M., & Weck, M. (2006) · Biomacromolecules · doi:10.1021/bm060024j · Cited by 155
Lee, S. J., Heo, D. N., Park, J. S., Kwon, S. K., Lee, J. H., Lee, J. H., Kim, W. D., Kwon, I. K., & Park, S. A. (2014) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp04801f · Cited by 127
Design concepts and strategies for tissue engineering scaffolds
Chung, S., & King, M. W. (2011) · Biotechnology and Applied Biochemistry · doi:10.1002/bab.60 · Cited by 127
Garkhal, K., Verma, S., Jonnalagadda, S., & Kumar, N. (2007) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.22031 · Cited by 110
Green Copolymers Based on Poly(Lactic Acid)—Short Review
Stefaniak, K., & Masek, A. (2021) · Materials · doi:10.3390/ma14185254 · Cited by 109
Tissue Engineering of Urinary Bladder and Urethra: Advances from Bench to Patients
Orabi, H., Bouhout, S., Morissette, A., Rousseau, A., Chabaud, S., & Bolduc, S. (2013) · The Scientific World JOURNAL · doi:10.1155/2013/154564 · Cited by 118
“The engineered bladder should also contract to expel the urine outside preventing its retention inside.”
BackgroundCatalytic metal-based systems for controlled statistical copolymerisation of lactide with a lactone
Stirling, E., Champouret, Y., & Visseaux, M. (2018) · Polymer Chemistry · doi:10.1039/c8py00310f · Cited by 99
Ranakoti, L., Gangil, B., Bhandari, P., Singh, T., Sharma, S. K., Singh, J., & Singh, S. (2023) · Molecules · doi:10.3390/molecules28020485 · Cited by 120
Florczak, M., & Duda, A. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200803540 · Cited by 94
Van Horn, R. M., Zheng, J. X., Sun, H.-J., Hsiao, M.-S., Zhang, W.-B., Dong, X.-H., Xu, J., Thomas, E. L., Lotz, B., & Cheng, S. Z. D. (2010) · Macromolecules · doi:10.1021/ma1010793 · Cited by 93
Han, W. B., Heo, S., Kim, D., Yang, S. M., Ko, G., Lee, G. J., Kim, D., Rajaram, K., Lee, J. H., Shin, J., et al. (2023) · Science Advances · doi:10.1126/sciadv.adf5883 · Cited by 95
“…harvester has mechanically reversible stability under external stimuli, such as bending and stretching, due to the intrinsic elasticity (PLCL) ( 28 ) as well as materials and structural engineering (i.e., addition of a plasticizer to PEDOT:PSS and serpentine layouts of inorganic Si NMs and Mg)…”
Self-citationRecent Approaches to the Plasticization of Poly(lactic Acid) (PLA) (A Review)
Mastalygina, E. E., & Aleksanyan, K. V. (2023) · Polymers · doi:10.3390/polym16010087 · Cited by 110
“[25–27].”
Xie, J., IHARA, M., Jung, Y., Kwon, I. K., Kim, S. H., Kim, Y. H., & Matsuda, T. (2006) · Tissue Engineering · doi:10.1089/ten.2006.12.449 · Cited by 77
Self-citationJung, Y., Chung, Y.-I., Kim, S. H., Tae, G., Kim, Y. H., Rhie, J. W., Kim, S.-H., & Kim, S. H. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.05.034 · Cited by 77
“In vivo, the mass of PLCL scaffolds decreased gradually to about 20% of the initial mass after 4 months [26].”
BackgroundSelf-citationJeong, S. I., Lee, A., Lee, Y. M., & Shin, H. (2008) · Journal of Biomaterials Science Polymer Edition · doi:10.1163/156856208783721029 · Cited by 82
Self-citationA comprehensive review on polymer single crystals—From fundamental concepts to applications
Agbolaghi, S., Abbaspoor, S., & Abbasi, F. (2017) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2017.11.006 · Cited by 75
Li, C., Wang, L., Yang, Z., Kim, G., Chen, H., & Ge, Z. (2011) · Journal of Biomaterials Science Polymer Edition · doi:10.1163/092050610x551970 · Cited by 71
Chemical modifications of PLA through copolymerization
Puthumana, M., Krishnan, P. S. G., & Nayak, S. K. (2020) · International Journal of Polymer Analysis and Characterization · doi:10.1080/1023666x.2020.1830650 · Cited by 74
Degradation of Poly(ε-caprolactone) Resorbable Multifilament Yarn under Physiological Conditions
Deshpande, M. V., Girase, A., & King, M. W. (2023) · Polymers · doi:10.3390/polym15183819 · Cited by 76
“observed that the PCL component of the copolymer degraded faster than the PLLA component due to a higher proportion of amorphous regions available for hydrolytic reaction, despite PCL’s greater hydrophobicity [10].”
BackgroundDånmark, S., Finne‐Wistrand, A., Schander, K., Hakkarainen, M., Arvidson, K., Mustafa, K., & Albertsson, A. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.02.011 · Cited by 67
Kim, M.-H., Hong, B.-H., Lee, J., Kim, S. E., Kang, S. S., Kim, Y. H., & Tae, G. (2012) · Biomacromolecules · doi:10.1021/bm3005353 · Cited by 68
Self-citationMitigation of hypertrophic scar contraction via an elastomeric biodegradable scaffold
Lorden, E. R., Miller, K. J., Bashirov, L., Ibrahim, M. M., Hammett, E., Jung, Y., Medina, M. A., Rastegarpour, A., Selim, M. A., Leong, K. W., et al. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2014.12.003 · Cited by 70
Yuan, W., Yuan, J., Zhou, L., Wu, S., & Hong, X. (2010) · Polymer · doi:10.1016/j.polymer.2010.04.016 · Cited by 66
Niu, Z., Wang, X., Xin, M., Guo, X. W., Jiang, Y., Xu, Y., Li, Q., & Shen, C. (2019) · Biomedical Materials · doi:10.1088/1748-605x/ab07f1 · Cited by 65
Amsden, B. G., Tse, M. Y., Turner, N. D., Knight, D. K., & Pang, S. C. (2006) · Biomacromolecules · doi:10.1021/bm050731x · Cited by 64
Hydrolytic Degradation Behavior of a Renewable Thermoplastic Elastomer
Wanamaker, C. L., Tolman, W. B., & Hillmyer, M. A. (2009) · Biomacromolecules · doi:10.1021/bm801292v · Cited by 63
Lee, J., Guarino, V., Gloria, A., Ambrosio, L., Tae, G., Kim, Y. H., Jung, Y., Kim, S.-H., & Kim, S. H. (2010) · Journal of Biomaterials Science, Polymer Edition · doi:10.1163/092050609x12471222313524 · Cited by 62
Self-citationYang, J., Zhao, T., Zhou, Y., Liu, L., Li, G., Zhou, E., & Chen, X. (2007) · Macromolecules · doi:10.1021/ma062727z · Cited by 61
Yuan, W., Yuan, J., Zhou, M., & Pan, C. (2008) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.22612 · Cited by 62
L,L‐Lactide and ε‐Caprolactone Block Copolymers by a ‘Poly(L,L‐lactide) Block First’ Route
Florczak, M., Libiszowski, J., Mosnacek, J., Duda, A., & Penczek, S. (2007) · Macromolecular Rapid Communications · doi:10.1002/marc.200700160 · Cited by 57
Synthesis of Poly(l-lactide-co-ε-caprolactone) Copolymer: Structure, Toughness, and Elasticity
Zhang, M., Chang, Z., Wang, X., & Li, Q. (2021) · Polymers · doi:10.3390/polym13081270 · Cited by 59
“The CL section has very low reactivity below 140 ◦C, such that it is not easy to open the ring [28].”
BackgroundInfluentialA mechanistic Study on the Chemical and Enzymatic Degradation of PEG‐Oligo(ε‐caprolactone) Micelles
Carstens, M. G., van Nostrum, C. F., Verrijk, R., de Leede, L. G. J., Crommelin, D. J. A., & Hennink, W. E. (2007) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.21092 · Cited by 61
Saha, S. K., & Tsuji, H. (2006) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2006.03.020 · Cited by 67
Kan, C., & Ma, H. (2016) · RSC Advances · doi:10.1039/c6ra07374c · Cited by 56
Fabrication of a new tubular fibrous PLCL scaffold for vascular tissue engineering
Kim, S.-H., Kwon, J. H., Chung, M. S., Chung, E., Jung, Y., Kim, S. H., & Kim, Y. H. (2006) · Journal of Biomaterials Science, Polymer Edition · doi:10.1163/156856206778937244 · Cited by 55
Self-citationMicrostructure and properties of nano-fibrous PCL-b-PLLA scaffolds for cartilage tissue engineering
Li, H., Liu, B., Xipeng, G., Xie, G., Liao, S., Quan, D., Cai, D., Lu, J., & Ramakrishna, S. (2009) · European Cells and Materials · doi:10.22203/ecm.v018a06 · Cited by 58
“PCFM Lab, OFCM Institute, Sun Yat-Sen University, Guangzhou, 510275, China. modulated by changing the composition of the copolymer (Jeong et al., 2004; Zhao et al., 2007; Kister et al., 2000; Li et al., 1996).”
BackgroundRegenerative and engineered options for urethroplasty
Pederzoli, F., Joice, G. A., Salonia, A., Bivalacqua, T. J., & Sopko, N. A. (2019) · Nature Reviews Urology · doi:10.1038/s41585-019-0198-y · Cited by 56
Jung, Y., Kim, S. H., You, H. J., Kim, S.-H., Ha Kim, Y., & Min, B. G. (2008) · Journal of Biomaterials Science, Polymer Edition · doi:10.1163/156856208784909336 · Cited by 51
Self-citationLaurent, C. P., Vaquette, C., Liu, X., Schmitt, J.-F., & Rahouadj, R. (2018) · Journal of Biomaterials Applications · doi:10.1177/0885328218757064 · Cited by 49
From Molecules to Machines: A Multiscale Roadmap to Intelligent, Multifunctional Soft Robotics
Li, Y., Schreiber, S., Yang, H., Liu, M., Little, J. M., Cao, W., Luo, Y., Bao, Y., Shih, C., Bai, H., et al. (2025) · Chemical Reviews · doi:10.1021/acs.chemrev.4c00972 · Cited by 55
Fernández, J., Larrañaga, A., Etxeberria, A., Wang, W., & Sarasua, J. R. (2014) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35036 · Cited by 45
3D printing of implantable elastic PLCL copolymer scaffolds
Liu, W., Feng, Z., Ou-Yang, W., Pan, X., Wang, X., Huang, P., Zhang, C., Kong, D., & Wang, W. (2020) · Soft Matter · doi:10.1039/c9sm02396h · Cited by 43
Park, D., Kim, D., Park, S. J., Choi, J. H., Seo, Y., Kim, D., Lee, S., Hyun, J. K., Yoo, J. H., Jung, Y., et al. (2022) · npj Regenerative Medicine · doi:10.1038/s41536-022-00257-0 · Cited by 46
Self-citationShafiq, M., Jung, Y., & Kim, S. H. (2015) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35400 · Cited by 46
Self-citationTissue‐engineered blood vessels with endothelial nitric oxide synthase activity
Lim, S. H., Cho, S., Park, J., et al. (2007) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.30977 · Cited by 41
Self-citationShafiq, M., Jung, Y., & Kim, S. H. (2016) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35666 · Cited by 44
Self-citationLipase-Catalyzed Ring-Opening Copolymerization of ε-Caprolactone and β-Lactam
Stavila, E., van Ekenstein, G. O. R. A., Woortman, A. J. J., et al. (2013) · Biomacromolecules · doi:10.1021/bm401514k · Cited by 40
Zhao, X., Irvine, S. A., Agrawal, A., et al. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.08.024 · Cited by 39
Polymeric Scaffold Aided Stem Cell Therapeutics for Cardiac Muscle Repair and Regeneration
Lakshmanan, R., Krishnan, U. M., & Sethuraman, S. (2013) · Macromolecular Bioscience · doi:10.1002/mabi.201300223 · Cited by 39
Pokrywczynska, M., Jundzill, A., Adamowicz, J., Kowalczyk, T., Warda, K., Rasmus, M., Buchholz, L., Krzyzanowska, S., Nakielski, P., Chmielewski, T., et al. (2014) · PLoS ONE · doi:10.1371/journal.pone.0105295 · Cited by 39
Tsuji, H. (2010) · Wiley eBooks · doi:10.1002/9780470649848.ch21 · Cited by 67
Lee, S., Lee, J. H., & Cho, Y. (2014) · Tissue Engineering and Regenerative Medicine · doi:10.1007/s13770-014-0067-y · Cited by 39
García-Valle, F. M., Cuenca, T., Mosquera, M. E. G., Milione, S., & Cano, J. (2020) · European Polymer Journal · doi:10.1016/j.eurpolymj.2020.109527 · Cited by 41
Li, T., Tian, L., Liao, S., Ding, X. B., Irvine, S. A., & Ramakrishna, S. (2019) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2019.06.003 · Cited by 38
Zada, M. H., Kumar, A., Elmalak, O., Mechrez, G., & Domb, A. J. (2019) · ACS Omega · doi:10.1021/acsomega.9b02889 · Cited by 45
Highly Elastic Scaffolds Produced by Melt Electrowriting of Poly(L‐lactide‐co‐ε‐caprolactone)
Díaz, R. S., Park, J., Rodrigues, L. L., Dalton, P. D., De‐Juan‐Pardo, E. M., & Dargaville, T. R. (2021) · Advanced Materials Technologies · doi:10.1002/admt.202100508 · Cited by 38
Li, C., Zhang, J., Li, Y., Moran, S. K., Khang, G., & Ge, Z. (2013) · Biomedical Materials · doi:10.1088/1748-6041/8/2/025005 · Cited by 36
Yuan, W., Gao, X., Pei, E., & Li, Z. (2018) · Polymer Chemistry · doi:10.1039/c8py00721g · Cited by 37
Rim, N. G., Lee, J. H., Jeong, S. I., Lee, B., Kim, C. H., & Shin, H. (2009) · Macromolecular Bioscience · doi:10.1002/mabi.200800358 · Cited by 36
Self-citationAniagyei, S. E., Sims, L. B., Malik, D. A., Tyo, K. M., Curry, K. C., Kim, W., Hodge, D. A., Duan, J., & Steinbach-Rankins, J. M. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.11.029 · Cited by 36
Kim, D., Chung, J. J., Jung, Y., & Kim, S. H. (2019) · Scientific Reports · doi:10.1038/s41598-019-53514-6 · Cited by 37
Self-citationCho, S., Jeon, O., Lim, J. E., et al. (2006) · Journal of Vascular Surgery · doi:10.1016/j.jvs.2006.07.032 · Cited by 35
Self-citationSriyai, M., Tasati, J., Molloy, R., Meepowpan, P., Somsunan, R., Worajittiphon, P., Daranarong, D., Meerak, J., & Punyodom, W. (2021) · ACS Omega · doi:10.1021/acsomega.1c03569 · Cited by 40
Surface modified poly( L ‐lactide‐co‐ε‐caprolactone) microspheres as scaffold for tissue engineering
Garkhal, K., Verma, S., Tikoo, K., & Kumar, N. (2007) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31150 · Cited by 35
Haim Zada, M., Kumar, A., Elmalak, O., Markovitz, E., Icekson, R., & Domb, A. J. (2020) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2019.118870 · Cited by 33
Ahola, N., Männistö, N., Veiranto, M., Karp, M. T., Rich, J., Efimov, A., Seppälä, J. V., & Kellomäki, M. (2012) · Biomatter · doi:10.4161/biom.23162 · Cited by 33
Kasyapi, N., & Bhowmick, A. K. (2014) · RSC Advances · doi:10.1039/c4ra02745k · Cited by 34
Amirian, M., Nabipour Chakoli, A., Sui, J., & Cai, W. (2012) · Journal of Polymer Research · doi:10.1007/s10965-011-9777-1 · Cited by 32
Shen, J. Y., Pan, X. Y., Lim, C. H. J., Chan‐Park, M. B. E., Zhu, X., & Beuerman, R. W. (2007) · Biomacromolecules · doi:10.1021/bm060766c · Cited by 41
Yuan, W., Zhao, Z., Gu, S., & Ren, J. (2010) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.24136 · Cited by 34
Yin, S., Xia, Y., Jia, Q. F., Hou, Z., & Zhang, N. (2016) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2016.1252303 · Cited by 33
“[8,9,22] Although their copolymers (poly-(ε-caprolactone-co-llactic acid), PCLA) can lose the ability to crystallize at an appropriate LA/CL ratio,[23] degradability is only slightly enhanced because of their hydrophobic backbone.[24] It is known that polyurethane degradation rate can be accelerated by introducing hyd…”
BackgroundSartoneva, R., Kuismanen, K., Juntunen, M., Karjalainen, S., Hannula, M., Kyllönen, L., Hyttinen, J., Huhtala, H., Paakinaho, K., & Miettinen, S. (2018) · Royal Society Open Science · doi:10.1098/rsos.180811 · Cited by 31
Genitourinary Tissue Engineering: Reconstruction and Research Models
Caneparo, C., Brownell, D., Chabaud, S., & Bolduc, S. (2021) · Bioengineering · doi:10.3390/bioengineering8070099 · Cited by 32
Kim, D., Park, D., Kim, T. H., Chung, J. J., Jung, Y., & Kim, S. H. (2021) · Advanced Healthcare Materials · doi:10.1002/adhm.202100107 · Cited by 31
Self-citationChapanian, R., Tse, M. Y., Pang, S. C.-N., & Amsden, B. G. (2009) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32422 · Cited by 31
On-demand heart valve manufacturing using focused rotary jet spinning
Motta, S. E., Peters, M. M., Chantre, C. O., Chang, H., Cera, L., Liu, Q., Cordoves, E. M., Fioretta, E. S., Zaytseva, P., Cesarovic, N., et al. (2023) · Matter · doi:10.1016/j.matt.2023.05.025 · Cited by 32
Yu, F., Fu, R., Liu, L., Wang, X., Wu, T., Shen, W., Gui, Z., Mo, X., Fang, B., & Xia, L. (2019) · Frontiers in Pharmacology · doi:10.3389/fphar.2019.01275 · Cited by 32
Makuloluwa, A. K., Hamill, K. J., Rauz, S., Bosworth, L. A., Haneef, A. S., Romano, V., Williams, R., Dartt, D. A., & Kaye, S. B. (2021) · The Ocular Surface · doi:10.1016/j.jtos.2021.05.011 · Cited by 32
Poh, P. S. P., Hege, C. S., Chhaya, M. P., Balmayor, E. R., Foehr, P., Burgkart, R., Schantz, J., Schiller, S., Schilling, A. F., & Hutmacher, D. W. (2016) · Polymer International · doi:10.1002/pi.5181 · Cited by 31
Hassan, K., Kim, S. H., Park, I., Lee, S. H., Kim, S. H., Jung, Y., Kim, S., & Kim, S. H. (2011) · Macromolecular Research · doi:10.1007/s13233-011-0208-2 · Cited by 27
Self-citationJang, B. S., Cheon, J. Y., Kim, S. H., & Park, W. H. (2017) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2017.1367635 · Cited by 29
Self-citationMicropatterned Elastomeric Composites for Encapsulation of Transient Electronics
Han, W. B., Ko, G., Yang, S. M., Kang, H., Lee, J. H., Shin, J., Jang, T., Han, S., Kim, D., Lim, J. H., et al. (2023) · ACS Nano · doi:10.1021/acsnano.3c03063 · Cited by 24
Ugartemendia, J. M., Muñoz, M. E., Sarasua, J.-R., & Santamaría, A. (2014) · Rheologica Acta · doi:10.1007/s00397-014-0797-8 · Cited by 25
“…scaffolds and/ or implants (medical devices) require tunable mechanical properties and biodegradability; hence, an attempt to synthesize different PLA-based copolymers has been tried (Garkhal et al. 2007; Huang 2005; Jeong et al. 2004a, b, c; Song and Feng 1984; Södergård and Stolt 2002).”
BackgroundMechanical properties of compliant double layered poly(L-lactide-co-ɛ-caprolactone) vascular graft
Kim, S. H., Mun, C. H., Jung, Y., Kim, D., Kim, D., & Kim, S. H. (2013) · Macromolecular Research · doi:10.1007/s13233-013-1095-5 · Cited by 25
Self-citationFelfel, R. M., Gupta, D., Zabidi, A. Z., Prosser, A., Scotchford, C. A., Sottile, V., & Grant, D. M. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.09.035 · Cited by 24
“Therefore, the ideal scaffold should also maintain mechanical stability during the period of tissue healing while undergoing degradation and replacement by the remodelled tissue in vivo [15].”
BackgroundEnzyme Immobilization on Nanomaterials for Biosensor and Biocatalyst in Food and Biomedical Industry
Bhavaniramya, S., Vanajothi, R., Vishnupriya, S., Premkumar, K., Al-Aboody, M. S., Vijayakumar, R., & Baskaran, D. (2019) · Current Pharmaceutical Design · doi:10.2174/1381612825666190712181403 · Cited by 28
Ungpittagul, T., Wongmahasirikun, P., & Phomphrai, K. (2020) · Dalton Transactions · doi:10.1039/d0dt01115k · Cited by 22
Park, Y.-J., Ryu, Y., Choi, M.-K., Kim, K., & Kang, S. (2024) · Soft Science · doi:10.20517/ss.2024.06 · Cited by 29
Metadata
- Authors
- Jeong, S. I., Kim, B.-S., Lee, Y. M., Ihn, K. J., Kim, S. H., & Kim, Y. H.
- Affiliations
- Kangwon National University (KR)
- Corresponding author
- Kim, Soo Hyun
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2004-05-14
- Volume
- 5
- Issue
- 4
- Pages
- 1303-1309
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W2122538859
- Semantic Scholar
- a04a50c09052d96caaa3814487d28f4f34ae12e5
- Cited by
- 182
- References
- 23
- Citations by year
- 2026: 8 · 2025: 5 · 2024: 5 · 2023: 9 · 2022: 9 · 2021: 14 · 2020: 10 · 2019: 12 · 2018: 8 · 2017: 3 · 2016: 13 · 2015: 4 · 2014: 6 · 2013: 10 · 2012: 10
- FWCI
- 4.00
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- Seoul National University Open Repository (Seoul National University) (submittedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Engineering › Biomedical Engineering › Bone Tissue Engineering Materials
- Health Sciences › Medicine › Surgery › Tissue Engineering and Regenerative Medicine
- Keywords
- poly(L-lactide-co-ε-caprolactone), tissue engineering scaffolds, polymer morphology, microdomains, glass transition temperature, physical crosslinking, in vivo degradation, in vitro degradation, smooth muscle cells, water-induced degradation, hydrophilicity
- MeSH terms
- Animals, Biocompatible Materials, Biodegradation, Environmental, Caproates, Elasticity, Lactones, Materials Testing, Mice, Nude, Polyesters, Surface Properties, Temperature, Time Factors, Molecular Structure, Mice
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.