Characterization of the Porous Structure of SBA-15
The DOI matches its Crossref record; 70 of the 70 references it cites were found in a registry or an index.
Abstract
SBA-15 ordered mesoporous silicas were synthesized using the method reported by Zhao et al. The structures of these materials were characterized using powder X-ray diffraction (XRD), thermogravimetric analysis (TGA), and nitrogen adsorption. The samples were found to exhibit structural properties similar to those reported earlier. Our study confirmed that the size of primary mesopores of SBA-15 can be tailored by the choice of synthesis temperature and that SBA-15 exhibits a significant amount of disordered micropores and small mesopores. The volume and size of these complementary pores were found to be dependent to some extent on the synthesis/aging temperature. It was shown that the washing of as-synthesized SBA-15 in water or ethanol was accompanied by an appreciable structural shrinkage and led to the removal of a significant part of the polymeric template. Therefore, washing needs to be avoided if one wants to isolate SBA-15 without appreciable loss of the template. It was confirmed that water-washed SBA-15 samples have fully accessible primary mesopores. Ethanol-washed samples also were found to exhibit accessible porosity. Despite an appreciable content of the template in the water- and ethanol-washed samples, their pore sizes were usually larger than those of the calcined materials. The observed structural properties of SBA-15 and their dependence on the synthesis temperature and washing were attributed to the changes in the degree of penetration of the poly(ethylene oxide) chains of the triblock copolymer template within the siliceous walls of SBA-15.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“For example, with the aid of trimethylbenzene (TMB), the pore size of silica can be expanded to 30 nm [158].”
From Block Copolymers: Synthesis, Self-Assembly, and Applications (2017) · cites this paper as [158]
Citations
Cites
Sing, K. S. W. (1985) · Pure and Applied Chemistry · doi:10.1351/pac198557040603 · Cited by 24,485
Triblock Copolymer Syntheses of Mesoporous Silica with Periodic 50 to 300 Angstrom Pores
Zhao, D., Feng, J., Huo, Q., Melosh, N., Fredrickson, G. H., Chmelka, B. F., & Stucky, G. D. (1998) · Science · doi:10.1126/science.279.5350.548 · Cited by 11,753
Zhao, D., Huo, Q., Feng, J., Chmelka, B. F., & Stucky, G. D. (1998) · Journal of the American Chemical Society · doi:10.1021/ja974025i · Cited by 6,697
Younan Xia, A., & Whitesides, G. M. (1998) · Angewandte Chemie International Edition · doi:10.1002/(sici)1521-3773(19980316)37:5<667::aid-anie667>3.0.co;2-h · Cited by 4,672
Generalized syntheses of large-pore mesoporous metal oxides with semicrystalline frameworks
Yang, P., Zhao, D., Margolese, D. I., Chmelka, B. F., & Stucky, G. D. (1998) · Nature · doi:10.1038/24132 · Cited by 2,493
Evaporation-Induced Self-Assembly: Nanostructures Made Easy
Brinker, C. J., Lu, Y., Sellinger, A., & Fan, H. (1999) · Advanced Materials · doi:10.1002/(sici)1521-4095(199905)11:7<555::aid-adma555>3.0.co;2-e · Cited by 2,112
Evaporation-Induced Self-Assembly: Nanostructures Made Easy
Brinker, C. J., Lu, Y., Sellinger, A., & Fan, H. (1999) · Advanced Materials · doi:10.1002/(sici)1521-4095(199905)11:7<579::aid-adma579>3.0.co;2-r · Cited by 2,079
Alexandridis, P., & Alan Hatton, T. (1995) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/0927-7757(94)03028-x · Cited by 1,920
Surfactant Control of Phases in the Synthesis of Mesoporous Silica-Based Materials
Huo, Q., Margolese, D. I., & Stucky, G. D. (1996) · Chemistry of Materials · doi:10.1021/cm960137h · Cited by 1,567
Wanka, G., Hoffmann, H., & Ulbricht, W. (1994) · Macromolecules · doi:10.1021/ma00093a016 · Cited by 1,496
Research works printed but not linked: 3
- Bagshaw S. A., 1995, J. Science, 269, 1242
- Bae S. J., 1999, Chem. Commun., 31
- Ryoo R., J. Phys. Chem. B, submitted for publication.
Cited by
Items 901–1,000 of 1,000
Kim, P., Kim, Y., Kang, T., Song, I. K., & Yi, J. (2007) · Catalysis Surveys from Asia · doi:10.1007/s10563-007-9017-1 · Cited by 13
Waldron, K., Wu, Z., Zhao, D., Chen, X. D., & Selomulya, C. (2015) · Chemical Engineering Science · doi:10.1016/j.ces.2015.01.024 · Cited by 13
Catalytic chemiluminescence properties of boehmite “nanococoons”
Cao, H., Zhang, L., Liu, X., Zhang, S., Liang, Y., & Zhang, X. (2007) · Applied Physics Letters · doi:10.1063/1.2737133 · Cited by 13
Preparation of High‐Density Fuel Through Dimerization of β‐Pinene
Xu, J., Zhu, P., Liu, X., Hou, Y. F., Yang, X., Shan, S., Ma, Y., Pan, D., Dong, B., & Guo, Z. (2020) · Chemical Engineering & Technology · doi:10.1002/ceat.202000250 · Cited by 13
Oyola-Rivera, O., He, J., Huber, G. W., Dumesic, J. A., & Cardona-Martínez, N. (2021) · SSRN Electronic Journal · doi:10.2139/ssrn.3863037 · Cited by 13
Meng, X., Qi, Z., Yu, C., Bian, J., Ma, Z., Long, Q., & Su, J. (2021) · ACS Omega · doi:10.1021/acsomega.0c06264 · Cited by 12
Kirchhof, M., Gugeler, K., Beurer, A., Fischer, F. R., Batman, D., Bauch, S. M., Kolin, S., Nicholas, E., Schoch, R., Vogler, C., et al. (2023) · Catalysis Science & Technology · doi:10.1039/d3cy00381g · Cited by 12
Dai, P., Zhang, L., Li, G., Sun, Z., Liu, X., & Wu, M. (2013) · Materials Research Bulletin · doi:10.1016/j.materresbull.2013.10.026 · Cited by 12
Non-thermal plasma assisted catalytic thiophene removal from fuel under different atmospheres
Meng, S., Li, W., Li, Z., & Song, H. (2022) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2022.133282 · Cited by 12
Chen, J.-Y., Pineault, H., & Brunelli, N. A. (2022) · Journal of Catalysis · doi:10.1016/j.jcat.2022.08.015 · Cited by 12
Selective removal of sulfur compounds in city-gas by adsorbents
Ko, C. H., Song, H.-I., Park, J., Han, S., & Kim, J. (2007) · Korean Journal of Chemical Engineering · doi:10.1007/s11814-007-0132-5 · Cited by 12
Self-citationTunable hierarchical porous silica materials using hydrothermal sedimentation-aggregation technique
Zaki, A., Xu, J., Stoclet, G., Casale, S., Dacquin, J., & Granger, P. (2015) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2015.01.041 · Cited by 12
Synthesis of Propylene Glycol Methyl Ether Catalyzed by MCM-41
Liang, S., Zhou, Y., Liu, H., Jiang, T., & Han, B. (2011) · Synthetic Communications · doi:10.1080/00397911003707089 · Cited by 12
“Solvent is extracted by a mild and efficient method to remove surfactants and get porosities without distinct effect on the frameworks.([21]) Most of the surfactant could be removed, and a small amount of surfactant molecules, which were more strongly bonded to the inorganic hosts, remained in the pores.”
MethodUdayakumar, S., Shim, H., Vedarajan, R., & Park, D. (2009) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2009.09.010 · Cited by 12
Rahmat, N., Sadon, N., & Yusof, M. A. (2017) · American Journal of Applied Sciences · doi:10.3844/ajassp.2017.938.944 · Cited by 12
“It is stated that, under nitrogen atmosphere, ionic surfactant template in pure silica usually decompose completely at much lower temperature, below 300°C (Ko and Ryong, 2000).”
BackgroundMethodRibeiro, L. M. O., Falleiros, L. N. S. S., de Resende, M. M., Ribeiro, E. J., Almeida, R. M. R. G., & da Silva, A. O. S. (2018) · Journal of Porous Materials · doi:10.1007/s10934-018-0615-2 · Cited by 12
Diekmann, M., Koch, G., König, M., & Ressler, T. (2018) · ChemCatChem · doi:10.1002/cctc.201801369 · Cited by 12
Ribeiro, S. O., Granadeiro, C. M., Almeida, P. L., Pires, J., Valença, R., Campos‐Martín, J. M., Ribeiro, J. C., de Castro, B., & Balula, S. S. (2019) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.9b02340 · Cited by 12
Phase Separation in La1-xSrxMnO3+δNanocrystals Studied by Electron Spin Resonance
Tajiri, T., Deguchi, H., Kohiki, S., Mito, M., Takagi, S., Mitome, M., Murakami, Y., & Kohno, A. (2008) · Journal of the Physical Society of Japan · doi:10.1143/jpsj.77.074715 · Cited by 12
Morphological models of complex ordered materials based on inhomogeneously clipped Gaussian fields
Gommes, C., & Pirard, J. (2009) · Physical Review E · doi:10.1103/physreve.80.061401 · Cited by 12
Lee, S.-A., Hong, S., Kim, D.-O., Han, T., Iijima, S., & Nam, J. (2007) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2007.08.017 · Cited by 12
Structural and catalytic properties of V-SBA-15 for the vapor phase oxidation of diphenylmethane
Santhanaraj, D., Suresh, C. H., Gurulakshmi, M., Sasirekha, N., & Shanthi, K. (2011) · Reaction Kinetics Mechanisms and Catalysis · doi:10.1007/s11144-011-0373-5 · Cited by 12
General Synthesis and Physico-chemical Properties of Mesoporous Materials
Ha, C., & Park, S. S. (2018) · Springer series in materials science · doi:10.1007/978-981-13-2959-3_2 · Cited by 12
Silicas of Unimodal and Bimodal Porosities Probed by 129Xe NMR Spectroscopy
Davidson, A. M., Berthault, P., & Desvaux, H. (2003) · The Journal of Physical Chemistry B · doi:10.1021/jp035190p · Cited by 12
Zeotile-2: A microporous analogue of MCM-48
Kremer, S. P. B., Kirschhock, C. E. A., Aerts, A., Aerts, C. A., Houthoofd, K. J., Grobet, P. J., Jacobs, P. A., Lebedev, O. I., Tendeloo, G. V., & Martens, J. A. (2005) · Solid State Sciences · doi:10.1016/j.solidstatesciences.2005.01.021 · Cited by 12
Cao, L., Dong, H., Huang, L., Matyjaszewski, K. A., & Kruk, M. (2009) · Adsorption · doi:10.1007/s10450-009-9165-x · Cited by 14
Self-citationMohammadi, S., Gholivand, M. B., & Amiri, M. (2024) · Materials Today Communications · doi:10.1016/j.mtcomm.2024.109165 · Cited by 11
Understanding protein adsorption on silica mesoporous materials through thermodynamic simulations
Tárraga, W. A., Picco, A. S., & Longo, G. S. (2024) · Surfaces and Interfaces · doi:10.1016/j.surfin.2024.104870 · Cited by 11
Davies, M., Rühle, B., Li, C., Müllen, K., Bein, T., & Bräuchle, C. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp503780n · Cited by 11
Parlett, C. M. A., Durndell, L. J., Isaacs, M. A., Liu, X., & Wu, C. (2020) · Topics in Catalysis · doi:10.1007/s11244-020-01265-4 · Cited by 11
Synthesis of PLA/SBA-15 Composite Scaffolds for Bone Tissue Engineering
Chanes‐Cuevas, O. A., Arellano, U., Alvarez‐Gayosso, C., Suaste-Olmos, F., Villarreal-Ramírez, E., Álvarez-Fregoso, O., García-Hipólito, M., González‐Alva, P., & Álvarez-Pérez, M. A. (2020) · Materials Research · doi:10.1590/1980-5373-mr-2020-0211 · Cited by 11
Dual-template approach to hierarchically porous polymer membranes
Southern, T. J. F., & Evans, R. C. (2020) · Materials Chemistry Frontiers · doi:10.1039/d0qm00610f · Cited by 11
de Souza, M. R. O., Silva, J. M. R., Araujo, M. D. S., de Almeida, J. S., Fernandes, V. J., Coriolano, A. C. F., Delgado, R. C. O. B., & de Araujo, A. S. (2021) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-021-10765-8 · Cited by 11
Min, Q., Miao, P., Liu, J., Ma, J., Qi, M., & Shamsa, F. (2021) · Catalysis Letters · doi:10.1007/s10562-021-03728-z · Cited by 11
Lv, F., Miao, Y., Yang, D., Mao, B., Bian, Z., & Zhu, F. (2022) · Catalysts · doi:10.3390/catal12111334 · Cited by 11
“These materials display similar nitrogen sorption isotherms with narrow pore-size distributions centered at about 3.12–6.62 SBA-15 5%-TiO 2 -SBA-15 700 SBA-15 nm (Figure 4), which is typical for surfactant-templated mesoporous materials [25].”
BackgroundInfluentialRad, S. L., Eftekhari‐Sis, B., Vahdati‐Khajeh, S., Zirak, M., & Safin, D. A. (2023) · Applied Organometallic Chemistry · doi:10.1002/aoc.7059 · Cited by 11
López, T., Krötzsch, F. E., Ortiz-Islas, E., Lemus, M. A. A., Balsadella, E., Martínez-Blanes, J. M., & Odriozola, J. A. (2008) · Key engineering materials · doi:10.4028/www.scientific.net/kem.391.169 · Cited by 11
Effects of anisotropic strain on perovskite LaMnO3+δ nanoparticles embedded in mesoporous silica
Tajiri, T., Saisho, S., Komorida, Y., Mito, M., Deguchi, H., & Kohno, A. (2011) · Journal of Applied Physics · doi:10.1063/1.3624741 · Cited by 11
Balantseva, E. V., Miletto, I., Coluccia, S., & Berlier, G. (2014) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2014.03.018 · Cited by 11
Vélez, A. R., & Sierra, L. (2006) · Chemical Engineering Science · doi:10.1016/j.ces.2006.02.002 · Cited by 11
Lewandowski, D., Schroeder, G., Sawczak, M., & Ossowski, T. (2015) · Journal of Physics and Chemistry of Solids · doi:10.1016/j.jpcs.2015.04.007 · Cited by 11
Pan, D., Zhao, L., Qian, K., Tan, L., Zhou, L., Zhang, J., Huang, X., Fan, Y., Liu, H., Yu, C., et al. (2011) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2010.98 · Cited by 11
Ramiro‐Gutiérrez, M. L., Santos‐Ruiz, L., Borrego-González, S., Becerra, J., & Díaz‐Cuenca, A. (2016) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2016.04.018 · Cited by 11
Duraczyńska, D., Michalik-Zym, A., Napruszewska, B. D., Dula, R., Socha, R. P., Lityńska‐Dobrzyńska, L., Gaweł, A., Bahranowski, K., & Serwicka, E. M. (2016) · ChemistrySelect · doi:10.1002/slct.201600491 · Cited by 11
dos Santos, S. M. L., Cecilia, J. A., Vilarrasa‐García, E., García‐Sancho, C., da Silva, I. J., Rodrı́guez-Castellón, E., & Azevedo, D. C. S. (2017) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2017.10.044 · Cited by 11
Organic–inorganic polymer hybrids and porous materials obtained on their basis
Cazacu, M., Drăgan, E. S., & Vlad, A. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.11957 · Cited by 11
Vrålstad, T., Magnusson, H., & Sjöblom, J. (2007) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2007.02.048 · Cited by 11
Jin, Z., Wang, X., & Cui, X. (2007) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2007.03.042 · Cited by 11
Wakihara, T., Fan, W., Kohara, S., Ogura, M., Sankar, G., & Okubo, T. (2007) · Chemistry Letters · doi:10.1246/cl.2008.30 · Cited by 11
Inclusion of prednicarbate in the SBA-15 silica
Neto, H. S., de Araújo, G. L. B., Santos, L. L., Cosentino, I. C., Carvalho, F. M. D. S., & Matos, J. D. R. (2015) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-015-4945-x · Cited by 11
“This lower release rate can be attributed to the presence of micropores in the SBA-15 [6, 51], displayed in Fig.”
BackgroundGeszke-Moritz, M., & Moritz, M. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.07.055 · Cited by 11
Recovery of nitrate from water streams using amine-grafted and magnetized SBA-15
Ryu, S. C., Kim, J. Y., Hwang, M. J., & Moon, H. (2018) · Korean Journal of Chemical Engineering · doi:10.1007/s11814-017-0321-9 · Cited by 11
Catalytic behavior of niobium-containing SBA-15 molecular sieves in the oxidation of cyclohexene
Nowak, I. (2004) · Studies in surface science and catalysis · doi:10.1016/s0167-2991(04)80575-5 · Cited by 11
Liquid-phase adsorption experiments on ordered mesoporous silicas
Rockmann, R., Kalies, G., & Klepel, O. (2007) · Adsorption · doi:10.1007/s10450-007-9063-z · Cited by 11
Gascón, V., Márquez‐Álvarez, C., Dı́az, I., & Blanco, R. M. (2016) · Wiley eBooks · doi:10.1002/9781119113874.ch19 · Cited by 11
Mousavi, S., Mansoori, Y., Nuri, A., Esquivel, D., & Navarro, M. Á. (2022) · Catalysis Letters · doi:10.1007/s10562-021-03905-0 · Cited by 10
Role of Silica on Clay-Catalyzed Ozonation for Total Mineralization of Bisphenol-A
Boudissa, F., Aruş, V. A., Foka-Wembe, E.-N., Zekkari, M., Ouargli, R., Dewez, D., Roy, R., & Azzouz, A. (2023) · Molecules · doi:10.3390/molecules28093825 · Cited by 10
Should we still be using HCl in the synthesis of SBA-15 and Al-SBA-15?
Iga, G. D., Vieira, J. L., Santos, É. A., Albuquerque, J. S., Urquieta-Gonzalez, E. A., Bueno, J. M. C., & Gallo, J. M. R. (2024) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2024.113222 · Cited by 11
Autthanit, C., & Jongsomjit, B. (2017) · Journal of Porous Materials · doi:10.1007/s10934-017-0380-7 · Cited by 10
Nguyen, G. T., Hwang, H. S., & Park, I. (2022) · International Journal of Energy Research · doi:10.1002/er.8037 · Cited by 10
“06 cm(3)/g.(29) The other samples showed lower values (≤0.”
BackgroundRajan, A., Mahmoud, M. E., Wang, F., Bhattacharya, S., Mougharbel, A. S., Ma, X., Müller, A. B., Nisar, T., Taffa, D. H., Poblet, J. M., et al. (2022) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.2c00777 · Cited by 10
Costa, M. J. F., Gonçalves, A. A. S., Rinaldi, R., Bradtmüller, H., Eckert, H., & Ferreira, E. B. (2022) · Catalysis Communications · doi:10.1016/j.catcom.2022.106577 · Cited by 10
Miyake, K., Yamada, M., Sugiura, Y., Hirota, Y., Uchida, Y., & Nishiyama, N. (2015) · Journal of Porous Materials · doi:10.1007/s10934-015-0083-x · Cited by 10
Malakooti, R., Parsaee, Z., Hosseinabadi, R., Oskooie, H. A., Heravi, M. M., Saeedi, M., Amrollah, M., & Fallah, A. (2013) · Comptes Rendus Chimie · doi:10.1016/j.crci.2013.03.007 · Cited by 10
Chen, M., Qin, L., Wei, Y., Liu, Y., & Zhang, F. (2018) · Journal of Porous Materials · doi:10.1007/s10934-018-0603-6 · Cited by 10
Umegaki, T., Ogawa, R., Ohki, S., Tansho, M., Shimizu, T., & Kojima, Y. (2018) · Journal of Porous Materials · doi:10.1007/s10934-018-0665-5 · Cited by 10
Rizescu, C., Cojocaru, B., Hien, N. T., Huyen, P. T., & Parvulescu, V. I. (2019) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2019.03.020 · Cited by 10
Thermal and Hydrothermal Stability of Hierarchical Porous Silica Materials
Blin, J., Riachy, P., Carteret, C., & Lebeau, B. (2019) · European Journal of Inorganic Chemistry · doi:10.1002/ejic.201900228 · Cited by 10
Abdel-Galil, E. A., Eid, M. A., & El-Din, A. M. S. (2020) · Radiochimica Acta · doi:10.1515/ract-2020-0022 · Cited by 10
“08% between 31 and 200 °C, which may be resulted from the elimination of water physically adsorbed on the surface [40].”
BackgroundXu, S., Xing, X., Wu, H., Shi, X., Zhang, Z., & Gao, H. (2022) · Catalysis Letters · doi:10.1007/s10562-021-03897-x · Cited by 10
Luo, X., Tian, A., Ren, Z., Kong, H., & Wang, L. (2022) · Catalysis Letters · doi:10.1007/s10562-022-03929-0 · Cited by 10
Syntheses of micrometer-long Pt and Ag nanowires through SBA-15 templating
Kim, K.-J., Lee, E.-S., & Kwon, Y. (2012) · Journal of Nanoparticle Research · doi:10.1007/s11051-012-1270-1 · Cited by 10
“Even after the problem of Ag particles outside the pores is solved, the isolated Ag NWs from the SBA-15 template show the problem of bundling (Kruk et al. 2000; Impéror-Clerc et al. 2000; Galarneau et al. 2003).”
BackgroundPore Size Dependence of Melting Point for Kr Confined in Crystalline Carbon Pores
Morishige, K., & Mikawa, K. (2012) · The Journal of Physical Chemistry C · doi:10.1021/jp303985a · Cited by 10
Li, R., Zhang, M., Ya-ti, Y., Zhang, Z., Qin, R., Wang, L., Zheng, J., & Sun, X. (2014) · Desalination and Water Treatment · doi:10.1080/19443994.2014.927798 · Cited by 10
CO oxidation catalyzed by Ag/SBA-15 catalysts: Influence of the hydrothermal treatment
Guerba, H., Djellouli, B., Petit, C., & Pitchon, V. (2013) · Comptes Rendus Chimie · doi:10.1016/j.crci.2013.09.001 · Cited by 10
Preparation of Siliceous Vesicles with Adjustable Sizes, Wall Thickness, and Shapes
Yu, M., Zhang, J., Yuan, P., Wang, H., Liu, N., Wang, Y., & Yu, C. (2009) · Chemistry Letters · doi:10.1246/cl.2009.442 · Cited by 10
SBA-15 silicas containing sucrose
Barczak, M., Oszust, M., Borowski, P., Fekner, Z., & Zięba, E. (2011) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-011-1973-z · Cited by 10
Martinez, D. S. T., Damasceno, J. P. V., Franqui, L. S., Bettini, J., Mazali, Í. O., & Strauss, M. (2017) · Materials Science and Engineering C · doi:10.1016/j.msec.2017.03.298 · Cited by 10
Dynamics of encapsulated hepatitis B surface antigen
Rasmussen, M. K., Pereira, J. E. M., Berg, M. C., Iles, G. N., de Souza, N. R., Jalarvo, N., Botosso, V. F., Sant’Anna, O. A., Fantini, M. C. D. A., & Bordallo, H. N. (2019) · The European Physical Journal Special Topics · doi:10.1140/epjst/e2019-700103-x · Cited by 10
Kim, B., Yang, I., Jung, J. C., Lee, T. S., & Yeom, B. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2019.05.327 · Cited by 10
Enhanced desulfurization performance of hybrid membranes using embedded hierarchical porous SBA-15
Zhang, Y., Song, J. Z., Mayta, J. Q., Pan, F., Gao, X. P., Li, M., Song, Y., Wang, M., Cao, X., & Jiang, Z. (2019) · Frontiers of Chemical Science and Engineering · doi:10.1007/s11705-019-1830-3 · Cited by 10
Guillet‐Nicolas, R., Bérubé, F., Kim, T. W., Thommes, M., & Kleitz, F. (2008) · Studies in surface science and catalysis · doi:10.1016/s0167-2991(08)80165-6 · Cited by 10
Grabicka, B. E., & Jaroniec, M. (2010) · Adsorption · doi:10.1007/s10450-010-9233-2 · Cited by 10
Self-citationMesoporous Silica vs. Organosilica Composites to Desulfurize Diesel
Ribeiro, S. O., Granadeiro, C. M., Corvo, M. C., Pires, J., Campos‐Martín, J. M., de Castro, B., & Balula, S. S. (2019) · Frontiers in Chemistry · doi:10.3389/fchem.2019.00756 · Cited by 10
“reported in other POM-incorporated SBA-15 composites (Zhao et al., 1998; Kruk et al., 2000; Ribeiro et al., 2013b).”
One-step synthesis of mesoporous silica SBA-15 with ultra-high microporosity
Hung, S.-C., Lin, H., & Mou, C. (2003) · Studies in surface science and catalysis · doi:10.1016/s0167-2991(03)80338-5 · Cited by 10
Characterization and adsorptive application of ordered mesoporous silicas
Rockmann, R., & Kalies, G. (2007) · Applied Surface Science · doi:10.1016/j.apsusc.2006.12.105 · Cited by 10
López-Mendoza, M. A., Nava, R., Millán‐Malo, B. M., Peza-Ledesma, C. L., Huirache-Acuña, R., Morales-Ortuño, J. C., Guevara-Martínez, S. J., de León, J. N. D., & Rivera-Muñoz, E. M. (2023) · Chemical Engineering Journal Advances · doi:10.1016/j.ceja.2023.100454 · Cited by 9
Haidar, A., Belet, A., Goderis, B., Léonard, A. F., & Gommes, C. (2024) · Langmuir · doi:10.1021/acs.langmuir.4c01609 · Cited by 9
Pillared Interlayered Clays for Pollution Remediation
Pandey, P., & Saini, V. K. (2018) · Environmental chemistry for a sustainable world · doi:10.1007/978-3-319-92162-4_11 · Cited by 10
Jangra, S., Sharma, B., & Singh, S. (2020) · Materials Research Innovations · doi:10.1080/14328917.2020.1790181 · Cited by 10
“The presence of such weak peaks is attributed to the typical hexagonally arranged nanoporous structure of SBA-15 [43].”
BackgroundZhang, H., Wang, P., Shan, W., Xiong, Y., Xing, Z., & Yu, H. (2024) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2024.133792 · Cited by 9
Yoon, B. S., Youn, J.-R., Jung, W., Park, G.-J., Kang, D.-B., Choi, S.-B., Kim, S.-J., Kim, W., & Ko, C. H. (2025) · Applied Surface Science · doi:10.1016/j.apsusc.2025.162731 · Cited by 10
Self-citationFulvio, P. F., Grabicka, B. E., Grudzien, R. M., & Jaroniec, M. (2007) · Adsorption Science & Technology · doi:10.1260/026361707783908256 · Cited by 9
“…viz. the hydrophilic moieties of the triblock copolymer Pluronic 123 (EO20PO70EO20) penetrate the siliceous framework and their removal by calcination and/or extraction liberates the space occupied by these moieties in the form of randomly distributed micropores (Kruk et al. 2000; Joo et al. 2002).”
BackgroundSelf-citationAltukhov, O., & Kuo, S. (2015) · RSC Advances · doi:10.1039/c5ra01096a · Cited by 9
Meng, J., Fang, F., Feng, N., Wan, H. L., & Guan, G. (2020) · RSC Advances · doi:10.1039/c9ra08157g · Cited by 9
Joyce, P. M., Ulmefors, H., Garcia‐Bennett, A. E., & Prestidge, C. A. (2020) · Langmuir · doi:10.1021/acs.langmuir.0c00253 · Cited by 9
Nadem, S., Vahdati‐Khajeh, S., & Eftekhari‐Sis, B. (2020) · ChemistrySelect · doi:10.1002/slct.202000110 · Cited by 9
Chirra, S., Kalakuntala, R., Siliveri, S., Goskula, S., Gujjula, S. R., Yadav, D. N., Gurram, V. R. B., Suranani, S., & Venkatathri, N. (2021) · Materials Today Proceedings · doi:10.1016/j.matpr.2020.12.404 · Cited by 9
Iqbal, M. N., Robert‐Nicoud, G., Ciurans‐Oset, M., Akhtar, F., Hedin, N., & Bengtsson, T. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c16710 · Cited by 9
Huang, Z., Miao, H., Li, J., Wei, J.-L., Kawi, S., & Lai, M. W. (2013) · Separation and Purification Technology · doi:10.1016/j.seppur.2013.06.048 · Cited by 9
“Alternatively, the template removal can be achieved by means of solvent extraction and various modifications [7–11].”
Method
Metadata
- Authors
- Kruk, M., Jaroniec, M., Ko, C. H., & Ryoo, R.
- Affiliations
- Kent State University (US)
- Corresponding author
- Jaroniec, Mietek
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2000-06-20
- Volume
- 12
- Issue
- 7
- Pages
- 1961-1968
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2046430541
- Semantic Scholar
- 429da901cc5e824f6a481b7cd2c33f5a56537ed3
- Cited by
- 1,409
- References
- 66
- Citations by year
- 2026: 22 · 2025: 40 · 2024: 39 · 2023: 48 · 2022: 58 · 2021: 53 · 2020: 62 · 2019: 67 · 2018: 77 · 2017: 60 · 2016: 57 · 2015: 63 · 2014: 58 · 2013: 67 · 2012: 63
- FWCI
- 29.94
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Chemistry of Materials (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Materials Chemistry › Mesoporous Materials and Catalysis
- Physical Sciences › Chemistry › Inorganic Chemistry › Zeolite Catalysis and Synthesis
- Physical Sciences › Earth and Planetary Sciences › Geochemistry and Petrology › Clay minerals and soil interactions
- Keywords
- SBA-15, ordered mesoporous silica, synthesis temperature, washing effects, structural shrinkage, triblock copolymer template, pore accessibility, calcination
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.