Characterization of the Porous Structure of SBA-15
The DOI matches its Crossref record; 70 of the 70 references it cites were found in a registry or an index.
Abstract
SBA-15 ordered mesoporous silicas were synthesized using the method reported by Zhao et al. The structures of these materials were characterized using powder X-ray diffraction (XRD), thermogravimetric analysis (TGA), and nitrogen adsorption. The samples were found to exhibit structural properties similar to those reported earlier. Our study confirmed that the size of primary mesopores of SBA-15 can be tailored by the choice of synthesis temperature and that SBA-15 exhibits a significant amount of disordered micropores and small mesopores. The volume and size of these complementary pores were found to be dependent to some extent on the synthesis/aging temperature. It was shown that the washing of as-synthesized SBA-15 in water or ethanol was accompanied by an appreciable structural shrinkage and led to the removal of a significant part of the polymeric template. Therefore, washing needs to be avoided if one wants to isolate SBA-15 without appreciable loss of the template. It was confirmed that water-washed SBA-15 samples have fully accessible primary mesopores. Ethanol-washed samples also were found to exhibit accessible porosity. Despite an appreciable content of the template in the water- and ethanol-washed samples, their pore sizes were usually larger than those of the calcined materials. The observed structural properties of SBA-15 and their dependence on the synthesis temperature and washing were attributed to the changes in the degree of penetration of the poly(ethylene oxide) chains of the triblock copolymer template within the siliceous walls of SBA-15.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“For example, with the aid of trimethylbenzene (TMB), the pore size of silica can be expanded to 30 nm [158].”
From Block Copolymers: Synthesis, Self-Assembly, and Applications (2017) · cites this paper as [158]
Citations
Cites
Sing, K. S. W. (1985) · Pure and Applied Chemistry · doi:10.1351/pac198557040603 · Cited by 24,485
Triblock Copolymer Syntheses of Mesoporous Silica with Periodic 50 to 300 Angstrom Pores
Zhao, D., Feng, J., Huo, Q., Melosh, N., Fredrickson, G. H., Chmelka, B. F., & Stucky, G. D. (1998) · Science · doi:10.1126/science.279.5350.548 · Cited by 11,753
Zhao, D., Huo, Q., Feng, J., Chmelka, B. F., & Stucky, G. D. (1998) · Journal of the American Chemical Society · doi:10.1021/ja974025i · Cited by 6,697
Younan Xia, A., & Whitesides, G. M. (1998) · Angewandte Chemie International Edition · doi:10.1002/(sici)1521-3773(19980316)37:5<667::aid-anie667>3.0.co;2-h · Cited by 4,672
Generalized syntheses of large-pore mesoporous metal oxides with semicrystalline frameworks
Yang, P., Zhao, D., Margolese, D. I., Chmelka, B. F., & Stucky, G. D. (1998) · Nature · doi:10.1038/24132 · Cited by 2,493
Evaporation-Induced Self-Assembly: Nanostructures Made Easy
Brinker, C. J., Lu, Y., Sellinger, A., & Fan, H. (1999) · Advanced Materials · doi:10.1002/(sici)1521-4095(199905)11:7<555::aid-adma555>3.0.co;2-e · Cited by 2,112
Evaporation-Induced Self-Assembly: Nanostructures Made Easy
Brinker, C. J., Lu, Y., Sellinger, A., & Fan, H. (1999) · Advanced Materials · doi:10.1002/(sici)1521-4095(199905)11:7<579::aid-adma579>3.0.co;2-r · Cited by 2,079
Alexandridis, P., & Alan Hatton, T. (1995) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/0927-7757(94)03028-x · Cited by 1,920
Surfactant Control of Phases in the Synthesis of Mesoporous Silica-Based Materials
Huo, Q., Margolese, D. I., & Stucky, G. D. (1996) · Chemistry of Materials · doi:10.1021/cm960137h · Cited by 1,567
Wanka, G., Hoffmann, H., & Ulbricht, W. (1994) · Macromolecules · doi:10.1021/ma00093a016 · Cited by 1,496
Research works printed but not linked: 3
- Bagshaw S. A., 1995, J. Science, 269, 1242
- Bae S. J., 1999, Chem. Commun., 31
- Ryoo R., J. Phys. Chem. B, submitted for publication.
Cited by
Items 101–200 of 1,000
CO2 capture using triamine-grafted SBA-15: The impact of the support pore structure
Jahandar Lashaki, M., & Sayari, A. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.10.103 · Cited by 161
PHYSICAL ADSORPTION CHARACTERIZATION OF ORDERED AND AMORPHOUS MESOPOROUS MATERIALS
Thommes, M. (2004) · Series on chemical engineering · doi:10.1142/9781860946561_0011 · Cited by 158
Fuertes, A. B. (2004) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2003.11.012 · Cited by 158
Lee, H. I., Kim, J. H., Stucky, G. D., Shi, Y., Pak, C., & Kim, J. M. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm00820f · Cited by 155
Functionalization of mesoporous materials for lanthanide and actinide extraction
Florek, J., Giret, S., Juère, E., Larivière, D., & Kleitz, F. (2016) · Dalton Transactions · doi:10.1039/c6dt00474a · Cited by 168
Periodic Mesoporous Organosilica with Large Cagelike Pores
de Matos, J. R., Kruk, M., Mercuri, L. P., Jaroniec, M., Asefa, T., Coombs, N. A., Ozin, G. A., Kamiyama, T., & Terasaki, O. (2002) · Chemistry of Materials · doi:10.1021/cm025513e · Cited by 155
Self-citationTailoring properties of SBA-15 materials by controlling conditions of hydrothermal synthesis
Fulvio, P. F., Pikus, S., & Jaroniec, M. (2005) · Journal of Materials Chemistry · doi:10.1039/b511346f · Cited by 154
Self-citationCapillary condensation of nitrogen in MCM-41 and SBA-15
Morishige, K., & Ito, M. (2002) · The Journal of Chemical Physics · doi:10.1063/1.1510440 · Cited by 153
Epping, J. D., & Chmelka, B. F. (2006) · Current Opinion in Colloid & Interface Science · doi:10.1016/j.cocis.2005.12.002 · Cited by 163
“[147] Kruk M, Jaroniec M, Ko CH, Ryoo R.”
BackgroundIde, M., El-Roz, M., Canck, E. D., Vicente, A., Planckaert, T., Bogaerts, T., Driessche, I. V., Lynen, F., Speybroeck, V. V., Thibault‐Starzyk, F., et al. (2012) · Physical Chemistry Chemical Physics · doi:10.1039/c2cp42811c · Cited by 148
Jiang, T., Wang, Y., Wang, K., Liang, Y., Wu, D., Tsiakaras, P. E., & Song, S. (2016) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2016.02.009 · Cited by 146
Kim, S. S., Karkamkar, A., Pinnavaia, T. J., Kruk, M., & Jaroniec, M. (2001) · The Journal of Physical Chemistry B · doi:10.1021/jp010773p · Cited by 146
Self-citationChen, F., Zhou, W., Yao, H., Fan, P., Yang, J., Fei, Z., & Zhong, M. (2013) · Green Chemistry · doi:10.1039/c3gc41080c · Cited by 146
Song, Y., Jiang, H., Wang, B., Kong, Y., & Chen, J. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b18136 · Cited by 144
Brandhuber, D., Torma, V., Raab, C., Peterlik, H., Kulak, A. N., & Hüsing, N. (2005) · Chemistry of Materials · doi:10.1021/cm048483j · Cited by 144
Lee, J., Lee, D., Oh, E., Kim, J., Kim, Y., Jin, S., Kim, H., Hwang, Y., Kwak, J. H., Park, J., et al. (2005) · Angewandte Chemie International Edition · doi:10.1002/anie.200502995 · Cited by 146
Salis, A., Meloni, D., Ligas, S., Casula, M. F., Monduzzi, M., Solinas, V., & Dumitriu, E. (2005) · Langmuir · doi:10.1021/la047225y · Cited by 143
New Strategy to Synthesis of Hierarchical Mesoporous Zeolites
Gu, F., Wei, F., Yang, J. Y., Lin, N., Lin, W. G., Wang, Y., & Zhu, J. H. (2010) · Chemistry of Materials · doi:10.1021/cm903785r · Cited by 143
Pd/SiO2 catalysts: synthesis of Pd nanoparticles with the controlled size in mesoporous silicas
Yuranov, I. A., Moeckli, P., Suvorova, E. I., Buffat, P. A., Kiwi‐Minsker, L., & Renken, A. (2003) · Journal of Molecular Catalysis A Chemical · doi:10.1016/s1381-1169(02)00441-7 · Cited by 143
Selective synthesis of fatty monoglycerides by using functionalised mesoporous catalysts
Pérez‐Pariente, J., Dı́az, I., Mohino, F., & Sastre, E. (2003) · Applied Catalysis A General · doi:10.1016/s0926-860x(03)00481-2 · Cited by 140
Fornés, V., López, C., López, H. H., & Martı́nez, A. (2003) · Applied Catalysis A General · doi:10.1016/s0926-860x(03)00226-6 · Cited by 140
Consecutive Generation of Mesopores and Micropores in SBA-15
Yang, C., Zibrowius, B., Schmidt, W. N., & Schüth, F. (2003) · Chemistry of Materials · doi:10.1021/cm031109j · Cited by 140
Guo, Y., Li, K., Yu, X., & Clark, J. H. (2008) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2007.12.020 · Cited by 139
Calcination and thermal degradation mechanisms of triblock copolymer template in SBA-15 materials
Bérubé, F., & Kaliaguine, S. (2008) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2008.02.028 · Cited by 138
Study of the Formation of the Mesoporous Material SBA-15 by EPR Spectroscopy
Ruthstein, S., Frydman, V., Kababya, S., Landau, M. V., & Goldfarb, D. (2003) · The Journal of Physical Chemistry B · doi:10.1021/jp021964a · Cited by 137
Synthesis of 5‐Hydroxymethylfurural from Carbohydrates using Large‐Pore Mesoporous Tin Phosphate
Dutta, A., Gupta, D., Patra, A. K., Saha, B., & Bhaumik, A. (2014) · ChemSusChem · doi:10.1002/cssc.201300766 · Cited by 137
Courbon, E., D’Ans, P., Permyakova, A., Skrylnyk, O., Steunou, N., Degrez, M., & Frère, M. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.01.041 · Cited by 136
Newalkar, B. L., & Komarneni, S. (2001) · Chemistry of Materials · doi:10.1021/cm0103038 · Cited by 136
Ghampson, I. T., Sepúlveda, C., García, R. A., Fierro, J. L. G., Escalona, N., & DeSisto, W. J. (2012) · Applied Catalysis A General · doi:10.1016/j.apcata.2012.05.039 · Cited by 135
Deposition of Pd into mesoporous silica SBA-15 using supercritical carbon dioxide
Morère, J., Tenorio, M. J., Torralvo, M. J., Pando, C., Renuncio, J. A. R., & Cabañas, A. (2010) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2010.12.012 · Cited by 132
Smarsly, B. M., & Antonietti, M. (2006) · European Journal of Inorganic Chemistry · doi:10.1002/ejic.200501003 · Cited by 132
Dynamics of CO 2 Adsorption on Amine Adsorbents. 2. Insights Into Adsorbent Design
Bollini, P., Brunelli, N. A., Didas, S. A., & Jones, C. W. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie3017913 · Cited by 140
Proton Affinity and Heat of Formation of Vinyloxy [CH2CHO]. and Acetonyl [CH2COCH3]. Radicals
Bouchoux, G., Chamot‐Rooke, J., Leblanc, D., Mourgues, P., & Sablier, M. (2001) · ChemPhysChem · doi:10.1002/1439-7641(20010417)2:4<219::aid-cphc219>3.0.co;2-k · Cited by 39
Self-citationCatalytic activity of Fe/SBA-15 for ozonation of dimethyl phthalate in aqueous solution
Huang, R., Yan, H., Li, L., Deng, D., Shu, Y., & Zhang, Q. (2011) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2011.05.041 · Cited by 131
SANS Investigation of Nitrogen Sorption in Porous Silica
Smarsly, B. M., Göltner, C. G., Antonietti, M., Ruland, W., & Hoinkis, E. (2001) · The Journal of Physical Chemistry B · doi:10.1021/jp003105x · Cited by 131
Newalkar, B. L., Choudary, N. V., Kumar, P., Komarneni, S., & Bhat, T. S. G. (2001) · Chemistry of Materials · doi:10.1021/cm0106466 · Cited by 130
Influence of the block length of triblock copolymers on the formation of mesoporous silica
Flodström, K., & Alfredsson, V. (2003) · Microporous and Mesoporous Materials · doi:10.1016/s1387-1811(03)00308-1 · Cited by 129
Zhu, J., Wang, T., Xu, X., Xiao, P., & Li, J. (2012) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2012.11.005 · Cited by 128
López-Muñoz, M. J., van Grieken, R., Aguado, J., & Marugán, J. (2005) · Catalysis Today · doi:10.1016/j.cattod.2005.03.017 · Cited by 127
Urea removal strategies for dialysate regeneration in a wearable artificial kidney
van Gelder, M. K., Jong, J. A. W., Folkertsma, L., Guo, Y., Blȕchel, C., Verhaar, M. C., Odijk, M., van Nostrum, C. F., Hennink, W. E., & Gerritsen, K. G. F. (2020) · Biomaterials · doi:10.1016/j.biomaterials.2019.119735 · Cited by 129
The influence of textural properties on the adsorption of hydrogen on ordered nanostructured carbons
Gadiou, R., Saadallah, S.-E., Piquero, T., David, P., Parmentier, J., & Vix‐Guterl, C. (2004) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2004.10.034 · Cited by 142
Smarsly, B. M., Polarz, S., & Antonietti, M. (2001) · The Journal of Physical Chemistry B · doi:10.1021/jp011905h · Cited by 126
A novel synthetic route for negatively charged ordered mesoporous silica SBA-15
Yang, C., Zibrowius, B., & Schüth, F. (2003) · Chemical Communications · doi:10.1039/b304626e · Cited by 126
Reactive adsorption of sulfur compounds in diesel on nickel supported on mesoporous silica
Park, J. G., Ko, C. H., Yi, K. B., Park, J., Han, S., Cho, S., & Kim, J. (2007) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2007.12.014 · Cited by 126
Self-citationRadical-Facilitated Green Synthesis of Highly Ordered Mesoporous Silica Materials
Feng, G., Wang, J., Boronat, M., Li, Y., Su, J., Huang, J., Ma, Y., & Yu, J. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b00093 · Cited by 125
Methylene blue photodegradation over titania-decorated SBA-15
Acosta-Silva, Y. J., Nava, R., Hernández-Morales, V., Macías-Sánchez, S. A., Gómez-Herrera, M. L., & Pawelec, B. (2011) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2011.08.032 · Cited by 125
Li, M., Coenjarts, C. A., & Ober, C. K. (2005) · Springer eBooks · doi:10.1007/12_003 · Cited by 128
Properties of Nitrogen-Functionalized Ordered Mesoporous Carbon Prepared Using Polypyrrole Precursor
Shrestha, S., & Mustain, W. E. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3489412 · Cited by 120
Nature of Capillary Condensation and Evaporation Processes in Ordered Porous Materials
Grosman, A., & Ortega, C. (2005) · Langmuir · doi:10.1021/la051030o · Cited by 120
A Review on Chemical Methodologies for Preparation of Mesoporous Silica and Alumina Based Materials
Naik, B., & Ghosh, N. N. (2009) · Recent Patents on Nanotechnology · doi:10.2174/187221009789177768 · Cited by 119
Jang, J., Lim, B., Lee, J., & Hyeon, T. (2001) · Chemical Communications · doi:10.1039/b006197m · Cited by 119
Das, S., & Daud, W. M. A. W. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.07.046 · Cited by 118
RetractedKruk, M., Antochshuk, V., de Matos, J. R., Mercuri, L. P., & Jaroniec, M. (2002) · Journal of the American Chemical Society · doi:10.1021/ja0170854 · Cited by 118
Self-citationHicks, J. C., Dabestani, R., Buchanan, A. C., & Jones, C. W. (2006) · Chemistry of Materials · doi:10.1021/cm061382w · Cited by 118
Macias, E. E., Ratnasamy, P., & Carreón, M. A. (2012) · Catalysis Today · doi:10.1016/j.cattod.2012.03.034 · Cited by 118
Yang, L., Qi, Y., Yuan, X., Shen, J., & Kim, J. (2005) · Journal of Molecular Catalysis A Chemical · doi:10.1016/j.molcata.2004.11.024 · Cited by 118
Reuse and recycling of amine-functionalized silica materials for CO2 adsorption
Sanz-Pérez, E. S., Dantas, T. C. M., Arencibia, A., Calleja, G., Guedes, A. P. M. A., de Araujo, A. S., & Sanz, R. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.09.109 · Cited by 117
Major advances in the development of ordered mesoporous materials
Szczęśniak, B., Choma, J., & Jaroniec, M. (2020) · Chemical Communications · doi:10.1039/d0cc02840a · Cited by 122
Self-citationRapid synthesis of mesoporous SBA-15 molecular sieve by a microwave–hydrothermal process
Newalkar, B. L., Komarneni, S., & Katsuki, H. (2000) · Chemical Communications · doi:10.1039/b007441l · Cited by 115
Dutta, A., Patra, A. K., Dutta, S., Saha, B., & Bhaumik, A. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm30623a · Cited by 115
Manukyan, K. V., Chen, Y., Rouvimov, S., Li, P., Li, X., Dong, S., Liu, X., Furdyna, J. K., Orlov, A. O., Bernstein, G. H., et al. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp504733r · Cited by 113
Guo, K., Fan, G., Gu, D., Yu, S., Ma, K., Liu, A., Tan, W., Wang, J., Du, X., Zou, W., et al. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b15688 · Cited by 113
Mesoporous TiO2/SiO2 composite nanofibers with selective photocatalytic properties
Zhan, S., Chen, D., Jiao, X., & Song, Y. (2007) · Chemical Communications · doi:10.1039/b618905a · Cited by 115
Physisorbed films in periodic mesoporous silica studied byin situsynchrotron small-angle diffraction
Zickler, G. A., Jähnert, S., Wagermaier, W., Funari, S. S., Findenegg, G. H., & Paris, O. (2006) · Physical Review B · doi:10.1103/physrevb.73.184109 · Cited by 121
Enhancement of Hydrothermal Stability and CO2 Adsorption of Mg-MOF-74/MCF Composites
Xin, C., Ren, Y., Zhang, Z., Liu, L., Wang, X., & Yang, J. (2021) · ACS Omega · doi:10.1021/acsomega.1c00098 · Cited by 110
Pore Size Control of Highly Ordered Mesoporous Silica MCM-48
Widenmeyer, M., & Anwander, R. (2002) · Chemistry of Materials · doi:10.1021/cm011273b · Cited by 110
Controlling the textural parameters of mesoporous carbon materials
Vinu, A., Srinivasu, P., Takahashi, M., Mori, T., Balasubramanian, V. V., & Ariga, K. (2006) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2006.10.008 · Cited by 110
CoMo/Ti-SBA-15 catalysts for dibenzothiophene desulfurization
Nava, R., Ortega, R. A., Alonso-Núñez, G., Ornelas, C., Pawelec, B., & Fierro, J. L. G. (2007) · Catalysis Today · doi:10.1016/j.cattod.2007.02.034 · Cited by 109
Amor, T. B., Vidal, L., Lebeau, B., & Marichal, C. (2011) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2011.12.016 · Cited by 108
Han, J., Fang, P., Jiang, W., Li, L., & Guo, R. H. (2012) · Langmuir · doi:10.1021/la204503b · Cited by 108
A Novel Route toward the Synthesis of High-Quality Large-Pore Periodic Mesoporous Organosilicas
Bao, X. Y., Zhao, X., Li, X., Chia, P. A., & Li, J. (2004) · The Journal of Physical Chemistry B · doi:10.1021/jp037342m · Cited by 106
de Matos, J. R., Mercuri, L. P., Kruk, M., & Jaroniec, M. (2002) · Langmuir · doi:10.1021/la0155294 · Cited by 106
Self-citationMesoporous Silica-Based Materials for Electronics-Oriented Applications
Laskowski, Ł., Laskowska, M., Vilà, N., Schabikowski, M., & Walcarius, A. (2019) · Molecules · doi:10.3390/molecules24132395 · Cited by 108
“The structural parameters of SBA-15, such as the diameter of pores, microporosity and the thickness of walls, can be modified by tuning parameters of the synthesis [33].”
BackgroundChen, X., & Vereecken, P. M. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201800899 · Cited by 107
Shi, Z., Su, Q., Ying, T., Tan, X., Deng, L., Dong, L., & Cheng, W. (2020) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2020.101162 · Cited by 105
Hydrothermal preparation of hierarchical ZIF-L nanostructures for enhanced CO2 capture
Ding, B., Wang, X., Xu, Y., Feng, S., Ding, Y., Pan, Y., Xu, W., & Wang, H. (2018) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2018.02.047 · Cited by 103
Convenient synthesis of ordered mesoporous silica at room temperature and quasi-neutral pH
Jammaer, J. A. G., Aerts, A., D’Haen, J., Seo, J. W., & Martens, J. A. (2009) · Journal of Materials Chemistry · doi:10.1039/b915273c · Cited by 103
Ordered mesoporous silicates as matrices for controlled release of drugs
Ukmar, T., & Planinšek, O. (2010) · Acta Pharmaceutica · doi:10.2478/v1007-010-0037-4 · Cited by 102
“Characterization of the structure of mesoporous silicates is essential for understanding and predicting their macroscopic physical and chemical properties (15).”
BackgroundSBA-15 mesoporous material modified with APTES as the carrier for 2-(3-benzoylphenyl)propionic acid
Moritz, M., & Łaniecki, M. (2012) · Applied Surface Science · doi:10.1016/j.apsusc.2012.04.076 · Cited by 102
Oxygen Sensors Based on Mesoporous Silica Particles on Layer-by-Layer Self-assembled Films
Han, B., Ian Manners, A., & Winnik, M. A. (2005) · Chemistry of Materials · doi:10.1021/cm047770k · Cited by 102
Cellobiose hydrolysis using organic–inorganic hybrid mesoporous silica catalysts
Bootsma, J. A., & Shanks, B. H. (2007) · Applied Catalysis A General · doi:10.1016/j.apcata.2007.03.039 · Cited by 117
Darmstadt, H., Roy, C., Kaliaguine, S., Kim, T., & Ryoo, R. (2003) · Chemistry of Materials · doi:10.1021/cm020673b · Cited by 102
Self-citationAbidat, I., Bouchenafa-Saib, N., Habrioux, A., Comminges, C., Canaff, C., Rousseau, J., Napporn, T. W., Dambournet, D., Borkiewicz, O. J., & Kokoh, K. B. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta04437e · Cited by 101
Shah, P., Ramaswamy, A. V., Lázár, K., & Ramaswamy, V. (2004) · Applied Catalysis A General · doi:10.1016/j.apcata.2004.06.039 · Cited by 101
Yang, C., Lin, H., Zibrowius, B., Spliethoff, B., Schüth, F., Liou, S., Chu, M., & Chen, C. (2007) · Chemistry of Materials · doi:10.1021/cm070036r · Cited by 101
Wei, Y. L., Wang, Y. M., Zhu, J. H., & Wu, Z. (2003) · Advanced Materials · doi:10.1002/adma.200305803 · Cited by 101
Hua, Y., Jiang, T., Wang, K., Wu, M. M., Song, S., Wang, Y., & Tsiakaras, P. E. (2016) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2016.04.056 · Cited by 100
Determination of Mesopore Size Distributions from Argon Adsorption Data at 77 K
Kruk, M., & Jaroniec, M. (2002) · The Journal of Physical Chemistry B · doi:10.1021/jp0137423 · Cited by 100
Self-citationToncón-Leal, C. F., Rocha, J. V., Silva, M. T. P., Braga, T. P., & Sapag, K. (2021) · Adsorption · doi:10.1007/s10450-021-00342-8 · Cited by 99
“Figure 1 shows the N2 adsorption–desorption isotherm at 77 K with hysteresis loop scanning curves for SBA-15 material (SBET = 560 m2·g−1), which corresponds to an isotherm Type IV and a hysteresis loop Type H1 that is characteristic of materials with a well-defined mesoporous structure, which has a narrow pore size di…”
BackgroundMargelefsky, E. L., Bendjériou, A., Zeidan, R. K., Dufaud, V., & Davis, M. E. (2008) · Journal of the American Chemical Society · doi:10.1021/ja804082m · Cited by 99
Acid strength variation due to spatial location of organosulfonic acid groups on mesoporous silica
Mbaraka, I. K., & Shanks, B. H. (2006) · Journal of Catalysis · doi:10.1016/j.jcat.2006.09.001 · Cited by 97
Dimethyl ether synthesis over alumina based catalysts
Tokay, K. C., Doğu, T., & Doğu, G. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.12.034 · Cited by 97
Toward the Synthesis of Extra-Large-Pore MCM-41 Analogues
de Matos, J. R., Mercuri, L. P., Kruk, M., & Jaroniec, M. (2001) · Chemistry of Materials · doi:10.1021/cm000964p · Cited by 97
Self-citationRezaei, F., Sakwa‐Novak, M. A., Bali, S., Duncanson, D. M., & Jones, C. W. (2014) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2014.10.047 · Cited by 98
Grafting of Alumina on SBA-15: Effect of Surface Roughness
Zukal, A., Šiklová, H., & Čejka, J. (2008) · Langmuir · doi:10.1021/la801547u · Cited by 96
Synthesis of siliceous materials with micro- and mesoporosity
Meynen, V., Cool, P., & Vansant, E. F. (2007) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2006.12.003 · Cited by 96
Direct hydrothermal synthesis of mesoporous Sn-SBA-15 materials under weak acidic conditions
Shah, P., Ramaswamy, A. V., Lázár, K., & Ramaswamy, V. (2006) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2006.10.042 · Cited by 95
Gas Adsorption in Mesoporous Micelle-Templated Silicas: MCM-41, MCM-48, and SBA-15
Coasne, B., Galarneau, A., Renzo, F. D., & Pellenq, R. J. ‐. (2006) · Langmuir · doi:10.1021/la061728h · Cited by 104
Sol Gel-Derived SBA-16 Mesoporous Material
Rivera-Muñoz, E. M., & Huirache-Acuña, R. (2010) · International Journal of Molecular Sciences · doi:10.3390/ijms11093069 · Cited by 94
“Extraction is a mild and efficient method to remove surfactants and to get porosities without distinct effects on frameworks [5,16].”
MethodAcidic Mesoporous Silica for the Catalytic Conversion of Fatty Acids in Beef Tallow
Mbaraka, I. K., McGuire, K. J., & Shanks, B. H. (2006) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0601089 · Cited by 94
Metadata
- Authors
- Kruk, M., Jaroniec, M., Ko, C. H., & Ryoo, R.
- Affiliations
- Kent State University (US)
- Corresponding author
- Jaroniec, Mietek
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2000-06-20
- Volume
- 12
- Issue
- 7
- Pages
- 1961-1968
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2046430541
- Semantic Scholar
- 429da901cc5e824f6a481b7cd2c33f5a56537ed3
- Cited by
- 1,409
- References
- 66
- Citations by year
- 2026: 22 · 2025: 40 · 2024: 39 · 2023: 48 · 2022: 58 · 2021: 53 · 2020: 62 · 2019: 67 · 2018: 77 · 2017: 60 · 2016: 57 · 2015: 63 · 2014: 58 · 2013: 67 · 2012: 63
- FWCI
- 29.94
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Chemistry of Materials (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Materials Chemistry › Mesoporous Materials and Catalysis
- Physical Sciences › Chemistry › Inorganic Chemistry › Zeolite Catalysis and Synthesis
- Physical Sciences › Earth and Planetary Sciences › Geochemistry and Petrology › Clay minerals and soil interactions
- Keywords
- SBA-15, ordered mesoporous silica, synthesis temperature, washing effects, structural shrinkage, triblock copolymer template, pore accessibility, calcination
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.