Characterization of the Porous Structure of SBA-15
The DOI matches its Crossref record; 70 of the 70 references it cites were found in a registry or an index.
Abstract
SBA-15 ordered mesoporous silicas were synthesized using the method reported by Zhao et al. The structures of these materials were characterized using powder X-ray diffraction (XRD), thermogravimetric analysis (TGA), and nitrogen adsorption. The samples were found to exhibit structural properties similar to those reported earlier. Our study confirmed that the size of primary mesopores of SBA-15 can be tailored by the choice of synthesis temperature and that SBA-15 exhibits a significant amount of disordered micropores and small mesopores. The volume and size of these complementary pores were found to be dependent to some extent on the synthesis/aging temperature. It was shown that the washing of as-synthesized SBA-15 in water or ethanol was accompanied by an appreciable structural shrinkage and led to the removal of a significant part of the polymeric template. Therefore, washing needs to be avoided if one wants to isolate SBA-15 without appreciable loss of the template. It was confirmed that water-washed SBA-15 samples have fully accessible primary mesopores. Ethanol-washed samples also were found to exhibit accessible porosity. Despite an appreciable content of the template in the water- and ethanol-washed samples, their pore sizes were usually larger than those of the calcined materials. The observed structural properties of SBA-15 and their dependence on the synthesis temperature and washing were attributed to the changes in the degree of penetration of the poly(ethylene oxide) chains of the triblock copolymer template within the siliceous walls of SBA-15.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“For example, with the aid of trimethylbenzene (TMB), the pore size of silica can be expanded to 30 nm [158].”
From Block Copolymers: Synthesis, Self-Assembly, and Applications (2017) · cites this paper as [158]
Citations
Cites
Sing, K. S. W. (1985) · Pure and Applied Chemistry · doi:10.1351/pac198557040603 · Cited by 24,485
Triblock Copolymer Syntheses of Mesoporous Silica with Periodic 50 to 300 Angstrom Pores
Zhao, D., Feng, J., Huo, Q., Melosh, N., Fredrickson, G. H., Chmelka, B. F., & Stucky, G. D. (1998) · Science · doi:10.1126/science.279.5350.548 · Cited by 11,753
Zhao, D., Huo, Q., Feng, J., Chmelka, B. F., & Stucky, G. D. (1998) · Journal of the American Chemical Society · doi:10.1021/ja974025i · Cited by 6,697
Younan Xia, A., & Whitesides, G. M. (1998) · Angewandte Chemie International Edition · doi:10.1002/(sici)1521-3773(19980316)37:5<667::aid-anie667>3.0.co;2-h · Cited by 4,672
Generalized syntheses of large-pore mesoporous metal oxides with semicrystalline frameworks
Yang, P., Zhao, D., Margolese, D. I., Chmelka, B. F., & Stucky, G. D. (1998) · Nature · doi:10.1038/24132 · Cited by 2,493
Evaporation-Induced Self-Assembly: Nanostructures Made Easy
Brinker, C. J., Lu, Y., Sellinger, A., & Fan, H. (1999) · Advanced Materials · doi:10.1002/(sici)1521-4095(199905)11:7<555::aid-adma555>3.0.co;2-e · Cited by 2,112
Evaporation-Induced Self-Assembly: Nanostructures Made Easy
Brinker, C. J., Lu, Y., Sellinger, A., & Fan, H. (1999) · Advanced Materials · doi:10.1002/(sici)1521-4095(199905)11:7<579::aid-adma579>3.0.co;2-r · Cited by 2,079
Alexandridis, P., & Alan Hatton, T. (1995) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/0927-7757(94)03028-x · Cited by 1,920
Surfactant Control of Phases in the Synthesis of Mesoporous Silica-Based Materials
Huo, Q., Margolese, D. I., & Stucky, G. D. (1996) · Chemistry of Materials · doi:10.1021/cm960137h · Cited by 1,567
Wanka, G., Hoffmann, H., & Ulbricht, W. (1994) · Macromolecules · doi:10.1021/ma00093a016 · Cited by 1,496
Research works printed but not linked: 3
- Bagshaw S. A., 1995, J. Science, 269, 1242
- Bae S. J., 1999, Chem. Commun., 31
- Ryoo R., J. Phys. Chem. B, submitted for publication.
Cited by
Items 601–700 of 1,000
Aktas, O., Yaşyerli, S., Doğu, G., & Doğu, T. (2010) · Industrial & Engineering Chemistry Research · doi:10.1021/ie901672b · Cited by 28
Lee, Y.-G., Oh, C., Yoo, S. D., Koo, S., & Oh, S. (2005) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2005.07.012 · Cited by 28
Synthesis and structural investigations on aluminium-free Ti-Beta/SBA-15 composite
Mazaj, M., Stevens, W. J. J., Logar, N. Z., Ristić, A., Tušar, N. N., Arčon, I., Daneu, N., Meynen, V., Cool, P., Vansant, E. F., et al. (2008) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2008.07.025 · Cited by 28
Lu, A., Li, W., Schmidt, W. N., & Schüth, F. (2006) · Journal of Materials Chemistry · doi:10.1039/b607542h · Cited by 28
Comparison of textural information from argon(87 K) and nitrogen(77 K) physisorption
Šolcová, O., Matějová, L., Topka, P., Musilová, Z., & Schneider, P. (2010) · Journal of Porous Materials · doi:10.1007/s10934-010-9409-x · Cited by 28
Mesoscale Characterization of Nanoparticles Distribution Using X‐ray Scattering
Gommes, C., Prieto, G., Zečević, J., Vanhalle, M., Goderis, B., de Jong, K. P., & de Jongh, P. E. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201505359 · Cited by 28
Giuseppe, A. D., Nicola, C. D., Pettinari, R., Ferino, I., Meloni, D., Passacantando, M., & Crucianelli, M. (2013) · Catalysis Science & Technology · doi:10.1039/c3cy00126a · Cited by 28
Sakwa‐Novak, M. A., Holewinski, A., Hoyt, C. B., Yoo, C., Chai, S., Dai, S., & Jones, C. W. (2015) · Langmuir · doi:10.1021/acs.langmuir.5b02114 · Cited by 28
Surfactant-Templated Synthesis of Ordered Silicas with Closed Cylindrical Mesopores
Mandal, M., & Kruk, M. (2011) · Chemistry of Materials · doi:10.1021/cm202577g · Cited by 28
Self-citationGatti, G., Costenaro, D., Vittoni, C., Paul, G., Crocellà, V., Mangano, E., Brandani, S., Bordiga, S., Cossi, M., Marchese, L., et al. (2017) · Physical Chemistry Chemical Physics · doi:10.1039/c6cp08048k · Cited by 31
A novel geopolymer route to porous carbon: high CO 2 adsorption capacity
Pei, Y., Choi, G., Asahina, S., Yang, J., Vinu, A., & Choy, J. (2019) · Chemical Communications · doi:10.1039/c9cc00232d · Cited by 29
Fattori, N., Maroneze, C. M., da Costa, L. P., Strauss, M., Mazali, Í. O., & Gushikem, Y. (2012) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2012.11.022 · Cited by 29
High specific surface area ordered mesoporous silica COK-12 with tailored pore size
Henning, L. M., Cubas, D. D., Colmenares, M. G., Schmidt, J., Bekheet, M. F., Pauw, B. R., Gurlo, A., & Simon, U. (2019) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2019.01.050 · Cited by 27
Molecular Engineering To Enhance Reactivity and Selectivity in an Ultrafast Photoclick Reaction
Fu, Y., Simeth, N. A., Toyoda, R., Brilmayer, R., Szymański, W., & Feringa, B. L. (2023) · Angewandte Chemie International Edition · doi:10.1002/anie.202218203 · Cited by 28
Gaudio, P. D., Cicco, F. D., Sansone, F., Aquino, R. P., Adami, R., Ricci, M., & Giovagnoli, S. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.07.064 · Cited by 27
About the thermal stability and pore elimination in the ordered hexagonal mesoporous silica SBA-15
Silveira, T., Awano, C. M., Donatti, D. A., de Vicente, F. S., & Vollet, D. R. (2014) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2014.02.023 · Cited by 27
Mapping the location of grafted PNIPAAM in mesoporous SBA-15 silica using gas adsorption analysis
Reichhardt, N., Guillet‐Nicolas, R., Thommes, M., Klösgen, B., Nylander, T., Kleitz, F., & Alfredsson, V. (2012) · Physical Chemistry Chemical Physics · doi:10.1039/c2cp22523a · Cited by 27
Synthesis and characterization of high surface area TiO2/SiO2 mesostructured nanocomposite
Bonne, M., Pronier, S., Can, F., Courtois, X., Valange, S., Tatibouët, J., Royer, S., Marécot, P., & Duprez, D. (2009) · Solid State Sciences · doi:10.1016/j.solidstatesciences.2009.10.009 · Cited by 27
Antonietti, M. (2006) · Philosophical Transactions of the Royal Society A Mathematical Physical and Engineering Sciences · doi:10.1098/rsta.2006.1857 · Cited by 27
“The negatively charged silica precursors (silicic acid and oligomers) interact with the cationic head groups of the surfactants (Impéror-Clerc et al. 2000; Kruk et al. 2000; Ryoo et al. 2000; Smarsly et al. 2005).”
BackgroundPark, J.-H., Kim, S.-K., Kim, H. S., Cho, Y. J., Park, J., Lee, K. E., Yoon, C. W., Nam, S., & Kang, S. O. (2013) · Chemical Communications · doi:10.1039/c3cc46758a · Cited by 27
Chaperonin-Inspired pH Protection by Mesoporous Silica SBA-15 on Myoglobin and Lysozyme
Lynch, M. M., Liu, J., Nigra, M. M., & Coppens, M. (2016) · Langmuir · doi:10.1021/acs.langmuir.6b02832 · Cited by 27
CMK-5-Based High Energy Density Electrical Double Layer Capacitor for AC Line Filtering
Ji, N., Park, J., & Kim, W. (2019) · ACS Omega · doi:10.1021/acsomega.9b03024 · Cited by 27
Maroneze, C. M., Magosso, H. A., Panteleimonov, A., Kholin, Y. V., & Gushikem, Y. (2010) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2010.12.030 · Cited by 26
Liu, H., Wang, L., Feng, W., Cao, L., Gao, X., Liu, H., & Xu, C. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie302604m · Cited by 26
Halder, M., Bhanja, P., Islam, M. M., Bhaumik, A., & Islam, S. M. (2018) · New Journal of Chemistry · doi:10.1039/c8nj01745j · Cited by 26
Xu, L., Nie, R., Chen, X., Li, Y., Jiang, Y., & Lü, X. (2020) · Catalysis Science & Technology · doi:10.1039/d0cy01969k · Cited by 26
Abdolahi, B., Gholivand, M. B., Shamsipur, M., & Amiri, M. (2022) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2022.164185 · Cited by 26
Morishige, K. (2022) · Langmuir · doi:10.1021/acs.langmuir.1c03219 · Cited by 26
Valdés-Sánchez, L., Borrego-González, S., Montero-Sánchez, A., Massalini, S., de la Cerda, B., Díaz‐Cuenca, A., & Diaz-Corrales, F. J. J. (2022) · Journal of Clinical Medicine · doi:10.3390/jcm11082170 · Cited by 27
“The textural parameters, surface area, and nanopore size were calculated according to the accepted methods in the literature [40].”
MethodLiang, Y., He, J., An, Y., Zhang, J., Park, G., Zhao, L., Oh, R., Huang, X. J., Dong, J., & Liu, L. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.149670 · Cited by 26
“2 c and d exhibited N 2 -adsorption – desorption isotherms of IV-type with H 1 hysteresis loops and pore size distribution curves of the mesoporous materials, which were consistent with the commercial SBA-15 support [27].”
Lei, Z., Bai, S., Dang, L., Xia, H., Xu, Q. F., Cao, Y., An, L., Zhao, M., Lo, A.-Y., & Liu, S.-B. (2009) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2009.04.014 · Cited by 26
Chemisorption of hydrogen sulphide on zinc oxide modified aluminum-substituted SBA-15
Wang, X., Jia, J., Zhao, L., & Sun, T. (2008) · Applied Surface Science · doi:10.1016/j.apsusc.2008.02.086 · Cited by 27
Influence of synthesis temperature on the structural characteristics of mesoporous silica
Andrada, A. D. S., & de Sousa, E. M. B. (2006) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2006.03.080 · Cited by 26
Hydrogen storage in 2NaBH4+MgH2 mixtures: Destabilization by additives and nanoconfinement
Mulas, G., Campesi, R., Garroni, S., Napolitano, E., Milanese, C., Dolci, F., Pellicer, E., Baró, M. D., & Marini, A. M. (2011) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2011.12.042 · Cited by 26
Mesoporous Silica–Zirconia Systems for Catalytic Applications
Ghedini, E., Signoretto, M., Pinna, F., & Cruciani, G. (2008) · Catalysis Letters · doi:10.1007/s10562-008-9459-8 · Cited by 26
Meynen, V., Segura, Y., Mertens, M., Cool, P., & Vansant, E. F. (2005) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2005.05.035 · Cited by 26
Morphology Variations of Plugged Hexagonal Templated Silica
Bavel, E. V., Cool, P., Aerts, K., & Vansant, E. F. (2005) · Journal of Porous Materials · doi:10.1007/s10934-005-5235-y · Cited by 26
Multistep impregnation method for incorporation of high amount of titania into SBA-15
Wang, W., & Song, M. (2005) · Materials Research Bulletin · doi:10.1016/j.materresbull.2005.07.034 · Cited by 26
Reitz, C., Leufke, P. M., Schneider, R., Hahn, H., & Brezesinski, T. (2014) · Chemistry of Materials · doi:10.1021/cm5028282 · Cited by 25
Salvi, H. M., & Yadav, G. D. (2019) · Biocatalysis and Agricultural Biotechnology · doi:10.1016/j.bcab.2019.101038 · Cited by 25
Mesoporous Silica–Fe3O4 Nanoparticle Composites as Potential Drug Carriers
Losito, D. W., de Araújo, D. R., Bezzon, V. D. N., Filho, P. L. O., Fonseca, F. L. A., Chagas, C. D. S., da Silva, E. B., Oliveira, C. L. P., Fantini, M. C. D. A., Ferreira, F. F., et al. (2021) · ACS Applied Nano Materials · doi:10.1021/acsanm.1c02861 · Cited by 25
Ragavan, R., & Pandurangan, A. (2022) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2022.111959 · Cited by 25
López-Mendoza, M. A., Nava, R., Peza-Ledesma, C. L., Millán‐Malo, B. M., Huirache-Acuña, R., Skewes, P., & Rivera-Muñoz, E. M. (2015) · Catalysis Today · doi:10.1016/j.cattod.2015.07.049 · Cited by 26
Controlling Wall Thickness of Silica Nanotubes within 4-nm Precision
Ji, Q., Iwaura, R., & Shimizu, T. (2004) · Chemistry Letters · doi:10.1246/cl.2004.504 · Cited by 25
Positron annihilation study of pore size in ordered SBA-15
Andrada, A. D. S., de Souza, K. C., Reis, S. C., de Sousa, R. G., Windmöller, D., Machado, J. C., & de Sousa, E. M. B. (2008) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2008.06.104 · Cited by 25
Mesoporous Carbon Materials with Ultra‐Thin Pore Walls and Highly Dispersed Nickel Nanoparticles
Fulvio, P. F., Liang, C., Dai, S., & Jaroniec, M. (2009) · European Journal of Inorganic Chemistry · doi:10.1002/ejic.200800675 · Cited by 25
Self-citationChang-Chien, C.-Y., Hsu, C., Lee, T., Liu, C., Wu, S., Lin, H., Tang, C., & Lin, C. (2007) · European Journal of Inorganic Chemistry · doi:10.1002/ejic.200700210 · Cited by 25
Morishige, K. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp108036q · Cited by 25
Structure and thermal stability in hydrophobic Pluronic F127-modified silica aerogels
Fermino, T. Z., Awano, C. M., Moreno, L. X., Vollet, D. R., & de Vicente, F. S. (2018) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2018.03.039 · Cited by 25
Synthesis of high surface area mesoporous silica SBA‐15 for hydrogen storage application
Bera, B., & Das, N. (2018) · International Journal of Applied Ceramic Technology · doi:10.1111/ijac.13082 · Cited by 25
Metallic ruthenium incorporation in the porous structure of SBA-15 using a sonochemical method
Zhu, S., Zhou, H. S., Hibino, M., & Honma, I. (2003) · Journal of Materials Chemistry · doi:10.1039/b301084h · Cited by 25
Dong, X., Wang, L., Wang, W., Jiang, G., Chen, Y., Zhao, Z., & Wang, J. (2005) · Macromolecular Materials and Engineering · doi:10.1002/mame.200400262 · Cited by 25
Zinc(II)-benzoato complexes immobilised in mesoporous silica host
Zeleňák, V., Hornebecq, V., & Llewellyn, P. L. (2005) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2005.03.022 · Cited by 25
The Synthesis of Mesoporous Molecular Sieves
(2007) · Studies in surface science and catalysis · doi:10.1016/s0167-2991(07)80796-8 · Cited by 29
Ramiro‐Gutiérrez, M. L., Will, J., Boccaccini, A. R., & Díaz‐Cuenca, A. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34968 · Cited by 24
“The textural parameters were calculated using accepted methods in the literature.(16)”
MethodAkondi, A. M., Kantam, M. L., Trivedi, R., Sreedhar, B., Buddana, S. K., Prakasham, R. S., & Bhargava, S. K. (2014) · Journal of Molecular Catalysis A Chemical · doi:10.1016/j.molcata.2014.02.012 · Cited by 24
Nasiriani, T., Nazeri, M. T., & Shaabani, A. (2023) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2023.112514 · Cited by 24
A trimodal porous carbon as an effective catalyst for hydrogen production by methane decomposition
Shen, Y. Q., & Lua, A. C. (2015) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2015.09.050 · Cited by 24
Park, S., & Prasetyanto, E. A. (2008) · Topics in Catalysis · doi:10.1007/s11244-008-9152-6 · Cited by 24
Synthesis of ultrastable ordered mesoporous aluminosilicates molecular sieves with “hard template”
Luo, Y., Hou, Z., Li, R., & Zheng, X. (2007) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2007.06.022 · Cited by 24
Sharma, A., Wilson, G. R., & Dubey, A. (2015) · New Journal of Chemistry · doi:10.1039/c5nj01536g · Cited by 24
Mesoporous metal - silica materials: Synthesis, catalytic and thermal properties
Manukyan, K. V., Yeghishyan, A. V., Shuck, C. E., Moskovskikh, D. O., Rouvimov, S., Wolf, E. E., & Mukasyan, A. S. (2017) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2017.08.044 · Cited by 24
Hou, L., Feng, F., You, W., Xu, P., Luo, F., Tian, B., Zhou, H., & Li, X. (2018) · Journal of Chromatography A · doi:10.1016/j.chroma.2018.04.006 · Cited by 24
Bhattacharjee, S., Lu, W.-Y., & Tan, C. (2019) · Fuel · doi:10.1016/j.fuel.2019.01.100 · Cited by 24
An experimental and modelling study of water vapour adsorption on SBA-15
Centineo, A., Nguyen, H. G. T., Espinal, L., Horn, J. C., & Brandani, S. (2019) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2019.03.018 · Cited by 25
Lee, J., Lee, D., Oh, E., Kim, J., Kim, Y., Jin, S., Kim, H., Hwang, Y., Kwak, J. H., Park, J., et al. (2005) · Angewandte Chemie · doi:10.1002/ange.200502995 · Cited by 24
Selective Oxidations Catalyzed by Mesoporous Metal Silicates
Kholdeeva, O. A. (2013) · Wiley eBooks · doi:10.1002/9781118356760.ch4 · Cited by 24
Ardagh, M. A., Bregante, D. T., Flaherty, D. W., & Notestein, J. M. (2020) · ACS Catalysis · doi:10.1021/acscatal.0c02937 · Cited by 26
Okonye, L. U., Yao, Y., Hildebrandt, D., & Meijboom, R. (2020) · Sustainable Energy & Fuels · doi:10.1039/d0se01442g · Cited by 23
Kang, K., & Rhee, H. (2005) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2005.05.022 · Cited by 23
Liu, K., Fu, H., Shi, K., Xin, B., Jing, L., & Zhou, W. (2006) · Nanotechnology · doi:10.1088/0957-4484/17/15/004 · Cited by 23
Dombrowski, J. P., Johnson, G. R., Bell, A. T., & Tilley, T. D. (2016) · Dalton Transactions · doi:10.1039/c6dt01676f · Cited by 23
QENS and NMR Study of Water Dynamics in SBA-15 with a Low Water Content
Kiwilsza, A., Pajzderska, A., Gonzalez, M. A., Mielcarek, J., & Wąsicki, J. W. (2015) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b02672 · Cited by 23
Khodaei, M. M., & Dehghan, M. (2019) · Polyhedron · doi:10.1016/j.poly.2019.01.060 · Cited by 23
Wang, Y., ALAUZUN, J. G., & Mutin, P. H. (2020) · Chemistry of Materials · doi:10.1021/acs.chemmater.9b05095 · Cited by 23
Wang, B., Chen, Z., Jiang, T., Yu, J., Yang, H., Duan, A., & Xu, C. (2022) · Fuel · doi:10.1016/j.fuel.2022.124516 · Cited by 23
Effect of organosilane/polymer ratio on adsorption properties of periodic mesoporous ethane-silica
Grudzien, R. M., Grabicka, B. E., & Jaroniec, M. (2006) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2006.10.021 · Cited by 23
Self-citationSynthetic Chemistry of the Inorganic Ordered Porous Materials
Huo, Q. (2010) · Elsevier eBooks · doi:10.1016/b978-0-444-53599-3.10016-2 · Cited by 24
Gommes, C., Friedrich, H., de Jongh, P. E., & de Jong, K. P. (2009) · Acta Materialia · doi:10.1016/j.actamat.2009.09.055 · Cited by 23
Zhou, H. S., Yamada, T., Asai, K., Honma, I., Uchida, H., & Katsube, T. (2001) · Japanese Journal of Applied Physics · doi:10.1143/jjap.40.7098 · Cited by 23
Zeolite-templated Pt/C electrocatalysts
Coker, E. N., Steen, W. A., & Miller, J. E. (2007) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2007.02.044 · Cited by 24
Meynen, V., Cool, P., Vansant, E. F., Kortunov, P. V., Grinberg, F., Kärger, J., Mertens, M., Lebedev, O. I., & Tendeloo, G. V. (2006) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2006.08.029 · Cited by 23
Kleitz, F. (2008) · Handbook of Heterogeneous Catalysis · doi:10.1002/9783527610044.hetcat0011 · Cited by 23
Rudolf, C., Abi-Ghaida, F. M., Drăgoi, B., Ungureanu, A., Mehdi, A., & Dumitriu, E. (2015) · Catalysis Science & Technology · doi:10.1039/c5cy00428d · Cited by 22
Morishige, K. (2013) · Langmuir · doi:10.1021/la402365e · Cited by 22
Fedyna, M., Śliwa, M., Jaroszewska, K., Kępiński, L., & Trawczyński, J. (2019) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2019.109701 · Cited by 22
Xu, X. M., He, J., Zeng, Y., Yu, C., & Zhang, F. (2020) · European Polymer Journal · doi:10.1016/j.eurpolymj.2020.109724 · Cited by 22
Preparation of SBA-15 and Zr-SBA-15 materials by direct-synthesis and pH-adjustment methods
Colmenares-Zerpa, J., Chimentão, R. J., Gispert‐Guirado, F., Peixoto, A. F. R. O., & Llorca, J. (2021) · Materials Letters · doi:10.1016/j.matlet.2021.130326 · Cited by 22
Martynenko, E. A., Vostrikov, S. V., & Андреевич, П. А. (2021) · Reaction Kinetics Mechanisms and Catalysis · doi:10.1007/s11144-021-02037-1 · Cited by 27
Olejnik, A., & Gościańska, J. (2021) · Materials Science and Engineering C · doi:10.1016/j.msec.2021.112438 · Cited by 23
“9 representing the (110) and (200) planes, respectively [42].”
Eco-friendly and facile synthesis of size-controlled spherical silica particles from rice husk
Kim, S., Park, J. Y., Gu, Y. M., Jang, I.-S., Park, H., Oh, K. K., Lee, J. H., & Chun, J. (2021) · Nanoscale Advances · doi:10.1039/d1na00668a · Cited by 22
Woo, J., Lim, J. S., Lim, T., Baek, D. S., Kim, J. H., Lee, J., Jeong, H. Y., Choi, C. H., & Joo, S. H. (2022) · EES Catalysis · doi:10.1039/d2ey00055e · Cited by 22
Vandarkuzhali, S. A. A., Gopalsamy, K., & Pachamuthu, M. P. (2024) · Materials Science and Engineering B · doi:10.1016/j.mseb.2024.117208 · Cited by 22
Kierys, A., Zaleski, R., Gorgol, M., & Goworek, J. (2013) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2013.05.022 · Cited by 22
A novel approach for synthesizing ordered mesoporous silica SBA-15
Lu, B., & Kawamoto, K. (2012) · Materials Research Bulletin · doi:10.1016/j.materresbull.2012.03.020 · Cited by 22
Template occluded SBA-15: An effective dissolution enhancer for poorly water-soluble drug
Fu, T., Liwei, G., Kang, L., Tianyao, W., & Jin, L. (2010) · Applied Surface Science · doi:10.1016/j.apsusc.2010.05.007 · Cited by 22
Ekou, T., Especel, C., & Royer, S. (2011) · Catalysis Today · doi:10.1016/j.cattod.2011.05.016 · Cited by 22
Zhao, S., Su, D., Che, J., Jiang, B., & Orlov, A. (2011) · Materials Letters · doi:10.1016/j.matlet.2011.07.053 · Cited by 22
The removal of template from SBA-15 samples synthesized from different silica sources
Yılmaz, M. S., & Pişkin, S. (2015) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-015-4568-2 · Cited by 22
“Thermal calcination [20, 21], oxidative ozone treatment [22], microwave digestion [23], extraction by an organic solvent [24–26], and supercritical fluid extraction [27] methods have all been previously applied for removal of organic template.”
MethodDing, Y., Yin, G., Liao, X., Huang, Z., Chen, X., & Yao, Y. (2012) · Materials Letters · doi:10.1016/j.matlet.2012.01.091 · Cited by 22
Metadata
- Authors
- Kruk, M., Jaroniec, M., Ko, C. H., & Ryoo, R.
- Affiliations
- Kent State University (US)
- Corresponding author
- Jaroniec, Mietek
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2000-06-20
- Volume
- 12
- Issue
- 7
- Pages
- 1961-1968
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2046430541
- Semantic Scholar
- 429da901cc5e824f6a481b7cd2c33f5a56537ed3
- Cited by
- 1,409
- References
- 66
- Citations by year
- 2026: 22 · 2025: 40 · 2024: 39 · 2023: 48 · 2022: 58 · 2021: 53 · 2020: 62 · 2019: 67 · 2018: 77 · 2017: 60 · 2016: 57 · 2015: 63 · 2014: 58 · 2013: 67 · 2012: 63
- FWCI
- 29.94
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Chemistry of Materials (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Materials Chemistry › Mesoporous Materials and Catalysis
- Physical Sciences › Chemistry › Inorganic Chemistry › Zeolite Catalysis and Synthesis
- Physical Sciences › Earth and Planetary Sciences › Geochemistry and Petrology › Clay minerals and soil interactions
- Keywords
- SBA-15, ordered mesoporous silica, synthesis temperature, washing effects, structural shrinkage, triblock copolymer template, pore accessibility, calcination
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.