Characterization of the Porous Structure of SBA-15
The DOI matches its Crossref record; 70 of the 70 references it cites were found in a registry or an index.
Abstract
SBA-15 ordered mesoporous silicas were synthesized using the method reported by Zhao et al. The structures of these materials were characterized using powder X-ray diffraction (XRD), thermogravimetric analysis (TGA), and nitrogen adsorption. The samples were found to exhibit structural properties similar to those reported earlier. Our study confirmed that the size of primary mesopores of SBA-15 can be tailored by the choice of synthesis temperature and that SBA-15 exhibits a significant amount of disordered micropores and small mesopores. The volume and size of these complementary pores were found to be dependent to some extent on the synthesis/aging temperature. It was shown that the washing of as-synthesized SBA-15 in water or ethanol was accompanied by an appreciable structural shrinkage and led to the removal of a significant part of the polymeric template. Therefore, washing needs to be avoided if one wants to isolate SBA-15 without appreciable loss of the template. It was confirmed that water-washed SBA-15 samples have fully accessible primary mesopores. Ethanol-washed samples also were found to exhibit accessible porosity. Despite an appreciable content of the template in the water- and ethanol-washed samples, their pore sizes were usually larger than those of the calcined materials. The observed structural properties of SBA-15 and their dependence on the synthesis temperature and washing were attributed to the changes in the degree of penetration of the poly(ethylene oxide) chains of the triblock copolymer template within the siliceous walls of SBA-15.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“For example, with the aid of trimethylbenzene (TMB), the pore size of silica can be expanded to 30 nm [158].”
From Block Copolymers: Synthesis, Self-Assembly, and Applications (2017) · cites this paper as [158]
Citations
Cites
Sing, K. S. W. (1985) · Pure and Applied Chemistry · doi:10.1351/pac198557040603 · Cited by 24,485
Triblock Copolymer Syntheses of Mesoporous Silica with Periodic 50 to 300 Angstrom Pores
Zhao, D., Feng, J., Huo, Q., Melosh, N., Fredrickson, G. H., Chmelka, B. F., & Stucky, G. D. (1998) · Science · doi:10.1126/science.279.5350.548 · Cited by 11,753
Zhao, D., Huo, Q., Feng, J., Chmelka, B. F., & Stucky, G. D. (1998) · Journal of the American Chemical Society · doi:10.1021/ja974025i · Cited by 6,697
Younan Xia, A., & Whitesides, G. M. (1998) · Angewandte Chemie International Edition · doi:10.1002/(sici)1521-3773(19980316)37:5<667::aid-anie667>3.0.co;2-h · Cited by 4,672
Generalized syntheses of large-pore mesoporous metal oxides with semicrystalline frameworks
Yang, P., Zhao, D., Margolese, D. I., Chmelka, B. F., & Stucky, G. D. (1998) · Nature · doi:10.1038/24132 · Cited by 2,493
Evaporation-Induced Self-Assembly: Nanostructures Made Easy
Brinker, C. J., Lu, Y., Sellinger, A., & Fan, H. (1999) · Advanced Materials · doi:10.1002/(sici)1521-4095(199905)11:7<555::aid-adma555>3.0.co;2-e · Cited by 2,112
Evaporation-Induced Self-Assembly: Nanostructures Made Easy
Brinker, C. J., Lu, Y., Sellinger, A., & Fan, H. (1999) · Advanced Materials · doi:10.1002/(sici)1521-4095(199905)11:7<579::aid-adma579>3.0.co;2-r · Cited by 2,079
Alexandridis, P., & Alan Hatton, T. (1995) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/0927-7757(94)03028-x · Cited by 1,920
Surfactant Control of Phases in the Synthesis of Mesoporous Silica-Based Materials
Huo, Q., Margolese, D. I., & Stucky, G. D. (1996) · Chemistry of Materials · doi:10.1021/cm960137h · Cited by 1,567
Wanka, G., Hoffmann, H., & Ulbricht, W. (1994) · Macromolecules · doi:10.1021/ma00093a016 · Cited by 1,496
Research works printed but not linked: 3
- Bagshaw S. A., 1995, J. Science, 269, 1242
- Bae S. J., 1999, Chem. Commun., 31
- Ryoo R., J. Phys. Chem. B, submitted for publication.
Cited by
Items 801–900 of 1,000
Two‐ and Three‐Dimensional Mesoporous Iron Oxides with Microporous Walls
Jiao, F., & Bruce, P. G. (2004) · Angewandte Chemie · doi:10.1002/ange.200460826 · Cited by 18
Liu, Y., Chen, J., & Sun, Y. (2005) · Studies in surface science and catalysis · doi:10.1016/s0167-2991(05)80215-0 · Cited by 18
Zukerman, R., Vradman, L., Titelman, L., Weidenthaler, C., Landau, M. V., & Herskowitz, M. (2008) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2008.04.011 · Cited by 18
Carbon Dioxide Mediated Synthesis of Mesoporous Silica Films: Tuning Properties using Pressure
Li, X., & Vogt, B. D. (2008) · Chemistry of Materials · doi:10.1021/cm8003479 · Cited by 18
Kovtareva, S. Y., Копишев, Э. Е., Zhang, H., & Filippov, S. K. (2025) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2025.114654 · Cited by 17
Continuous-flow synthesis of mesoporous SBA-15
Parlett, C. M. A., Arandiyan, H., Durndell, L. J., Isaacs, M. A., Lopez, A. T., Wong, R. J., Wilson, K., & Lee, A. F. (2021) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2021.111535 · Cited by 17
Kruk, M., de Matos, J. R., & Jaroniec, M. (2004) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2004.04.009 · Cited by 17
Self-citationLinking Silica Support Morphology to the Dynamics of Aminopolymers in Composites
Carrillo, J. Y., Potter, M. E., Sakwa‐Novak, M. A., Pang, S. H., Jones, C. W., & Sumpter, B. G. (2017) · Langmuir · doi:10.1021/acs.langmuir.7b00283 · Cited by 17
Spatial Distribution of Enzymes Immobilized in Mesoporous Silicas for Biocatalysis
Gomes, M. Z. D. V., Zadeh, P. S. N., Palmqvist, A. E. C., & Åkerman, B. (2019) · ACS Applied Nano Materials · doi:10.1021/acsanm.9b01736 · Cited by 17
Gómez, J. J. A., Toncón-Leal, C. F., dos Santos, A. J., Moreno, M. S., Sapag, K., & Martínez-Huitle, C. A. (2019) · Materials Letters X · doi:10.1016/j.mlblux.2019.100034 · Cited by 17
Density functional theory model of adsorption on amorphous and microporous solids
(2007) · Studies in surface science and catalysis · doi:10.1016/s0167-2991(07)80003-6 · Cited by 17
Synthesis and characterization of the SBA-15/carbon cryogel nanocomposites
Babić, B., Kokunešoski, M., Miljković, M. S., Prekajski, M., Matović, B. Z., Gulicovski, J., & Bučevac, D. (2012) · Ceramics International · doi:10.1016/j.ceramint.2012.02.078 · Cited by 17
Pugazhenthiran, N., Sekar, R., Kumar, P. S., & Anandan, S. (2009) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2009.12.017 · Cited by 17
Hu, S., Zhu, J., Wu, Y., Xie, R., Wu, K., & Yang, M. (2017) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2017.11.021 · Cited by 17
Montiel-Centeno, K., Barrera, D., Rocha, J. V., Gómez, J. J. A., Moreno, M. S., & Sapag, K. (2019) · Chemical Engineering Communications · doi:10.1080/00986445.2019.1615469 · Cited by 17
“%) can be attributed to the simultaneous decomposition of P123 and dehydroxylation of superficial OH groups (Kruk et al., 2000; Zhuravlev, 2000; Wang et al., 2005).”
BackgroundJaramillo, L. Y., Henao, W., & Romero‐Sáez, M. (2020) · Journal of Porous Materials · doi:10.1007/s10934-020-00930-z · Cited by 16
Lim, J. S., Kim, J., Lee, K., Jin, Y., & Joo, S. H. (2023) · Electrochimica Acta · doi:10.1016/j.electacta.2023.142031 · Cited by 16
Investigation of chromium oxide clusters grafted on SBA-15 using Cr-polycation sol
Charan, P. H. K., & Rao, G. R. (2012) · Journal of Porous Materials · doi:10.1007/s10934-012-9577-y · Cited by 16
Tao, B., & Fletcher, A. J. (2014) · Separation and Purification Technology · doi:10.1016/j.seppur.2014.01.013 · Cited by 16
Wach, A., Drozdek, M., Dudek, B., Łątka, P., & Kuśtrowski, P. (2016) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2016.02.034 · Cited by 16
Li, H., Li, S., Tian, P., Wu, Z.-F., & Li, Z. (2017) · Molecules · doi:10.3390/molecules22030377 · Cited by 13
“It is known that ethanol extraction is a mild and efficient method to remove surfactants during the preparation of the mesoporous silica material [59].”
MethodAntioxidant properties of probucol released from mesoporous silica
Lau, M., Giri, K., & Garcia‐Bennett, A. E. (2019) · European Journal of Pharmaceutical Sciences · doi:10.1016/j.ejps.2019.105038 · Cited by 16
Sorption of Ce(III) by Silica SBA-15 and Titanosilicate ETS-10 from Aqueous Solution
Zinicovscaia, I. I., Yushin, N. S., Humelnicu, D., Grozdov, D., Ignat, M., Demčák, Š., & Humelnicu, I. (2021) · Water · doi:10.3390/w13223263 · Cited by 16
Porosity and Surface Properites of SBA-15 with Grafted PNIPAAM: A Water Sorption Calorimetry Study
Reichhardt, N., Nylander, T., Klösgen, B., Alfredsson, V., & Kocherbitov, V. (2011) · Langmuir · doi:10.1021/la203093u · Cited by 16
Smith, M. A., & Lobo, R. F. (2006) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2005.09.006 · Cited by 16
Doménech‐Carbó, A., Garcı́a, H., Marquet, J., Bourdelande, J. L., & Herance, J. R. (2006) · Electrochimica Acta · doi:10.1016/j.electacta.2006.01.029 · Cited by 16
Hermida, L., Abdullah, A. Z., & Mohamed, A. R. (2011) · Journal of Porous Materials · doi:10.1007/s10934-011-9538-x · Cited by 16
“This parameter corresponds to the distance between the centres of adjacent mesopores according to the formula, a = 4 9 3d200 [29].”
BackgroundMethodInfluentialAnunziata, O. A., Costa, M. B. G., & Martínez, M. L. (2008) · Catalysis Today · doi:10.1016/j.cattod.2007.12.073 · Cited by 16
Wang, W., Li, T., Ye, K., Long, H. B., Wang, X., & Ru, H. (2016) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2016.07.036 · Cited by 16
Borrego-González, S., Romero-Sánchez, L. B., Blázquez, J., & Díaz‐Cuenca, A. (2017) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2017.08.010 · Cited by 17
Zhu, S., Zhou, H. S., Hibino, M., Honma, I., & Ichihara, M. (2004) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2004.07.010 · Cited by 16
Physicochemical and catalytic properties of grafted vanadium species on different mesoporous silicas
Tsoncheva, T., Ivanova, L., Dimitrova, R., & Rosenholm, J. M. (2008) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2008.02.035 · Cited by 16
Stability and Growth of Methane Hydrates in Confined Media for Carbon Sequestration
Denning, S., Majid, A. A. A., & Koh, C. A. (2022) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.2c02936 · Cited by 15
Shao, J., Zhao, Y., Li, D., Xu, S., Dou, Z., Sun, Z., Cao, M., Fu, K., Liu, Y., & Zhou, Y. (2022) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2022.112240 · Cited by 15
Kohns, R., Torres-Rodríguez, J., Euchler, D., Seyffertitz, M., Paris, O., Reichenauer, G., Enke, D., & Hüsing, N. (2023) · Gels · doi:10.3390/gels9010071 · Cited by 15
“Thanks to this chemical interaction between silica walls and template, the complete removal of the surfactant by solvent extraction is hampered [34].”
BackgroundSelf‐Assembled Supported Ionic Liquids
Tavera‐Méndez, C., Bergen, A., Trzeciak, S., Heinemann, F. W., Graf, R., Zahn, D., Meyer, K., Hartmann, M., & Wisser, D. (2023) · Chemistry - A European Journal · doi:10.1002/chem.202303673 · Cited by 15
Wagner, L. Q., da Costa, E. P., Glatthaar, C., Breckwoldt, F., Zecca, M., Centomo, P., Huang, X., Kübel, C., Schlaad, H., Kriechbaum, M., et al. (2023) · Chemistry of Materials · doi:10.1021/acs.chemmater.3c01255 · Cited by 15
An, S., Joo, J. S., & Lee, J. (2011) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2011.09.026 · Cited by 15
Structures of Silica‐Based Nanoporous Materials Revealed by Microscopy
Han, L., Ohsuna, T., Liu, Z. P., Alfredsson, V., Kjellman, T., Asahina, S., Suga, M., Ma, Y., Oleynikov, P., Miyasaka, K., et al. (2014) · Zeitschrift für anorganische und allgemeine Chemie · doi:10.1002/zaac.201300538 · Cited by 15
The importance of raw graphite size to the capacitive properties of graphene oxide
Yu, H., Xie, K., Hu, J., Shen, C., Wang, J., & Wei, B. (2016) · RSC Advances · doi:10.1039/c5ra24501j · Cited by 15
Long, H., Wang, W., Li, T., & Ru, H. (2016) · Ceramics International · doi:10.1016/j.ceramint.2016.10.201 · Cited by 16
Photocatalytic decomposition of Rhodamine B on uranium-doped mesoporous titanium dioxide
Liu, Y., Becker, B., Brandon, B., Sigmon, G. E., & Burns, P. C. (2017) · RSC Advances · doi:10.1039/c7ra01385j · Cited by 15
Cho, E. H., Kim, M.-J., Yoon, B. S., Kim, J. H., Song, D., Koo, K. Y., Jung, U. H., Jeon, S., Park, Y., & Ko, C. H. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.135166 · Cited by 15
Self-citationMohamed, N. A. N., Han, Y., Hector, A. L., Houghton, A. R., Hunter‐Sellars, E., Reid, G., Williams, D. R., & Zhang, W. (2022) · Langmuir · doi:10.1021/acs.langmuir.1c02854 · Cited by 15
Murali, A., Chang, Z., Koodali, R. T., Krishna, R. M., Kurshev, V., & Kevan, L. (2002) · The Journal of Physical Chemistry B · doi:10.1021/jp014325t · Cited by 15
Bromate removal from aqueous solutions by ordered mesoporous carbon
Xu, C., Wang, X., Shi, X., Lin, S., Zhu, L., & Chen, Y. (2013) · Environmental Technology · doi:10.1080/09593330.2013.857725 · Cited by 15
“OMC was synthesized according to the procedure reported by Jun et al. [25] First, SBA-15 was synthesized using the amphiphilic triblock copolymer poly (ethylene glycol)-block-poly (propylene glycol)-block-poly (ethylene glycol) (EO20PO70EO20; average molecular weight, 5800; Aldrich).”
MethodInfluentialFulvio, P. F., Vinu, A., & Jaroniec, M. (2009) · The Journal of Physical Chemistry C · doi:10.1021/jp902749p · Cited by 15
Self-citationDSC estimation of structural and textural parameters of SBA-15 silica using water probe
da Silva, L. C. C., de Araújo, G. L. B., Segismundo, N. R., Filho, E. M., Mercuri, L. P., Cosentino, I. C., Fantini, M. C. D. A., & Matos, J. R. (2009) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-009-0334-7 · Cited by 15
“8 range, a high relative pressure, similarly to good-quality mesoporous materials [21, 22].”
BackgroundWang, W., Shan, W., Yue, X., & Ru, H. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm14866h · Cited by 15
Yi, J., & Kruk, M. (2015) · Langmuir · doi:10.1021/acs.langmuir.5b01182 · Cited by 15
Self-citationWang, Q., Wang, Z., Zheng, T., Xiongping, Z., Chen, W., Ma, D., Yang, Y. Q., & Huang, S. (2016) · Nano Research · doi:10.1007/s12274-016-1116-8 · Cited by 15
“by replication using mesoporous silica (MCM-48, SBA-1, and SBA-15, respectively) as hard templates, which often consist of three steps: (1) infiltrating the silica with carbon precursors, (2) carbonizing the produced composite at a high temperature, and (3) removing the silica templates [13, 14].”
MethodScreening of active solid catalysts for esterification of tall oil fatty acids with methanol
Kocík, J., Samikannu, A., Bourajoini, H., Pham, T. N., Mikkola, J., Hájek, M., & Čapek, L. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.09.174 · Cited by 15
Formic Acid Production Via Methane Peroxide Oxidation Over Oxalic Acid Activated Fe-MFI Catalysts
Тaran, О. P., Yashnik, S. A., Boltenkov, V. V., Parkhomchuk, E. V., Sashkina, K. A., Ayusheev, A. B., Babushkin, D. E., & Parmon, V. N. (2019) · Topics in Catalysis · doi:10.1007/s11244-019-01151-8 · Cited by 15
Adsorption of lysozyme and trypsin onto mesoporous silica materials
Yang, J., Daehler, A., Stevens, G. W., & O’Connor, A. J. (2003) · Studies in surface science and catalysis · doi:10.1016/s0167-2991(03)80498-6 · Cited by 15
Yadavi, M., Badiei, A., Ziarani, G. M., & Abbasi, A. (2013) · Chemical Papers · doi:10.2478/s11696-013-0357-1 · Cited by 15
New mesoporous carbon materials synthesized by a templating procedure
Babić, B., Kokunešoski, M., Miljković, M. S., Matović, B. Z., Gulicovski, J., Stojmenović, M. D., & Bučevac, D. (2012) · Ceramics International · doi:10.1016/j.ceramint.2012.10.254 · Cited by 15
“certain amount of micropores, which connect neighboring mesopores [8–11].”
BackgroundLiquid adsorption of n-octane/octanol/ethanol on SBA-16 silica
Rockmann, R., & Kalies, G. (2007) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2007.06.029 · Cited by 15
Pérez-Hermosillo, I. J., Ojeda-López, R., Domı́nguez-Ortiz, A., & Esparza-Schulz, J. M. (2023) · Materialia · doi:10.1016/j.mtla.2023.101725 · Cited by 14
Crozzolin, M., Belloni, C., Xu, J., Nakanishi, T., Ueda, J., Tanabe, S., Dallo, F., Balliana, E., Saorin, A., Rizzolio, F., et al. (2024) · Journal of Materials Chemistry C · doi:10.1039/d4tc01386g · Cited by 14
Lim, J. S., Woo, J., Bae, G., Yoo, S., Kim, J., Kim, J. H., Lee, J., Jin, Y., Jang, J., Hwang, Y. J., et al. (2024) · Chemical Science · doi:10.1039/d4sc03105a · Cited by 14
Yang, Z. H. U., MORIMOTO, Y., Shimizu, T., Morisato, K., Takeda, K., Kanamori, K., & Nakanishi, K. (2015) · Journal of the Ceramic Society of Japan · doi:10.2109/jcersj2.123.770 · Cited by 14
Shrestha, S., Morse, N., & Mustain, W. E. (2014) · RSC Advances · doi:10.1039/c4ra09119a · Cited by 16
Hill, M. R., Pas, S. J., Mudie, S., Kennedy, D. F., & Hill, A. J. (2009) · Journal of Materials Chemistry · doi:10.1039/b817457a · Cited by 14
3D net-linked mesoporous silica monolith: New environmental adsorbent and catalyst
Zhou, Y. T., Gu, F., Gao, L., Yang, J. Y., Lin, W. G., Yang, J. L., Wang, Y., & Zhu, J. H. (2010) · Catalysis Today · doi:10.1016/j.cattod.2010.04.052 · Cited by 14
Wang, X. (2010) · Journal of Porous Materials · doi:10.1007/s10934-010-9418-9 · Cited by 14
Wach, A., Drozdek, M., Dudek, B., Biazik, M., Łątka, P., Michalík, M., & Kuśtrowski, P. (2015) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b05868 · Cited by 14
Matos, J., Llano, B., Montaña, R., Poon, P. S., & Hidalgo, M. C. (2018) · Environmental Science and Pollution Research · doi:10.1007/s11356-018-2102-3 · Cited by 14
Morales–Leal, F. J., la Rosa, J. R. D., Ortiz, C. J. L., Río, D. A. D. H. D., Garza-Navarro, M. A., Tian, W., & Herrera, J. E. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.131623 · Cited by 14
Richard, J., Phimphachanh, A., Schneider, J., Nandi, S., Laurent, E., Lacroix‐Desmazes, P., Trens, P., Devautour‐Vinot, S., Marcotte, N., & Gérardin, C. (2022) · Chemistry of Materials · doi:10.1021/acs.chemmater.2c01352 · Cited by 14
Modifying the Stöber Process: Is the Organic Solvent Indispensable?
Wang, J., Zhang, K., Kavak, S., Bals, S., & Meynen, V. (2022) · Chemistry - A European Journal · doi:10.1002/chem.202202670 · Cited by 14
Pham, G. T. T., Vu, H. T., Pham, T. T., Thạnh, N. N., Thuy, V. N., Tran, H. Q., Doan, H. V., & Nguyen, M. B. (2023) · RSC Advances · doi:10.1039/d3ra01856c · Cited by 14
Lei, C., Xu, C., Noonan, O., Meka, A. K., Zhang, L., Nouwens, A. S., & Yu, C. (2015) · Chemical Communications · doi:10.1039/c5cc04458h · Cited by 14
Synthesis, characterization and evaluation of mesoporous silicates for adsorption of metal ions
Northcott, K. A., Oshima, S., Perera, J. M., Komatsu, Y., & Stevens, G. W. (2007) · Advanced Powder Technology · doi:10.1163/156855207782515012 · Cited by 14
The effect of recrystallization time on pore size and surface area of mesoporous SBA-15
Vunain, E., Malgas-Enus, R., Jalama, K., & Meijboom, R. (2013) · Journal of Sol-Gel Science and Technology · doi:10.1007/s10971-013-3163-x · Cited by 14
“0 was observed due to increase in pore diameter [19, 20].”
BackgroundLu, A., Tüysüz, H., & Schüth, F. (2007) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2007.07.017 · Cited by 14
Li, Z., Liu, Y., Yang, X., Xing, Y., Tsai, C., Wang, Z., Yang, Q., & Yang, R. T. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5b03788 · Cited by 14
Matmin, J., Affendi, I., & Endud, S. (2018) · Nanomaterials · doi:10.3390/nano8070514 · Cited by 14
“, for MCM-41, SBA-15, FSM-16, and HMS syntheses) [10] or clusters (e.”
BackgroundSBA-15 as a Support for Effective Olefin Metathesis Catalysts
Balcar, H., & Čejka, J. (2019) · Catalysts · doi:10.3390/catal9090743 · Cited by 14
“The external surface area is usually 10% or less of the total surface [15,20].”
BackgroundYan, Y., Li, M., King, S. C., Galy, T., Marszewski, M., Kang, J. S., Pilon, L., Hu, Y., & Tolbert, S. H. (2020) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.0c00464 · Cited by 18
Zebardasti, A., Dekamin, M. G., & Doustkhah, E. (2021) · Catalysts · doi:10.3390/catal11050621 · Cited by 14
Tsai, C.-T., Lu, H.-Y., Ting, C.-Y., Wu, W.-F., & Wan, B. (2008) · Thin Solid Films · doi:10.1016/j.tsf.2008.10.012 · Cited by 14
Yoon, S. B., Kim, J. Y., Yu, J., Gierszal, K. P., & Jaroniec, M. (2005) · Industrial & Engineering Chemistry Research · doi:10.1021/ie048946v · Cited by 14
Self-citationShi, T., Wen, Y., Ma, C., Jia, S., Wang, Z., & Zou, S. (2009) · Adsorption Science & Technology · doi:10.1260/0263-6174.27.7.643 · Cited by 14
“As the ageing temperature is increased, the hydrophobic nature of polyethylene oxide (PEO) chains changes (Kruk et al. 2000), which in turn leads to a change in the volume of the micelles.”
BackgroundSu, H., Bai, S., Bing, L., Deng, H., Zhuang, Y., & Sun, J. (2022) · Catalysis Letters · doi:10.1007/s10562-022-03995-4 · Cited by 13
“The parameters recorded for SBA-15 and ZIF-8 was close to values reported previously [51, 52].”
ResultYoon, B. S., Kim, K., Cho, E. H., Park, H.-R., Roh, H., & Ko, C. H. (2022) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2022.11.132 · Cited by 13
Self-citationHan, C., Wang, H., Zhang, L., Li, R., Zhang, Y., Luo, Y., & Zheng, X. (2011) · Advanced Powder Technology · doi:10.1016/j.apt.2010.03.001 · Cited by 13
SYNTHESIS AND CHARACTERIZATION OF MESOPOROUS SILICA MCM-41 AND SBA-15 FROM POWER PLANT BOTTOM ASH
Rahman, N. B. A., Rasid, H. M., Hassan, H. M., & Jalil, M. N. (2016) · Malaysian Journal of Analytical Science · doi:10.17576/mjas-2016-2003-11 · Cited by 13
“The sharpness of adsorption branches indicate the narrow pore size distribution[17].”
BackgroundControlled RAFT polymerization of MMA in confined space of various pore sizes of SBA-15
Xu, X. M., Zeng, Y., Yu, C., & Zhang, F. (2019) · Journal of Porous Materials · doi:10.1007/s10934-019-00797-9 · Cited by 13
Beaton, L., Zhang, S., & Kruk, M. (2021) · ACS Nano · doi:10.1021/acsnano.0c07748 · Cited by 13
Self-citationTirabadi, F. H., Hajiaghababaei, L., M.A.Tehrani, R., Badiei, A., & Mollahosseini, A. (2022) · Chemical Papers · doi:10.1007/s11696-022-02358-y · Cited by 13
Synthesis of mesoporous silica using a mineral silica source
Tillman, L., Voskanyan, A. A., & Navrotsky, A. (2022) · Journal of the American Ceramic Society · doi:10.1111/jace.18867 · Cited by 15
Shi, L., Xu, Y., Zhang, N., Lin, S., Li, X., Guo, P., & Li, X. (2013) · Journal of Solid State Chemistry · doi:10.1016/j.jssc.2013.04.040 · Cited by 13
Zamani, S., Chiesa, M., Meynen, V., Xiao, Y., Prélot, B., Zając, J., Verpoort, F., Cool, P., & Doorslaer, S. V. (2010) · The Journal of Physical Chemistry C · doi:10.1021/jp103794x · Cited by 13
Template synthesis of CMK-3 nanostructured carbon material and study of its properties
Ponomarenko, I. V., Parfenov, V. A., Zaitsevа, Y. N., Zharkov, S. M., & Kirik, S. D. (2014) · Glass Physics and Chemistry · doi:10.1134/s1087659614010180 · Cited by 13
Dye‐Sensitised Solar Cells Based on Large‐Pore Mesoporous TiO2 with Controllable Pore Diameters
Pan, K., Zhou, W., Tian, G., Pan, Q., Tian, C., Xie, T., Dong, Y., Wang, D., & Fu, H. (2011) · European Journal of Inorganic Chemistry · doi:10.1002/ejic.201100395 · Cited by 13
Pore structure effects on the kinetics of methanol oxidation over nanocast mesoporous perovskites
Nair, M. M., Kleitz, F., & Kaliaguine, S. (2016) · CHINESE JOURNAL OF CATALYSIS (CHINESE VERSION) · doi:10.1016/s1872-2067(15)60909-3 · Cited by 13
Sharma, A., & Dubey, A. (2016) · Journal of Porous Materials · doi:10.1007/s10934-016-0277-x · Cited by 13
Virumbrales, M., Sáez-Puche, R., Blanco-Gutiérrez, V., & Torralvo-Fernández, M. J. (2017) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.6b11801 · Cited by 13
Pacheco-Sosa, J. G., Castillo-Escobedo, A. I., Chavarría-Hernández, J. C., Díaz-Félix, M. C., Pérez-Vidal, H., Ordoñez, L. C., García-Dávila, J., Morales-Ortuño, J. C., & Escobar, B. (2019) · Journal of Porous Materials · doi:10.1007/s10934-019-00749-3 · Cited by 13
Lee, C., Lee, J., Kang, K., Song, H.-M., Kim, I., Rhee, H., & Kim, B. (2007) · Biotechnology and Bioprocess Engineering · doi:10.1007/bf03028645 · Cited by 13
Metadata
- Authors
- Kruk, M., Jaroniec, M., Ko, C. H., & Ryoo, R.
- Affiliations
- Kent State University (US)
- Corresponding author
- Jaroniec, Mietek
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2000-06-20
- Volume
- 12
- Issue
- 7
- Pages
- 1961-1968
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2046430541
- Semantic Scholar
- 429da901cc5e824f6a481b7cd2c33f5a56537ed3
- Cited by
- 1,409
- References
- 66
- Citations by year
- 2026: 22 · 2025: 40 · 2024: 39 · 2023: 48 · 2022: 58 · 2021: 53 · 2020: 62 · 2019: 67 · 2018: 77 · 2017: 60 · 2016: 57 · 2015: 63 · 2014: 58 · 2013: 67 · 2012: 63
- FWCI
- 29.94
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Chemistry of Materials (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Materials Chemistry › Mesoporous Materials and Catalysis
- Physical Sciences › Chemistry › Inorganic Chemistry › Zeolite Catalysis and Synthesis
- Physical Sciences › Earth and Planetary Sciences › Geochemistry and Petrology › Clay minerals and soil interactions
- Keywords
- SBA-15, ordered mesoporous silica, synthesis temperature, washing effects, structural shrinkage, triblock copolymer template, pore accessibility, calcination
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.