Characterization of the Porous Structure of SBA-15
The DOI matches its Crossref record; 70 of the 70 references it cites were found in a registry or an index.
Abstract
SBA-15 ordered mesoporous silicas were synthesized using the method reported by Zhao et al. The structures of these materials were characterized using powder X-ray diffraction (XRD), thermogravimetric analysis (TGA), and nitrogen adsorption. The samples were found to exhibit structural properties similar to those reported earlier. Our study confirmed that the size of primary mesopores of SBA-15 can be tailored by the choice of synthesis temperature and that SBA-15 exhibits a significant amount of disordered micropores and small mesopores. The volume and size of these complementary pores were found to be dependent to some extent on the synthesis/aging temperature. It was shown that the washing of as-synthesized SBA-15 in water or ethanol was accompanied by an appreciable structural shrinkage and led to the removal of a significant part of the polymeric template. Therefore, washing needs to be avoided if one wants to isolate SBA-15 without appreciable loss of the template. It was confirmed that water-washed SBA-15 samples have fully accessible primary mesopores. Ethanol-washed samples also were found to exhibit accessible porosity. Despite an appreciable content of the template in the water- and ethanol-washed samples, their pore sizes were usually larger than those of the calcined materials. The observed structural properties of SBA-15 and their dependence on the synthesis temperature and washing were attributed to the changes in the degree of penetration of the poly(ethylene oxide) chains of the triblock copolymer template within the siliceous walls of SBA-15.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“For example, with the aid of trimethylbenzene (TMB), the pore size of silica can be expanded to 30 nm [158].”
From Block Copolymers: Synthesis, Self-Assembly, and Applications (2017) · cites this paper as [158]
Citations
Cites
Sing, K. S. W. (1985) · Pure and Applied Chemistry · doi:10.1351/pac198557040603 · Cited by 24,485
Triblock Copolymer Syntheses of Mesoporous Silica with Periodic 50 to 300 Angstrom Pores
Zhao, D., Feng, J., Huo, Q., Melosh, N., Fredrickson, G. H., Chmelka, B. F., & Stucky, G. D. (1998) · Science · doi:10.1126/science.279.5350.548 · Cited by 11,753
Zhao, D., Huo, Q., Feng, J., Chmelka, B. F., & Stucky, G. D. (1998) · Journal of the American Chemical Society · doi:10.1021/ja974025i · Cited by 6,697
Younan Xia, A., & Whitesides, G. M. (1998) · Angewandte Chemie International Edition · doi:10.1002/(sici)1521-3773(19980316)37:5<667::aid-anie667>3.0.co;2-h · Cited by 4,672
Generalized syntheses of large-pore mesoporous metal oxides with semicrystalline frameworks
Yang, P., Zhao, D., Margolese, D. I., Chmelka, B. F., & Stucky, G. D. (1998) · Nature · doi:10.1038/24132 · Cited by 2,493
Evaporation-Induced Self-Assembly: Nanostructures Made Easy
Brinker, C. J., Lu, Y., Sellinger, A., & Fan, H. (1999) · Advanced Materials · doi:10.1002/(sici)1521-4095(199905)11:7<555::aid-adma555>3.0.co;2-e · Cited by 2,112
Evaporation-Induced Self-Assembly: Nanostructures Made Easy
Brinker, C. J., Lu, Y., Sellinger, A., & Fan, H. (1999) · Advanced Materials · doi:10.1002/(sici)1521-4095(199905)11:7<579::aid-adma579>3.0.co;2-r · Cited by 2,079
Alexandridis, P., & Alan Hatton, T. (1995) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/0927-7757(94)03028-x · Cited by 1,920
Surfactant Control of Phases in the Synthesis of Mesoporous Silica-Based Materials
Huo, Q., Margolese, D. I., & Stucky, G. D. (1996) · Chemistry of Materials · doi:10.1021/cm960137h · Cited by 1,567
Wanka, G., Hoffmann, H., & Ulbricht, W. (1994) · Macromolecules · doi:10.1021/ma00093a016 · Cited by 1,496
Research works printed but not linked: 3
- Bagshaw S. A., 1995, J. Science, 269, 1242
- Bae S. J., 1999, Chem. Commun., 31
- Ryoo R., J. Phys. Chem. B, submitted for publication.
Cited by
Items 301–400 of 1,000
A simple and fast sonication procedure to remove surfactant templates from mesoporous MCM-41
Jabariyan, S., & Zanjanchi, M. A. (2012) · Ultrasonics Sonochemistry · doi:10.1016/j.ultsonch.2012.01.012 · Cited by 64
Tsai, C.-T., Pan, Y.-C., Ting, C.-C., Vetrivel, S., Chiang, A. S. T., Fey, G. T., & Kao, H. (2009) · Chemical Communications · doi:10.1039/b909680a · Cited by 64
Liu, Y., Li, Z., Yang, X., Xing, Y., Tsai, C., Yang, Q., Wang, Z., & Yang, R. T. (2016) · RSC Advances · doi:10.1039/c5ra27289k · Cited by 64
Dunphy, D. R., Sheth, P., Garcia, F. L., & Brinker, C. J. (2014) · Chemistry of Materials · doi:10.1021/cm5031624 · Cited by 64
Mesoporous silica supported cobalt oxide catalysts for catalytic removal of benzene
Li, J., Xu, X., Hao, Z., & Zhao, W. (2007) · Journal of Porous Materials · doi:10.1007/s10934-007-9119-1 · Cited by 63
Synthesis and characterization of large-pore FDU-12 silica
Kruk, M., & Hui, C. M. (2007) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2007.12.015 · Cited by 64
Self-citationJohansson, E. M. V., Córdoba, J. M., & Odén, M. (2010) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2010.04.016 · Cited by 63
Guillet‐Nicolas, R., Ahmad, R., Cychosz, K. A., Kleitz, F., & Thommes, M. (2016) · New Journal of Chemistry · doi:10.1039/c5nj03466c · Cited by 63
CuO/SBA-15 catalyst for the catalytic ozonation of mesoxalic and oxalic acids. Water matrix effects
Petre, A. L., Carbajo, J. B., Rosal, R., García‐Calvo, E., & Perdigón-Melón, J. A. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.03.071 · Cited by 62
“The main features of SBA-15 materials with respect to other ordered mesoporous silicas include its larger and tailored mesoporous pore diameter (control of pore size by synthesis temperature from 3 to 20 nm [30]) and thicker walls (approx.”
BackgroundSimple synthesis recipes of porous materials
Martens, J. A., Jammaer, J. A. G., Bajpe, S. R., Aerts, A., Lorgouilloux, Y., & Kirschhock, C. E. A. (2010) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2010.09.018 · Cited by 62
Parlett, C. M. A., Bruce, D. W., Hondow, N., Newton, M. A., Lee, A. F., & Wilson, K. (2012) · ChemCatChem · doi:10.1002/cctc.201200301 · Cited by 62
Adsorption of copper (II) on mesoporous silica: the effect of nano-scale confinement
Knight, A. W., Tigges, A., & Ilgen, A. (2018) · Geochemical Transactions · doi:10.1186/s12932-018-0057-4 · Cited by 65
“The mesopores exist in the main channels as templated from the removal of the calcined surfactant, whereas the micropores co-exist due to intrawall pores that develop as a consequence of the removal of the surfactant template creating structural irregularities [43].”
BackgroundLi, S., Wang, Y., Gao, L., Wu, Y., Yang, X., Sheng, P., & Xiao, G. (2017) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2017.11.027 · Cited by 61
Characterization of the Porosity in SBA-15 Silicas by Hyperpolarized 129Xe NMR
Nossov, A., Haddad, E., Guenneau, F., Galarneau, A., Renzo, F. D., Fajula, F., & Gédeon, A. (2003) · The Journal of Physical Chemistry B · doi:10.1021/jp036195p · Cited by 61
Transition Metal Single Atoms Constructed by Using Inherent Confined Space
Gu, M., Gao, L.-P., Peng, S., Qi, S., Shao, X., Liu, X., & Sun, L. (2023) · ACS Nano · doi:10.1021/acsnano.2c12817 · Cited by 60
El‐Safty, S. A., Kiyozumi, Y., Hanaoka, T., & Mizukami, F. (2008) · The Journal of Physical Chemistry C · doi:10.1021/jp0760096 · Cited by 61
Kruk, M., Dufour, B., Celer, E. B., Kowalewski, T., Jaroniec, M., & Matyjaszewski, K. A. (2006) · Chemistry of Materials · doi:10.1021/cm0516154 · Cited by 68
Self-citationKlimova, T., Esquivel, A., Reyes, J., Rubio, M. F., Bokhimi, X., & Aracil, J. (2006) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2006.03.016 · Cited by 64
Ullah, R., Atilhan, M., Aparício, S., Canlier, A., & Yavuz, C. T. (2015) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2015.09.013 · Cited by 60
Li, J., Tang, Y., Li, Z., Ding, X., Yu, B., & Lin, L. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b22298 · Cited by 60
Investigation of coking behaviors of model compounds in bio-oil during steam reforming
Li, X., Zhang, Z., Zhang, L., Fan, H., Li, X., Liu, Q., Wang, S., & Hu, X. (2020) · Fuel · doi:10.1016/j.fuel.2019.116961 · Cited by 63
Li, G., Yu, H., Song, W., Wang, X., Li, Y., Shao, Z., & Yi, B. (2012) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2012.08.087 · Cited by 59
“[27] Kruk M, Jaroniec M, Ko CH, Ryoo R.”
BackgroundMascotto, S., Wallacher, D., Brandt, A., Hauß, T., Thommes, M., Zickler, G. A., Funari, S. S., Timmann, A., & Smarsly, B. M. (2009) · Langmuir · doi:10.1021/la9013619 · Cited by 59
Kanamori, K. (2011) · Journal of the Ceramic Society of Japan · doi:10.2109/jcersj2.119.16 · Cited by 60
Russo, P. A., Carrott, M. M. L. R., & Carrott, P. J. M. (2010) · New Journal of Chemistry · doi:10.1039/c0nj00614a · Cited by 59
Parlett, C. M. A., Aydın, A., Durndell, L. J., Frattini, L., Isaacs, M. A., Lee, A. F., Liu, X., Olivi, L., Trofimovaite, R., Wilson, K., et al. (2016) · Catalysis Communications · doi:10.1016/j.catcom.2016.12.021 · Cited by 59
Barczak, M., Bytniewska, M., & Borowski, P. (2018) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2018.01.013 · Cited by 61
SBA-15 Anchored Metal Containing Catalysts in the Oxidative Desulfurization Process
Crucianelli, M., Bizzarri, B. M., & Saladino, R. (2019) · Catalysts · doi:10.3390/catal9120984 · Cited by 58
“7%, and the pore size and pore volume increased by increasing the aging temperatures [89,90].”
BackgroundHuang, S., Tan, L., Zhang, L., Wu, J., Zhang, L., Tang, Y., Wang, H., & Liang, Y. (2020) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2020.128751 · Cited by 59
Calzaferri, G., Gallagher, S. H., Lustenberger, S., Walther, F., & Brühwiler, D. (2022) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2022.127121 · Cited by 58
Dendrimer–silica hybrid mesoporous materials
Kadib, A. E., Katir, N., Bousmina, M., & Majoral, J. (2011) · New Journal of Chemistry · doi:10.1039/c1nj20443b · Cited by 58
Tao, J., Xiong, J., Jiao, C., Zhang, D., Lin, H., & Chen, Y. (2015) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b00652 · Cited by 58
Nanocasting of Ordered Mesoporous Co3O4-Based Polyoxometalate Composite Frameworks
Armatas, G. S., Katsoulidis, A. P., Petrakis, D. E., Pomonis, P. J., & Kanatzidis, M. G. (2010) · Chemistry of Materials · doi:10.1021/cm101972h · Cited by 58
Saroj, S., & Rajput, S. (2018) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2018.01.014 · Cited by 58
Plugged Hexagonal Templated Silica (PHTS): An In-Depth Study of the Structural Characteristics
Bavel, E. V., Cool, P., Aerts, K., & Vansant, E. F. (2004) · The Journal of Physical Chemistry B · doi:10.1021/jp049815a · Cited by 58
Facile Self‐Assembly Processes to Phenylene‐Bridged Silica Monoliths with Four Levels of Hierarchy
Brandhuber, D., Peterlik, H., & Hüsing, N. (2006) · Small · doi:10.1002/smll.200500300 · Cited by 58
On the mechanical stability of mesoporous silica SBA-15
Chytil, S., Haugland, L., & Blekkan, E. A. (2007) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2007.07.020 · Cited by 57
Wang, P., Wang, Z., Li, J., & Bai, Y. (2008) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2008.04.029 · Cited by 57
Mesoporous silica supported Rh catalysts for high concentration N2O decomposition
Piumetti, M., Hussain, M., Fino, D., & Russo, N. (2014) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2014.10.008 · Cited by 57
dos Santos, S. M. L., Cecilia, J. A., Vilarrasa‐García, E., da Silva, I. J., Rodrı́guez-Castellón, E., & Azevedo, D. C. S. (2016) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2016.06.004 · Cited by 57
Yin, Y., Yang, Z., Wen, Z.-H., Yuan, A., Liu, X., Zhang, Z.-Z., & Zhou, H. (2017) · Scientific Reports · doi:10.1038/s41598-017-04346-9 · Cited by 58
Synthesis of diesel additives from fructose over PWA/SBA-15 catalyst
Patil, C. R., & Rode, C. V. (2018) · Fuel · doi:10.1016/j.fuel.2017.12.027 · Cited by 57
Wang, L., Fan, J. Q., Tian, B., Yang, H., Yu, C., Tu, B., & Zhao, D. (2003) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2003.10.015 · Cited by 57
Brodie–Linder, N., Dosseh, G., Alba–Simionesco, C., Audonnet, F., & Impéror‐Clerc, M. (2007) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2007.09.007 · Cited by 57
Is There Any Microporosity in Ordered Mesoporous Silicas?
Silvestre‐Albero, A., Jardim, E. D. O., Bruijn, E. A., Meynen, V., Cool, P., Sepúlveda‐Escribano, A., Silvestre‐Albero, J., & Rodríguez-Reinoso, F. (2008) · Langmuir · doi:10.1021/la802692z · Cited by 56
Xiang, X., Ding, S., Suo, H., Xu, C., Gao, Z., & Hu, Y. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.11.031 · Cited by 56
Selvakannan, P., Mantri, K., Tardio, J., & Bhargava, S. K. (2012) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2012.12.008 · Cited by 55
Photocatalytic activity of titania-containing mesoporous SBA-15 silica
Wang, W., & Song, M. (2006) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2006.07.001 · Cited by 55
Klimova, T., Gutiérrez, O. Y., Lizama, L., & Amezcua, J. C. (2010) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2010.04.019 · Cited by 55
Geszke-Moritz, M., & Moritz, M. (2016) · Applied Surface Science · doi:10.1016/j.apsusc.2016.02.004 · Cited by 56
Shan, W., Zhang, D., Wang, X., Wang, D., Xing, Z., Xiong, Y., Fan, Y., & Yang, Y. (2018) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2018.10.030 · Cited by 55
Lima, T. M., de Macedo, V., Silva, D. S. A., Castelblanco, W. N., Pereira, C. A., Roncolatto, R. E., Gawande, M. B., Zbořil, R., Varma, R. S., & Urquieta-Gonzalez, E. A. (2020) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2020.119248 · Cited by 55
Qiao, S., Yu, C., Hu, Q., Jin, Y., Zhou, X., Zhao, X., & Lu, G. Q. (2006) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2005.11.017 · Cited by 55
Hankari, S. E., Kadib, A. E., Finiels, A., Bouhaouss, A., Moreau, J. J. E., Crudden, C. M., Brunel, D., & Hesemann, P. (2011) · Chemistry - A European Journal · doi:10.1002/chem.201002190 · Cited by 54
Wei, J., Shi, J., Pan, H., Su, Q., Zhu, J., & Shi, Y. (2008) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2008.08.003 · Cited by 54
Size and Spatial Distribution of Micropores in SBA-15 using CM-SANS
Pollock, R. A., Walsh, B. R., Fry, J. R., Ghampson, I. T., Melnichenko, Y. B., Kaiser, H., Pynn, R., DeSisto, W. J., Wheeler, M. C., & Frederick, B. G. (2011) · Chemistry of Materials · doi:10.1021/cm200707y · Cited by 54
Ecodesign of Ordered Mesoporous Materials Obtained with Switchable Micellar Assemblies
Baccile, N., Reboul, J., Blanc, B., Coq, B., Lacroix‐Desmazes, P., In, M., & Gérardin, C. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200802431 · Cited by 62
New two-component water sorbent CaCl2-FeKIL2 for solar thermal energy storage
Ristić, A., Maučec, D., Henninger, S. K., & Kaučič, V. (2012) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2012.06.054 · Cited by 54
Experimental Study on the Criticality of a Methane/Ethane Mixture Confined in Nanoporous Media
Qiu, X., Tan, S. P., Dejam, M., & Adidharma, H. (2019) · Langmuir · doi:10.1021/acs.langmuir.9b01399 · Cited by 54
Zhang, F., Ma, K., Li, Y., Ran, Q., Yao, C.-Y., Yang, C.-T., Yu, H., Hu, S., & Peng, S. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.123717 · Cited by 54
Mild Methods for Removing Organic Templates from Inorganic Host Materials
Patarin, J. (2004) · Angewandte Chemie International Edition · doi:10.1002/anie.200301740 · Cited by 54
Hydrogen sorption in transition metal modified mesoporous materials
Prasanth, K. P., Raj, M. C., Bajaj, H. C., Kim, T.-W., & Jasra, R. V. (2010) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2009.12.134 · Cited by 54
“The lower residual peak intensity in the powder diffraction diagram could be due to the uptake of molecules inside the pores, which reduces the scattering contrast between the pore wall and pore [13].”
BackgroundSasidharan, M., Kiyozumi, Y., Mal, N. K., Paul, M., Rajamohanan, P. R., & Bhaumik, A. (2009) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2009.05.038 · Cited by 53
He, C. Q., Zhang, F., Yue, L., Shang, X., Chen, J., & Hao, Z. (2011) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2011.09.017 · Cited by 53
Role of Liquid vs Vapor Water in the Hydrothermal Degradation of SBA-15
Pollock, R. A., Gor, G. Y., Walsh, B. R., Fry, J. R., Ghampson, I. T., Melnichenko, Y. B., Kaiser, H., DeSisto, W. J., Wheeler, M. C., & Frederick, B. G. (2012) · The Journal of Physical Chemistry C · doi:10.1021/jp303150e · Cited by 53
Ordered mesoporous MnO2 as a synergetic adsorbent for effective arsenic(iii) removal
Zhi, B., Ding, H. Y., Wang, D., Cao, Y., Ye, Z., Wang, X., Liu, Y., & Huo, Q. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta13790b · Cited by 55
Enhanced electrorheological activity of polyaniline coated mesoporous silica with high aspect ratio
Noh, J., Yoon, C., & Jang, J. (2016) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2016.02.061 · Cited by 53
Effect of Pore Shape on Freezing and Melting Temperatures of Water
Morishige, K., Yasunaga, H., & Matsutani, Y. (2010) · The Journal of Physical Chemistry C · doi:10.1021/jp910759n · Cited by 53
A general protocol for precise syntheses of ordered mesoporous intermetallic nanoparticles
Lv, H., Wang, Y., Sun, L., Yamauchi, Y., & Liu, B. (2023) · Nature Protocols · doi:10.1038/s41596-023-00872-1 · Cited by 57
Xing, R., Lin, H., Jiang, P., & Qu, F. (2012) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2012.03.017 · Cited by 52
Surface roughness effects in the catalytic behavior of vanadia supported on SBA-15
Smith, M. A., Zoelle, A., Yang, Y., Rioux, R. M., Hamilton, N. G., Amakawa, K., Nielsen, P. K., & Trunschke, A. (2014) · Journal of Catalysis · doi:10.1016/j.jcat.2014.01.011 · Cited by 52
Guo, R., Guo, J. Y., Yu, F., & Gang, D. D. (2013) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2013.03.028 · Cited by 56
Pore Size Determination in Ordered Mesoporous Materials Using Powder X-ray Diffraction
Ishii, Y., Nishiwaki, Y., Al-zubaidi, A., & Kawasaki, S. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp4057362 · Cited by 52
Facile approach for the synthesis of spherical mesoporous silica nanoparticles from sodium silicate
Hwang, J., Lee, J. H., & Chun, J. (2020) · Materials Letters · doi:10.1016/j.matlet.2020.128765 · Cited by 52
Short-period synthesis of ordered mesoporous silica SBA-15 using ultrasonic technique
Chareonpanich, M., Nanta-ngern, A., & Limtrakul, J. P. (2007) · Materials Letters · doi:10.1016/j.matlet.2007.04.019 · Cited by 52
High surface area mesoporous Co3O4 from a direct soft template route
Dahal, N., Ibarra, I. A., & Humphrey, S. M. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm30460k · Cited by 52
Effect of two-step sol–gel reaction on the mesoporous silica structure
Choi, D., & Yang, S. (2003) · Journal of Colloid and Interface Science · doi:10.1016/s0021-9797(03)00020-1 · Cited by 52
Li, X., Chen, Y., Liu, S., Zhao, N., Jiang, X., Su, M., & Li, Z. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.129180 · Cited by 51
Shenashen, M. A., El‐Safty, S. A., Elshehy, E. A., & Khairy, M. (2014) · European Journal of Inorganic Chemistry · doi:10.1002/ejic.201402756 · Cited by 51
Zhou, X., Duan, A., Zhao, Z., Gong, Y., Wu, H., Li, J., Wei, Y., Jiang, G., Liu, J., & Zhang, Y. (2014) · Journal of Materials Chemistry A · doi:10.1039/c3ta14859a · Cited by 51
“Low Cost” Pore Expanded SBA-15 Functionalized with Amine Groups Applied to CO2 Adsorption
Vilarrasa‐García, E., Cecilia, J. A., Ortigosa-Moya, E. M., Cavalcante, C. L., Azevedo, D. C. S., & Rodríguez-Castellón, E. (2015) · Materials · doi:10.3390/ma8052495 · Cited by 52
TiO2-loaded Cr-modified molecular sieves for 4-chlorophenol photodegradation under visible light
SUN, B., Reddy, E. P., & Smirniotis, P. G. (2005) · Journal of Catalysis · doi:10.1016/j.jcat.2005.10.028 · Cited by 51
Zhang, H., Gu, F., Liu, Q., Gao, J., Jia, L., Zhu, T., Chen, Y., Zhong, Z., & Su, F. (2014) · RSC Advances · doi:10.1039/c3ra47749e · Cited by 50
Tsoncheva, T., Rosenholm, J. M., Lindén, M., Kleitz, F., Tiemann, M., Ivanova, L., Dimitrov, M., Paneva, D. G., Mitov, I., & Minchev, C. (2007) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2007.10.005 · Cited by 50
Jackson, M. A., Mbaraka, I. K., & Shanks, B. H. (2006) · Applied Catalysis A General · doi:10.1016/j.apcata.2006.05.019 · Cited by 50
A Concise Review on Porous Adsorbents for Benzene and Other Volatile Organic Compounds
Choma, J., Szczęśniak, B., Kapusta, A., & Jaroniec, M. (2024) · Molecules · doi:10.3390/molecules29235677 · Cited by 64
“Research on these materials is focused on their adsorption capacity, hydrophobic/hydrophilic properties, stability, and regeneration ability.”
Self-citationSimultaneous removal of copolymer template from SBA-15 in the crystallization process
Yang, L., Wang, Y. J., Luo, G. S., & Dai, Y. (2005) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2005.01.023 · Cited by 49
Wang, Y., Zhao, D., Wang, L., Wang, X., Li, L., Xing, Z., Ji, N., Liu, S., & Ding, H. (2017) · Fuel · doi:10.1016/j.fuel.2017.11.153 · Cited by 49
Anomalous H2 Desorption Rate of NaAlH4 Confined in Nitrogen-Doped Nanoporous Carbon Frameworks
Carr, C. L., Jayawardana, W., Zou, H., White, J. L., Gabaly, F. E., Conradi, M. S., Stavila, V., Allendorf, M. D., & Majzoub, E. H. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b00305 · Cited by 49
Gao, Y., Chen, G., Wang, X., Yang, H., Wang, Z., Lin, W., Xu, H., Bai, Y., & Wu, C. K. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c04878 · Cited by 49
Stability of Cubic Ice in Mesopores
Morishige, K., Yasunaga, H., & Uematsu, H. (2009) · The Journal of Physical Chemistry C · doi:10.1021/jp8088935 · Cited by 49
Cattaneo, A. S., Ferrara, C., Villa, D. C., Angioni, S., Milanese, C., Capsoni, D., Grandi, S., Mustarelli, P., Allodi, V., Mariotto, G., et al. (2015) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2015.08.011 · Cited by 48
Betiha, M. A., Hassan, H. M. A., Al-Sabagh, A. M., Khder, A. S., & Ahmed, E. A. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm32941g · Cited by 48
Tang, Y., Miao, S., Shanks, B. H., & Zheng, X. (2010) · Applied Catalysis A General · doi:10.1016/j.apcata.2010.01.015 · Cited by 54
Platinum Thin Film Consisting of Well-Aligned Nanowires and Its Optical Behavior
Suzuki, T., Miyata, H., Noma, T., & Kuroda, K. (2008) · The Journal of Physical Chemistry C · doi:10.1021/jp077276e · Cited by 48
Photocatalytic degradation of iron–cyanocomplexes by TiO2 based catalysts
van Grieken, R., Aguado, J., López-Muñoz, M. J., & Marugán, J. (2004) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2004.08.008 · Cited by 48
MnOx Nanoparticles Supported on a New Mesostructured Silicate with Textural Porosity
Tušar, N. N., Ristić, A., Mali, G., Mazaj, M., Arčon, I., Arčon, D., Kaučič, V., & Logar, N. Z. (2010) · Chemistry - A European Journal · doi:10.1002/chem.200902851 · Cited by 47
A DFT study of the structural units in SBA-15 mesoporous molecular sieve
Wang, Z., Wang, D., Zhao, Z., Chen, Y., & Lan, J. (2010) · Computational and Theoretical Chemistry · doi:10.1016/j.comptc.2010.11.004 · Cited by 47
Gommes, C. (2012) · Langmuir · doi:10.1021/la2051228 · Cited by 47
Hydrodeoxygenation of Dibenzofuran Over SBA-15 Supported Pt, Pd, and Ru Catalysts
Wang, L., Li, C., Jin, S., Li, W., & Liang, C. (2014) · Catalysis Letters · doi:10.1007/s10562-014-1236-2 · Cited by 47
Metadata
- Authors
- Kruk, M., Jaroniec, M., Ko, C. H., & Ryoo, R.
- Affiliations
- Kent State University (US)
- Corresponding author
- Jaroniec, Mietek
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2000-06-20
- Volume
- 12
- Issue
- 7
- Pages
- 1961-1968
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2046430541
- Semantic Scholar
- 429da901cc5e824f6a481b7cd2c33f5a56537ed3
- Cited by
- 1,409
- References
- 66
- Citations by year
- 2026: 22 · 2025: 40 · 2024: 39 · 2023: 48 · 2022: 58 · 2021: 53 · 2020: 62 · 2019: 67 · 2018: 77 · 2017: 60 · 2016: 57 · 2015: 63 · 2014: 58 · 2013: 67 · 2012: 63
- FWCI
- 29.94
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Chemistry of Materials (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Materials Chemistry › Mesoporous Materials and Catalysis
- Physical Sciences › Chemistry › Inorganic Chemistry › Zeolite Catalysis and Synthesis
- Physical Sciences › Earth and Planetary Sciences › Geochemistry and Petrology › Clay minerals and soil interactions
- Keywords
- SBA-15, ordered mesoporous silica, synthesis temperature, washing effects, structural shrinkage, triblock copolymer template, pore accessibility, calcination
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.