CoChat

Adding Value to Power Station Captured CO2: Tolerant Zn and Mg Homogeneous Catalysts for Polycarbonate Polyol Production

Open access
Chapman, A. M., Keyworth, C., Kember, M. R., Lennox, A. J. J., Williams, C. K. · 2015 · ACS Catalysis
Cited by 153

The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.

Abstract

Abstract Using captured waste carbon dioxide (CCU) as a chemical reagent is an attractive means to add value to carbon capture and storage (CCS) and is a high-priority target for manufacturing. One promising route is to copolymerize carbon dioxide and epoxides, to prepare aliphatic polycarbonates. In this study, three homogeneous dinuclear Zn and Mg catalysts, previously reported by our group (seeKember, M. R.; Knight, P. D.; Reung, P. T. R.; Williams, C. KAngew. Chem., Int. Ed.2009, 48, 931–933. and Kember, M. R.; Williams, C. K.J. Am. Chem. Soc.2012, 134, 15676–15679.) have been investigated using captured and contaminated carbon dioxide, with cyclohexene oxide, to produce polymers. Carbon dioxide captured from the carbon capture demonstrator plant at Ferrybridge Power Station, U.K., is applied for the efficient production of poly(cyclohexylene carbonate). Remarkably, the dinuclear Zn and Mg catalysts display nearly equivalent turnover numbers (TON) and turnover frequencies (TOF) using captured CO2 versus those using purified CO2. The tolerance of the catalysts to reactions contaminated with known quantities of exogenous water, nitrogen, SO2, amine, and octadecanethiol are reported. The catalyst activities, productivities, and selectivities are presented, together with the polymers’ number-average molecular weights (Mn), dispersities (Đ), and end-group analyses. The catalysts show high tolerance to protic impurities, including the addition of amine, thiol, and water. In particular, under certain conditions, efficient polymerization can be conducted in the presence of up to 400 equiv of water without compromising catalytic activity/productivity or selectivity. Furthermore, the catalysts can selectively produce polycarbonate polyols with molecular weights in the range of 600−9000 g/mol and disperities <1.10.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1021/cs501798s

Cites

8 of 8 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 8 references

Cited by

Metadata

Authors
Chapman, A. M., Keyworth, C., Kember, M. R., Lennox, A. J. J., & Williams, C. K.
Venue
ACS Catalysis
Published
2015-02-10
Volume
5
Issue
3
Pages
1581-1588
ISSN
2155-5435 (ISSN-L)
OpenAlex
W2023913803
Cited by
153
References
8
FWCI
5.70
Type
journal article
Language
en
Open access
hybrid

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.