The DOI matches its Crossref record.
Processing Real-World Waste Plastics by Pyrolysis-Reforming for Hydrogen and High-Value Carbon Nanotubes
Abstract
Producing both hydrogen and high-value carbon nanotubes (CNTs) derived from waste plastics is reported here using a pyrolysis-reforming technology comprising a two-stage reaction system, in the presence of steam and a Ni-Mn-Al catalyst. The waste plastics consisted of plastics from a motor oil container (MOC), commercial waste high density polyethylene (HDPE) and regranulated HDPE waste containing polyvinyl chloride (PVC). The results show that hydrogen can be produced from the pyrolysis-reforming process, but also carbon nanotubes are formed on the catalyst. However, the content of 0.3 wt.% polyvinyl chloride in the waste HDPE (HDPE/PVC) has been shown to poison the catalyst and significantly reduce the quantity and purity of CNTs. The presence of sulfur has shown less influence on the production of CNTs in terms of quantity and CNT morphologies. Around 94.4 mmol H2 g(-1) plastic was obtained for the pyrolysis-reforming of HDPE waste in the presence of the Ni-Mn-Al catalyst and steam at a reforming temperature of 800 °C. The addition of steam in the process results in an increase of hydrogen production and reduction of carbon yield; in addition, the defects of CNTs, for example, edge dislocations were found to be increased with the introduction of steam (from Raman analysis).
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Thermal degradation of PVC: A review
Yu, J., Sun, L., Ma, C., Qiao, Y., & Yao, H. (2016) · Waste Management · doi:10.1016/j.wasman.2015.11.041 · Cited by 1,049
Catalytic processing of plastic waste on the rise
Martín, A. J., Mondelli, C., Jaydev, S. D., & Pérez-Ramírez, J. (2021) · Chem · doi:10.1016/j.chempr.2020.12.006 · Cited by 613
Microwave-initiated catalytic deconstruction of plastic waste into hydrogen and high-value carbons
Jie, X., Li, W., Slocombe, D., Gao, Y., Banerjee, I., Gonzalez-Cortes, S., Yao, B., AlMegren, H., Alshihri, S., Dilworth, J., et al. (2020) · Nature Catalysis · doi:10.1038/s41929-020-00518-5 · Cited by 611
Ochoa, A., Bilbao, J., Gayubo, A. G., & Castaño, P. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.109600 · Cited by 547
Catalytic upcycling of high-density polyethylene via a processive mechanism
Tennakoon, A., Wu, X., Paterson, A. L., Patnaik, S., Pei, Y., LaPointe, A. M., Ammal, S. C., Hackler, R. A., Heyden, A., Slowing, I. I., et al. (2020) · Nature Catalysis · doi:10.1038/s41929-020-00519-4 · Cited by 524
Pyrolysis technology for plastic waste recycling: A state-of-the-art review
Dai, L., Zhou, N., Lv, Y., Cheng, Y., Wang, Y., Liu, Y., Cobb, K., Chen, P., Lei, H., & Ruan, R. (2022) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2022.101021 · Cited by 485
Yao, D., Zhang, Y., Williams, P. T., Yang, H., & Chen, H. (2018) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2017.09.035 · Cited by 347
Self-citationYao, D., Wu, C., Yang, H., Zhang, Y., Nahil, M. A., Chen, Y., Williams, P. T., & Chen, H. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.06.012 · Cited by 315
Self-citationRecent progress in controlled carbonization of (waste) polymers
Gong, J., Chen, X., & Tang, T. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.04.001 · Cited by 309
Huang, J., Veksha, A., Chan, W. P., Giannis, A., & Lisak, G. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111866 · Cited by 301
Self-citationMa, C., Yu, J., Wang, B., Song, Z., Xiang, J., Hu, S., Su, S., & Sun, L. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.04.020 · Cited by 287
Zhang, X., Lei, H., Yadavalli, G., Zhu, L., Wei, Y., & Liu, Y. (2015) · Fuel · doi:10.1016/j.fuel.2014.12.013 · Cited by 285
Singh, R. K., & Ruj, B. (2016) · Fuel · doi:10.1016/j.fuel.2016.01.049 · Cited by 279
Current approaches to waste polymer utilization and minimization: a review
Okan, M., Aydin, H. M., & Barsbay, M. (2019) · Journal of Chemical Technology & Biotechnology · doi:10.1002/jctb.5778 · Cited by 263
Hydrogen and Carbon Nanotubes from Pyrolysis-Catalysis of Waste Plastics: A Review
Williams, P. T. (2021) · Waste and Biomass Valorization · doi:10.1007/s12649-020-01054-w · Cited by 261
Self-citationYao, D., Yang, H., Hu, Q., Chen, Y., Chen, H., & Williams, P. T. (2021) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2020.119413 · Cited by 258
Self-citationYao, D., Li, H., Dai, Y., & Wang, C.-H. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.127268 · Cited by 241
Yao, D., & Wang, C.-H. (2020) · Applied Energy · doi:10.1016/j.apenergy.2020.114819 · Cited by 237
Gong, J., Liu, J., Chen, X., Jiang, Z., Wen, X., Mijowska, E., & Tang, T. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta05118a · Cited by 198
Wang, J., Shen, B., Lan, M., Kang, D., & Wu, C. (2020) · Catalysis Today · doi:10.1016/j.cattod.2019.01.058 · Cited by 178
Self-citationGraphene nanosheets derived from plastic waste for the application of DSSCs and supercapacitors
Pandey, S., Karakoti, M., Surana, K., Dhapola, P. S., SanthiBhushan, B., Ganguly, S., Singh, P. K., Abbas, A., Srivastava, A., & Sahoo, N. G. (2021) · Scientific Reports · doi:10.1038/s41598-021-83483-8 · Cited by 155
Non-biodegradable polymeric waste pyrolysis for energy recovery
Dwivedi, P., Mishra, P. K., Mondal, M. K., & Srivastava, N. (2019) · Heliyon · doi:10.1016/j.heliyon.2019.e02198 · Cited by 146
Gong, J., Michalkiewicz, B., Chen, X., Mijowska, E., Liu, J., Jiang, Z., Wen, X., & Tang, T. (2014) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc500603h · Cited by 136
Wen, Y., Kierzek, K., Chen, X., Gong, J., Liu, J., Niu, R., Mijowska, E., & Tang, T. (2019) · Waste Management · doi:10.1016/j.wasman.2019.03.006 · Cited by 127
Yao, D., Li, H., Mohan, B. C., Prabhakar, A. K., Dai, Y., & Wang, C.-H. (2022) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.1c05945 · Cited by 109
Structure-oriented conversions of plastics to carbon nanomaterials
Ren, S., Xu, X., Hu, K., Tian, W., Duan, X., Yi, J., & Wang, S. (2022) · Carbon Research · doi:10.1007/s44246-022-00016-2 · Cited by 98
Carbon nanotubes synthetized from gaseous products of waste polymer pyrolysis and their application
Borsodi, N., Szentes, A., Miskolczi, N., Wu, C., & Liu, X. (2016) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2016.05.018 · Cited by 86
Self-citationWen, Y., Kierzek, K., Min, J., Chen, X., Gong, J., Niu, R., Wen, X., Azadmanjiri, J., Mijowska, E., & Tang, T. (2020) · Journal of Applied Polymer Science · doi:10.1002/app.48338 · Cited by 84
Huang, Z., Zheng, Y., Zhang, H., Li, F., Zeng, Y., Jia, Q., Zhang, J., Li, J., & Zhang, S. (2021) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2021.02.067 · Cited by 77
Chen, W. Q., Fu, X., Veksha, A., Lipik, V., & Lisak, G. (2022) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2022.131868 · Cited by 37
Wu, Q., Lv, X., Xu, N., Xin, L., Lin, G., Chen, K., & He, M. (2023) · Carbon · doi:10.1016/j.carbon.2023.118492 · Cited by 27
Holistic utilization of waste plastics through a tandem process
Dai, L., Karakas, O., Lata, S., Cobb, K., Lei, H., He, C., Cheng, Y., Chen, P., & Ruan, R. (2023) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2023.110547 · Cited by 12
Palanisamy, M., Perumal, R., Zhang, D., Wang, H., Maximova, O., Rokhinson, L., & Pol, V. G. (2024) · Journal of Materials Chemistry A · doi:10.1039/d4ta01354a · Cited by 5
Metadata
- Authors
- Wu, C., Nahil, M. A., Miskolczi, N., Huang, J., & Williams, P. T.
- Venue
- Environmental Science & Technology
- Publisher
- American Chemical Society (ACS)
- Published
- 2013-12-06
- Volume
- 48
- Issue
- 1
- Pages
- 819-826
- ISSN
- 0013-936X (ISSN-L)
- 1520-5851
- OpenAlex
- W2055639262
- Cited by
- 241
- References
- 0
- FWCI
- 4.61
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.