Flash Carbonization of Biomass
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
We describe the ignition and control of a flash fire at elevated pressure (≈1 MPa) within a packed bed of biomass. The fire moves upward through the bed, against the downward flow of air, triggering the transformation of biomass into gas at elevated pressure, and charcoal with fixed-carbon yields that reach the thermochemical equilibrium “limit” in <30 min of reaction time. In a typical experiment 65% of the moist feedstock mass is converted into a combustible gas at 1 MPa, and 40% of the dry mass remains as charcoal, retaining as much as 66% of the energy content of the feedstock. Biomass feedstocks included woods (Leucaena and oak) and agricultural byproducts (macadamia nut shells and corncob). In the case of corncob, the fixed-carbon yield attained the theoretical limit (28%), and the bed was fully carbonized after 20 min. Some of these findings were unexpected. For example, thermochemical equilibrium calculations predicted a negligible influence of pressure on charcoal yields, but we observed considerable improvements at modest elevated pressures (e.g., 1 MPa). Furthermore, the fixed-carbon yields for oak wood and corncob in this work exceeded the yields obtained at similar elevated pressures in the absence of air within an electrically heated autoclave. Some qualitative kinetic explanations are offered to explain these unexpected results.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Attainment of the Theoretical Yield of Carbon from Biomass
Antal, M. J., Allen, S. G., Dai, X., Shimizu, B., Tam, M. S., & Grønli, M. (2000) · Industrial & Engineering Chemistry Research · doi:10.1021/ie000511u · Cited by 265
Self-citation
Cited by
Application of biochar for the removal of pollutants from aqueous solutions
Tan, X., Liu, Y., Zeng, G., Wang, X., Hu, X., Gu, Y., & Yang, Z. (2015) · Chemosphere · doi:10.1016/j.chemosphere.2014.12.058 · Cited by 2,081
“The reaction time of the process is below 30 min, and the temperature is in the range of 300–600 C (Antal et al., 2003; Meyer et al., 2011).”
Modeling chemical and physical processes of wood and biomass pyrolysis
DIBLASI, C. (2008) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2006.12.001 · Cited by 1,752
Production and utilization of biochar: A review
Cha, J. S., Park, S. H., Jung, S.-C., Ryu, C., Jeon, J.-K., Shin, M.-C., & Park, Y.-K. (2016) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2016.06.002 · Cited by 1,293
Surface chemistry variations among a series of laboratory-produced biochars
Mukherjee, A., Zimmerman, A. R., & Harris, W. (2011) · Geoderma · doi:10.1016/j.geoderma.2011.04.021 · Cited by 1,171
“For example, the surface area, porosity, and surface functional group and elemental composition have been investigated by researchers (Antal and Gronli, 2003; Antal et al., 2003; Baldock and Smernik, 2002; Bourke et al., 2007; Brown et al., 2006; Hammes et al., 2006; Zimmerman, 2010).”
BackgroundCharacterization of biochars to evaluate recalcitrance and agronomic performance
Enders, A., Hanley, K., Whitman, T., Joseph, S., & Lehmann, J. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2012.03.022 · Cited by 1,113
Rajkovich, S., Enders, A., Hanley, K., Hyland, C., Zimmerman, A. R., & Lehmann, J. (2012) · Biology and Fertility of Soils · doi:10.1007/s00374-011-0624-7 · Cited by 872
Pyrolysis for Biochar Purposes: A Review to Establish Current Knowledge Gaps and Research Needs
Manyà, J. J. (2012) · Environmental Science & Technology · doi:10.1021/es301029g · Cited by 836
Chemical Kinetics of Biomass Pyrolysis
Ranzi, E., Cuoci, A., Faravelli, T., Frassoldati, A., Migliavacca, G., Pierucci, S., & Sommariva, S. (2008) · Energy & Fuels · doi:10.1021/ef800551t · Cited by 757
Meyer, S., Glaser, B., & Quicker, P. (2011) · Environmental Science & Technology · doi:10.1021/es201792c · Cited by 660
Alhashimi, H. A., & Aktas, C. B. (2017) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2016.11.016 · Cited by 547
Charcoal volatile matter content influences plant growth and soil nitrogen transformations
Deenik, J. L., McClellan, T., Uehara, G., Antal, M. J., & Campbell, S. (2010) · Soil Science Society of America Journal · doi:10.2136/sssaj2009.0115 · Cited by 485
Self-citationMcHenry, M. P. (2009) · Agriculture, Ecosystems & Environment · doi:10.1016/j.agee.2008.08.006 · Cited by 460
Batista, E. M. C. C., Shultz, J., Matos, T. T. S., Fornari, M. R., Ferreira, T. M., Szpoganicz, B., de Freitas, R. A., & Mangrich, A. S. (2018) · Scientific Reports · doi:10.1038/s41598-018-28794-z · Cited by 392
Insight into biochar properties and its cost analysis
Ahmed, M. B., Zhou, J. L., Ngo, H. H., & Guo, W. (2016) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2015.11.002 · Cited by 375
Kumar, S., Loganathan, V. A., Gupta, R. B., & Barnett, M. O. (2011) · Journal of Environmental Management · doi:10.1016/j.jenvman.2011.05.013 · Cited by 354
Historical Developments of Pyrolysis Reactors: A Review
Garcia-Nunez, J. A., Pelaez-Samaniego, M. R., Garcia-Perez, M. E., Fonts, I., Abrego, J., Westerhof, R. J. M., & Garcia-Perez, M. (2017) · Energy & Fuels · doi:10.1021/acs.energyfuels.7b00641 · Cited by 331
Bourke, J., Manley-Harris, M., Fushimi, C., Dowaki, K., Nunoura, T., & Antal, M. J. (2007) · Industrial & Engineering Chemistry Research · doi:10.1021/ie070415u · Cited by 300
Self-citationBiomass derived functional carbon materials for supercapacitor applications
Rawat, S., Mishra, R. K., & Bhaskar, T. (2022) · Chemosphere · doi:10.1016/j.chemosphere.2021.131961 · Cited by 296
Criteria to Select Biochars for Field Studies based on Biochar Chemical Properties
Brewer, C. E., Unger, R., Schmidt-Rohr, K., & Brown, R. C. (2011) · BioEnergy Research · doi:10.1007/s12155-011-9133-7 · Cited by 286
Industrial biochar systems for atmospheric carbon removal: a review
Fawzy, S., Osman, A. I., Yang, H., Doran, J., & Rooney, D. W. (2021) · Environmental Chemistry Letters · doi:10.1007/s10311-021-01210-1 · Cited by 220
Yu, S., Zhang, W., Dong, X., Wang, F., Yang, W., Liu, C., & Chen, D. (2024) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2023.111638 · Cited by 79
Pyrolysis of Sugarcane Bagasse and Co-pyrolysis with an Argentinean Subbituminous Coal
Bonelli, P. R., Buonomo, E. L., & Cukierman, A. L. (2007) · Energy Sources, Part A: Recovery, Utilization, and Environmental Effects · doi:10.1080/00908310500281247 · Cited by 72
“It can be easily stored and/or transported or may also be upgraded to higher value carbon products (e.g., activated carbon, electrode carbon) (Antal et al., 2003).”
BackgroundKwapinski, W. (2019) · Char and Carbon Materials Derived from Biomass · doi:10.1016/b978-0-12-814893-8.00002-x · Cited by 14
Metadata
- Authors
- Antal, Mochidzuki, K., & Paredes, L. S.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2003-07-11
- Volume
- 42
- Issue
- 16
- Pages
- 3690-3699
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2023655841
- Cited by
- 157
- References
- 1
- FWCI
- 1.02
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.