The DOI matches its Crossref record.
Flue-Gas Carbon Capture on Carbonaceous Sorbents: Toward a Low-Cost Multifunctional Carbon Filter for “Green” Energy Producers
Abstract
A low-pressure Carbon Filter Process (patent pending) is proposed to capture carbon dioxide (CO 2 ) from flue gas. This filter is filled with a low-cost carbonaceous sorbent, such as activated carbon or charcoal, which has a high affinity (and, hence, high capacity) to CO 2 but not to nitrogen (N 2 ). This, in turn, leads to a high CO 2 /N 2 selectivity, especially at low pressures. The Carbon Filter Process proposed in this work can recover at least 90% of flue-gas CO 2 of 90%+ purity at a fraction of the cost normally associated with the conventional amine absorption process. The Carbon Filter Process requires neither expensive materials nor flue-gas compression or refrigeration, and it is easy to heat integrate with an existing or grassroots power plant without affecting the cost of the produced electricity too much. An abundant supply of low-cost CO 2 from electricity producers is good news for enhanced oil recovery (EOR) and enhanced coal-bed methane recovery (ECBMR) operators, because it will lead to higher oil and gas recovery rates in an environmentally sensitive manner. A CO 2 -rich mixture that contains some nitrogen is much less expensive to separate from flue-gas than pure CO 2; therefore, mixed CO 2 /N 2 -EOR and CO 2 /N 2 -ECBMR methods are proposed to maximize the overall carbon capture and utilization efficiency.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Carbon Dioxide Capture: Prospects for New Materials
D'Alessandro, D. M., Smit, B., & Long, J. R. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.201000431 · Cited by 4,046
Post-Combustion CO 2 Capture Using Solid Sorbents: A Review
Samanta, A., Zhao, A., Shimizu, G. K. H., Sarkar, P., & Gupta, R. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie200686q · Cited by 1,889
N‐Doped Polypyrrole‐Based Porous Carbons for CO2 Capture
Sevilla, M., Valle‐Vigón, P., & Fuertes, A. B. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201100291 · Cited by 936
Ben-Mansour, R., Habib, M. A., Bamidele, O. E., Basha, M., Qasem, N. A. A., Peedikakkal, A., Laoui, T., & Ali, M. (2016) · Applied Energy · doi:10.1016/j.apenergy.2015.10.011 · Cited by 722
Guide to CO2 Separations in Imidazolium-Based Room-Temperature Ionic Liquids
Bara, J. E., Carlisle, T. K., Gabriel, C. J., Camper, D., Finotello, A., Gin, D. L., & Noble, R. D. (2009) · Industrial & Engineering Chemistry Research · doi:10.1021/ie8016237 · Cited by 714
A review on solid adsorbents for carbon dioxide capture
Lee, S.-Y., & Park, S.-J. (2015) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2014.09.001 · Cited by 707
Recent advances in aerogels for environmental remediation applications: A review
Maleki, H. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.04.098 · Cited by 679
Carbon-Based Adsorbents for Postcombustion CO 2 Capture: A Critical Review
Creamer, A. E., & Gao, B. (2016) · Environmental Science & Technology · doi:10.1021/acs.est.6b00627 · Cited by 598
Yazaydın, A. Ö., Benin, A. I., Faheem, S. A., Jakubczak, P., Low, J. J., Willis, R. R., & Snurr, R. Q. (2009) · Chemistry of Materials · doi:10.1021/cm900049x · Cited by 588
The outlook for improved carbon capture technology
Rubin, E. S., Mantripragada, H., Marks, A., Versteeg, P., & Kitchin, J. (2012) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2012.03.003 · Cited by 576
Carbon dioxide utilization with C–N bond formation: carbon dioxide capture and subsequent conversion
Yang, Z.-Z., He, L.-N., Gao, J., Liu, A.-H., & Yu, B. (2012) · Energy & Environmental Science · doi:10.1039/c2ee02774g · Cited by 520
Qi, G., Wang, Y., Estevez, L., Duan, X., Anako, N., Park, A.-H. A., Li, W., Jones, C. W., & Giannelis, E. P. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00213e · Cited by 507
Analysis and Status of Post-Combustion Carbon Dioxide Capture Technologies
Bhown, A. S., & Freeman, B. C. (2011) · Environmental Science & Technology · doi:10.1021/es104291d · Cited by 489
Songolzadeh, M., Soleimani, M., Takht Ravanchi, M., & Songolzadeh, R. (2014) · The Scientific World Journal · doi:10.1155/2014/828131 · Cited by 478
Metal–organic frameworks for upgrading biogas via CO2 adsorption to biogas green energy
Chaemchuen, S., Kabir, N. A., Zhou, K., & Verpoort, F. (2013) · Chemical Society Reviews · doi:10.1039/c3cs60244c · Cited by 416
An overview of activated carbons utilization for the post-combustion carbon dioxide capture
Rashidi, N. A., & Yusup, S. (2016) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2015.11.002 · Cited by 394
A multi-scale framework for CO2 capture, utilization, and sequestration: CCUS and CCU
Hasan, M. M. F., First, E. L., Boukouvala, F., & Floudas, C. A. (2015) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2015.04.034 · Cited by 381
Ionic Liquids in Chemical Engineering
Werner, S., Haumann, M., & Wasserscheid, P. (2010) · Annual Review of Chemical and Biomolecular Engineering · doi:10.1146/annurev-chembioeng-073009-100915 · Cited by 373
Plaza, M. G., García, S., Rubiera, F., Pis, J. J., & Pevida, C. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2010.07.030 · Cited by 365
Structuring adsorbents and catalysts by processing of porous powders
Akhtar, F., Andersson, L., Ogunwumi, S., Hedin, N., & Bergström, L. (2014) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2014.01.008 · Cited by 363
Hypercrosslinked organic polymer networks as potential adsorbents for pre-combustion CO2 capture
Martín, C. F., Stöckel, E., Clowes, R., Adams, D. J., Cooper, A. I., Pis, J. J., Rubiera, F., & Pevida, C. (2011) · Journal of Materials Chemistry · doi:10.1039/c0jm03534c · Cited by 334
Valorisation of spent coffee grounds as CO2 adsorbents for postcombustion capture applications
Plaza, M. G., González, A. S., Pevida, C., Pis, J. J., & Rubiera, F. (2012) · Applied Energy · doi:10.1016/j.apenergy.2012.05.028 · Cited by 313
A review of mathematical modeling of fixed-bed columns for carbon dioxide adsorption
Shafeeyan, M. S., Wan Daud, W. M. A., & Shamiri, A. (2014) · Chemical Engineering Research and Design · doi:10.1016/j.cherd.2013.08.018 · Cited by 293
Abscheidung von Kohlendioxid: Perspektiven für neue Materialien
D'Alessandro, D. M., Smit, B., & Long, J. R. (2010) · Angewandte Chemie · doi:10.1002/ange.201000431 · Cited by 291
Sustainable biomass-based carbon adsorbents for post-combustion CO2 capture
González, A. S., Plaza, M. G., Rubiera, F., & Pevida, C. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.06.118 · Cited by 280
Activated carbons prepared from hydrothermally carbonized waste biomass used as adsorbents for CO2
Hao, W., Björkman, E., Lilliestråle, M., & Hedin, N. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.02.028 · Cited by 277
Evaluation of solid sorbents as a retrofit technology for CO2 capture
Sjostrom, S., & Krutka, H. (2010) · Fuel · doi:10.1016/j.fuel.2009.11.019 · Cited by 271
Daglar, H., & Keskin, S. (2020) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2020.213470 · Cited by 255
A high adsorption capacity bamboo biochar for CO2 capture for low temperature heat utilization
Ji, Y., Zhang, C., Zhang, X. J., Xie, P. F., Wu, C., & Jiang, L. (2022) · Separation and Purification Technology · doi:10.1016/j.seppur.2022.121131 · Cited by 140
Two-Stage VPSA Process for CO2 Capture from Flue Gas Using Activated Carbon Beads
Shen, C., Liu, Z., Li, P., & Yu, J. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie202097y · Cited by 138
Plaza, M. G., García, S., Rubiera, F., Pis, J. J., & Pevida, C. (2011) · Separation and Purification Technology · doi:10.1016/j.seppur.2011.04.015 · Cited by 100
Zhao, R., Liu, L., Zhao, L., Deng, S., Li, S., Zhang, Y., & Li, H. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.01.009 · Cited by 75
Karimi, M., C. Silva, J. A., Gonçalves, C. N. D. P., L. Diaz de Tuesta, J., Rodrigues, A. E., & Gomes, H. T. (2018) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.8b00953 · Cited by 70
Polyethyleneimine-loaded bimodal porous silica as low-cost and high-capacity sorbent for CO2 capture
Witoon, T. (2012) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2012.09.014 · Cited by 62
Green coffee based CO2 adsorbent with high performance in postcombustion conditions
Plaza, M. G., González, A. S., Pevida, C., & Rubiera, F. (2015) · Fuel · doi:10.1016/j.fuel.2014.10.014 · Cited by 47
Influence of Water Vapor on CO2 Adsorption Using a Biomass-Based Carbon
Plaza, M. G., González, A. S., Pevida, C., & Rubiera, F. (2014) · Industrial & Engineering Chemistry Research · doi:10.1021/ie500342q · Cited by 41
Roberts, A. D., Lee, J.-S. M., Wong, S. Y., Li, X., & Zhang, H. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta09078h · Cited by 36
Evaluation of the cyclic capacity of low-cost carbon adsorbents for post-combustion CO2 capture
Plaza, M. G., Pevida, C., Pis, J. J., & Rubiera, F. (2011) · Energy Procedia · doi:10.1016/j.egypro.2011.01.178 · Cited by 33
Metadata
- Authors
- Radosz, M., Hu, X., Krutkramelis, K., & Shen, Y.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2008-04-29
- Volume
- 47
- Issue
- 10
- Pages
- 3783-3794
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2032591598
- Cited by
- 223
- References
- 0
- FWCI
- 32.72
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.