The DOI matches its Crossref record; 22 of the 22 references it cites were found in a registry or an index.
Opportunity of Spinel Ferrite Materials in Nonvolatile Memory Device Applications Based on Their Resistive Switching Performances
Abstract
The opportunity of spinel ferrites in nonvolatile memory device applications has been demonstrated by the resistive switching performance characteristics of a Pt/NiFe(2)O(4)/Pt structure, such as low operating voltage, high device yield, long retention time (up to 10(5) s), and good endurance (up to 2.2 × 10(4) cycles). The dominant conduction mechanisms are Ohmic conduction in the low-resistance state and in the lower-voltage region of the high-resistance state and Schottky emission in the higher-voltage region of the high-resistance state. On the basis of measurements of the temperature dependence of the resistances and magnetic properties in different resistance states, we explain the physical mechanism of resistive switching of Pt/NiFe(2)O(4)/Pt devices using the model of formation and rupture of conducting filaments by considering the thermal effect of oxygen vacancies and changes in the valences of cations due to the redox effect.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Redox‐Based Resistive Switching Memories – Nanoionic Mechanisms, Prospects, and Challenges
Waser, R., Dittmann, R., Staikov, G., & Szot, K. (2009) · Advanced Materials · doi:10.1002/adma.200900375 · Cited by 5,080
Nanoionics-based resistive switching memories
Waser, R., & Aono, M. (2007) · Nature Materials · doi:10.1038/nmat2023 · Cited by 4,923
Resistive switching in transition metal oxides
Sawa, A. (2008) · Materials Today · doi:10.1016/s1369-7021(08)70119-6 · Cited by 2,948
Lee, M.-J., Lee, C. B., Lee, D., Lee, S. R., Chang, M., Hur, J. H., Kim, Y.-B., Kim, C.-J., Seo, D. H., Seo, S., et al. (2011) · Nature Materials · doi:10.1038/nmat3070 · Cited by 2,228
Resistive switching mechanism of TiO2 thin films grown by atomic-layer deposition
Choi, B. J., Jeong, D. S., Kim, S. K., Rohde, C., Choi, S., Oh, J. H., Kim, H. J., Hwang, C. S., Szot, K., Waser, R., et al. (2005) · Journal of Applied Physics · doi:10.1063/1.2001146 · Cited by 1,150
Reproducible resistance switching in polycrystalline NiO films
Seo, S., Lee, M. J., Seo, D. H., Jeoung, E. J., Suh, D.-S., Joung, Y. S., Yoo, I. K., Hwang, I. R., Kim, S. H., Byun, I. S., et al. (2004) · Applied Physics Letters · doi:10.1063/1.1831560 · Cited by 933
Role of Oxygen Vacancies in Cr‐Doped SrTiO3 for Resistance‐Change Memory
Janousch, M., Meijer, G. I., Staub, U., Delley, B., Karg, S. F., & Andreasson, B. P. (2007) · Advanced Materials · doi:10.1002/adma.200602915 · Cited by 530
Nanometer-scale switches using copper sulfide
Sakamoto, T., Sunamura, H., Kawaura, H., Hasegawa, T., Nakayama, T., & Aono, M. (2003) · Applied Physics Letters · doi:10.1063/1.1572964 · Cited by 512
Random Circuit Breaker Network Model for Unipolar Resistance Switching
Chae, S. C., Lee, J. S., Kim, S., Lee, S. B., Chang, S. H., Liu, C., Kahng, B., Shin, H., Kim, D., Jung, C. U., et al. (2008) · Advanced Materials · doi:10.1002/adma.200702024 · Cited by 349
Localized Metallic Conductivity and Self-Healing during Thermal Reduction ofSrTiO3
Szot, K., Speier, W., Carius, R., Zastrow, U., & Beyer, W. (2002) · Physical Review Letters · doi:10.1103/physrevlett.88.075508 · Cited by 297
Cited by
Pan, F., Gao, S., Chen, C., Song, C., & Zeng, F. (2014) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2014.06.002 · Cited by 1,403
Metadata
- Authors
- Hu, W., Qin, N., Wu, G., Lin, Y., Li, S., & Bao, D.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2012-08-29
- Volume
- 134
- Issue
- 36
- Pages
- 14658-14661
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W1980376519
- Cited by
- 289
- References
- 22
- FWCI
- 6.51
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.