The DOI matches its Crossref record; 54 of the 54 references it cites were found in a registry or an index.
Solvent-Mediated Crystallization of CH3NH3SnI3Films for Heterojunction Depleted Perovskite Solar Cells
Open accessAbstract
Organo-lead halide perovskite solar cells have gained enormous significance and have now achieved power conversion efficiencies of ∼20%. However, the potential toxicity of lead in these systems raises environmental concerns for widespread deployment. Here we investigate solvent effects on the crystallization of the lead-free methylammonium tin triiodide (CH3NH3SnI3) perovskite films in a solution growth process. Highly uniform, pinhole-free perovskite films are obtained from a dimethyl sulfoxide (DMSO) solution via a transitional SnI2·3DMSO intermediate phase. This high-quality perovskite film enables the realization of heterojunction depleted solar cells based on mesoporous TiO2 layer but in the absence of any hole-transporting material with an unprecedented photocurrent up to 21 mA cm(-2). Charge extraction and transient photovoltage decay measurements reveal high carrier densities in the CH3NH3SnI3 perovskite device which are one order of magnitude larger than CH3NH3PbI3-based devices but with comparable recombination lifetimes in both devices. The relatively high background dark carrier density of the Sn-based perovskite is responsible for the lower photovoltaic efficiency in comparison to the Pb-based analogues. These results provide important progress toward achieving improved perovskite morphology control in realizing solution-processed highly efficient lead-free perovskite solar cells.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sheldrick, G. M. (2008) · Acta Crystallographica Section A Foundations of Crystallography · doi:10.1107/s0108767307043930 · Cited by 87,804
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Efficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
Long-Range Balanced Electron- and Hole-Transport Lengths in Organic-Inorganic CH 3 NH 3 PbI 3
Xing, G., Mathews, N., Sun, S., Lim, S. S., Lam, Y. M., Grätzel, M., Mhaisalkar, S., & Sum, T. C. (2013) · Science · doi:10.1126/science.1243167 · Cited by 6,909
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Interface engineering of highly efficient perovskite solar cells
Zhou, H., Chen, Q., Li, G., Luo, S., Song, T.-B., Duan, H.-S., Hong, Z., You, J., Liu, Y., & Yang, Y. (2014) · Science · doi:10.1126/science.1254050 · Cited by 6,632
Stoumpos, C. C., Malliakas, C. D., & Kanatzidis, M. G. (2013) · Inorganic Chemistry · doi:10.1021/ic401215x · Cited by 5,416
Self-citation
Cited by
Halide Perovskite Photovoltaics: Background, Status, and Future Prospects
Jena, A. K., Kulkarni, A., & Miyasaka, T. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00539 · Cited by 3,087
Ruddlesden–Popper Hybrid Lead Iodide Perovskite 2D Homologous Semiconductors
Stoumpos, C. C., Cao, D. H., Clark, D. J., Young, J., Rondinelli, J. M., Jang, J. I., Hupp, J. T., & Kanatzidis, M. G. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b00847 · Cited by 2,130
Self-citationPerovskite-perovskite tandem photovoltaics with optimized band gaps
Eperon, G. E., Leijtens, T., Bush, K. A., Prasanna, R., Green, T., Wang, J. T.-W., McMeekin, D. P., Volonakis, G., Milot, R. L., May, R., et al. (2016) · Science · doi:10.1126/science.aaf9717 · Cited by 1,499
Liao, Y., Liu, H., Zhou, W., Yang, D., Shang, Y., Shi, Z., Li, B., Jiang, X., Zhang, L., Quan, L. N., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b01815 · Cited by 877
The Renaissance of Halide Perovskites and Their Evolution as Emerging Semiconductors
Stoumpos, C. C., & Kanatzidis, M. G. (2015) · Accounts of Chemical Research · doi:10.1021/acs.accounts.5b00229 · Cited by 820
Self-citationLee, S. J., Shin, S. S., Kim, Y. C., Kim, D., Ahn, T. K., Noh, J. H., Seo, J., & Seok, S. I. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b00142 · Cited by 817
Liao, W., Zhao, D., Yu, Y., Grice, C. R., Wang, C., Cimaroli, A. J., Schulz, P., Meng, W., Zhu, K., Xiong, R., et al. (2016) · Advanced Materials · doi:10.1002/adma.201602992 · Cited by 793
Highly stable, phase pure Cs2AgBiBr6 double perovskite thin films for optoelectronic applications
Greul, E., Petrus, M. L., Binek, A., Docampo, P., & Bein, T. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta06816f · Cited by 772
Shi, Z., Guo, J., Chen, Y., Li, Q., Pan, Y., Zhang, H., Xia, Y., & Huang, W. (2017) · Advanced Materials · doi:10.1002/adma.201605005 · Cited by 735
Causes and Solutions of Recombination in Perovskite Solar Cells
Chen, J., & Park, N. (2019) · Advanced Materials · doi:10.1002/adma.201803019 · Cited by 733
Enhanced stability and efficiency in hole-transport-layer-free CsSnI3 perovskite photovoltaics
Marshall, K. P., Walker, M., Walton, R. I., & Hatton, R. A. (2016) · Nature Energy · doi:10.1038/nenergy.2016.178 · Cited by 644
Synthetic Approaches for Halide Perovskite Thin Films
Dunlap-Shohl, W. A., Zhou, Y., Padture, N. P., & Mitzi, D. B. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00318 · Cited by 631
A critical review on tin halide perovskite solar cells
Konstantakou, M., & Stergiopoulos, T. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00929a · Cited by 600
Importance of Reducing Vapor Atmosphere in the Fabrication of Tin-Based Perovskite Solar Cells
Song, T.-B., Yokoyama, T., Stoumpos, C. C., Logsdon, J., Cao, D. H., Wasielewski, M. R., Aramaki, S., & Kanatzidis, M. G. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.6b10734 · Cited by 598
Self-citation“Unleaded” Perovskites: Status Quo and Future Prospects of Tin‐Based Perovskite Solar Cells
Ke, W., Stoumpos, C. C., & Kanatzidis, M. G. (2019) · Advanced Materials · doi:10.1002/adma.201803230 · Cited by 533
Self-citationJokar, E., Chien, C., Tsai, C., Fathi, A., & Diau, E. W. (2019) · Advanced Materials · doi:10.1002/adma.201804835 · Cited by 513
Mixed‐Organic‐Cation Tin Iodide for Lead‐Free Perovskite Solar Cells with an Efficiency of 8.12%
Zhao, Z., Gu, F., Li, Y., Sun, W., Ye, S., Rao, H., Liu, Z., Bian, Z., & Huang, C. (2017) · Advanced Science · doi:10.1002/advs.201700204 · Cited by 505
Lead-free tin-halide perovskite solar cells with 13% efficiency
Nishimura, K., Kamarudin, M. A., Hirotani, D., Hamada, K., Shen, Q., Iikubo, S., Minemoto, T., Yoshino, K., & Hayase, S. (2020) · Nano Energy · doi:10.1016/j.nanoen.2020.104858 · Cited by 502
One-Step Synthesis of SnI2·(DMSO)x Adducts for High-Performance Tin Perovskite Solar Cells
Jiang, X., Li, H., Zhou, Q., Wei, Q., Wei, M., Jiang, L., Wang, Z., Peng, Z., Wang, F., Zang, Z., et al. (2021) · Journal of the American Chemical Society · doi:10.1021/jacs.1c03032 · Cited by 498
Recent advances in perovskite solar cells: efficiency, stability and lead-free perovskite
Yang, S., Fu, W., Zhang, Z., Chen, H., & Li, C.-Z. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00366h · Cited by 486
Wang, F., Jiang, X., Chen, H., Shang, Y., Liu, H., Wei, J., Zhou, W., He, H., Liu, W., & Ning, Z. (2018) · Joule · doi:10.1016/j.joule.2018.09.012 · Cited by 481
Recent progress in tin-based perovskite solar cells
Cao, J., & Yan, F. (2021) · Energy & Environmental Science · doi:10.1039/d0ee04007j · Cited by 479
Recent Advances in Flexible Perovskite Solar Cells: Fabrication and Applications
Yang, D., Yang, R., Priya, S., & Liu, S. (. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201809781 · Cited by 461
Lyu, M., Yun, J., Chen, P., Hao, M., & Wang, L. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602512 · Cited by 432
Lead-Free Perovskite Materials for Solar Cells
Wang, M., Wang, W., Ma, B., Shen, W., Liu, L., Cao, K., Chen, S., & Huang, W. (2021) · Nano-Micro Letters · doi:10.1007/s40820-020-00578-z · Cited by 423
Enhanced photovoltaic performance and stability with a new type of hollow 3D perovskite {en}FASnI 3
Ke, W., Stoumpos, C. C., Zhu, M., Mao, L., Spanopoulos, I., Liu, J., Kontsevoi, O. Y., Chen, M., Sarma, D., Zhang, Y., et al. (2017) · Science Advances · doi:10.1126/sciadv.1701293 · Cited by 414
Self-citationCao, D. H., Stoumpos, C. C., Yokoyama, T., Logsdon, J. L., Song, T.-B., Farha, O. K., Wasielewski, M. R., Hupp, J. T., & Kanatzidis, M. G. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00202 · Cited by 399
Self-citationHighly Stable and Efficient FASnI3‐Based Perovskite Solar Cells by Introducing Hydrogen Bonding
Meng, X., Lin, J., Liu, X., He, X., Wang, Y., Noda, T., Wu, T., Yang, X., & Han, L. (2019) · Advanced Materials · doi:10.1002/adma.201903721 · Cited by 386
Wang, A., Yan, X., Zhang, M., Sun, S., Yang, M., Shen, W., Pan, X., Wang, P., & Deng, Z. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b01329 · Cited by 383
Device simulation of lead-free CH 3 NH 3 SnI 3 perovskite solar cells with high efficiency
Du, H.-J., Wang, W.-C., & Zhu, J.-Z. (2016) · Chinese Physics B · doi:10.1088/1674-1056/25/10/108802 · Cited by 371
Rajagopal, A., Yang, Z., Jo, S. B., Braly, I. L., Liang, P., Hillhouse, H. W., & Jen, A. K. ‐. (2017) · Advanced Materials · doi:10.1002/adma.201702140 · Cited by 368
Stable Low‐Bandgap Pb–Sn Binary Perovskites for Tandem Solar Cells
Yang, Z., Rajagopal, A., Chueh, C., Jo, S. B., Liu, B., Zhao, T., & Jen, A. K. ‐. (2016) · Advanced Materials · doi:10.1002/adma.201602696 · Cited by 367
Yokoyama, T., Cao, D. H., Stoumpos, C. C., Song, T.-B., Sato, Y., Aramaki, S., & Kanatzidis, M. G. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b00118 · Cited by 353
Self-citationSoe, C. M. M., Nie, W., Stoumpos, C. C., Tsai, H., Blancon, J., Liu, F., Even, J., Marks, T. J., Mohite, A. D., & Kanatzidis, M. G. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201700979 · Cited by 341
Self-citationQin, M., Chan, P. F., & Lu, X. (2021) · Advanced Materials · doi:10.1002/adma.202105290 · Cited by 337
Device simulation of highly efficient eco-friendly CH3NH3SnI3 perovskite solar cell
Patel, P. K. (2021) · Scientific Reports · doi:10.1038/s41598-021-82817-w · Cited by 333
Carrier Diffusion Lengths of over 500 nm in Lead-Free Perovskite CH3NH3SnI3 Films
Ma, L., Hao, F., Stoumpos, C. C., Phelan, B. T., Wasielewski, M. R., & Kanatzidis, M. G. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b09257 · Cited by 327
Self-citationSurface-Controlled Oriented Growth of FASnI3 Crystals for Efficient Lead-free Perovskite Solar Cells
Meng, X., Wang, Y., Lin, J., Liu, X., He, X., Barbaud, J., Wu, T., Noda, T., Yang, X., & Han, L. (2020) · Joule · doi:10.1016/j.joule.2020.03.007 · Cited by 319
Jiang, F., Yang, D., Jiang, Y., Liu, T., Zhao, X., Ming, Y., Luo, B., Qin, F., Fan, J., Han, H., et al. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.7b10739 · Cited by 317
Formation of Hybrid Perovskite Tin Iodide Single Crystals by Top‐Seeded Solution Growth
Dang, Y., Zhou, Y., Liu, X., Ju, D., Xia, S., Xia, H., & Tao, X. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201511792 · Cited by 312
Efficient Lead-Free Solar Cells Based on Hollow {en}MASnI3 Perovskites
Ke, W., Stoumpos, C. C., Spanopoulos, I., Mao, L., Chen, M., Wasielewski, M. R., & Kanatzidis, M. G. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b09018 · Cited by 301
Self-citationSong, Z., Watthage, S. C., Phillips, A. B., & Heben, M. J. (2016) · Journal of Photonics for Energy · doi:10.1117/1.jpe.6.022001 · Cited by 297
Nakamura, T., Yakumaru, S., Truong, M. A., Kim, K., Liu, J., Hu, S., Otsuka, K., Hashimoto, R., Murdey, R., Sasamori, T., et al. (2020) · Nature Communications · doi:10.1038/s41467-020-16726-3 · Cited by 293
Lead‐Free Hybrid Perovskite Absorbers for Viable Application: Can We Eat the Cake and Have It too?
Liang, L., & Gao, P. (2018) · Advanced Science · doi:10.1002/advs.201700331 · Cited by 291
Lead-free tin perovskite solar cells
Wu, T., Liu, X., Luo, X., Lin, X., Cui, D., Wang, Y., Segawa, H., Zhang, Y., & Han, L. (2021) · Joule · doi:10.1016/j.joule.2021.03.001 · Cited by 291
Self‐Repairing Tin‐Based Perovskite Solar Cells with a Breakthrough Efficiency Over 11%
Wang, C., Gu, F., Zhao, Z., Rao, H., Qiu, Y., Cai, Z., Zhan, G., Li, X., Sun, B., Yu, X., et al. (2020) · Advanced Materials · doi:10.1002/adma.201907623 · Cited by 287
Gu, F., Ye, S., Zhao, Z., Rao, H., Liu, Z., Bian, Z., & Huang, C. (2018) · Solar RRL · doi:10.1002/solr.201800136 · Cited by 275
Zhang, H., Nazeeruddin, M. K., & Choy, W. C. H. (2019) · Advanced Materials · doi:10.1002/adma.201805702 · Cited by 275
The Future of Perovskite Photovoltaics—Thermal Evaporation or Solution Processing?
Vaynzof, Y. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202003073 · Cited by 272
Conventional Solvent Oxidizes Sn(II) in Perovskite Inks
Saidaminov, M. I., Spanopoulos, I., Abed, J., Ke, W., Wicks, J., Kanatzidis, M. G., & Sargent, E. H. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c00402 · Cited by 270
Self-citationKamarudin, M. A., Hirotani, D., Wang, Z., Hamada, K., Nishimura, K., Shen, Q., Toyoda, T., Iikubo, S., Minemoto, T., Yoshino, K., et al. (2019) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.9b02024 · Cited by 268
Zhu, Z., Chueh, C., Li, N., Mao, C., & Jen, A. K. ‐. (2018) · Advanced Materials · doi:10.1002/adma.201703800 · Cited by 267
Jin, Z., Zhang, Z., Xiu, J., Song, H., Gatti, T., & He, Z. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta05433j · Cited by 263
Tin-Based Defects and Passivation Strategies in Tin-Related Perovskite Solar Cells
Li, B., Chang, B., Pan, L., Li, Z., Fu, L., He, Z., & Yin, L. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c01796 · Cited by 258
Solution‐Processable Perovskite Solar Cells toward Commercialization: Progress and Challenges
Wang, P., Wu, Y., Cai, B., Ma, Q., Zheng, X., & Zhang, W. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201807661 · Cited by 255
Ke, W., Stoumpos, C. C., Logsdon, J. L., Wasielewski, M. R., Yan, Y., Fang, G., & Kanatzidis, M. G. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b08790 · Cited by 254
Self-citationReview on recent progress of lead-free halide perovskites in optoelectronic applications
Li, J., Duan, J., Yang, X., Duan, Y., Yang, P., & Tang, Q. (2021) · Nano Energy · doi:10.1016/j.nanoen.2020.105526 · Cited by 254
Guo, Z., & Lin, B. (2021) · Solar Energy · doi:10.1016/j.solener.2021.09.030 · Cited by 95
Sajid, S., Alzahmi, S., Salem, I. B., Park, J., & Obaidat, I. M. (2023) · Nanomaterials · doi:10.3390/nano13060983 · Cited by 31
Metadata
- Authors
- Hao, F., Stoumpos, C. C., Guo, P., Zhou, N., Marks, T. J., Chang, R. P. H., & Kanatzidis, M. G.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-08-27
- Volume
- 137
- Issue
- 35
- Pages
- 11445-11452
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W1648474991
- Cited by
- 759
- References
- 54
- FWCI
- 28.39
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.