The DOI matches its Crossref record; 43 of the 43 references it cites were found in a registry or an index.
Transition Metal Dichalcogenide Atomic Layers for Lithium Polysulfides Electrocatalysis
Abstract
Lithium–sulfur (Li–S) chemistry is projected to be one of the most promising for next-generation battery technology, and controlling the inherent “polysulfide shuttle” process has become a key research topic in the field. Regulating intermediary polysulfide dissolution by understanding the metamorphosis is essential for realizing stable and high-energy-density Li–S batteries. As of yet, a clear consensus on the basic surface/interfacial properties of the sulfur electrode has not been achieved, although the catalytic phenomenon has been shown to result in enhanced cell stability. Herein, we present evidence that the polysulfide shuttle in a Li–S battery can be stabilized by using electrocatalytic transition metal dichalcogenides (TMDs). Physicochemical transformations at the electrode/electrolyte interface of atomically thin monolayer/few-layer TMDs were elucidated using a combination of spectroscopic and microscopic analysis techniques. Preferential adsorption of higher order liquid polysulfides and subsequent conversion to lower order solid species in the form of dendrite-like structures on the edge sites of TMDs have been demonstrated. Further, detailed electrochemical properties such as activation energy, exchange current density, rate capabilities, cycle life, etc. have been investigated by synthesizing catalytically active nanostructured TMDs in bulk quantity using a liquid-based shear-exfoliation method. Unveiling a specific capacity of 590 mAh g –1 at 0.5 C rate and stability over 350 cycles clearly indicates yet another promising application of two-dimensional TMDs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The chemistry of two-dimensional layered transition metal dichalcogenide nanosheets
Chhowalla, M., Shin, H. S., Eda, G., Li, L.-J., Loh, K. P., & Zhang, H. (2013) · Nature Chemistry · doi:10.1038/nchem.1589 · Cited by 10,034
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Graphene, related two-dimensional crystals, and hybrid systems for energy conversion and storage
Bonaccorso, F., Colombo, L., Yu, G., Stoller, M., Tozzini, V., Ferrari, A. C., Ruoff, R. S., & Pellegrini, V. (2015) · Science · doi:10.1126/science.1246501 · Cited by 3,454
Enhanced catalytic activity in strained chemically exfoliated WS2 nanosheets for hydrogen evolution
Voiry, D., Yamaguchi, H., Li, J., Silva, R., Alves, D. C. B., Fujita, T., Chen, M., Asefa, T., Shenoy, V. B., Eda, G., et al. (2013) · Nature Materials · doi:10.1038/nmat3700 · Cited by 2,641
Paton, K. R., Varrla, E., Backes, C., Smith, R. J., Khan, U., O’Neill, A., Boland, C., Lotya, M., Istrate, O. M., King, P., et al. (2014) · Nature Materials · doi:10.1038/nmat3944 · Cited by 2,401
Cabana, J., Monconduit, L., Larcher, D., & Palacín, M. R. (2010) · Advanced Materials · doi:10.1002/adma.201000717 · Cited by 2,361
Vertical and in-plane heterostructures from WS2/MoS2 monolayers
Gong, Y., Lin, J., Wang, X., Shi, G., Lei, S., Lin, Z., Zou, X., Ye, G., Vajtai, R., Yakobson, B. I., et al. (2014) · Nature Materials · doi:10.1038/nmat4091 · Cited by 2,323
Grains and grain boundaries in highly crystalline monolayer molybdenum disulphide
van der Zande, A. M., Huang, P. Y., Chenet, D. A., Berkelbach, T. C., You, Y., Lee, G.-H., Heinz, T. F., Reichman, D. R., Muller, D. A., & Hone, J. C. (2013) · Nature Materials · doi:10.1038/nmat3633 · Cited by 2,197
Wei Seh, Z., Li, W., Cha, J. J., Zheng, G., Yang, Y., McDowell, M. T., Hsu, P.-C., & Cui, Y. (2013) · Nature Communications · doi:10.1038/ncomms2327 · Cited by 2,107
Cited by
Cai, Z., Liu, B., Zou, X., & Cheng, H.-M. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00536 · Cited by 1,495
Du, Z., Chen, X., Hu, W., Chuang, C., Xie, S., Hu, A., Yan, W., Kong, X., Wu, X., Ji, H., et al. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.8b12973 · Cited by 1,490
Liu, D., Zhang, C., Zhou, G., Lv, W., Ling, G., Zhi, L., & Yang, Q. (2018) · Advanced Science · doi:10.1002/advs.201700270 · Cited by 956
He, J., Hartmann, G., Lee, M., Hwang, G. S., Chen, Y., & Manthiram, A. (2019) · Energy & Environmental Science · doi:10.1039/c8ee03252a · Cited by 589
Lim, W., Kim, S., Jo, C., & Lee, J. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201902413 · Cited by 535
Layered Transition Metal Dichalcogenide‐Based Nanomaterials for Electrochemical Energy Storage
Yun, Q., Li, L., Hu, Z., Lu, Q., Chen, B., & Zhang, H. (2020) · Advanced Materials · doi:10.1002/adma.201903826 · Cited by 506
A review on the status and challenges of electrocatalysts in lithium-sulfur batteries
He, J., & Manthiram, A. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2019.04.038 · Cited by 479
Recent Progress on Two-Dimensional Materials
Chang, C., Chen, W., Chen, Y., Chen, Y., Chen, Y., Ding, F., Fan, C., Jin Fan, H., Fan, Z., Gong, C., et al. (2021) · Acta Physico Chimica Sinica · doi:10.3866/pku.whxb202108017 · Cited by 472
Emerging Catalysts to Promote Kinetics of Lithium–Sulfur Batteries
Wang, P., Xi, B., Huang, M., Chen, W., Feng, J., & Xiong, S. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202002893 · Cited by 451
Recent Advances in Heterostructure Engineering for Lithium–Sulfur Batteries
Huang, S., Wang, Z., Von Lim, Y., Wang, Y., Li, Y., Zhang, D., & Yang, H. Y. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202003689 · Cited by 438
Liu, S., Li, J., Yan, X., Su, Q., Lu, Y., Qiu, J., Wang, Z., Lin, X., Huang, J., Liu, R., et al. (2018) · Advanced Materials · doi:10.1002/adma.201706895 · Cited by 404
Stabilized Li3N for efficient battery cathode prelithiation
Sun, Y., Li, Y., Sun, J., Li, Y., Pei, A., & Cui, Y. (2017) · Energy Storage Materials · doi:10.1016/j.ensm.2016.10.004 · Cited by 402
Propelling polysulfides transformation for high-rate and long-life lithium–sulfur batteries
Zheng, C., Niu, S., Lv, W., Zhou, G., Li, J., Fan, S., Deng, Y., Pan, Z., Li, B., Kang, F., et al. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.01.040 · Cited by 391
Xu, Z.-L., Lin, S., Onofrio, N., Zhou, L., Shi, F., Lu, W., Kang, K., Zhang, Q., & Lau, S. P. (2018) · Nature Communications · doi:10.1038/s41467-018-06629-9 · Cited by 391
Novel structured transition metal dichalcogenide nanosheets
Zhang, X., Lai, Z., Ma, Q., & Zhang, H. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00094h · Cited by 386
Wang, D., Li, F., Lian, R., Xu, J., Kan, D., Liu, Y., Chen, G., Gogotsi, Y., & Wei, Y. (2019) · ACS Nano · doi:10.1021/acsnano.9b03412 · Cited by 385
Zhang, Z., Peng, H., Zhao, M., & Huang, J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707536 · Cited by 357
Two-Dimensional Materials to Address the Lithium Battery Challenges
Rojaee, R., & Shahbazian-Yassar, R. (2020) · ACS Nano · doi:10.1021/acsnano.9b08396 · Cited by 344
Sulfur Reduction Reaction in Lithium–Sulfur Batteries: Mechanisms, Catalysts, and Characterization
Zhou, L., Danilov, D. L., Qiao, F., Wang, J., Li, H., Eichel, R., & Notten, P. H. L. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202202094 · Cited by 343
Chen, X., Peng, L., Wang, L., Yang, J., Hao, Z., Xiang, J., Yuan, K., Huang, Y., Shan, B., Yuan, L., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-08818-6 · Cited by 328
Pang, Q., Kwok, C. Y., Kundu, D., Liang, X., & Nazar, L. F. (2019) · Joule · doi:10.1016/j.joule.2018.09.024 · Cited by 317
Zhang, B., Luo, C., Deng, Y., Huang, Z., Zhou, G., Lv, W., He, Y., Wan, Y., Kang, F., & Yang, Q. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202000091 · Cited by 317
Zhou, F., Li, Z., Luo, X., Wu, T., Jiang, B., Lu, L.-L., Yao, H.-B., Antonietti, M., & Yu, S.-H. (2018) · Nano Letters · doi:10.1021/acs.nanolett.7b04505 · Cited by 316
Wang, Y., Zhang, R., Pang, Y.-C., Chen, X., Lang, J., Xu, J., Xiao, C., Li, H., Xi, K., & Ding, S. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2018.05.019 · Cited by 312
Huang, S., Lim, Y. V., Zhang, X., Wang, Y., Zheng, Y., Kong, D., Ding, M., Yang, S. A., & Yang, H. Y. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.06.052 · Cited by 303
Two-dimensional transition metal dichalcogenides in supercapacitors and secondary batteries
Lin, L., Lei, W., Zhang, S., Liu, Y., Wallace, G. G., & Chen, J. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2019.02.023 · Cited by 294
Liu, W., Luo, C., Zhang, S., Zhang, B., Ma, J., Wang, X., Liu, W., Li, Z., Yang, Q.-H., & Lv, W. (2021) · ACS Nano · doi:10.1021/acsnano.1c00896 · Cited by 269
A Toolbox for Lithium–Sulfur Battery Research: Methods and Protocols
Zhang, G., Zhang, Z., Peng, H., Huang, J., & Zhang, Q. (2017) · Small Methods · doi:10.1002/smtd.201700134 · Cited by 260
Zhang, L., Chen, X., Wan, F., Niu, Z., Wang, Y., Zhang, Q., & Chen, J. (2018) · ACS Nano · doi:10.1021/acsnano.8b05466 · Cited by 259
Wang, C., Huang, J., Li, J., Cao, L., & Kajiyoshi, K. (2022) · Applied Surface Science · doi:10.1016/j.apsusc.2022.152620 · Cited by 40
Metadata
- Authors
- Babu, G., Masurkar, N., Al Salem, H., & Arava, L. M. R.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-12-21
- Volume
- 139
- Issue
- 1
- Pages
- 171-178
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2560303891
- Cited by
- 386
- References
- 43
- FWCI
- 19.97
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.