The DOI matches its Crossref record; 43 of the 43 references it cites were found in a registry or an index.
Transition Metal Dichalcogenide Atomic Layers for Lithium Polysulfides Electrocatalysis
Abstract
Lithium–sulfur (Li–S) chemistry is projected to be one of the most promising for next-generation battery technology, and controlling the inherent “polysulfide shuttle” process has become a key research topic in the field. Regulating intermediary polysulfide dissolution by understanding the metamorphosis is essential for realizing stable and high-energy-density Li–S batteries. As of yet, a clear consensus on the basic surface/interfacial properties of the sulfur electrode has not been achieved, although the catalytic phenomenon has been shown to result in enhanced cell stability. Herein, we present evidence that the polysulfide shuttle in a Li–S battery can be stabilized by using electrocatalytic transition metal dichalcogenides (TMDs). Physicochemical transformations at the electrode/electrolyte interface of atomically thin monolayer/few-layer TMDs were elucidated using a combination of spectroscopic and microscopic analysis techniques. Preferential adsorption of higher order liquid polysulfides and subsequent conversion to lower order solid species in the form of dendrite-like structures on the edge sites of TMDs have been demonstrated. Further, detailed electrochemical properties such as activation energy, exchange current density, rate capabilities, cycle life, etc. have been investigated by synthesizing catalytically active nanostructured TMDs in bulk quantity using a liquid-based shear-exfoliation method. Unveiling a specific capacity of 590 mAh g –1 at 0.5 C rate and stability over 350 cycles clearly indicates yet another promising application of two-dimensional TMDs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The chemistry of two-dimensional layered transition metal dichalcogenide nanosheets
Chhowalla, M., Shin, H. S., Eda, G., Li, L.-J., Loh, K. P., & Zhang, H. (2013) · Nature Chemistry · doi:10.1038/nchem.1589 · Cited by 10,034
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Graphene, related two-dimensional crystals, and hybrid systems for energy conversion and storage
Bonaccorso, F., Colombo, L., Yu, G., Stoller, M., Tozzini, V., Ferrari, A. C., Ruoff, R. S., & Pellegrini, V. (2015) · Science · doi:10.1126/science.1246501 · Cited by 3,454
Enhanced catalytic activity in strained chemically exfoliated WS2 nanosheets for hydrogen evolution
Voiry, D., Yamaguchi, H., Li, J., Silva, R., Alves, D. C. B., Fujita, T., Chen, M., Asefa, T., Shenoy, V. B., Eda, G., et al. (2013) · Nature Materials · doi:10.1038/nmat3700 · Cited by 2,641
Paton, K. R., Varrla, E., Backes, C., Smith, R. J., Khan, U., O’Neill, A., Boland, C., Lotya, M., Istrate, O. M., King, P., et al. (2014) · Nature Materials · doi:10.1038/nmat3944 · Cited by 2,401
Cabana, J., Monconduit, L., Larcher, D., & Palacín, M. R. (2010) · Advanced Materials · doi:10.1002/adma.201000717 · Cited by 2,361
Vertical and in-plane heterostructures from WS2/MoS2 monolayers
Gong, Y., Lin, J., Wang, X., Shi, G., Lei, S., Lin, Z., Zou, X., Ye, G., Vajtai, R., Yakobson, B. I., et al. (2014) · Nature Materials · doi:10.1038/nmat4091 · Cited by 2,323
Grains and grain boundaries in highly crystalline monolayer molybdenum disulphide
van der Zande, A. M., Huang, P. Y., Chenet, D. A., Berkelbach, T. C., You, Y., Lee, G.-H., Heinz, T. F., Reichman, D. R., Muller, D. A., & Hone, J. C. (2013) · Nature Materials · doi:10.1038/nmat3633 · Cited by 2,197
Wei Seh, Z., Li, W., Cha, J. J., Zheng, G., Yang, Y., McDowell, M. T., Hsu, P.-C., & Cui, Y. (2013) · Nature Communications · doi:10.1038/ncomms2327 · Cited by 2,107
A highly efficient polysulfide mediator for lithium–sulfur batteries
Liang, X., Hart, C., Pang, Q., Garsuch, A., Weiss, T., & Nazar, L. F. (2015) · Nature Communications · doi:10.1038/ncomms6682 · Cited by 2,062
Ji, X., & Nazar, L. F. (2010) · Journal of Materials Chemistry · doi:10.1039/b925751a · Cited by 1,967
Gao, M.-R., Xu, Y.-F., Jiang, J., & Yu, S.-H. (2013) · Chemical Society Reviews · doi:10.1039/c2cs35310e · Cited by 1,610
Identification of individual and few layers of WS2 using Raman Spectroscopy
Berkdemir, A., Gutiérrez, H. R., Botello-Méndez, A. R., Perea-López, N., Elías, A. L., Chia, C.-I., Wang, B., Crespi, V. H., López-Urías, F., Charlier, J.-C., et al. (2013) · Scientific Reports · doi:10.1038/srep01755 · Cited by 1,599
Lu, Q., Yu, Y., Ma, Q., Chen, B., & Zhang, H. (2016) · Advanced Materials · doi:10.1002/adma.201503270 · Cited by 1,447
New Approaches for High Energy Density Lithium–Sulfur Battery Cathodes
Evers, S., & Nazar, L. F. (2013) · Accounts of Chemical Research · doi:10.1021/ar3001348 · Cited by 1,324
Sulfur Cathodes Based on Conductive MXene Nanosheets for High‐Performance Lithium–Sulfur Batteries
Liang, X., Garsuch, A., & Nazar, L. F. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201410174 · Cited by 1,201
Chen, Z., Cummins, D., Reinecke, B. N., Clark, E., Sunkara, M. K., & Jaramillo, T. F. (2011) · Nano Letters · doi:10.1021/nl2020476 · Cited by 1,153
Rechargeable Li2O2 Electrode for Lithium Batteries
Ogasawara, T., Débart, A., Holzapfel, M., Novák, P., & Bruce, P. G. (2006) · Journal of the American Chemical Society · doi:10.1021/ja056811q · Cited by 1,132
Three-dimensional bicontinuous ultrafast-charge and -discharge bulk battery electrodes
Zhang, H., Yu, X., & Braun, P. V. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2011.38 · Cited by 1,072
Understanding the Anchoring Effect of Two-Dimensional Layered Materials for Lithium–Sulfur Batteries
Zhang, Q., Wang, Y., Seh, Z. W., Fu, Z., Zhang, R., & Cui, Y. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b00367 · Cited by 931
Pure and stable metallic phase molybdenum disulfide nanosheets for hydrogen evolution reaction
Geng, X., Sun, W., Wu, W., Chen, B., Al-Hilo, A., Benamara, M., Zhu, H., Watanabe, F., Cui, J., & Chen, T.-P. (2016) · Nature Communications · doi:10.1038/ncomms10672 · Cited by 917
Stabilizing lithium–sulphur cathodes using polysulphide reservoirs
Ji, X., Evers, S., Black, R., & Nazar, L. F. (2011) · Nature Communications · doi:10.1038/ncomms1293 · Cited by 864
Electrocatalytic Polysulfide Traps for Controlling Redox Shuttle Process of Li–S Batteries
Al Salem, H., Babu, G., V. Rao, C., & Arava, L. M. R. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b04472 · Cited by 753
Self-citationHighly active hydrogen evolution catalysis from metallic WS 2 nanosheets
Lukowski, M. A., Daniel, A. S., English, C. R., Meng, F., Forticaux, A., Hamers, R. J., & Jin, S. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01329h · Cited by 709
Controlled Synthesis and Transfer of Large-Area WS2 Sheets: From Single Layer to Few Layers
Elías, A. L., Perea-López, N., Castro-Beltrán, A., Berkdemir, A., Lv, R., Feng, S., Long, A. D., Hayashi, T., Kim, Y. A., Endo, M., et al. (2013) · ACS Nano · doi:10.1021/nn400971k · Cited by 617
Cong, C., Shang, J., Wu, X., Cao, B., Peimyoo, N., Qiu, C., Sun, L., & Yu, T. (2014) · Advanced Optical Materials · doi:10.1002/adom.201300428 · Cited by 615
A Lithium/Dissolved Sulfur Battery with an Organic Electrolyte
Rauh, R. D., Abraham, K. M., Pearson, G. F., Surprenant, J. K., & Brummer, S. B. (1979) · Journal of The Electrochemical Society · doi:10.1149/1.2129079 · Cited by 592
Lithium Sulfur Battery: Oxidation/Reduction Mechanisms of Polysulfides in THF Solutions
Yamin, H., Gorenshtein, A., Penciner, J., Sternberg, Y., & Peled, E. (1988) · Journal of The Electrochemical Society · doi:10.1149/1.2095868 · Cited by 471
Large-Scale Production of Size-Controlled MoS2 Nanosheets by Shear Exfoliation
Varrla, E., Backes, C., Paton, K. R., Harvey, A., Gholamvand, Z., McCauley, J., & Coleman, J. N. (2015) · Chemistry of Materials · doi:10.1021/cm5044864 · Cited by 455
WS2 mode-locked ultrafast fiber laser
Mao, D., Wang, Y., Ma, C., Han, L., Jiang, B., Gan, X., Hua, S., Zhang, W., Mei, T., & Zhao, J. (2015) · Scientific Reports · doi:10.1038/srep07965 · Cited by 448
Wu, Z., Fang, B., Wang, Z., Wang, C., Liu, Z., Liu, F., Wang, W., Alfantazi, A., Wang, D., & Wilkinson, D. P. (2013) · ACS Catalysis · doi:10.1021/cs400384h · Cited by 382
Wang, H., Zhang, Q., Yao, H., Liang, Z., Lee, H.-W., Hsu, P.-C., Zheng, G., & Cui, Y. (2014) · Nano Letters · doi:10.1021/nl503730c · Cited by 312
Turbulence-assisted shear exfoliation of graphene using household detergent and a kitchen blender
Varrla, E., Paton, K. R., Backes, C., Harvey, A., Smith, R. J., McCauley, J., & Coleman, J. N. (2014) · Nanoscale · doi:10.1039/c4nr03560g · Cited by 297
Self-assembled 2D WSe2 thin films for photoelectrochemical hydrogen production
Yu, X., Prévot, M. S., Guijarro, N., & Sivula, K. (2015) · Nature Communications · doi:10.1038/ncomms8596 · Cited by 278
Polysulfide Flow Batteries Enabled by Percolating Nanoscale Conductor Networks
Fan, F. Y., Woodford, W. H., Li, Z., Baram, N., Smith, K. C., Helal, A., McKinley, G. H., Carter, W. C., & Chiang, Y.-M. (2014) · Nano Letters · doi:10.1021/nl500740t · Cited by 231
Babu, G., Ababtain, K., Ng, K. Y. S., & Arava, L. M. R. (2015) · Scientific Reports · doi:10.1038/srep08763 · Cited by 209
Self-citationIn Situ Detection of Active Edge Sites in Single-Layer MoS2 Catalysts
Bruix, A., Füchtbauer, H. G., Tuxen, A. K., Walton, A. S., Andersen, M., Porsgaard, S., Besenbacher, F., Hammer, B., & Lauritsen, J. V. (2015) · ACS Nano · doi:10.1021/acsnano.5b03199 · Cited by 192
Chen, J., Wu, X., Yin, L., Li, B., Hong, X., Fan, Z., Chen, B., Xue, C., & Zhang, H. (2015) · Angewandte Chemie · doi:10.1002/ange.201410172 · Cited by 176
Examining the Solid Electrolyte Interphase on Binder-Free Graphite Electrodes
Xiao, A., Yang, L., Lucht, B. L., Kang, S.-H., & Abraham, D. P. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3078020 · Cited by 164
Shifa, T. A., Wang, F., Cheng, Z., Zhan, X., Wang, Z., Liu, K., Safdar, M. M., Sun, L., & He, J. (2015) · Nanoscale · doi:10.1039/c5nr03704b · Cited by 90
Pu, Z., Liu, Q., Asiri, A. M., Obaid, A. Y., & Sun, X. (2014) · Electrochimica Acta · doi:10.1016/j.electacta.2014.04.092 · Cited by 69
Stephens, I. E. L., Ducati, C., & Fray, D. J. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.027306jes · Cited by 34
Cited by
Cai, Z., Liu, B., Zou, X., & Cheng, H.-M. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00536 · Cited by 1,495
Du, Z., Chen, X., Hu, W., Chuang, C., Xie, S., Hu, A., Yan, W., Kong, X., Wu, X., Ji, H., et al. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.8b12973 · Cited by 1,490
Liu, D., Zhang, C., Zhou, G., Lv, W., Ling, G., Zhi, L., & Yang, Q. (2018) · Advanced Science · doi:10.1002/advs.201700270 · Cited by 956
He, J., Hartmann, G., Lee, M., Hwang, G. S., Chen, Y., & Manthiram, A. (2019) · Energy & Environmental Science · doi:10.1039/c8ee03252a · Cited by 589
Lim, W., Kim, S., Jo, C., & Lee, J. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201902413 · Cited by 535
Metadata
- Authors
- Babu, G., Masurkar, N., Al Salem, H., & Arava, L. M. R.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-12-21
- Volume
- 139
- Issue
- 1
- Pages
- 171-178
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2560303891
- Cited by
- 386
- References
- 43
- FWCI
- 19.97
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.