The DOI matches its Crossref record; 50 of the 50 references it cites were found in a registry or an index.
Reshaping Lithium Plating/Stripping Behavior via Bifunctional Polymer Electrolyte for Room-Temperature Solid Li Metal Batteries
Abstract
High-energy rechargeable Li metal batteries are hindered by dendrite growth due to the use of a liquid electrolyte. Solid polymer electrolytes, as promising candidates to solve the above issue, are expected to own high Li ion conductivity without sacrificing mechanical strength, which is still a big challenge to realize. In this study, a bifunctional solid polymer electrolyte exactly having these two merits is proposed with an interpenetrating network of poly(ether–acrylate) (ipn-PEA) and realized via photopolymerization of ion-conductive poly(ethylene oxide) and branched acrylate. The ipn-PEA electrolyte with facile processing capability integrates high mechanical strength (ca. 12 GPa) with high room-temperature ionic conductance (0.22 mS cm –1 ), and significantly promotes uniform Li plating/stripping. Li metal full cells assembled with ipn-PEA electrolyte and cathodes within 4.5 V vs Li + /Li operate effectively at a rate of 5 C and cycle stably at a rate of 1 C at room temperature. Because of its fabrication simplicity and compelling characteristics, the bifunctional ipn-PEA electrolyte reshapes the feasibility of room-temperature solid-state Li metal batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
The Li-Ion Rechargeable Battery: A Perspective
Goodenough, J. B., & Park, K.-S. (2013) · Journal of the American Chemical Society · doi:10.1021/ja3091438 · Cited by 9,962
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
Electrolytes and Interphases in Li-Ion Batteries and Beyond
Xu, K. (2014) · Chemical Reviews · doi:10.1021/cr500003w · Cited by 5,566
Promise and reality of post-lithium-ion batteries with high energy densities
Choi, J. W., & Aurbach, D. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.13 · Cited by 5,110
A lithium superionic conductor
Kamaya, N., Homma, K., Yamakawa, Y., Hirayama, M., Kanno, R., Yonemura, M., Kamiyama, T., Kato, Y., Hama, S., Kawamoto, K., et al. (2011) · Nature Materials · doi:10.1038/nmat3066 · Cited by 4,978
Lithium metal anodes for rechargeable batteries
Xu, W., Wang, J., Ding, F., Chen, X., Nasybulin, E., Zhang, Y., & Zhang, J.-G. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee40795k · Cited by 4,704
High-power all-solid-state batteries using sulfide superionic conductors
Kato, Y., Hori, S., Saito, T., Suzuki, K., Hirayama, M., Mitsui, A., Yonemura, M., Iba, H., & Kanno, R. (2016) · Nature Energy · doi:10.1038/nenergy.2016.30 · Cited by 3,517
Nanocomposite polymer electrolytes for lithium batteries
Croce, F., Appetecchi, G. B., Persi, L., & Scrosati, B. (1998) · Nature · doi:10.1038/28818 · Cited by 3,205
Lithium–Sulfur Batteries: Electrochemistry, Materials, and Prospects
Yin, Y., Xin, S., Guo, Y., & Wan, L. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201304762 · Cited by 2,707
Self-citationHigh rate and stable cycling of lithium metal anode
Qian, J., Henderson, W. A., Xu, W., Bhattacharya, P., Engelhard, M., Borodin, O., & Zhang, J.-G. (2015) · Nature Communications · doi:10.1038/ncomms7362 · Cited by 2,561
Bachman, J. C., Muy, S., Grimaud, A., Chang, H.-H., Pour, N., Lux, S. F., Paschos, O., Maglia, F., Lupart, S., Lamp, P., et al. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00563 · Cited by 2,537
Dendrite-Free Lithium Deposition via Self-Healing Electrostatic Shield Mechanism
Ding, F., Xu, W., Graff, G. L., Zhang, J., Sushko, M. L., Chen, X., Shao, Y., Engelhard, M. H., Nie, Z., Xiao, J., et al. (2013) · Journal of the American Chemical Society · doi:10.1021/ja312241y · Cited by 2,107
Interconnected hollow carbon nanospheres for stable lithium metal anodes
Zheng, G., Lee, S. W., Liang, Z., Lee, H.-W., Yan, K., Yao, H., Wang, H., Li, W., Chu, S., & Cui, Y. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.152 · Cited by 1,764
Aurbach, D. (2002) · Solid State Ionics · doi:10.1016/s0167-2738(02)00080-2 · Cited by 1,697
Stable lithium electrodeposition in liquid and nanoporous solid electrolytes
Lu, Y., Tu, Z., & Archer, L. A. (2014) · Nature Materials · doi:10.1038/nmat4041 · Cited by 1,592
Yang, C.-P., Yin, Y.-X., Zhang, S.-F., Li, N.-W., & Guo, Y.-G. (2015) · Nature Communications · doi:10.1038/ncomms9058 · Cited by 1,589
Self-citationAn Artificial Solid Electrolyte Interphase Layer for Stable Lithium Metal Anodes
Li, N., Yin, Y., Yang, C., & Guo, Y. (2016) · Advanced Materials · doi:10.1002/adma.201504526 · Cited by 1,577
Self-citationSingle-ion BAB triblock copolymers as highly efficient electrolytes for lithium-metal batteries
Bouchet, R., Maria, S., Meziane, R., Aboulaich, A., Lienafa, L., Bonnet, J.-P., Phan, T. N. T., Bertin, D., Gigmes, D., Devaux, D., et al. (2013) · Nature Materials · doi:10.1038/nmat3602 · Cited by 1,425
Electrochemical aspects of the generation of ramified metallic electrodeposits
Chazalviel, J.-N. (1990) · Physical Review A · doi:10.1103/physreva.42.7355 · Cited by 1,402
Seino, Y., Ota, T., Takada, K., Hayashi, A., & Tatsumisago, M. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee41655k · Cited by 1,302
Superconcentrated electrolytes for a high-voltage lithium-ion battery
Wang, J., Yamada, Y., Sodeyama, K., Chiang, C. H., Tateyama, Y., & Yamada, A. (2016) · Nature Communications · doi:10.1038/ncomms12032 · Cited by 1,059
Metallic anodes for next generation secondary batteries
Kim, H., Jeong, G., Kim, Y.-U., Kim, J.-H., Park, C.-M., & Sohn, H.-J. (2013) · Chemical Society Reviews · doi:10.1039/c3cs60177c · Cited by 1,010
Plating a Dendrite-Free Lithium Anode with a Polymer/Ceramic/Polymer Sandwich Electrolyte
Zhou, W., Wang, S., Li, Y., Xin, S., Manthiram, A., & Goodenough, J. B. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b05341 · Cited by 1,006
Cheng, X., Hou, T., Zhang, R., Peng, H., Zhao, C., Huang, J., & Zhang, Q. (2016) · Advanced Materials · doi:10.1002/adma.201506124 · Cited by 994
Thermodynamic analysis on energy densities of batteries
Zu, C.-X., & Li, H. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00777c · Cited by 911
Khurana, R., Schaefer, J. L., Archer, L. A., & Coates, G. W. (2014) · Journal of the American Chemical Society · doi:10.1021/ja502133j · Cited by 880
Detection of subsurface structures underneath dendrites formed on cycled lithium metal electrodes
Harry, K. J., Hallinan, D. T., Parkinson, D. Y., MacDowell, A. A., & Balsara, N. P. (2014) · Nature Materials · doi:10.1038/nmat3793 · Cited by 868
Next-Generation Lithium Metal Anode Engineering via Atomic Layer Deposition
Kozen, A. C., Lin, C.-F., Pearse, A. J., Schroeder, M. A., Han, X., Hu, L., Lee, S.-B., Rubloff, G. W., & Noked, M. (2015) · ACS Nano · doi:10.1021/acsnano.5b02166 · Cited by 816
In situ NMR observation of the formation of metallic lithium microstructures in lithium batteries
Bhattacharyya, R., Key, B., Chen, H., Best, A. S., Hollenkamp, A. F., & Grey, C. P. (2010) · Nature Materials · doi:10.1038/nmat2764 · Cited by 813
Dendrite Growth in Lithium/Polymer Systems
Monroe, C., & Newman, J. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1606686 · Cited by 800
Solid Electrolyte: the Key for High‐Voltage Lithium Batteries
Li, J., Ma, C., Chi, M., Liang, C., & Dudney, N. J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401408 · Cited by 721
Zhang, J., Zhao, J., Yue, L., Wang, Q., Chai, J., Liu, Z., Zhou, X., Li, H., Guo, Y., Cui, G., et al. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201501082 · Cited by 636
Self-citationSingle Lithium‐Ion Conducting Polymer Electrolytes Based on a Super‐Delocalized Polyanion
Ma, Q., Zhang, H., Zhou, C., et al. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201509299 · Cited by 485
Stone, G. M., Mullin, S. A., Teran, A. A., Hallinan, D. T., Minor, A. M., Hexemer, A., & Balsara, N. P. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.030203jes · Cited by 438
Zhu, Z., Hong, M., Guo, D., Shi, J., Tao, Z., & Chen, J. (2014) · Journal of the American Chemical Society · doi:10.1021/ja507852t · Cited by 437
Ryou, M., Lee, Y. M., Lee, Y., Winter, M., & Bieker, P. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201402953 · Cited by 412
Zhou, D., Liu, R., He, Y., Li, F., Liu, M., Li, B., Yang, Q., Cai, Q., & Kang, F. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502214 · Cited by 408
Fast and reversible thermoresponsive polymer switching materials for safer batteries
Chen, Z., Hsu, P.-C., Lopez, J., Li, Y., To, J. W. F., Liu, N., Wang, C., Andrews, S. C., Liu, J., Cui, Y., et al. (2016) · Nature Energy · doi:10.1038/nenergy.2015.9 · Cited by 360
A Thermally Conductive Separator for Stable Li Metal Anodes
Luo, W., Zhou, L., Fu, K., Yang, Z., Wan, J., Manno, M., Yao, Y., Zhu, H., Yang, B., & Hu, L. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b02432 · Cited by 356
An Iodide-Based Li7P2S8I Superionic Conductor
Rangasamy, E., Liu, Z., Gobet, M., Pilar, K., Sahu, G., Zhou, W., Wu, H., Greenbaum, S., & Liang, C. (2015) · Journal of the American Chemical Society · doi:10.1021/ja508723m · Cited by 350
Hybrid Electrolytes with Controlled Network Structures for Lithium Metal Batteries
Pan, Q., Smith, D. M., Qi, H., Wang, S., & Li, C. Y. (2015) · Advanced Materials · doi:10.1002/adma.201502059 · Cited by 345
A dendrite-suppressing composite ion conductor from aramid nanofibres
Tung, S.-O., Ho, S., Yang, M., Zhang, R., & Kotov, N. A. (2015) · Nature Communications · doi:10.1038/ncomms7152 · Cited by 336
Solution‐Processable Glass LiI‐Li4SnS4 Superionic Conductors for All‐Solid‐State Li‐Ion Batteries
Park, K. H., Oh, D. Y., Choi, Y. E., Nam, Y. J., Han, L., Kim, J., Xin, H. L., Lin, F., Oh, S. M., & Jung, Y. S. (2015) · Advanced Materials · doi:10.1002/adma.201505008 · Cited by 321
Guyomard, D., & Tarascon, J. M. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2220987 · Cited by 235
Kil, E., Choi, K., Ha, H., Xu, S. H., Rogers, J. A., Kim, M. R., Lee, Y.-G., Kim, K. M., Cho, K. Y., & Lee, S. (2012) · Advanced Materials · doi:10.1002/adma.201204182 · Cited by 218
Seki, S., Kobayashi, Y., Miyashiro, H., et al. (2005) · Chemistry of Materials · doi:10.1021/cm047846c · Cited by 153
Flexible Ion‐Conducting Composite Membranes for Lithium Batteries
Aetukuri, N. P. B., Kitajima, S., Jung, E., Thompson, L. E., Virwani, K. R., Reich, M., Kunze, M., Schneider, M., Schmidbauer, W., Wilcke, W. W., et al. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500265 · Cited by 123
Wetjen, M., Kim, G., Joost, M., Appetecchi, G. B., Winter, M., & Passerini, S. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.08.037 · Cited by 113
Solid-state batteries enter EV fray
Robinson, A. L., & Janek, J. (2014) · MRS Bulletin · doi:10.1557/mrs.2014.285 · Cited by 107
Cited by
Designing solid-state electrolytes for safe, energy-dense batteries
Zhao, Q., Stalin, S., Zhao, C.-Z., & Archer, L. A. (2020) · Nature Reviews Materials · doi:10.1038/s41578-019-0165-5 · Cited by 2,372
Polymer Electrolytes for Lithium-Based Batteries: Advances and Prospects
Zhou, D., Shanmukaraj, D., Tkacheva, A., Armand, M., & Wang, G. (2019) · Chem · doi:10.1016/j.chempr.2019.05.009 · Cited by 1,539
Zhang, R., Chen, X., Chen, X., Cheng, X., Zhang, X., Yan, C., & Zhang, Q. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201702099 · Cited by 1,225
Reviving Lithium‐Metal Anodes for Next‐Generation High‐Energy Batteries
Guo, Y., Li, H., & Zhai, T. (2017) · Advanced Materials · doi:10.1002/adma.201700007 · Cited by 1,215
Self-citationAn anion-immobilized composite electrolyte for dendrite-free lithium metal anodes
Zhao, C.-Z., Zhang, X.-Q., Cheng, X.-B., Zhang, R., Xu, R., Chen, P.-Y., Peng, H.-J., Huang, J.-Q., & Zhang, Q. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1708489114 · Cited by 849
Metadata
- Authors
- Zeng, X.-X., Yin, Y.-X., Li, N.-W., Du, W.-C., Guo, Y.-G., & Wan, L.-J.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-12-06
- Volume
- 138
- Issue
- 49
- Pages
- 15825-15828
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2559131443
- Cited by
- 459
- References
- 50
- FWCI
- 28.36
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.