The DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.
Nucleation and Growth Mechanism of Lithium Metal Electroplating
Abstract
Understanding the mechanism of Li nucleation and growth is essential for providing long cycle life and safe lithium ion batteries or lithium metal batteries. However, no quantitative report on Li metal deposition is available, to the best of our knowledge. We propose a model for quantitatively understanding the Li nucleation and growth mechanism associated with the solid–electrolyte interphase (SEI) formation, which we name the Li-SEI model. The current transients at various overpotentials initiate the nucleation and growth of Li metal on bare Cu foil. The Li-SEI model considering a three-dimensional diffusion-controlled instantaneous process ( J 3D-DC ) with the simultaneous reduction of electrolyte decomposition ( J SEI ) due to the SEI fracture is employed for investigating the Li nucleation and growth mechanism. The individual contributions of experimental and theoretical transient states, i.e., the fundamental kinetic values of diffusion coefficient ( D ), rate of nucleation ( N 0 ), and rate constant of electrolyte decomposition ( k SEI ), can be determined from the Li-SEI model. Interestingly, J SEI increases with time, indicating that the current contributing from the electrolyte decomposition increases with time due to the SEI fracture upon Li deposition. Meanwhile, the k SEI increases with overpotential, indicating the SEI fracture is more serious at higher overpotential or higher growth rate. The k SEI is smaller in the electrolyte with fluoroethylene carbonate (FEC) additive, indicating that FEC additive can significantly suppress the SEI fracture during Li metal deposition. This proposed model opens a new way to quantitatively understand the Li nucleation and growth mechanism and electrolyte decomposition on various substrates or in different electrolytes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Cheng, X.-B., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00115 · Cited by 6,197
Lithium metal anodes for rechargeable batteries
Xu, W., Wang, J., Ding, F., Chen, X., Nasybulin, E., Zhang, Y., & Zhang, J.-G. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee40795k · Cited by 4,704
High rate and stable cycling of lithium metal anode
Qian, J., Henderson, W. A., Xu, W., Bhattacharya, P., Engelhard, M., Borodin, O., & Zhang, J.-G. (2015) · Nature Communications · doi:10.1038/ncomms7362 · Cited by 2,561
Aurbach, D. (2000) · Journal of Power Sources · doi:10.1016/s0378-7753(00)00431-6 · Cited by 2,130
Selective deposition and stable encapsulation of lithium through heterogeneous seeded growth
Yan, K., Lu, Z., Lee, H.-W., Xiong, F., Hsu, P.-C., Li, Y., Zhao, J., Chu, S., & Cui, Y. (2016) · Nature Energy · doi:10.1038/nenergy.2016.10 · Cited by 2,116
Dendrite-Free Lithium Deposition via Self-Healing Electrostatic Shield Mechanism
Ding, F., Xu, W., Graff, G. L., Zhang, J., Sushko, M. L., Chen, X., Shao, Y., Engelhard, M. H., Nie, Z., Xiao, J., et al. (2013) · Journal of the American Chemical Society · doi:10.1021/ja312241y · Cited by 2,107
Interconnected hollow carbon nanospheres for stable lithium metal anodes
Zheng, G., Lee, S. W., Liang, Z., Lee, H.-W., Yan, K., Yao, H., Wang, H., Li, W., Chu, S., & Cui, Y. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.152 · Cited by 1,764
Nanoscale Nucleation and Growth of Electrodeposited Lithium Metal
Pei, A., Zheng, G., Shi, F., Li, Y., & Cui, Y. (2017) · Nano Letters · doi:10.1021/acs.nanolett.6b04755 · Cited by 1,726
Transition of lithium growth mechanisms in liquid electrolytes
Bai, P., Li, J., Brushett, F. R., & Bazant, M. Z. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01674j · Cited by 1,591
Yang, C.-P., Yin, Y.-X., Zhang, S.-F., Li, N.-W., & Guo, Y.-G. (2015) · Nature Communications · doi:10.1038/ncomms9058 · Cited by 1,589
Plating a Dendrite-Free Lithium Anode with a Polymer/Ceramic/Polymer Sandwich Electrolyte
Zhou, W., Wang, S., Li, Y., Xin, S., Manthiram, A., & Goodenough, J. B. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b05341 · Cited by 1,006
Electrolyte additives for lithium ion battery electrodes: progress and perspectives
Haregewoin, A. M., Wotango, A. S., & Hwang, B.-J. (2016) · Energy Environ. Sci. · doi:10.1039/c6ee00123h · Cited by 907
Self-citationLithium-coated polymeric matrix as a minimum volume-change and dendrite-free lithium metal anode
Liu, Y., Lin, D., Liang, Z., Zhao, J., Yan, K., & Cui, Y. (2016) · Nature Communications · doi:10.1038/ncomms10992 · Cited by 902
Next-Generation Lithium Metal Anode Engineering via Atomic Layer Deposition
Kozen, A. C., Lin, C.-F., Pearse, A. J., Schroeder, M. A., Han, X., Hu, L., Lee, S.-B., Rubloff, G. W., & Noked, M. (2015) · ACS Nano · doi:10.1021/acsnano.5b02166 · Cited by 816
Electrochemical in situ investigations of SEI and dendrite formation on the lithium metal anode
Bieker, G., Winter, M., & Bieker, P. (2015) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp05865h · Cited by 777
Dendrite short-circuit and fuse effect on Li/polymer/Li cells
Rosso, M., Brissot, C., Teyssot, A., Dollé, M., Sannier, L., Tarascon, J.-M., Bouchet, R., & Lascaud, S. (2006) · Electrochimica Acta · doi:10.1016/j.electacta.2006.02.004 · Cited by 589
Lithium Metal Anodes with an Adaptive “Solid-Liquid” Interfacial Protective Layer
Liu, K., Pei, A., Lee, H. R., Kong, B., Liu, N., Lin, D., Liu, Y., Liu, C., Hsu, P.-C., Bao, Z., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.6b13314 · Cited by 560
How Solid-Electrolyte Interphase Forms in Aqueous Electrolytes
Suo, L., Oh, D., Lin, Y., Zhuo, Z., Borodin, O., Gao, T., Wang, F., Kushima, A., Wang, Z., Kim, H.-C., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b10688 · Cited by 529
Wang, X., Zeng, W., Hong, L., Xu, W., Yang, H., Wang, F., Duan, H., Tang, M., & Jiang, H. (2018) · Nature Energy · doi:10.1038/s41560-018-0104-5 · Cited by 499
In situ analytical techniques for battery interface analysis
Tripathi, A. M., Su, W.-N., & Hwang, B. J. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00180k · Cited by 488
Self-citationZeng, X.-X., Yin, Y.-X., Li, N.-W., Du, W.-C., Guo, Y.-G., & Wan, L.-J. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b10088 · Cited by 459
Stabilizing Lithium Metal Anodes by Uniform Li-Ion Flux Distribution in Nanochannel Confinement
Liu, W., Lin, D., Pei, A., & Cui, Y. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b08730 · Cited by 455
Ye, H., Xin, S., Yin, Y.-X., Li, J.-Y., Guo, Y.-G., & Wan, L.-J. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b01763 · Cited by 451
Hollow Carbon-Nanotube/Carbon-Nanofiber Hybrid Anodes for Li-Ion Batteries
Chen, Y., Li, X., Park, K., Song, J., Hong, J., Zhou, L., Mai, Y.-W., Huang, H., & Goodenough, J. B. (2013) · Journal of the American Chemical Society · doi:10.1021/ja408421n · Cited by 444
Zhou, D., Liu, R., He, Y., Li, F., Liu, M., Li, B., Yang, Q., Cai, Q., & Kang, F. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502214 · Cited by 408
Steiger, J., Kramer, D., & Mönig, R. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.03.029 · Cited by 363
Dawson, J. A., Canepa, P., Famprikis, T., Masquelier, C., & Islam, M. S. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b10593 · Cited by 347
Mehdi, B. L., Qian, J., Nasybulin, E., Park, C., Welch, D. A., Faller, R., Mehta, H., Henderson, W. A., Xu, W., Wang, C. M., et al. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b00175 · Cited by 325
Assegie, A. A., Cheng, J.-H., Kuo, L.-M., Su, W.-N., & Hwang, B.-J. (2018) · Nanoscale · doi:10.1039/c7nr09058g · Cited by 309
Self-citationLuo, Z., Lu, Y., Singer, D. W., Berck, M. E., Somers, L. A., Goldsmith, B. R., & Johnson, A. T. C. (2011) · Chemistry of Materials · doi:10.1021/cm1028854 · Cited by 297
Gao, Y., Zhao, Y., Li, Y. C., Huang, Q., Mallouk, T. E., & Wang, D. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b06437 · Cited by 297
Nucleation and diffusion-controlled growth of electroactive centers
Palomar-Pardave, M. E., Scharifker, B. R., Arce, E. M., & Romero-Romo, M. (2005) · Electrochimica Acta · doi:10.1016/j.electacta.2005.03.004 · Cited by 296
Li, N., Yin, Y., Li, J., Zhang, C., & Guo, Y. (2017) · Advanced Science · doi:10.1002/advs.201600400 · Cited by 273
Silicon Nanowire Fabric as a Lithium Ion Battery Electrode Material
Chockla, A. M., Harris, J. T., Akhavan, V. A., Bogart, T. D., Holmberg, V. C., Steinhagen, C., Mullins, C. B., Stevenson, K. J., & Korgel, B. A. (2011) · Journal of the American Chemical Society · doi:10.1021/ja208232h · Cited by 271
Phase-Field Simulations of Lithium Dendrite Growth with Open-Source Software
Hong, Z., & Viswanathan, V. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b01009 · Cited by 201
Kim, J.-S., Kim, D. W., Jung, H. T., & Choi, J. W. (2015) · Chemistry of Materials · doi:10.1021/cm503447u · Cited by 199
Gao, Y., Yi, R., Li, Y., Song, J., Chen, S., Huang, Q., Mallouk, T. E., & Wang, D. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b07584 · Cited by 139
Dudin, P. V., Unwin, P. R., & Macpherson, J. V. (2010) · The Journal of Physical Chemistry C · doi:10.1021/jp1043706 · Cited by 87
Aldana-González, J., Romero-Romo, M., Robles-Peralta, J., Morales-Gil, P., Palacios, E., Ramírez-Silva, M. T., Mostany, J. L., & Palomar-Pardave, M. E. (2018) · Electrochimica Acta · doi:10.1016/j.electacta.2018.04.192 · Cited by 74
Cited by
Toward Critical Electrode/Electrolyte Interfaces in Rechargeable Batteries
Yan, C., Xu, R., Xiao, Y., Ding, J., Xu, L., Li, B., & Huang, J. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201909887 · Cited by 510
Review on Li Deposition in Working Batteries: From Nucleation to Early Growth
Chen, X., Zhao, B., Yan, C., & Zhang, Q. (2021) · Advanced Materials · doi:10.1002/adma.202004128 · Cited by 456
Gel polymer electrolytes for rechargeable batteries toward wide-temperature applications
Zhou, X., Zhou, Y., Yu, L., Qi, L., Oh, K.-S., Hu, P., Lee, S.-Y., & Chen, C. (2024) · Chemical Society Reviews · doi:10.1039/d3cs00551h · Cited by 333
Decoupling the origins of irreversible coulombic efficiency in anode-free lithium metal batteries
Huang, C.-J., Thirumalraj, B., Tao, H.-C., Shitaw, K. N., Sutiono, H., Hagos, T. T., Beyene, T. T., Kuo, L.-M., Wang, C.-C., Wu, S.-H., et al. (2021) · Nature Communications · doi:10.1038/s41467-021-21683-6 · Cited by 287
Self-citationHeubner, C., Maletti, S., Auer, H., Hüttl, J., Voigt, K., Lohrberg, O., Nikolowski, K., Partsch, M., & Michaelis, A. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202106608 · Cited by 277
Metadata
- Authors
- Thirumalraj, B., Hagos, T. T., Huang, C.-J., Teshager, M. A., Cheng, J.-H., Su, W.-N., & Hwang, B.-J.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-10-23
- Volume
- 141
- Issue
- 46
- Pages
- 18612-18623
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2981445017
- Cited by
- 273
- References
- 41
- FWCI
- 8.19
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.