The DOI matches its Crossref record; 39 of the 39 references it cites were found in a registry or an index.
High Interfacial-Energy Interphase Promoting Safe Lithium Metal Batteries
Abstract
Engineering a stable solid electrolyte interphase (SEI) is critical for suppression of lithium dendrites. However, the formation of a desired SEI by formulating electrolyte composition is very difficult due to complex electrochemical reduction reactions. Here, instead of trial-and-error of electrolyte composition, we design a Li-11 wt % Sr alloy anode to form a SrF 2 -rich SEI in fluorinated electrolytes. Density functional theory (DFT) calculation and experimental characterization demonstrate that a SrF 2 -rich SEI has a large interfacial energy with Li metal and a high mechanical strength, which can effectively suppress the Li dendrite growth by simultaneously promoting the lateral growth of deposited Li metal and the SEI stability. The Li–Sr/Cu cells in 2 M LiFSI-DME show an outstanding Li plating/stripping Coulombic efficiency of 99.42% at 1 mA cm –2 with a capacity of 1 mAh cm –2 and 98.95% at 3 mA cm –2 with a capacity of 2 mAh cm –2, respectively. The symmetric Li–Sr/Li–Sr cells also achieve a stable electrochemical performance of 180 cycles at an extremely high current density of 30 mA cm –2 with a capacity of 1 mAh cm –2 . When paired with LiFePO 4 (LFP) and LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NCM811) cathodes, Li–Sr/LFP cells in 2 M LiFSI-DME electrolytes and Li–Sr/NMC811 cells in 1 M LiPF 6 in FEC:FEMC:HFE electrolytes also maintain excellent capacity retention. Designing SEIs by regulating Li-metal anode composition opens up a new and rational avenue to suppress Li dendrites.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Cheng, X.-B., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00115 · Cited by 6,197
High rate and stable cycling of lithium metal anode
Qian, J., Henderson, W. A., Xu, W., Bhattacharya, P., Engelhard, M., Borodin, O., & Zhang, J.-G. (2015) · Nature Communications · doi:10.1038/ncomms7362 · Cited by 2,561
Review—SEI: Past, Present and Future
Peled, E., & Menkin, S. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.1441707jes · Cited by 2,182
Albertus, P., Babinec, S., Litzelman, S., & Newman, A. (2017) · Nature Energy · doi:10.1038/s41560-017-0047-2 · Cited by 1,888
More Reliable Lithium‐Sulfur Batteries: Status, Solutions and Prospects
Fang, R., Zhao, S., Sun, Z., Wang, D., Cheng, H., & Li, F. (2017) · Advanced Materials · doi:10.1002/adma.201606823 · Cited by 1,785
Fluoroethylene Carbonate Additives to Render Uniform Li Deposits in Lithium Metal Batteries
Zhang, X., Cheng, X., Chen, X., Yan, C., & Zhang, Q. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201605989 · Cited by 1,699
High electronic conductivity as the origin of lithium dendrite formation within solid electrolytes
Han, F., Westover, A. S., Yue, J., Fan, X., Wang, F., Chi, M., Leonard, D. N., Dudney, N. J., Wang, H., & Wang, C. (2019) · Nature Energy · doi:10.1038/s41560-018-0312-z · Cited by 1,695
Self-citationStable lithium electrodeposition in liquid and nanoporous solid electrolytes
Lu, Y., Tu, Z., & Archer, L. A. (2014) · Nature Materials · doi:10.1038/nmat4041 · Cited by 1,592
Transition of lithium growth mechanisms in liquid electrolytes
Bai, P., Li, J., Brushett, F. R., & Bazant, M. Z. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01674j · Cited by 1,591
Self-citationAtomic structure of sensitive battery materials and interfaces revealed by cryo–electron microscopy
Li, Y., Li, Y., Pei, A., Yan, K., Sun, Y., Wu, C.-L., Joubert, L.-M., Chin, R., Koh, A. L., Yu, Y., et al. (2017) · Science · doi:10.1126/science.aam6014 · Cited by 1,547
The synergetic effect of lithium polysulfide and lithium nitrate to prevent lithium dendrite growth
Li, W., Yao, H., Yan, K., Zheng, G., Liang, Z., Chiang, Y.-M., & Cui, Y. (2015) · Nature Communications · doi:10.1038/ncomms8436 · Cited by 1,540
Accurate Determination of Coulombic Efficiency for Lithium Metal Anodes and Lithium Metal Batteries
Adams, B. D., Zheng, J., Ren, X., Xu, W., & Zhang, J. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702097 · Cited by 1,499
Non-flammable electrolyte enables Li-metal batteries with aggressive cathode chemistries
Fan, X., Chen, L., Borodin, O., Ji, X., Chen, J., Hou, S., Deng, T., Zheng, J., Yang, C., Liou, S.-C., et al. (2018) · Nature Nanotechnology · doi:10.1038/s41565-018-0183-2 · Cited by 1,371
Self-citationHighly Fluorinated Interphases Enable High-Voltage Li-Metal Batteries
Fan, X., Chen, L., Ji, X., Deng, T., Hou, S., Chen, J., Zheng, J., Wang, F., Jiang, J., Xu, K., et al. (2018) · Chem · doi:10.1016/j.chempr.2017.10.017 · Cited by 961
Self-citationDetection of subsurface structures underneath dendrites formed on cycled lithium metal electrodes
Harry, K. J., Hallinan, D. T., Parkinson, D. Y., MacDowell, A. A., & Balsara, N. P. (2014) · Nature Materials · doi:10.1038/nmat3793 · Cited by 868
Fluorinated solid electrolyte interphase enables highly reversible solid-state Li metal battery
Fan, X., Ji, X., Han, F., Yue, J., Chen, J., Chen, L., Deng, T., Jiang, J., & Wang, C. (2018) · Science Advances · doi:10.1126/sciadv.aau9245 · Cited by 838
Self-citationYan, K., Lee, H.-W., Gao, T., Zheng, G., Yao, H., Wang, H., Lu, Z., Zhou, Y., Liang, Z., Liu, Z., et al. (2014) · Nano Letters · doi:10.1021/nl503125u · Cited by 742
Fluorine-donating electrolytes enable highly reversible 5-V-class Li metal batteries
Suo, L., Xue, W., Gobet, M., Greenbaum, S. G., Wang, C., Chen, Y., Yang, W., Li, Y., & Li, J. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1712895115 · Cited by 679
Self-citationElectrode–electrolyte interfaces in lithium-based batteries
Yu, X., & Manthiram, A. (2018) · Energy & Environmental Science · doi:10.1039/c7ee02555f · Cited by 649
Surface Fluorination of Reactive Battery Anode Materials for Enhanced Stability
Zhao, J., Liao, L., Shi, F., Lei, T., Chen, G., Pei, A., Sun, J., Yan, K., Zhou, G., Xie, J., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b05251 · Cited by 514
Improved cycling performances of lithium sulfur batteries with LiNO3-modified electrolyte
Liang, X. M., Wen, Z., Liu, Y., Wu, M., Jin, J. H., Zhang, H., & Wu, X. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.08.027 · Cited by 506
Dendrite-Free Li-Metal Battery Enabled by a Thin Asymmetric Solid Electrolyte with Engineered Layers
Duan, H., Yin, Y.-X., Shi, Y., Wang, P.-F., Zhang, X.-D., Yang, C.-P., Shi, J.-L., Wen, R., Guo, Y.-G., & Wan, L.-J. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.7b10864 · Cited by 482
Self-citationZeng, X.-X., Yin, Y.-X., Li, N.-W., Du, W.-C., Guo, Y.-G., & Wan, L.-J. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b10088 · Cited by 459
Wang, X., Zhang, M., Alvarado, J., Wang, S., Sina, M., Lu, B., Bouwer, J., Xu, W., Xiao, J., Zhang, J.-G., et al. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b03606 · Cited by 409
Steiger, J., Kramer, D., & Mönig, R. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.03.029 · Cited by 363
Interface engineering of sulfide electrolytes for all-solid-state lithium batteries
Xu, R., Han, F., Ji, X., Fan, X., Tu, J., & Wang, C. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.09.061 · Cited by 329
Self-citationHigh-Performance Lithium Metal Negative Electrode with a Soft and Flowable Polymer Coating
Zheng, G., Wang, C., Pei, A., Lopez, J., Shi, F., Chen, Z., Sendek, A. D., Lee, H.-W., Lu, Z., Schneider, H., et al. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00456 · Cited by 328
Self-citationMa, J.-L., Meng, F.-L., Yu, Y., Liu, D.-P., Yan, J.-M., Zhang, Y., Zhang, X.-B., & Jiang, Q. (2019) · Nature Chemistry · doi:10.1038/s41557-018-0166-9 · Cited by 327
Fast galvanic lithium corrosion involving a Kirkendall-type mechanism
Lin, D., Liu, Y., Li, Y., Li, Y., Pei, A., Xie, J., Huang, W., & Cui, Y. (2019) · Nature Chemistry · doi:10.1038/s41557-018-0203-8 · Cited by 318
Chang, H. J., Ilott, A. J., Trease, N. M., Mohammadi, M., Jerschow, A., & Grey, C. P. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b09385 · Cited by 285
Liquid K–Na Alloy Anode Enables Dendrite‐Free Potassium Batteries
Xue, L., Gao, H., Zhou, W., Xin, S., Park, K., Li, Y., & Goodenough, J. B. (2016) · Advanced Materials · doi:10.1002/adma.201602633 · Cited by 269
Wandt, J., Marino, C., Gasteiger, H. A., Jakes, P., Eichel, R.-A., & Granwehr, J. (2015) · Energy & Environmental Science · doi:10.1039/c4ee02730b · Cited by 194
Perspective—Fluorinating Interphases
Wang, C., Meng, Y. S., & Xu, K. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.0281903jes · Cited by 173
Self-citationElectrochemical Interphases for High-Energy Storage Using Reactive Metal Anodes
Wei, S., Choudhury, S., Tu, Z., Zhang, K., & Archer, L. A. (2018) · Accounts of Chemical Research · doi:10.1021/acs.accounts.7b00484 · Cited by 173
Artificial solid electrolyte interphase for aqueous lithium energy storage systems
Zhi, J., Yazdi, A. Z., Valappil, G., Haime, J., & Chen, P. (2017) · Science Advances · doi:10.1126/sciadv.1701010 · Cited by 105
Li, X., Liu, Y., Pan, Y., Wang, M., Chen, J., Xu, H., Huang, Y., Lau, W., Shan, A., Zheng, J., et al. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta06908a · Cited by 59
Self-citationRecent development in lithium metal anodes of liquid-state rechargeable batteries
Liu, S., Wang, X., Xie, D., Xia, X. H., Gu, C., Wu, J., & Tu, J. P. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.09.204 · Cited by 56
Self-citationZhang, Y., Bai, W.-Q., Wang, X.-L., Xia, X., Gu, C., & Tu, J. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta06612g · Cited by 46
Self-citation
Cited by
Lithium Metal Anodes with Nonaqueous Electrolytes
Zhang, J.-G., Xu, W., Xiao, J., Cao, X., & Liu, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00275 · Cited by 730
An artificial hybrid interphase for an ultrahigh-rate and practical lithium metal anode
Hu, A., Chen, W., Du, X., Hu, Y., Lei, T., Wang, H., Xue, L., Li, Y., Sun, H., Yan, Y., et al. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00508a · Cited by 716
Liu, S., Ji, X., Piao, N., Chen, J., Eidson, N., Xu, J., Wang, P., Chen, L., Zhang, J., Deng, T., et al. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202012005 · Cited by 610
Self-citationLiquid electrolyte: The nexus of practical lithium metal batteries
Wang, H., Yu, Z., Kong, X., Kim, S. C., Boyle, D. T., Qin, J., Bao, Z., & Cui, Y. (2022) · Joule · doi:10.1016/j.joule.2021.12.018 · Cited by 596
Confronting the Challenges in Lithium Anodes for Lithium Metal Batteries
Wang, Q., Liu, B., Shen, Y., Wu, J., Zhao, Z., Zhong, C., & Hu, W. (2021) · Advanced Science · doi:10.1002/advs.202101111 · Cited by 531
Metadata
- Authors
- Liu, S., Ji, X., Yue, J., Hou, S., Wang, P., Cui, C., Chen, J., Shao, B., Li, J., Han, F., Tu, J., & Wang, C.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-01-13
- Volume
- 142
- Issue
- 5
- Pages
- 2438-2447
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W3000577819
- Cited by
- 318
- References
- 39
- FWCI
- 15.02
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.