The DOI matches its Crossref record; 84 of the 84 references it cites were found in a registry or an index.
Switchable Catalysis Improves the Properties of CO2-Derived Polymers: Poly(cyclohexene carbonate-b-ε-decalactone-b-cyclohexene carbonate) Adhesives, Elastomers, and Toughened Plastics
Open accessAbstract
Abstract Carbon dioxide/epoxide copolymerization is an efficient way to add value to waste CO2 and to reduce pollution in polymer manufacturing. Using this process to make low molar mass polycarbonate polyols is a commercially relevant route to new thermosets and polyurethanes. In contrast, high molar mass polycarbonates, produced from CO2, generally under-deliver in terms of properties, and one of the most widely investigated, poly(cyclohexene carbonate), is limited by its low elongation at break and high brittleness. Here, a new catalytic polymerization process is reported that selectively and efficiently yields degradable ABA-block polymers, incorporating 6–23 wt % CO2. The polymers are synthesized using a new, highly active organometallic heterodinuclear Zn(II)/Mg(II) catalyst applied in a one-pot procedure together with biobased ε-decalactone, cyclohexene oxide, and carbon dioxide to make a series of poly(cyclohexene carbonate-b-decalactone-b-cyclohexene carbonate) [PCHC-PDL-PCHC]. The process is highly selective (CO2 selectivity >99% of theoretical value), allows for high monomer conversions (>90%), and yields polymers with predictable compositions, molar mass (from 38–71 kg mol–1), and forms dihydroxyl telechelic chains. These new materials improve upon the properties of poly(cyclohexene carbonate) and, specifically, they show good thermal stability (Td,5 ∼ 280 °C), high toughness (112 MJ m–3), and very high elongation at break (>900%). Materials properties are improved by precisely controlling both the quantity and location of carbon dioxide in the polymer chain. Preliminary studies show that polymers are stable in aqueous environments at room temperature over months, but they are rapidly degraded upon gentle heating in an acidic environment (60 °C, toluene, p-toluene sulfonic acid). The process is likely generally applicable to many other lactones, lactides, anhydrides, epoxides, and heterocumulenes and sets the scene for a host of new applications for CO2-derived polymers.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sustainable polymers from renewable resources
Zhu, Y., Romain, C., & Williams, C. K. (2016) · Nature · doi:10.1038/nature21001 · Cited by 2,762
Self-citationThe technological and economic prospects for CO2 utilization and removal
Hepburn, C., Adlen, E., Beddington, J., Carter, E. A., Fuss, S., Mac Dowell, N., Minx, J. C., Smith, P., & Williams, C. K. (2019) · Nature · doi:10.1038/s41586-019-1681-6 · Cited by 2,523
Self-citationArtz, J., Müller, T. E., Thenert, K., Kleinekorte, J., Meys, R., Sternberg, A., Bardow, A., & Leitner, W. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00435 · Cited by 2,436
Influence of Diluent and of Copolymer Composition on the Glass Temperature of a Poly-mer System
Fox, T. (1956) · Medical Entomology and Zoology · Cited by 1,800
CO2-fixation into cyclic and polymeric carbonates: principles and applications
Kamphuis, A. J., Picchioni, F., & Pescarmona, P. P. (2019) · Green Chemistry · doi:10.1039/c8gc03086c · Cited by 828
Polymer chemistry: an introduction
(1999) · Choice Reviews Online · doi:10.5860/choice.36-5698 · Cited by 780
Aliphatic Polyester Block Polymers: Renewable, Degradable, and Sustainable
Hillmyer, M. A., & Tolman, W. B. (2014) · Accounts of Chemical Research · doi:10.1021/ar500121d · Cited by 635
Longo, J. M., Sanford, M. J., & Coates, G. W. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00553 · Cited by 596
Ring-opening copolymerization (ROCOP): synthesis and properties of polyesters and polycarbonates
Paul, S., Zhu, Y., Romain, C., Brooks, R., Saini, P. K., & Williams, C. K. (2015) · Chemical Communications · doi:10.1039/c4cc10113h · Cited by 593
Self-citationChameleon-like elastomers with molecularly encoded strain-adaptive stiffening and coloration
Vatankhah-Varnosfaderani, M., Keith, A. N., Cong, Y., Liang, H., Rosenthal, M., Sztucki, M., Clair, C., Magonov, S., Ivanov, D. A., Dobrynin, A. V., et al. (2018) · Science · doi:10.1126/science.aar5308 · Cited by 519
Opportunities and Challenges for Catalysis in Carbon Dioxide Utilization
Burkart, M. D., Hazari, N., Tway, C. L., & Zeitler, E. L. (2019) · ACS Catalysis · doi:10.1021/acscatal.9b02113 · Cited by 471
von der Assen, N., & Bardow, A. (2014) · Green Chem. · doi:10.1039/c4gc00513a · Cited by 399
Carbon dioxide (CO 2 ) as sustainable feedstock for polyurethane production
Langanke, J., Wolf, A., Hofmann, J., Böhm, K., Subhani, M. A., Müller, T. E., Leitner, W., & Gürtler, C. (2014) · Green Chem. · doi:10.1039/c3gc41788c · Cited by 361
Bio-based polycarbonate as synthetic toolbox
Hauenstein, O., Agarwal, S., & Greiner, A. (2016) · Nature Communications · doi:10.1038/ncomms11862 · Cited by 305
Kember, M. R., & Williams, C. K. (2012) · Journal of the American Chemical Society · doi:10.1021/ja307096m · Cited by 303
Self-citationCarbon dioxide-based functional polycarbonates: Metal catalyzed copolymerization of CO2 and epoxides
Wang, Y., & Darensbourg, D. J. (2018) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2018.06.004 · Cited by 274
Viscoelastic Windows of Pressure-Sensitive Adhesives
Chang, E. P. (1991) · The Journal of Adhesion · doi:10.1080/00218469108026513 · Cited by 269
Chemoselective Polymerizations from Mixtures of Epoxide, Lactone, Anhydride, and Carbon Dioxide
Romain, C., Zhu, Y., Dingwall, P., Paul, S., Rzepa, H. S., Buchard, A., & Williams, C. K. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.5b13070 · Cited by 258
Self-citationChemoselective Polymerization Control: From Mixed‐Monomer Feedstock to Copolymers
Romain, C., & Williams, C. K. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201309575 · Cited by 238
Self-citationTreatise on adhesion and adhesives
Zettlemoyer, A. C. (1974) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(74)90343-9 · Cited by 220
Scharfenberg, M., Hilf, J., & Frey, H. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201704302 · Cited by 216
Jutz, F., Buchard, A., Kember, M. R., Fredriksen, S. B., & Williams, C. K. (2011) · Journal of the American Chemical Society · doi:10.1021/ja206352x · Cited by 215
Self-citationCopolymerization of carbon dioxide and epoxides by metal coordination complexes
Kozak, C. M., Ambrose, K., & Anderson, T. S. (2018) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2018.08.019 · Cited by 213
Renewable polycarbonates and polyesters from 1,4-cyclohexadiene
Winkler, M., Romain, C., Meier, M. A. R., & Williams, C. K. (2015) · Green Chemistry · doi:10.1039/c4gc01353k · Cited by 204
Self-citationKoning, C., Wildeson, J., Parton, R., Plum, B., Steeman, P., & Darensbourg, D. J. (2001) · Polymer · doi:10.1016/s0032-3861(00)00709-6 · Cited by 182
The Present and Future of Biologically Inspired Adhesive Interfaces and Materials
Brubaker, C. E., & Messersmith, P. B. (2012) · Langmuir · doi:10.1021/la300044v · Cited by 180
Zhu, Y., Romain, C., & Williams, C. K. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b04541 · Cited by 174
Self-citationDarensbourg, D. J., & Wu, G. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201304778 · Cited by 170
Kernbichl, S., Reiter, M., Adams, F., Vagin, S., & Rieger, B. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b01295 · Cited by 164
Wang, S., Shuai, L., Saha, B., Vlachos, D. G., & Epps, T. H. I. (2018) · ACS Central Science · doi:10.1021/acscentsci.8b00140 · Cited by 163
Cyriac, A., Lee, S. H., Varghese, J. K., Park, E. S., Park, J. H., & Lee, B. Y. (2010) · Macromolecules · doi:10.1021/ma101259k · Cited by 161
Romero-Guido, C., Belo, I., Ta, T. M. N., Cao-Hoang, L., Alchihab, M., Gomes, N., Thonart, P., Teixeira, J. A., Destain, J., & Waché, Y. (2011) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-010-2945-0 · Cited by 161
Chapman, A. M., Keyworth, C. W., Kember, M. R., Lennox, A. J. J., & Williams, C. K. (2015) · ACS Catalysis · doi:10.1021/cs501798s · Cited by 159
Self-citationEllis, W. C., Jung, Y., Mulzer, M., Girolamo, R. D., Lobkovsky, E. B., & Coates, G. W. (2014) · Chemical Science · doi:10.1039/c4sc01686f · Cited by 155
Kissling, S., Lehenmeier, M. W., Altenbuchner, P. T., Kronast, A., Reiter, M., Deglmann, P., Seemann, U. B., & Rieger, B. (2015) · Chemical Communications · doi:10.1039/c5cc00784d · Cited by 154
Pressure-Sensitive Adhesives from Renewable Triblock Copolymers
Shin, J., Martello, M. T., Shrestha, M., Wissinger, J. E., Tolman, W. B., & Hillmyer, M. A. (2011) · Macromolecules · doi:10.1021/ma102216d · Cited by 151
Enhanced Adhesion and Cohesion of Bioinspired Dry/Wet Pressure-Sensitive Adhesives
Tiu, B. D. B., Delparastan, P., Ney, M. R., Gerst, M., & Messersmith, P. B. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b08429 · Cited by 144
Thermoplastic Elastomers Derived from Menthide and Tulipalin A
Shin, J., Lee, Y., Tolman, W. B., & Hillmyer, M. A. (2012) · Biomacromolecules · doi:10.1021/bm3012852 · Cited by 142
Physical properties of aliphatic polycarbonates made from CO2 and epoxides
Thorat, S. D., Phillips, P. J., Semenov, V. V., & Gakh, A. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.12355 · Cited by 141
van der Meulen, I., Gubbels, E., Huijser, S., Sablong, R., Koning, C. E., Heise, A., & Duchateau, R. (2011) · Macromolecules · doi:10.1021/ma200685u · Cited by 140
Alagi, P., Ghorpade, R. V., Choi, Y. J., Patil, U. M., Kim, I., Baik, J. H., & Hong, S. C. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b03046 · Cited by 140
Ji, H., Wang, B., Pan, L., & Li, Y. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201810083 · Cited by 140
Heterodinuclear zinc and magnesium catalysts for epoxide/CO 2 ring opening copolymerizations
Trott, G., Garden, J. A., & Williams, C. K. (2019) · Chemical Science · doi:10.1039/c9sc00385a · Cited by 140
Self-citationPaul, S., Romain, C., Shaw, J. S., & Williams, C. K. (2015) · Macromolecules · doi:10.1021/acs.macromol.5b01293 · Cited by 137
Self-citationBuchard, A., Jutz, F., Kember, M. R., White, A. J. P., Rzepa, H. S., & Williams, C. K. (2012) · Macromolecules · doi:10.1021/ma300803b · Cited by 137
Self-citationSaini, P. K., Romain, C., & Williams, C. K. (2014) · Chemical Communications · doi:10.1039/c3cc49158g · Cited by 137
Self-citationChain transfer agents utilized in epoxide and CO 2 copolymerization processes
Darensbourg, D. J. (2019) · Green Chemistry · doi:10.1039/c9gc00620f · Cited by 132
Wu, G., & Darensbourg, D. J. (2016) · Macromolecules · doi:10.1021/acs.macromol.5b02752 · Cited by 130
Acrylic Triblock Copolymers Incorporating Isosorbide for Pressure Sensitive Adhesives
Gallagher, J. J., Hillmyer, M. A., & Reineke, T. M. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b00455 · Cited by 130
ε-Decalactone: A Thermoresilient and Toughening Comonomer to Poly( l -lactide)
Olsén, P., Borke, T., Odelius, K., & Albertsson, A. (2013) · Biomacromolecules · doi:10.1021/bm400733e · Cited by 129
Nagae, H., Aoki, R., AKUTAGAWA, S., Kleemann, J., Tagawa, R., Schindler, T., Choi, G., Spaniol, T. P., Tsurugi, H., Okuda, J., et al. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201709218 · Cited by 128
Triblock copolymers from lactide and telechelic poly(cyclohexene carbonate)
Kember, M. R., Copley, J., Buchard, A., & Williams, C. K. (2012) · Polymer Chemistry · doi:10.1039/c2py00543c · Cited by 126
Self-citationIntegrating Mussel Chemistry into a Bio-Based Polymer to Create Degradable Adhesives
Jenkins, C. L., Siebert, H. M., & Wilker, J. J. (2017) · Macromolecules · doi:10.1021/acs.macromol.6b02213 · Cited by 126
Stößer, T., & Williams, C. K. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201801400 · Cited by 126
Self-citationEasy access to oxygenated block polymers via switchable catalysis
Stößer, T., Sulley, G. S., Gregory, G. L., & Williams, C. K. (2019) · Nature Communications · doi:10.1038/s41467-019-10481-w · Cited by 118
Self-citationKim, J. G., Cowman, C. D., LaPointe, A. M., Wiesner, U. B., & Coates, G. W. (2011) · Macromolecules · doi:10.1021/ma102585a · Cited by 114
Lee, S., Lee, K., Kim, Y.-W., & Shin, J. (2015) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b00580 · Cited by 110
Self-citationPentablock Copolymer from Tetracomponent Monomer Mixture Using a Switchable Dizinc Catalyst
Chen, T. T. D., Zhu, Y., & Williams, C. K. (2018) · Macromolecules · doi:10.1021/acs.macromol.8b01224 · Cited by 110
Self-citationStößer, T., Mulryan, D., & Williams, C. K. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201810245 · Cited by 108
Self-citationWang, Y., Zhao, Y., Ye, Y., Peng, H., Zhou, X., Xie, X., Wang, X., & Wang, F. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201710734 · Cited by 104
Preparation of thermoplastic polyurethanes using in situ generated poly(propylene carbonate)-diols
Lee, S. H., Cyriac, A., Jeon, J. Y., & Lee, B. Y. (2012) · Polymer Chemistry · doi:10.1039/c2py00010e · Cited by 99
Stößer, T., Li, C., Unruangsri, J., Saini, P. K., Sablong, R., Meier, M. A. R., Williams, C. K., & Koning, C. E. (2017) · Polymer Chemistry · doi:10.1039/c7py01223c · Cited by 96
Self-citationMultiblock Polyesters Demonstrating High Elasticity and Shape Memory Effects
Zhu, Y., Radlauer, M. R., Schneiderman, D. K., Shaffer, M. S. P., Hillmyer, M. A., & Williams, C. K. (2018) · Macromolecules · doi:10.1021/acs.macromol.7b02690 · Cited by 86
Self-citationHomo- and Block Copolymerizations of ε-Decalactone with l-Lactide Catalyzed by Lanthanum Compounds
Lin, J.-O., Chen, W., Shen, Z., & Ling, J. (2013) · Macromolecules · doi:10.1021/ma401218p · Cited by 79
‘Switch’ catalysis: from monomer mixtures to sequence-controlled block copolymers
Stößer, T., Chen, T. T. D., Zhu, Y., & Williams, C. K. (2017) · Philosophical Transactions of the Royal Society A Mathematical Physical and Engineering Sciences · doi:10.1098/rsta.2017.0066 · Cited by 79
Self-citationKernbichl, S., Reiter, M., Mock, J., & Rieger, B. (2019) · Macromolecules · doi:10.1021/acs.macromol.9b01777 · Cited by 78
Structural Change Accompanied by Plastic-to-Rubber Transition of SBS Block Copolymers
Fujimura, M., Hashimoto, T., & Kawai, H. (1978) · Rubber Chemistry and Technology · doi:10.5254/1.3545830 · Cited by 74
Groups 1, 2 and Zn(II) Heterodinuclear Catalysts for Epoxide/CO2 Ring-Opening Copolymerization
Deacy, A. C., Durr, C. B., Garden, J. A., White, A. J. P., & Williams, C. K. (2018) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.8b02923 · Cited by 73
Self-citationPolyurethane toughened polylactide
Yuan, Y., & Ruckenstein, E. (1998) · Polymer Bulletin · doi:10.1007/s002890050280 · Cited by 66
Zhao, Y., Wang, Y., Zhou, X., Xue, Z., Wang, X., Xie, X., & Poli, R. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201906140 · Cited by 61
Flexible polyurethane foams formulated with polyols derived from waste carbon dioxide
DeBolt, M., Kızıltaş, A., Mielewski, D. F., Waddington, S., & Nagridge, M. J. (2016) · Journal of Applied Polymer Science · doi:10.1002/app.44086 · Cited by 59
High-Performance Pressure-Sensitive Adhesives from Renewable Triblock Copolymers
Ding, K., John, A., Shin, J., Lee, Y., Quinn, T., Tolman, W. B., & Hillmyer, M. A. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00754 · Cited by 58
Nasiri, M., Saxon, D. J., & Reineke, T. M. (2018) · Macromolecules · doi:10.1021/acs.macromol.7b02248 · Cited by 58
Orthogonal functionalization of alternating polyesters: selective patterning of (AB) n sequences
Yi, N., Chen, T. T. D., Unruangsri, J., Zhu, Y., & Williams, C. K. (2019) · Chemical Science · doi:10.1039/c9sc03756j · Cited by 53
Self-citationDi‐Zinc–Aryl Complexes: CO2 Insertions and Applications in Polymerisation Catalysis
Romain, C., Garden, J. A., Trott, G., Buchard, A., White, A. J. P., & Williams, C. K. (2017) · Chemistry - A European Journal · doi:10.1002/chem.201701013 · Cited by 49
Self-citationZhang, Y., Yang, G., & Wu, G. (2018) · Macromolecules · doi:10.1021/acs.macromol.8b00576 · Cited by 48
In Situ Generated ABA Block Copolymers from CO2, Cyclohexene Oxide, and Poly(dimethylsiloxane)s
Reiter, M., Kronast, A., Kissling, S., & Rieger, B. (2016) · ACS Macro Letters · doi:10.1021/acsmacrolett.6b00133 · Cited by 45
Ding, W., Wang, S., Yao, K., Ganewatta, M. S., Tang, C., & Robertson, M. L. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b02676 · Cited by 45
Strain-Induced Plastic-to-Rubber Transition of a SBS Block Copolymer and Its Blend with PS
Hashimoto, T., Fujimura, M., Saijo, K., Kawai, H., Diamant, J., & SHEN, M. (1979) · Advances in chemistry series · doi:10.1021/ba-1979-0176.ch014 · Cited by 43
Waste not, want not: CO 2 (re)cycling into block polymers
Raman, S. K., Raja, R., Arnold, P. L., Davidson, M. G., & Williams, C. K. (2019) · Chemical Communications · doi:10.1039/c9cc02459j · Cited by 41
Self-citationOne-pot copolymerization of epoxides/carbon dioxide and lactide using a ternary catalyst system
Li, X., Hu, C., Pang, X., Duan, R., & Chen, X. (2018) · Catalysis Science & Technology · doi:10.1039/c8cy01856a · Cited by 37
Morphological Consequences of Frustration in ABC Triblock Polymers
Radlauer, M. R., Sinturel, C., Asai, Y., Arora, A., Bates, F. S., Dorfman, K. D., & Hillmyer, M. A. (2016) · Macromolecules · doi:10.1021/acs.macromol.6b02112 · Cited by 26
Study on the influence of metal residue on thermal degradation of poly(cyclohexene carbonate)
Li, G., Qin, Y., Wang, X., Zhao, X., & Wang, F. (2010) · Journal of Polymer Research · doi:10.1007/s10965-010-9521-2 · Cited by 24
Zhou, Y., Duan, R., Li, X., Pang, X., Wang, X., & Chen, X. (2017) · Chemistry - An Asian Journal · doi:10.1002/asia.201701048 · Cited by 16
Cited by
Bio-based polymers with performance-advantaged properties
Cywar, R. M., Rorrer, N. A., Hoyt, C. B., Beckham, G. T., & Chen, E. Y.-X. (2021) · Nature Reviews Materials · doi:10.1038/s41578-021-00363-3 · Cited by 811
Clocchiatti, A., Cora, E., Zhang, Y., & Dotto, G. P. (2016) · Nature Reviews Cancer · doi:10.1038/nrc.2016.30 · Cited by 374
Strategies for the synthesis of block copolymers with biodegradable polyester segments
Diaz, C., & Mehrkhodavandi, P. (2021) · Polymer Chemistry · doi:10.1039/d0py01534b · Cited by 74
Huang, H.-Y., Xie, M., Wang, S.-Q., Huang, Y.-T., Luo, Y.-H., Yu, D.-G., Cai, Z., & Zhu, J.-B. (2025) · Journal of the American Chemical Society · doi:10.1021/jacs.4c17703 · Cited by 33
Rittinghaus, R. D., Zenner, J., Pich, A., Kol, M., & Herres‐Pawlis, S. (2022) · Angewandte Chemie International Edition · doi:10.1002/anie.202112853 · Cited by 32
Metadata
- Authors
- Sulley, G. S., Gregory, G. L., Chen, T. T. D., Peña Carrodeguas, L., Trott, G., Santmarti, A., Lee, K.-Y., Terrill, N. J., & Williams, C. K.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-02-20
- Volume
- 142
- Issue
- 9
- Pages
- 4367-4378
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W3006916761
- Cited by
- 279
- References
- 84
- FWCI
- 13.33
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.