The DOI matches its Crossref record; 39 of the 39 references it cites were found in a registry or an index.
Iron and 1,3,5-Benzenetricarboxylic Metal–Organic Coordination Polymers Prepared by Solvothermal Method and Their Application in Efficient As(V) Removal from Aqueous Solutions
Abstract
Iron and 1,3,5-benzenetricarboxylic (Fe–BTC) metal–organic coordination polymers are synthesized via a simple solvothermal method. The as-synthesized Fe–BTC polymers exhibit gel behavior, which is stable in common organic solvents or in water. The Fe–BTC polymer as an adsorbent for arsenic removal from water is tested. The kinetics and thermodynamics of arsenic adsorption by the Fe–BTC polymer in aqueous solution are investigated comprehensively. The effect of pH on the adsorption is also investigated. Kinetic studies show that the kinetic data are well described by the pseudo-second-order kinetic model. The thermodynamic analysis indicates that the adsorption is spontaneous. The adsorption isotherms can be well described with the Langmuir equation. The Fe–BTC polymers show relatively high arsenic adsorption capacity, more than 6 times that of iron oxide nanoparticles with a size of 50 nm and 36 times that of commercial iron oxide powders. Hence, the as-synthesized Fe–BTC polymers possess relatively high stability and better adsorption characteristic than nanomaterials simultaneously. It also can be considered as a new method to conquer the dilemma between the excellent properties from nanoscale effect and the aggregation of small size particles in the adsorption application of nanoparticle materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Analysis of XPS spectra of Fe2+ and Fe3+ ions in oxide materials
Yamashita, T., & Hayes, P. (2008) · Applied Surface Science · doi:10.1016/j.apsusc.2007.09.063 · Cited by 6,673
Hybrid porous solids: past, present, future
Férey, G. (2008) · Chem. Soc. Rev. · doi:10.1039/b618320b · Cited by 5,822
Hydrogen Storage in Microporous Metal-Organic Frameworks
Rosi, N. L., Eckert, J., Eddaoudi, M., Vodak, D. T., Kim, J., O'Keeffe, M., & Yaghi, O. M. (2003) · Science · doi:10.1126/science.1083440 · Cited by 4,846
A homochiral metal–organic porous material for enantioselective separation and catalysis
Seo, J. S., Whang, D., Lee, H., Jun, S. I., Oh, J., Jeon, Y. J., & Kim, K. (2000) · Nature · doi:10.1038/35010088 · Cited by 3,924
Arsenic removal from water/wastewater using adsorbents—A critical review
Mohan, D., & Pittman, C. U. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2007.01.006 · Cited by 3,536
Metal–organic frameworks: a new class of porous materials
Rowsell, J. L. C., & Yaghi, O. M. (2004) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2004.03.034 · Cited by 2,963
The pervasive chemistry of metal–organic frameworks
Long, J. R., & Yaghi, O. M. (2009) · Chemical Society Reviews · doi:10.1039/b903811f · Cited by 2,394
Metal–organic frameworks—prospective industrial applications
Mueller, U., Schubert, M., Teich, F., Puetter, H., Schierle-Arndt, K., & Pastré, J. (2006) · J. Mater. Chem. · doi:10.1039/b511962f · Cited by 2,325
Highly controlled acetylene accommodation in a metal–organic microporous material
Matsuda, R., Kitaura, R., Kitagawa, S., Kubota, Y., Belosludov, R. V., Kobayashi, T. C., Sakamoto, H., Chiba, T., Takata, M., Kawazoe, Y., et al. (2005) · Nature · doi:10.1038/nature03852 · Cited by 1,520
Adsorption and desorption of natural organic matter on iron oxide: mechanisms and models
Gu, B., Schmitt, J., Chen, Z., Liang, L., & McCarthy, J. F. (1994) · Environmental Science & Technology · doi:10.1021/es00050a007 · Cited by 1,448
Exceptional H2 Saturation Uptake in Microporous Metal−Organic Frameworks
Wong-Foy, A. G., Matzger, A. J., & Yaghi, O. M. (2006) · Journal of the American Chemical Society · doi:10.1021/ja058213h · Cited by 1,281
Low-Field Magnetic Separation of Monodisperse Fe 3 O 4 Nanocrystals
Yavuz, C. T., Mayo, J. T., Yu, W. W., Prakash, A., Falkner, J. C., Yean, S., Cong, L., Shipley, H. J., Kan, A., Tomson, M., et al. (2006) · Science · doi:10.1126/science.1131475 · Cited by 1,250
Removal of Arsenic(III) from Groundwater by Nanoscale Zero-Valent Iron
Kanel, S. R., Manning, B., Charlet, L., & Choi, H. (2005) · Environmental Science & Technology · doi:10.1021/es048991u · Cited by 1,166
Haque, E., Jun, J. W., & Jhung, S. H. (2011) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2010.09.035 · Cited by 1,159
Adsorption thermodynamic, kinetic and desorption studies of Pb2+ on carbon nanotubes
Li, Y.-H., Di, Z., Ding, J., Wu, D., Luan, Z., & Zhu, Y. (2005) · Water Research · doi:10.1016/j.watres.2004.11.004 · Cited by 736
Dincǎ, M., & Long, J. R. (2005) · Journal of the American Chemical Society · doi:10.1021/ja0523082 · Cited by 736
Separation of Hydrocarbons with a Microporous Metal–Organic Framework
Pan, L., Olson, D. H., Ciemnolonski, L. R., Heddy, R., & Li, J. (2006) · Angewandte Chemie International Edition · doi:10.1002/anie.200503503 · Cited by 731
Haque, E., Lee, J. E., Jang, I. T., Hwang, Y. K., Chang, J.-S., Jegal, J., & Jhung, S. H. (2010) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2010.05.047 · Cited by 695
Alaerts, L., Séguin, E., Poelman, H., Thibault‐Starzyk, F., Jacobs, P. A., & De Vos, D. E. (2006) · Chemistry – A European Journal · doi:10.1002/chem.200600220 · Cited by 694
Removal of arsenic from water by supported nano zero-valent iron on activated carbon
Zhu, H., Jia, Y., Wu, X., & Wang, H. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2009.08.031 · Cited by 688
Self-citationAmine functionalised metal organic frameworks (MOFs) as adsorbents for carbon dioxide
Arstad, B., Fjellvåg, H., Kongshaug, K. O., Swang, O., & Blom, R. (2008) · Adsorption · doi:10.1007/s10450-008-9137-6 · Cited by 472
Pan, L., Parker, B., Huang, X., Olson, D. H., Lee, & Li, J. (2006) · Journal of the American Chemical Society · doi:10.1021/ja057667b · Cited by 430
Self-citationRemoval of chromium from aqueous solution by using oxidized multiwalled carbon nanotubes
Hu, J., Chen, C., Zhu, X., & Wang, X. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2008.06.058 · Cited by 419
Capadona, J. R., Van Den Berg, O., Capadona, L. A., Schroeter, M., Rowan, S. J., Tyler, D. J., & Weder, C. (2007) · Nature Nanotechnology · doi:10.1038/nnano.2007.379 · Cited by 419
Arsenic removal by iron-modified activated carbon
Chen, W., Parette, R., Zou, J., Cannon, F. S., & Dempsey, B. A. (2007) · Water Research · doi:10.1016/j.watres.2007.01.052 · Cited by 413
Removal of Arsenic by Bead Cellulose Loaded with Iron Oxyhydroxide from Groundwater
Guo, X., & Chen, F. (2005) · Environmental Science & Technology · doi:10.1021/es048080k · Cited by 389
Removal of copper from aqueous solution by carbon nanotube/calcium alginate composites
Li, Y., Liu, F., Xia, B., Du, Q., Zhang, P., Wang, D., Wang, Z., & Xia, Y. (2010) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2009.12.114 · Cited by 324
LLABRESIXAMENA, F., CASANOVA, O., GALIASSOTAILLEUR, R., GARCIA, H., & CORMA, A. (2008) · Journal of Catalysis · doi:10.1016/j.jcat.2008.02.011 · Cited by 281
Arsenic(V) removal with a Ce(IV)-doped iron oxide adsorbent
Zhang, Y., Yang, M., & Huang, X. (2003) · Chemosphere · doi:10.1016/s0045-6535(02)00850-0 · Cited by 266
Self-citationSorption materials for arsenic removal from water:
Daus, B., Wennrich, R., & Weiss, H. (2004) · Water Research · doi:10.1016/j.watres.2004.04.003 · Cited by 247
Removal of fluoride by hydrous manganese oxide-coated alumina: Performance and mechanism
Teng, S.-X., Wang, S.-G., Gong, W.-X., Liu, X.-W., & Gao, B.-Y. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2009.02.133 · Cited by 213
Khan, N. A., Jun, J. W., Jeong, J. H., & Jhung, S. H. (2011) · Chem. Commun. · doi:10.1039/c0cc04759g · Cited by 207
Gardella, J. A., Ferguson, S. A., & Chin, R. L. (1986) · Applied Spectroscopy · doi:10.1366/0003702864509565 · Cited by 199
Zhao, X., Jia, Q., Song, N., Zhou, W., & Li, Y. (2010) · Journal of Chemical & Engineering Data · doi:10.1021/je100586r · Cited by 156
Upadhyaya, G., Jackson, J., Webster, T. M., Hyun, S. P., Brown, J. C., Hayes, K. F., & Raskin, L. M. (2010) · Water Research · doi:10.1016/j.watres.2010.07.037 · Cited by 71
Adsorption of arsenic(V) by iron-oxide-coated diatomite (IOCD)
Pan, Y.-F., Chiou, C. T., & Lin, T. (2010) · Environmental Science and Pollution Research · doi:10.1007/s11356-010-0325-z · Cited by 64
Iesan, C. M., Căpăţ, C., Ruta, F., & Udrea, I. (2008) · Water Research · doi:10.1016/j.watres.2008.06.011 · Cited by 58
Tollefson, J. (2007) · Nature · doi:10.1038/450334a · Cited by 51
Zheng, Y., Cheng, Y., Wang, Y., et al. (2005) · Journal of Crystal Growth · doi:10.1016/j.jcrysgro.2005.06.051 · Cited by 33
Cited by
Metal–Organic Framework-Based Hierarchically Porous Materials: Synthesis and Applications
Cai, G., Yan, P., Zhang, L., Zhou, H.-C., & Jiang, H.-L. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00243 · Cited by 1,631
Applications of water stable metal–organic frameworks
Wang, C., Liu, X., Keser Demir, N., Chen, J. P., & Li, K. (2016) · Chemical Society Reviews · doi:10.1039/c6cs00362a · Cited by 1,249
Metal–organic frameworks for heavy metal removal from water
Kobielska, P. A., Howarth, A. J., Farha, O. K., & Nayak, S. (2018) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2017.12.010 · Cited by 1,014
Pi, Y., Li, X., Xia, Q., Wu, J., Li, Y., Xiao, J., & Li, Z. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.12.092 · Cited by 549
Technologies for Arsenic Removal from Water: Current Status and Future Perspectives
Nicomel, N., Leus, K., Folens, K., Van Der Voort, P., & Du Laing, G. (2015) · International Journal of Environmental Research and Public Health · doi:10.3390/ijerph13010062 · Cited by 486
Metadata
- Authors
- Zhu, B.-J., Yu, X.-Y., Jia, Y., Peng, F.-M., Sun, B., Zhang, M.-Y., Luo, T., Liu, J.-H., & Huang, X.-J.
- Venue
- The Journal of Physical Chemistry C
- Publisher
- American Chemical Society (ACS)
- Published
- 2012-04-09
- Volume
- 116
- Issue
- 15
- Pages
- 8601-8607
- ISSN
- 1932-7447 (ISSN-L)
- 1932-7455
- OpenAlex
- W2330618546
- Cited by
- 353
- References
- 39
- FWCI
- 7.93
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
