Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 907

The DOI matches its Crossref record; 85 of the 85 references it cites were found in a registry or an index.

High-Density Sodium and Lithium Ion Battery Anodes from Banana Peels

Lotfabad, Elmira Memarzadeh, Ding, Jia, Cui, Kai, Kohandehghan, Alireza, Kalisvaart, W. Peter, Hazelton, Michael, Mitlin, David·2014·ACS Nano

Abstract

Banana peel pseudographite (BPPG) offers superb dual functionality for sodium ion battery (NIB) and lithium ion battery (LIB) anodes. The materials possess low surface areas (19-217 m(2) g(-1)) and a relatively high electrode packing density (0.75 g cm(-3) vs ∼1 g cm(-3) for graphite). Tested against Na, BPPG delivers a gravimetric (and volumetric) capacity of 355 mAh g(-1) (by active material ∼700 mAh cm(-3), by electrode volume ∼270 mAh cm(-3)) after 10 cycles at 50 mA g(-1). A nearly flat ∼200 mAh g(-1) plateau that is below 0.1 V and a minimal charge/discharge voltage hysteresis make BPPG a direct electrochemical analogue to graphite but with Na. A charge capacity of 221 mAh g(-1) at 500 mA g(-1) is degraded by 7% after 600 cycles, while a capacity of 336 mAh g(-1) at 100 mAg(-1) is degraded by 11% after 300 cycles, in both cases with ∼100% cycling Coulombic efficiency. For LIB applications BPPG offers a gravimetric (volumetric) capacity of 1090 mAh g(-1) (by material ∼2200 mAh cm(-3), by electrode ∼900 mAh cm(-3)) at 50 mA g(-1). The reason that BPPG works so well for both NIBs and LIBs is that it uniquely contains three essential features: (a) dilated intergraphene spacing for Na intercalation at low voltages; (b) highly accessible near-surface nanopores for Li metal filling at low voltages; and (c) substantial defect content in the graphene planes for Li adsorption at higher voltages. The <0.1 V charge storage mechanism is fundamentally different for Na versus for Li. A combination of XRD and XPS demonstrates highly reversible Na intercalation rather than metal underpotential deposition. By contrast, the same analysis proves the presence of metallic Li in the pores, with intercalation being much less pronounced.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1021/nn502045y

Cites

85 of 85 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 85 references

Research works printed but not linked: 24

  1. Wang, 2006, Triethyl Orthoformate as a New Film-Forming Electrolytes Solvent for Lithium-Ion Batteries with Graphite Anodes, Electrochim. Acta, 51, 4950, 10.1016/j.electacta.2006.01.038 · DOI
  2. Li, 2014, Free-Standing and Binder-Free Sodium-Ion Electrodes with Ultralong Cycle Life and High Rate Performance Based on Porous Carbon Nanofibers, Nanoscale, 6, 693, 10.1039/C3NR05022J · doi:10.1039/c3nr05022j
  3. Li, 2013, Simply Mixed Commercial Red Phosphorus and Carbon Nanotube Composite with Exceptionally Reversible Sodium-Ion Storage, Nano Lett., 13, 5480, 10.1021/nl403053v · doi:10.1021/nl403053v
  4. Alcántara, 2002, NiCo2O4 Spinel: First Report on a Transition Metal Oxide for the Negative Electrode of Sodium-Ion Batteries, Chem. Mater., 14, 2847, 10.1021/cm025556v · doi:10.1021/cm025556v
  5. Xu, 2013, Nanocrystalline Anatase TiO2: A New Anode Material for Rechargeable Sodium Ion Batteries, Chem. Commun., 49, 8973, 10.1039/c3cc45254a · doi:10.1039/c3cc45254a
  6. Li, 2013, Performance of Nanocrystalline Ni3N as a Negative Electrode for Sodium-Ion Batteries, J. Mater. Chem. A, 1, 6441, 10.1039/c3ta00184a · doi:10.1039/c3ta00184a
  7. Baggetto, 2013, Intrinsic Thermodynamic and Kinetic Properties of Sb Electrodes for Li-Ion and Na-Ion Batteries: Experiment and Theory, J. Mater. Chem. A, 1, 7985, 10.1039/c3ta11568b · doi:10.1039/c3ta11568b
  8. Baggetto, 2013, Characterization of Sodium Ion Electrochemical Reaction with Tin Anodes: Experiment and Theory, J. Power Sources, 234, 48, 10.1016/j.jpowsour.2013.01.083 · doi:10.1016/j.jpowsour.2013.01.083
  9. Wu, 2014, Sb–C Nanofibers with Long Cycle Life as an Anode Material for High-Performance Sodium-Ion Batteries, Energy Environ. Sci., 7, 323, 10.1039/C3EE42944J · doi:10.1039/c3ee42944j
  10. Liu, 2013, Tin-Coated Viral Nanoforests as Sodium-Ion Battery Anodes, ACS Nano, 7, 3627, 10.1021/nn400601y · doi:10.1021/nn400601y
  11. Jung, 2014, Atom-Level Understanding of the Sodiation Process in Silicon Anode Material, J. Phys. Chem. Lett., 5, 1283, 10.1021/jz5002743 · doi:10.1021/jz5002743
  12. Chen, 2013, Role of Mesoporosity in Cellulose Fibers for Paper-Based Fast Electrochemical Energy Storage, J. Mater. Chem. A, 1, 8201, 10.1039/c3ta10972k · doi:10.1039/c3ta10972k
  13. Wang, 2013, Functionalized N-Doped Interconnected Carbon Nanofibers as an Anode Material for Sodium-Ion Storage with Excellent Performance, Carbon, 55, 328, 10.1016/j.carbon.2012.12.072 · doi:10.1016/j.carbon.2012.12.072
  14. Datta, 2014, Defective Graphene as a High-Capacity Anode Material for Na- and Ca-Ion Batteries, ACS Appl. Mater. Interfaces, 6, 1788, 10.1021/am404788e · DOI · Paper page
  15. Liu, 2013, Feasibility of Lithium Storage on Graphene and Its Derivatives, J. Phys. Chem. Lett., 4, 1737, 10.1021/jz400491b · DOI
  16. Billaud, 1993, Electrochemical Synthesis of Binary Graphite-Lithium Intercalation Compounds, Mater. Res. Bull., 28, 477, 10.1016/0025-5408(93)90130-6 · doi:10.1016/0025-5408(93)90130-6
  17. Carlsson, 2006, Structural, Electronic, and Chemical Properties of Nanoporous Graphene, Phys. Rev. Lett., 96, 046806, 10.1103/PhysRevLett.96.046806 · doi:10.1103/physrevlett.96.046806
  18. Alcantara, 2001, Carbon Black: A Promising Electrode Material for Sodium-Ion Batteries, Electrochem. Commun., 3, 639, 10.1016/S1388-2481(01)00244-2 · doi:10.1016/s1388-2481(01)00244-2
  19. Kumar, 2011, Direct Synthesis of Lithium-Intercalated Graphene for Electrochemical Energy Storage Application, ACS Nano, 5, 4345, 10.1021/nn201527p · doi:10.1021/nn201527p
  20. Wang, 2014, Hybrid Carbon Nanotube and Graphene Nanostructures for Lithium Ion Battery Anodes, Nano Energy, 3, 113, 10.1016/j.nanoen.2013.10.005 · doi:10.1016/j.nanoen.2013.10.005
  21. Li, 2013, Structurally Tailored Graphene Nanosheets as Lithium Ion Battery Anodes: An Insight to Yield Exceptionally High Lithium Storage Performance, Nanoscale, 5, 12607, 10.1039/c3nr04823c · doi:10.1039/c3nr04823c
  22. Hao, 2012, Monolithic Carbons with Tailored Crystallinity and Porous Structure as Lithium-Ion Anodes for Fundamental Understanding Their Rate Performance and Cycle Stability, J. Phys. Chem. C, 116, 10303, 10.1021/jp2124229 · doi:10.1021/jp2124229
  23. Chen, 2009, Carbon Nanotube Network Modified Carbon Fibre Paper for Li-Ion Batteries, Energy Environ. Sci., 2, 393, 10.1039/b816135f · doi:10.1039/b816135f
  24. Chen, 2012, In Situ Formation of Hollow Graphitic Carbon Nanospheres in Electrospun Amorphous Carbon Nanofibers for High-Performance Li-Based Batteries, Nanoscale, 4, 6800, 10.1039/c2nr31557b · doi:10.1039/c2nr31557b

Cited by

Metadata

Authors
Lotfabad, E. M., Ding, J., Cui, K., Kohandehghan, A., Kalisvaart, W. P., Hazelton, M., & Mitlin, D.
Venue
ACS Nano
Published
2014-06-06
Volume
8
Issue
7
Pages
7115-7129
ISSN
  • 1936-0851 (ISSN-L)
  • 1936-086X
OpenAlex
W1966816561
Cited by
907
References
85
FWCI
46.52
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.