Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat
Sign Up
Cited by 907

The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.

High-Density Sodium and Lithium Ion Battery Anodes from Banana Peels

Lotfabad, Elmira Memarzadeh, Ding, Jia, Cui, Kai, Kohandehghan, Alireza, Kalisvaart, W. Peter, Hazelton, Michael, Mitlin, David·2014·ACS Nano
DOI 10.1021/nn502045y
Open this paper in CoChat — free account

Abstract

Banana peel pseudographite (BPPG) offers superb dual functionality for sodium ion battery (NIB) and lithium ion battery (LIB) anodes. The materials possess low surface areas (19-217 m(2) g(-1)) and a relatively high electrode packing density (0.75 g cm(-3) vs ∼1 g cm(-3) for graphite). Tested against Na, BPPG delivers a gravimetric (and volumetric) capacity of 355 mAh g(-1) (by active material ∼700 mAh cm(-3), by electrode volume ∼270 mAh cm(-3)) after 10 cycles at 50 mA g(-1). A nearly flat ∼200 mAh g(-1) plateau that is below 0.1 V and a minimal charge/discharge voltage hysteresis make BPPG a direct electrochemical analogue to graphite but with Na. A charge capacity of 221 mAh g(-1) at 500 mA g(-1) is degraded by 7% after 600 cycles, while a capacity of 336 mAh g(-1) at 100 mAg(-1) is degraded by 11% after 300 cycles, in both cases with ∼100% cycling Coulombic efficiency. For LIB applications BPPG offers a gravimetric (volumetric) capacity of 1090 mAh g(-1) (by material ∼2200 mAh cm(-3), by electrode ∼900 mAh cm(-3)) at 50 mA g(-1). The reason that BPPG works so well for both NIBs and LIBs is that it uniquely contains three essential features: (a) dilated intergraphene spacing for Na intercalation at low voltages; (b) highly accessible near-surface nanopores for Li metal filling at low voltages; and (c) substantial defect content in the graphene planes for Li adsorption at higher voltages. The <0.1 V charge storage mechanism is fundamentally different for Na versus for Li. A combination of XRD and XPS demonstrates highly reversible Na intercalation rather than metal underpotential deposition. By contrast, the same analysis proves the presence of metallic Li in the pores, with intercalation being much less pronounced.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1021/nn502045y

Cites

3 of 3 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Research works printed but not linked: 106

  1. Tarascon, 2010, Is Lithium the New Gold?, Nat. Chem., 2, 510, 10.1038/nchem.680 · DOI · Paper page
  2. Pan, 2013, Room-Temperature Stationary Sodium-Ion Batteries for Large-Scale Electric Energy Storage, Energy Environ. Sci., 6, 2338, 10.1039/c3ee40847g · DOI · Paper page
  3. Palomares, 2013, Update on Na-Based Battery Materials. A Growing Research Path, Energy Environ. Sci., 6, 2312, 10.1039/c3ee41031e · DOI · Paper page
  4. Slater, 2013, Sodium-Ion Batteries, Adv. Funct. Mater., 23, 947, 10.1002/adfm.201200691 · DOI · Paper page
  5. Cao, 2003, Surface-Modified Graphite as an Improved Intercalating Anode for Lithium-Ion Batteries, Electrochem. Solid-State Lett., 6, A30, 10.1149/1.1534730 · DOI
  6. Lin, 2014, Mildly Expanded Graphite for Anode Materials of Lithium Ion Battery Synthesized with Perchloric Acid, Electrochim. Acta, 116, 170, 10.1016/j.electacta.2013.11.057 · DOI
  7. Wang, 2006, Triethyl Orthoformate as a New Film-Forming Electrolytes Solvent for Lithium-Ion Batteries with Graphite Anodes, Electrochim. Acta, 51, 4950, 10.1016/j.electacta.2006.01.038 · DOI
  8. Peled, 1996, Improved Graphite Anode for Lithium-Ion Batteries; Chemically Bonded Solid Electrolyte Interface and Nanochannel Formation, J. Electrochem. Soc., 143, L4, 10.1149/1.1836372 · DOI · Paper page
  9. Ge, 1988, Fouletier, Electrochemical Intercalation of Sodium in Graphite, Solid State Ionics, 28–30, 1172, 10.1016/0167-2738(88)90351-7 · DOI · Paper page
  10. Stevens, 2001, The Mechanisms of Lithium and Sodium Insertion in Carbon Materials, J. Electrochem. Soc., 148, A803, 10.1149/1.1379565 · DOI · Paper page
  11. Asher, 1959, A Lamellar Compound of Sodium and Graphite, J. Inorg. Nucl. Chem., 10, 238, 10.1016/0022-1902(59)80118-4 · DOI · Paper page
  12. Komaba, 2011, Electrochemical Na Insertion and Solid Electrolyte Interphase for Hard-Carbon Electrodes and Application to Na-Ion Batteries, Adv. Funct. Mater., 21, 3859, 10.1002/adfm.201100854 · DOI · Paper page
  13. Luo, 2013, Carbon Nanofibers Derived from Cellulose Nanofibers as a Long-Life Anode Material for Rechargeable Sodium-Ion Batteries, J. Mater. Chem. A, 1, 10662, 10.1039/c3ta12389h · DOI · Paper page
  14. Ponrouch, 2013, High Capacity Hard Carbon Anodes for Sodium Ion Batteries in Additive Free Electrolyte, Electrochem. Commun., 27, 85, 10.1016/j.elecom.2012.10.038 · DOI · Paper page
  15. Shao, 2013, Surface-Driven Sodium Ion Energy Storage in Nanocellular Carbon Foams, Nano Lett., 13, 3909, 10.1021/nl401995a · DOI · Paper page
  16. Li, 2014, Free-Standing and Binder-Free Sodium-Ion Electrodes with Ultralong Cycle Life and High Rate Performance Based on Porous Carbon Nanofibers, Nanoscale, 6, 693, 10.1039/C3NR05022J · doi:10.1039/c3nr05022j
  17. Kim, 2013, An Amorphous Red Phosphorus/Carbon Composite as a Promising Anode Material for Sodium Ion Batteries, Adv. Mater., 25, 3045, 10.1002/adma.201204877 · DOI · Paper page
  18. Li, 2013, Simply Mixed Commercial Red Phosphorus and Carbon Nanotube Composite with Exceptionally Reversible Sodium-Ion Storage, Nano Lett., 13, 5480, 10.1021/nl403053v · doi:10.1021/nl403053v
  19. Senguttuvan, 2013, Low-Potential Sodium Insertion in a NASICON-Type Structure through the Ti(III)/Ti(II) Redox Couple, J. Am. Chem. Soc., 135, 3897, 10.1021/ja311044t · DOI · Paper page
  20. Zhao, 2012, Disodium Terephthalate (Na2C8H4O4) as High Performance Anode Material for Low-Cost Room-Temperature Sodium-Ion Battery, Adv. Energy Mater., 2, 962, 10.1002/aenm.201200166 · DOI · Paper page
  21. Park, 2011, Electrochemical Properties of NaTi2(PO4)3 Anode for Rechargeable Aqueous Sodium-Ion Batteries, J. Electrochem. Soc., 158, A1067, 10.1149/1.3611434 · DOI · Paper page
  22. Park, 2012, Sodium Terephthalate as an Organic Anode Material for Sodium Ion Batteries, Adv. Mater., 24, 3562, 10.1002/adma.201201205 · DOI · Paper page
  23. Wang, 2013, Microspheric Na2Ti3O7 Consisting of Tiny Nanotubes: An Anode Material for Sodium-Ion Batteries with Ultrafast Charge–Discharge Rates, Nanoscale, 5, 594, 10.1039/C2NR32661B · DOI · Paper page
  24. Pan, 2013, Sodium Storage and Transport Properties in Layered Na2Ti3O7 for Room-Temperature Sodium-Ion Batteries, Adv. Energy Mater., 3, 1186, 10.1002/aenm.201300139 · DOI · Paper page
  25. Wu, 2014, Anatase TiO2 Nanoparticles for High Power Sodium-Ion Anodes, J. Power Sources, 251, 379, 10.1016/j.jpowsour.2013.11.083 · DOI
  26. Alcántara, 2002, NiCo2O4 Spinel: First Report on a Transition Metal Oxide for the Negative Electrode of Sodium-Ion Batteries, Chem. Mater., 14, 2847, 10.1021/cm025556v · doi:10.1021/cm025556v
  27. Xiong, 2011, Amorphous TiO2 Nanotube Anode for Rechargeable Sodium Ion Batteries, J. Phys. Chem. Lett., 2, 2560, 10.1021/jz2012066 · DOI · Paper page
  28. Xu, 2013, Nanocrystalline Anatase TiO2: A New Anode Material for Rechargeable Sodium Ion Batteries, Chem. Commun., 49, 8973, 10.1039/c3cc45254a · doi:10.1039/c3cc45254a
  29. Kim, 2014, Anatase Titania Nanorods as an Intercalation Anode Material for Rechargeable Sodium Batteries, Nano Lett., 14, 416, 10.1021/nl402747x · DOI
  30. Hariharan, 2013, A Rationally Designed Dual Role Anode Material for Lithium-Ion and Sodium-Ion Batteries: Case Study of Eco-Friendly Fe3O4, Phys. Chem. Chem. Phys., 15, 2945, 10.1039/c2cp44572g · DOI · Paper page
  31. Li, 2013, Performance of Nanocrystalline Ni3N as a Negative Electrode for Sodium-Ion Batteries, J. Mater. Chem. A, 1, 6441, 10.1039/c3ta00184a · doi:10.1039/c3ta00184a
  32. Baggetto, 2013, Intrinsic Thermodynamic and Kinetic Properties of Sb Electrodes for Li-Ion and Na-Ion Batteries: Experiment and Theory, J. Mater. Chem. A, 1, 7985, 10.1039/c3ta11568b · doi:10.1039/c3ta11568b
  33. Zhu, 2013, Tin Anode for Sodium-Ion Batteries Using Natural Wood Fiber as a Mechanical Buffer and Electrolyte Reservoir, Nano Lett., 13, 3093, 10.1021/nl400998t · DOI · Paper page
  34. Baggetto, 2013, Characterization of Sodium Ion Electrochemical Reaction with Tin Anodes: Experiment and Theory, J. Power Sources, 234, 48, 10.1016/j.jpowsour.2013.01.083 · doi:10.1016/j.jpowsour.2013.01.083
  35. Xiao, 2012, High Capacity, Reversible Alloying Reactions in SnSb/C Nanocomposites for Na-Ion Battery Applications, Chem. Commun., 48, 3321, 10.1039/c2cc17129e · DOI · Paper page
  36. Wang, 2012, Microstructural Evolution of Tin Nanoparticles during in Situ Sodium Insertion and Extraction, Nano Lett., 12, 5897, 10.1021/nl303305c · DOI
  37. Wu, 2014, Sb–C Nanofibers with Long Cycle Life as an Anode Material for High-Performance Sodium-Ion Batteries, Energy Environ. Sci., 7, 323, 10.1039/C3EE42944J · doi:10.1039/c3ee42944j
  38. Zhu, 2013, Electrospun Sb/C Fibers for a Stable and Fast Sodium-Ion Battery Anode, ACS Nano, 7, 6378, 10.1021/nn4025674 · DOI · Paper page
  39. Han, 2014, Atomic-Layer-Deposition Oxide Nanoglue for Sodium Ion Batteries, Nano Lett., 14, 139, 10.1021/nl4035626 · DOI · Paper page
  40. Liu, 2013, Tin-Coated Viral Nanoforests as Sodium-Ion Battery Anodes, ACS Nano, 7, 3627, 10.1021/nn400601y · doi:10.1021/nn400601y
  41. Jung, 2014, Atom-Level Understanding of the Sodiation Process in Silicon Anode Material, J. Phys. Chem. Lett., 5, 1283, 10.1021/jz5002743 · doi:10.1021/jz5002743
  42. Farbod, 2014, Anodes for Sodium Ion Batteries based on Tin–Germanium–Antimony Alloys, ACS Nano, 8, 4415, 10.1021/nn4063598 · DOI
  43. Qian, 2014, Synergistic Na-Storage Reactions in Sn4P3 as a High-Capacity, Cycle-stable Anode of Na-Ion Batteries, Nano Lett., 14, 1865, 10.1021/nl404637q · DOI · Paper page
  44. Ji, 2014, Controlling SEI Formation on SnSb-Porous Carbon Nanofibers for Improved Na Ion Storage, Adv. Mater., 26, 2901, 10.1002/adma.201304962 · DOI · Paper page
  45. David, 2014, MoS2/Graphene Composite Paper for Sodium-Ion Battery Electrodes, ACS Nano, 8, 1759, 10.1021/nn406156b · DOI · Paper page
  46. Datta, 2014, Defective Graphene as a High-Capacity Anode Material for Na- and Ca-Ion Batteries, ACS Appl. Mater. Interfaces, 6, 1788, 10.1021/am404788e · DOI · Paper page
  47. Naguib, 2014, 25th Anniversary Article: MXenes: A New Family of Two-Dimensional Materials, Adv. Mater., 26, 992, 10.1002/adma.201304138 · DOI · Paper page
  48. Lukatskaya, 2013, Cation Intercalation and High Volumetric Capacitance of Two-Dimensional Titanium Carbide, Science, 341, 1502, 10.1126/science.1241488 · DOI · Paper page
  49. Naguib, 2013, New Two-Dimensional Niobium and Vanadium Carbides as Promising Materials for Li-Ion Batteries, J. Am. Chem. Soc., 135, 15966, 10.1021/ja405735d · DOI · Paper page
  50. Mashtalir, 2013, Intercalation and Delamination of Layered Carbides and Carbonitrides, Nat. Commun., 4, 1716, 10.1038/ncomms2664 · DOI · Paper page
  51. Tang, 2012, Hollow Carbon Nanospheres with Superior Rate Capability for Sodium-Based Batteries, Adv. Energy Mater., 2, 873, 10.1002/aenm.201100691 · DOI · Paper page
  52. Cao, 2012, Sodium Ion Insertion in Hollow Carbon Nanowires for Battery Applications, Nano Lett., 12, 3783, 10.1021/nl3016957 · DOI · Paper page
  53. Thomas, 2000, Effect of Mechanical Grinding of Pitch-Based Carbon Fibers and Graphite on their Electrochemical Sodium Insertion Properties, Electrochim. Acta, 46, 39, 10.1016/S0013-4686(00)00542-9 · DOI
  54. Ding, 2013, Carbon Nanosheet Frameworks Derived from Peat Moss as High Performance Sodium Ion Battery Anodes, ACS Nano, 7, 11004, 10.1021/nn404640c · DOI · Paper page
  55. Zhou, 2014, Highly Disordered Carbon as a Superior Anode Material for Room-Temperature Sodium-Ion Batteries, ChemElectroChem, 1, 83, 10.1002/celc.201300071 · DOI · Paper page
  56. Wang, 2013, Nitrogen-Doped Porous Carbon Nanosheets as Low-Cost, High-Performance Anode Material for Sodium-Ion Batteries, ChemSusChem, 6, 56, 10.1002/cssc.201200680 · DOI · Paper page
  57. Fu, 2014, Nitrogen Doped Porous Carbon Fibres as Anode Materials for Sodium Ion Batteries with Excellent Rate Performance, Nanoscale, 6, 1384, 10.1039/C3NR05374A · DOI · Paper page
  58. Gui, 2013, Natural Cellulose Fiber as Substrate for Supercapacitor, ACS Nano, 7, 6037, 10.1021/nn401818t · DOI · Paper page
  59. Chen, 2013, Role of Mesoporosity in Cellulose Fibers for Paper-Based Fast Electrochemical Energy Storage, J. Mater. Chem. A, 1, 8201, 10.1039/c3ta10972k · doi:10.1039/c3ta10972k
  60. Li, 2012, Flexible Graphene-Based Lithium Ion Batteries with Ultrafast Charge and Discharge Rates, Proc. Natl. Acad. Sci. U.S.A., 109, 17360, 10.1073/pnas.1210072109 · DOI · Paper page
  61. Lee, 2013, Graphene-Nanotube-Iron Hierarchical Nanostructure as Lithium Ion Battery Anode, ACS Nano, 7, 4244
  62. Li, 2014, Monolithic Fe2O3/Graphene Hybrid for Highly Efficient Lithium Storage and Arsenic Removal, Carbon, 67, 500, 10.1016/j.carbon.2013.10.022 · DOI
  63. Pol, 2014, Spherical Carbon as a New High-Rate Anode for Sodium-ion Batteries, Electrochim. Acta, 127, 61, 10.1016/j.electacta.2014.01.132 · DOI
  64. Wenzel, 2011, Room-Temperature Sodium-Ion Batteries: Improving the Rate Capability of Carbon Anode Materials by Templating Strategies, Energy Environ. Sci., 4, 3342, 10.1039/c1ee01744f · DOI · Paper page
  65. Wang, 2013, Reduced Graphene Oxide with Superior Cycling Stability and Rate Capability for Sodium Storage, Carbon, 57, 202, 10.1016/j.carbon.2013.01.064 · DOI · Paper page
  66. Lin, 2009, US Demand for Organic and Conventional Fresh Fruits: The Roles of Income and Price, Sustainability, 1, 464, 10.3390/su1030464 · DOI
  67. Annadurai, 2003, Adsorption of Heavy Metals from Water Using Banana and Orange Peels, Water Sci. Technol., 47, 185, 10.2166/wst.2003.0049 · DOI · Paper page
  68. Annadurai, 2002, Use of Cellulose-Based Wastes for Adsorption of Dyes from Aqueous Solutions, J. Hazard. Mater., 92, 263, 10.1016/S0304-3894(02)00017-1 · DOI · Paper page
  69. Achak, 2009, Low Cost Biosorbent “Banana Peel” for the Removal of Phenolic Compounds from Olive Mill Wastewater: Kinetic and Equilibrium Studies, J. Hazard. Mater., 166, 117, 10.1016/j.jhazmat.2008.11.036 · DOI · Paper page
  70. Subramanian, 2007, Supercapacitors from Activated Carbon Derived from Banana Fibers, J. Phys. Chem. C, 111, 7527, 10.1021/jp067009t · DOI
  71. Lva, 2012, A Self-Template Synthesis of Hierarchical Porous Carbon Foams Based on Banana Peel for Supercapacitor Electrodes, J. Power Sources, 29, 152, 10.1016/j.jpowsour.2012.02.089 · DOI · Paper page
  72. Wu, 2011, Doped Graphene Sheets as Anode Materials with Superhigh Rate and Large Capacity for Lithium Ion Batteries, ACS Nano, 5, 5463, 10.1021/nn2006249 · DOI · Paper page
  73. Wang, 2011, Nitrogen-Doped Graphene Nanosheets with Excellent Lithium Storage Properties, J. Mater. Chem., 21, 5430, 10.1039/c1jm00049g · DOI · Paper page
  74. Emaga, 2008, Dietary Fibre Components and Pectin Chemical Features of Peels during Ripening in Banana and Plantain Varieties, Bioresour. Technol., 99, 4346, 10.1016/j.biortech.2007.08.030 · DOI · Paper page
  75. Titirici, 2007, A Direct Synthesis of Mesoporous Carbons with Bicontinuous Pore Morphology from Crude Plant Material by Hydrothermal Carbonization, Chem. Mater., 19, 4205, 10.1021/cm0707408 · DOI · Paper page
  76. Dahn, 1995, Mechanisms for Lithium Insertion in Carbonaceous Materials, Science, 270, 590, 10.1126/science.270.5236.590 · DOI · Paper page
  77. Portet, 2007, Electrochemical Performance of Carbon Onions, Nanodiamonds, Carbon Black and Multiwalled Nanotubes in Electrical Double Layer Capacitors, Carbon, 45, 2511, 10.1016/j.carbon.2007.08.024 · DOI · Paper page
  78. Wang, 2013, Functionalized N-Doped Interconnected Carbon Nanofibers as an Anode Material for Sodium-Ion Storage with Excellent Performance, Carbon, 55, 328, 10.1016/j.carbon.2012.12.072 · doi:10.1016/j.carbon.2012.12.072
  79. Stevens, 2000, High Capacity Anode Materials for Rechargeable Sodium-Ion Batteries, J. Electrochem. Soc., 147, 1271, 10.1149/1.1393348 · DOI · Paper page
  80. Wang, 1998, Lithium Insertion in Ball-Milled Graphite, J. Power Sources, 76, 1, 10.1016/S0378-7753(98)00114-1 · DOI
  81. Datta, 2014, Defective Graphene as a High-Capacity Anode Material for Na- and Ca-Ion Batteries, ACS Appl. Mater. Interfaces, 6, 1788, 10.1021/am404788e · DOI · Paper page
  82. Mukherjee, 2014, Defect-Induced Plating of Lithium Metal within Porous Graphene Networks, Nat. Commun., 5, 3710, 10.1038/ncomms4710 · DOI · Paper page
  83. Liu, 2013, Feasibility of Lithium Storage on Graphene and Its Derivatives, J. Phys. Chem. Lett., 4, 1737, 10.1021/jz400491b · doi:10.1021/jz400491b
  84. Zhou, 2012, First-Principles Study of Lithium Adsorption and Diffusion on Graphene with Point Defects, J. Phys. Chem. C, 116, 21780, 10.1021/jp304861d · DOI · Paper page
  85. Billaud, 1993, Electrochemical Synthesis of Binary Graphite-Lithium Intercalation Compounds, Mater. Res. Bull., 28, 477, 10.1016/0025-5408(93)90130-6 · doi:10.1016/0025-5408(93)90130-6
  86. Levi, 1997, Diffusion Coefficients of Lithium Ions during Intercalation into Graphite Derived from the Simultaneous Measurements and Modeling of Electrochemical Impedance and Potentiostatic Intermittent Titration Characteristics of Thin Graphite Electrodes, J. Phys. Chem. B, 10, 4641, 10.1021/jp9701911 · DOI · Paper page
  87. Banhart, 2011, Structural Defects in Graphene, ACS Nano, 5, 26, 10.1021/nn102598m · DOI · Paper page
  88. Carlsson, 2006, Structural, Electronic, and Chemical Properties of Nanoporous Graphene, Phys. Rev. Lett., 96, 046806, 10.1103/PhysRevLett.96.046806 · doi:10.1103/physrevlett.96.046806
  89. Alcantara, 2001, Carbon Black: A Promising Electrode Material for Sodium-Ion Batteries, Electrochem. Commun., 3, 639, 10.1016/S1388-2481(01)00244-2 · doi:10.1016/s1388-2481(01)00244-2
  90. Zhou, 2003, Lithium Storage in Ordered Mesoporous Carbon (CMK-3) with High Reversible Specific Energy Capacity and Good Cycling Performance, Adv. Mater., 15, 2107, 10.1002/adma.200306125 · DOI · Paper page
  91. Mukherjee, 2012, Nanostructured Electrodes for High-Power Lithium Ion Batteries, Nano Energy, 1, 518, 10.1016/j.nanoen.2012.04.001 · DOI · Paper page
  92. Kumar, 2011, Direct Synthesis of Lithium-Intercalated Graphene for Electrochemical Energy Storage Application, ACS Nano, 5, 4345, 10.1021/nn201527p · doi:10.1021/nn201527p
  93. Yoo, 2008, Large Reversible Li Storage of Graphene Nanosheet Families for Use in Rechargeable Lithium Ion Batteries, Nano Lett., 8, 2277, 10.1021/nl800957b · DOI · Paper page
  94. Yin, 2011, Assembly of Graphene Sheets into Hierarchical Structures for High-Performance Energy Storage, ACS Nano, 5, 3831, 10.1021/nn2001728 · DOI · Paper page
  95. Wang, 2014, Hybrid Carbon Nanotube and Graphene Nanostructures for Lithium Ion Battery Anodes, Nano Energy, 3, 113, 10.1016/j.nanoen.2013.10.005 · doi:10.1016/j.nanoen.2013.10.005
  96. Li, 2013, Structurally Tailored Graphene Nanosheets as Lithium Ion Battery Anodes: An Insight to Yield Exceptionally High Lithium Storage Performance, Nanoscale, 5, 12607, 10.1039/c3nr04823c · doi:10.1039/c3nr04823c
  97. Li, 2011, Vertically Aligned Carbon Nanotubes Grown on Graphene Paper as Electrodes in Lithium-Ion Batteries and Dye-Sensitized Solar Cells, Adv. Energy Mater., 1, 486, 10.1002/aenm.201100001 · DOI · Paper page
  98. Bhardwaj, 2010, Enhanced Electrochemical Lithium Storage by Graphene Nanoribbons, J. Am. Chem. Soc., 132, 12556, 10.1021/ja106162f · DOI · Paper page
  99. Fan, 2011, Nanographene-Constructed Carbon Nanofibers Grown on Graphene Sheets by Chemical Vapor Deposition: High-Performance Anode Materials for Lithium Ion Batteries, ACS Nano, 5, 2787, 10.1021/nn200195k · DOI · Paper page
  100. Hao, 2012, Monolithic Carbons with Tailored Crystallinity and Porous Structure as Lithium-Ion Anodes for Fundamental Understanding Their Rate Performance and Cycle Stability, J. Phys. Chem. C, 116, 10303, 10.1021/jp2124229 · doi:10.1021/jp2124229
  101. Guo, 2011, Soft-Templated Mesoporous Carbon-Carbon Nanotube Composites for High Performance Lithium-ion Batteries, Adv. Mater., 23, 4661, 10.1002/adma.201102032 · DOI · Paper page
  102. Chen, 2009, Carbon Nanotube Network Modified Carbon Fibre Paper for Li-Ion Batteries, Energy Environ. Sci., 2, 393, 10.1039/b816135f · doi:10.1039/b816135f
  103. Lee, 2005, Synthesis and Rate Performance of Monolithic Macroporous Carbon Electrodes for Lithium-Ion Secondary Batteries, Adv. Funct. Mater., 15, 547, 10.1002/adfm.200400186 · DOI · Paper page
  104. Chen, 2012, In Situ Formation of Hollow Graphitic Carbon Nanospheres in Electrospun Amorphous Carbon Nanofibers for High-Performance Li-Based Batteries, Nanoscale, 4, 6800, 10.1039/c2nr31557b · doi:10.1039/c2nr31557b
  105. Mukherjee, 2012, Photothermally Reduced Graphene as High-Power Anodes for Lithium-Ion Batteries, ACS Nano, 6, 7867, 10.1021/nn303145j · DOI · Paper page
  106. Qie, 2012, Nitrogen-Doped Porous Carbon Nanofiber Webs as Anodes for Lithium Ion Batteries with a Superhigh Capacity and Rate Capability, Adv. Mater., 24, 2047, 10.1002/adma.201104634 · DOI · Paper page

Cited by

See all 907

Metadata

Authors
Lotfabad, E. M., Ding, J., Cui, K., Kohandehghan, A., Kalisvaart, W. P., Hazelton, M., & Mitlin, D.
Venue
ACS Nano
Publisher
American Chemical Society (ACS)
Published
2014-06-06
Volume
8
Issue
7
Pages
7115-7129
ISSN
  • 1936-0851 (ISSN-L)
  • 1936-086X
DOI
10.1021/nn502045y
OpenAlex
W1966816561
Cited by
907
References
3
FWCI
46.52
Type
journal article
Language
en
Open access
closed
Licence

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.