The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
Efficient Electrocatalytic Oxygen Evolution on Amorphous Nickel–Cobalt Binary Oxide Nanoporous Layers
Abstract
Nanoporous Ni-Co binary oxide layers were electrochemically fabricated by deposition followed by anodization, which produced an amorphous layered structure that could act as an efficient electrocatalyst for water oxidation. The highly porous morphologies produced higher electrochemically active surface areas, while the amorphous structure supplied abundant defect sites for oxygen evolution. These Ni-rich (10-40 atom % Co) binary oxides have an increased active surface area (roughness factor up to 17), reduced charge transfer resistance, lowered overpotential (∼325 mV) that produced a 10 mA cm(-2) current density, and a decreased Tafel slope (∼39 mV decade(-1)). The present technique has a wide range of applications for the preparation of other binary or multiple-metals or metal oxides nanoporous films. Fabrication of nanoporous materials using this method could provide products useful for renewable energy production and storage applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Walter, M. G., Warren, E. L., McKone, J. R., Boettcher, S. W., Mi, Q., Santori, E. A., & Lewis, N. S. (2010) · Chemical Reviews · doi:10.1021/cr1002326 · Cited by 9,388
Benchmarking Heterogeneous Electrocatalysts for the Oxygen Evolution Reaction
McCrory, C. C. L., Jung, S., Peters, J. C., & Jaramillo, T. F. (2013) · Journal of the American Chemical Society · doi:10.1021/ja407115p · Cited by 7,026
Co3O4 nanocrystals on graphene as a synergistic catalyst for oxygen reduction reaction
Liang, Y., Li, Y., Wang, H., Zhou, J., Wang, J., Regier, T., & Dai, H. (2011) · Nature Materials · doi:10.1038/nmat3087 · Cited by 5,494
A Perovskite Oxide Optimized for Oxygen Evolution Catalysis from Molecular Orbital Principles
Suntivich, J., May, K. J., Gasteiger, H. A., Goodenough, J. B., & Shao-Horn, Y. (2011) · Science · doi:10.1126/science.1212858 · Cited by 5,441
Hench, L. L., & West, J. K. (1990) · Chemical Reviews · doi:10.1021/cr00099a003 · Cited by 4,450
In Situ Formation of an Oxygen-Evolving Catalyst in Neutral Water Containing Phosphate and Co 2+
Kanan, M. W., & Nocera, D. G. (2008) · Science · doi:10.1126/science.1162018 · Cited by 4,122
Lee, Y., Suntivich, J., May, K. J., Perry, E. E., & Shao-Horn, Y. (2012) · The Journal of Physical Chemistry Letters · doi:10.1021/jz2016507 · Cited by 3,534
An Advanced Ni–Fe Layered Double Hydroxide Electrocatalyst for Water Oxidation
Gong, M., Li, Y., Wang, H., Liang, Y., Wu, J. Z., Zhou, J., Wang, J., Regier, T., Wei, F., & Dai, H. (2013) · Journal of the American Chemical Society · doi:10.1021/ja4027715 · Cited by 2,837
An Investigation of Thin-Film Ni–Fe Oxide Catalysts for the Electrochemical Evolution of Oxygen
Louie, M. W., & Bell, A. T. (2013) · Journal of the American Chemical Society · doi:10.1021/ja405351s · Cited by 2,803
Double perovskites as a family of highly active catalysts for oxygen evolution in alkaline solution
Grimaud, A., May, K. J., Carlton, C. E., Lee, Y.-L., Risch, M., Hong, W. T., Zhou, J., & Shao-Horn, Y. (2013) · Nature Communications · doi:10.1038/ncomms3439 · Cited by 1,629
Cited by
Ultrathin metal–organic framework nanosheets for electrocatalytic oxygen evolution
Zhao, S., Wang, Y., Dong, J., He, C.-T., Yin, H., An, P., Zhao, K., Zhang, X., Gao, C., Zhang, L., et al. (2016) · Nature Energy · doi:10.1038/nenergy.2016.184 · Cited by 2,602
Transition‐Metal (Co, Ni, and Fe)‐Based Electrocatalysts for the Water Oxidation Reaction
Han, L., Dong, S., & Wang, E. (2016) · Advanced Materials · doi:10.1002/adma.201602270 · Cited by 1,769
Metallic Nickel Nitride Nanosheets Realizing Enhanced Electrochemical Water Oxidation
Xu, K., Chen, P., Li, X., Tong, Y., Ding, H., Wu, X., Chu, W., Peng, Z., Wu, C., & Xie, Y. (2015) · Journal of the American Chemical Society · doi:10.1021/ja5119495 · Cited by 1,115
Nanostructured catalysts for electrochemical water splitting: current state and prospects
Li, X., Hao, X., Abudula, A., & Guan, G. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta02334g · Cited by 1,079
Recent Progress on Multimetal Oxide Catalysts for the Oxygen Evolution Reaction
Kim, J. S., Kim, B., Kim, H., & Kang, K. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702774 · Cited by 940
Chen, D., Chen, C., Baiyee, Z. M., Shao, Z., & Ciucci, F. (2015) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00073 · Cited by 936
Mixed Metal Sulfides for Electrochemical Energy Storage and Conversion
Yu, X. Y., & (David) Lou, X. W. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701592 · Cited by 833
Tang, C., Wang, H., Wang, H., Zhang, Q., Tian, G., Nie, J., & Wei, F. (2015) · Advanced Materials · doi:10.1002/adma.201501901 · Cited by 691
Noble‐Metal‐Free Electrocatalysts for Oxygen Evolution
Lyu, F., Wang, Q., Choi, S. M., & Yin, Y. (2019) · Small · doi:10.1002/smll.201804201 · Cited by 533
Ďurovič, M., Hnát, J., & Bouzek, K. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.229708 · Cited by 436
Anion and Cation Modulation in Metal Compounds for Bifunctional Overall Water Splitting
Duan, J., Chen, S., Vasileff, A., & Qiao, S. Z. (2016) · ACS Nano · doi:10.1021/acsnano.6b04252 · Cited by 409
Jin, Y., Huang, S., Yue, X., Du, H., & Shen, P. K. (2018) · ACS Catalysis · doi:10.1021/acscatal.7b04226 · Cited by 359
Liu, W., Liu, H., Dang, L., Zhang, H., Wu, X., Yang, B., Li, Z., Zhang, X., Lei, L., & Jin, S. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201603904 · Cited by 357
Li, J., Huang, W., Wang, M., Xi, S., Meng, J., Zhao, K., Jin, J., Xu, W., Wang, Z., Liu, X., et al. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.8b02345 · Cited by 357
Li, Y., & Zhao, C. (2017) · ACS Catalysis · doi:10.1021/acscatal.6b03497 · Cited by 346
Bae, S., Kim, J., Randriamahazaka, H., Moon, S., Park, J., & Oh, I. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601492 · Cited by 324
Porous Nickel–Iron Oxide as a Highly Efficient Electrocatalyst for Oxygen Evolution Reaction
Qi, J., Zhang, W., Xiang, R., Liu, K., Wang, H., Chen, M., Han, Y., & Cao, R. (2015) · Advanced Science · doi:10.1002/advs.201500199 · Cited by 294
Zhang, W., Quan, B., Lee, C., Park, S.-K., Li, X., Choi, E., Diao, G., & Piao, Y. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am507014w · Cited by 288
Plevová, M., Hnát, J., & Bouzek, K. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.230072 · Cited by 278
Man, H.-W., Tsang, C.-S., Li, M. M.-J., Mo, J., Huang, B., Lee, L. Y. S., Leung, Y.-C., Wong, K.-Y., & Tsang, S. C. E. (2019) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2018.09.103 · Cited by 169
Yu, X., Zhang, S., Li, C., Zhu, C., Chen, Y., Gao, P., Qi, L., & Zhang, X. (2016) · Nanoscale · doi:10.1039/c6nr01867j · Cited by 165
Fu, S., Song, J., Zhu, C., Xu, G.-L., Amine, K., Sun, C., Li, X., Engelhard, M. H., Du, D., & Lin, Y. (2018) · Nano Energy · doi:10.1016/j.nanoen.2017.12.010 · Cited by 150
Božiček, B. L., Hreščak, J., Kušter, M., Kovač, J., Naglič, I., Markoli, B., Batič, B. Š., Šala, M., Drev, S., Marinko, Ž., et al. (2024) · Journal of Materials Science · doi:10.1007/s10853-024-09710-5 · Cited by 23
Metadata
- Authors
- Yang, Y., Fei, H., Ruan, G., Xiang, C., & Tour, J. M.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-08-22
- Volume
- 8
- Issue
- 9
- Pages
- 9518-9523
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2322699606
- Cited by
- 384
- References
- 33
- FWCI
- 13.97
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
