Fully Printed Flexible Fingerprint-like Three-Axis Tactile and Slip Force and Temperature Sensors for Artificial Skin
The DOI matches its Crossref record; 22 of the 22 references it cites were found in a registry or an index.
Abstract
A three-axis tactile force sensor that determines the touch and slip/friction force may advance artificial skin and robotic applications by fully imitating human skin. The ability to detect slip/friction and tactile forces simultaneously allows unknown objects to be held in robotic applications. However, the functionalities of flexible devices have been limited to a tactile force in one direction due to difficulties fabricating devices on flexible substrates. Here we demonstrate a fully printed fingerprint-like three-axis tactile force and temperature sensor for artificial skin applications. To achieve economic macroscale devices, these sensors are fabricated and integrated using only printing methods. Strain engineering enables the strain distribution to be detected upon applying a slip/friction force. By reading the strain difference at four integrated force sensors for a pixel, both the tactile and slip/friction forces can be analyzed simultaneously. As a proof of concept, the high sensitivity and selectivity for both force and temperature are demonstrated using a 3×3 array artificial skin that senses tactile, slip/friction, and temperature. Multifunctional sensing components for a flexible device are important advances for both practical applications and basic research in flexible electronics.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Conductive nanomaterial-filled polymers[212,213] are a promising candidate for flexible PTC temperature sensors, where the volume changes as the material progresses through the melting point of crystalline regions, thus affecting the resistance.[214]”
From Flexible Electronics and Devices as Human–Machine Interfaces for Medical Robotics (2022) · cites this paper as [213]
In the citing paper
“Wearable temperature and mechanical sensors (e.g., strain sensors, pressure sensors, and force sensors) have been integrated to realize wearable health and activity monitoring, human-interactive devices and multifunctional electronic skin.[47,65,80,172,196,197]”
From Nanomaterial-Enabled Wearable Sensors for Healthcare (2018) · cites this paper as [196]
Citations
Cites
Kim, D.-H., Lu, N., Ma, R., Kim, Y.-S., Kim, R.-H., Wang, S., Wu, J., Won, S. M., Tao, H., Islam, A., et al. (2011) · Science · doi:10.1126/science.1206157 · Cited by 4,836
Hammock, M. L., Chortos, A., Tee, B. C. ‐., Tok, J. B. ‐., & Bao, Z. (2013) · Advanced Materials · doi:10.1002/adma.201302240 · Cited by 2,396
Schwartz, G., Tee, B. C.-K., Mei, J., Appleton, A. L., Kim, D. H., Wang, H., & Bao, Z. (2013) · Nature Communications · doi:10.1038/ncomms2832 · Cited by 2,042
Someya, T., Sekitani, T., Iba, S., Kato, Y., Kawaguchi, H., & Sakurai, T. (2004) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0401918101 · Cited by 1,921
Johansson, R. S., & Westling, G. (1984) · Experimental Brain Research · doi:10.1007/bf00237997 · Cited by 1,703
A flexible and highly sensitive strain-gauge sensor using reversible interlocking of nanofibres
Pang, C., Lee, G.-Y., Kim, T.-I., Kim, S. M., Kim, H. N., Ahn, S.-H., & Suh, K.-Y. (2012) · Nature Materials · doi:10.1038/nmat3380 · Cited by 1,695
Multifunctional wearable devices for diagnosis and therapy of movement disorders
Son, D., Lee, J., Qiao, S., Ghaffari, R., Kim, J., Lee, J. E., Song, C., Kim, S. J., Lee, D. J., Jun, S. W., et al. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.38 · Cited by 1,462
Someya, T., Kato, Y., Sekitani, T., Iba, S., Noguchi, Y., Murase, Y., Kawaguchi, H., & Sakurai, T. (2005) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0502392102 · Cited by 1,389
Nanowire active-matrix circuitry for low-voltage macroscale artificial skin
Takei, K., Takahashi, T., Ho, J. C., Ko, H., Gillies, A. G., Leu, P. W., Fearing, R. S., & Javey, A. (2010) · Nature Materials · doi:10.1038/nmat2835 · Cited by 1,274
Self-citationUltrathin conformal devices for precise and continuous thermal characterization of human skin
Webb, R. C., Bonifas, A. P., Behnaz, A., Zhang, Y., Yu, K. J., Cheng, H., Shi, M., Bian, Z., Liu, Z., Kim, Y.-S., et al. (2013) · Nature Materials · doi:10.1038/nmat3755 · Cited by 1,229
Cited by
Items 201–300 of 350
Printed flexible mechanical sensors
Smocot, S., Zhang, Z., Zhang, L., Guo, S., & Cao, C. (2022) · Nanoscale · doi:10.1039/d2nr04015h · Cited by 24
Al-Qahtani, A. M., Ali, S., Khan, A., & Bermak, A. (2023) · Sensors · doi:10.3390/s23041869 · Cited by 28
“5 × 10−3 °C−1 PET Screen Printing PEDOT:PSS PDMS [45]”
InfluentialPolymer Microelectromechanical System-Integrated Flexible Sensors for Wearable Technologies
Fan, S., Meng, L., Li, D., Zheng, W., & Wang, X. (2018) · IEEE Sensors Journal · doi:10.1109/jsen.2018.2877747 · Cited by 25
“2877747 wearable devices [7]–[9], medical instruments [10], [11], robotics [12], [13], and e-skin products [14]–[16].”
BackgroundTemperature Sensors Based on Organic Field-Effect Transistors
Polena, J., Afzal, D., Ngai, J. H. L., & Li, Y. (2021) · Chemosensors · doi:10.3390/chemosensors10010012 · Cited by 26
“Furthermore, recent developments towards designing artificial skin, or electronic skin (e-skin), require accurate temperature monitoring as well as flexible systems with spatial resolution for practical application [15,16].”
BackgroundBiomimetic Flexible Sensors and Their Applications in Human Health Detection
Yu, H., Li, H., Sun, X., & Pan, L. (2023) · Biomimetics · doi:10.3390/biomimetics8030293 · Cited by 31
Very Thin, Macroscale, Flexible, Tactile Pressure Sensor Sheet
Wakabayashi, S., Arie, T., Akita, S., & Takei, K. (2020) · ACS Omega · doi:10.1021/acsomega.0c02337 · Cited by 25
Self-citationSmall‐Scale Biological and Artificial Multidimensional Sensors for 3D Sensing
Agarwal, K., Hwang, S., Bartnik, A., Buchele, N., Mishra, A., & Cho, J. (2018) · Small · doi:10.1002/smll.201801145 · Cited by 22
Gao, Z., Wang, C., Dong, Y., Yao, J., Mi, Q., Ge, D., Lu, Y. M., & Yu, H. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.149785 · Cited by 21
Anthropomorphic Soft Hand: Dexterity, Sensing, and Machine Learning
Wang, Y., Hao, T., Liu, Y., Xiao, H., Liu, S., & Zhu, H. (2024) · Actuators · doi:10.3390/act13030084 · Cited by 29
“…for fabricating multi-modal tactile sensors include integrating various sensing units [150,151], designing sensing arrays to decouple different types of signals [149,152], developing novel materials able to simultaneously sense multiple stimuli [153,154], and designing novel structures [143,148].”
BackgroundJeong, W., Kim, M., Ha, J., Zulkifli, N. A. B., Hong, J., Kim, C., & Lee, S. (2019) · RSC Advances · doi:10.1039/c8ra10467k · Cited by 20
Lee, H. M., Perumal, S., Kim, G. Y., Kim, J. C., Kim, Y., Kim, M. P., Ko, H., Rho, Y., & Cheong, I. W. (2020) · Polymer Chemistry · doi:10.1039/d0py00310g · Cited by 21
Suh, W., Ki, K., Kim, T. Y., Choi, H.-S., Lee, A., & Jeong, U. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c12924 · Cited by 20
Wearable sensors for monitoring vital signals in sports and health: progress and perspective
Zhao, J., Feng, S., Cao, X., & Zheng, H. (2024) · Sensor Review · doi:10.1108/sr-02-2024-0080 · Cited by 23
Customizable, Flexible Pressure, and Temperature Step Sensors with Human Skinlike Color
Kim, S., Oh, S., Jung, Y., Moon, H., & Lim, H. (2018) · ACS Omega · doi:10.1021/acsomega.7b01868 · Cited by 19
3D electronic and photonic structures as active biological interfaces
Wang, H., Sun, P., Yin, L., & Sheng, X. (2019) · InfoMat · doi:10.1002/inf2.12054 · Cited by 19
Ahmad, S., Rahman, K., Cheema, T. A., Shakeel, M., Khan, A., & Bermak, A. (2022) · Micromachines · doi:10.3390/mi13091419 · Cited by 20
Printed, wearable e-skin force sensor array
Sapra, S., Chakraborthy, A., Nuthalapati, S., Nag, A., Inglis, D. W., Mukhopadhyay, S. C., & Altinsoy, M. E. (2022) · Measurement · doi:10.1016/j.measurement.2022.112348 · Cited by 19
Zavanelli, N., Kwon, K., & Yeo, W. (2023) · IEEE Open Journal of Engineering in Medicine and Biology · doi:10.1109/ojemb.2023.3330290 · Cited by 21
Soft Monolithic Shielded Sensors to Measure Shear and Normal Forces for Local Slip Detection
Aksoy, B., Digumarti, K. M., & Shea, H. R. (2024) · Advanced Materials Technologies · doi:10.1002/admt.202400486 · Cited by 18
From Sensors to Care: How Robotic Skin Is Transforming Modern Healthcare—A Mini Review
Zhu, Y., Moyle, W., Hong, M., & Aw, K. C. (2025) · Sensors · doi:10.3390/s25092895 · Cited by 19
Mathematical Model and Experimental Design of Nanocomposite Proximity Sensors
Moheimani, R., Pasharavesh, A., Agarwal, M., & Dalir, H. (2020) · IEEE Access · doi:10.1109/access.2020.3017144 · Cited by 17
“For instance, strain sensors can detect body motion [7], [11], [12], tactile sensors enable to monitor three-axis handling/manipulation of objects [9], [13], [14], while proximity sensors avoid any possible accident of humans and robots to unknown obstacles [2], [3], [15].”
BackgroundHighly Stable Liquid–Solid Metal Contact Toward Multilayered Detachable Flexible Devices
Harada, S., Arie, T., Akita, S., & Takei, K. (2015) · Advanced Electronic Materials · doi:10.1002/aelm.201500080 · Cited by 17
Self-citationAn all-solution-processed tactile memory flexible device integrated with a NiO ReRAM
Kanao, K., Arie, T., Akita, S., & Takei, K. (2016) · Journal of Materials Chemistry C · doi:10.1039/c6tc03321k · Cited by 20
Self-citationBendable CMOS Digital and Analog Circuits Monolithically Integrated with a Temperature Sensor
Honda, W., Arie, T., Akita, S., & Takei, K. (2016) · Advanced Materials Technologies · doi:10.1002/admt.201600058 · Cited by 16
Self-citationHuman-interactive multi-functional electronic wallpaper integrated with sensors and memory
Kanao, K., Nakata, S., Arie, T., Akita, S., & Takei, K. (2017) · Materials Horizons · doi:10.1039/c7mh00401j · Cited by 16
Self-citationShi, J., Sun, B., Li, H., Xia, K., Zhang, X., Ding, G., Pan, T., & Yang, Z. (2018) · Flexible and Printed Electronics · doi:10.1088/2058-8585/aaf847 · Cited by 16
Large-Area Thermal Distribution Sensor Based on Multilayer Graphene Ink
Koskinen, T., Juntunen, T., & Tittonen, I. J. (2020) · Sensors · doi:10.3390/s20185188 · Cited by 17
Appiagyei, A. B., Banua, J., & Han, J. I. (2021) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2021.04.058 · Cited by 17
Beccai, L., Lucarotti, C., Totaro, M., & Taghavi, M. (2016) · Biosystems & biorobotics · doi:10.1007/978-3-319-46460-2_3 · Cited by 16
“One-Step” Preparation Process for the Flexible and Breathable Piezoelectric Sensor
Guo, Z., Sun, W., Yang, Z., Wu, X., Wu, Y., Zhang, Y., Lan, W., Liao, Y., Xing, W., & Liu, Y. (2023) · ACS Applied Electronic Materials · doi:10.1021/acsaelm.3c00497 · Cited by 16
Zhang, C., Wei, W., Li, Y., Li, X., Liu, Y., Wang, X., & Chen, S. (2024) · Advanced Materials Technologies · doi:10.1002/admt.202400149 · Cited by 15
Polymer-based wearable nano-composite sensors: a review
Tuli, A., & Singh, A. P. (2023) · International Journal of Polymer Analysis and Characterization · doi:10.1080/1023666x.2022.2161737 · Cited by 17
“for long-term monitoring of human health and can help us to diagnose a disease at an early stage.([102,103]) Figure 18.”
BackgroundInfluentialZhang, Z., Zhang, H., Zhang, Q., Zhao, X., Li, B., Zang, J., Zhao, X., & Zhang, T. (2023) · Micromachines · doi:10.3390/mi14030690 · Cited by 14
“This is because of the difference in thermal resistance and piezoresistive mechanisms [33], which have different degrees of influence on the resistance.”
BackgroundTouch Empowerment: Self‐Sustaining e‐Tattoo Thermoelectric System for Temperature Mapping
Almeida, M. A. S., Pires, A. L., Ramírez, J. L., Malik, S. B., de la Flor, S., Llobet, E., Pereira, A. T., & Pereira, A. M. (2024) · Advanced Science · doi:10.1002/advs.202403775 · Cited by 18
Surface-Property Recognition With Force Sensors for Stable Walking of Humanoid Robot
Bhattacharya, S., Luo, A., Maiti, T. K., Dutta, S., Ochi, Y., Miura-Mattausch, M., & Mattausch, H. J. (2019) · IEEE Access · doi:10.1109/access.2019.2945983 · Cited by 14
6.13 Additive Manufacturing of Multifunctional Nanocomposites and Composites
Farahani, R. D., Therriault, D., Dubé, M., Bodkhe, S., & Mahdavi, M. (2017) · Elsevier eBooks · doi:10.1016/b978-0-12-803581-8.10019-0 · Cited by 21
Fluid-based wearable sensors: a turning point in personalized healthcare
VURAL, B., Uludağ, İ., İNCE, B., Özyurt, C., ÖZTÜRK, F., & Sezgintürk, M. K. (2023) · TURKISH JOURNAL OF CHEMISTRY · doi:10.55730/1300-0527.3588 · Cited by 14
“Today, sensors that measure the heart rate [22], blood pressure [23], oxygen saturation [24], movements [25], respiratory rate [26], and body temperature [27] are extensively employed.”
BackgroundHigh performance, flexible CMOS circuits and sensors toward wearable healthcare applications
Takei, K. (2016) · Technical digest - International Electron Devices Meeting/Technical digest · doi:10.1109/iedm.2016.7838358 · Cited by 13
“Printed flexible temperature sensor [14] [15]”
Self-citationKwon, S.-G., Kang, J., Back, S., & Kang, B. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.0c03513 · Cited by 13
A Fabricated Force Glove That Measures Hand Forces during Activities of Daily Living
Austin, E. F., Kearney, C. P., Chacon, P. J., Winges, S. A., Acharya, P., & Choi, J. (2022) · Sensors · doi:10.3390/s22041330 · Cited by 13
“Fabrication of sensor gloves [10,11], electronic skins [12,13], and optical fingernail plethysmography color pressure sensors [14] have been undertaken with the proposed idea of capturing finger biometrics such as force and temperature.”
Hydrothermal synthesis of zinc oxide/PEDOT:PSS composite for flexible temperature sensor application
Aidit, S. N., Rezali, F. A. M., Nor, N. H. M., Yusoff, N., Ya, M. L., Hatta, S. F. W. M., & Soin, N. (2023) · Flexible and Printed Electronics · doi:10.1088/2058-8585/acd06e · Cited by 12
Tseng, S., Huang, J. W., Lee, C., & Kuo, C.-C. (2025) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2025.179928 · Cited by 12
Cha, Y., Seo, B., Chung, M., Kim, B. S. Y., Choi, W., & Park, W. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c24420 · Cited by 12
Zhu, M., Cao, J., Wei, X., He, Y., Li, A., Xu, X., Ali, M. U., Yan, L., & Meng, H. (2018) · Applied Physics Letters · doi:10.1063/1.5034047 · Cited by 12
Chandel, A., Kumar, V., Choudhary, J., Upadhyay, P., Baidya, D., Bhattacharjee, M., & Chakma, S. (2023) · ACS Applied Engineering Materials · doi:10.1021/acsaenm.3c00574 · Cited by 11
Zhao, X., Xu, X., Lu, Y., & Sun, Q. (2024) · ACS Applied Nano Materials · doi:10.1021/acsanm.4c00074 · Cited by 11
Fully Printed Temperature Sensor Array Comprising 625 60×60 µm2 pixels
Huber, R., Eizaguirre, S., Mescher, H., Willig, C., Zhang, Q., & Lemmer, U. (2022) · Advanced Sensor Research · doi:10.1002/adsr.202200031 · Cited by 13
Liu, Z., Yuan, R., Wang, S., Liao, W., Yan, L., Hu, R., Chen, J., & Yu, L. (2025) · Nano Letters · doi:10.1021/acs.nanolett.4c05235 · Cited by 12
Advances in electronic skin research: a bibliometric analysis
Xu, S., Yu, X., Chen, J., & Jing, Y. (2023) · Frontiers in Materials · doi:10.3389/fmats.2023.1188662 · Cited by 10
“, 2020), and temperature sensors (Harada et al., 2014) to simulate the skin’s transmission of physical parameters such as temperature and pressure (Zhao et al.”
BackgroundSordo, G., & Lorenzelli, L. (2016) · Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS · doi:10.1109/dtip.2016.7514837 · Cited by 10
“In a completely different context a triaxial force sensor has been integrated in a flexible electronic skin for robotics application [2].”
BackgroundLiu, H., Pan, H., Wang, J., Wang, J., Hou, Q., Wang, R., Lang, T., Cui, B., Xu, J., Quan, J., et al. (2023) · IEEE Sensors Journal · doi:10.1109/jsen.2023.3297574 · Cited by 9
“structure [10], [13], [14], [15], [16], for example, the stacking of multilayer structures, which often result in complex fabrication processes and high assembly accuracy requirements, is not conducive to the detection of force and the conversion of electrical signals.”
BackgroundAir-Chamber-Based Soft Six-Axis Force/Torque Sensor for Human–Robot Interaction
Huo, J., Ru, H., Yang, B., Chen, X., Li, X., & Huang, J. (2023) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2023.3338712 · Cited by 9
“…have been investigated to develop soft, compatible, and multidimensional force sensors with traditional sensing technologies, such as resistance strain gauges [11], [12], piezoelectric [13], [14], [15], capacitive [16], [17], [18], photoelectric [19], and soft magnetic technologies [20], [21].”
BackgroundFlexible Integrated Air Pressure Sensors for Monitoring Positive and Negative Pressure Distribution
Xuan, Y., Uchiyama, T., Ura, H., Hagiwara, S., Kato, H., Sarkar, S. K., & Takei, K. (2024) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.4c11810 · Cited by 9
Self-citationZeng, B.-Q., Li, T., Tang, X., Roy, V. A. L., & Sun, Q.-J. (2025) · Materials Today Physics · doi:10.1016/j.mtphys.2025.101804 · Cited by 16
Secondary embossing method for the capsulation of high-sensitive flexible piezoresistive sensors
Bai, X., Du, Y., Gai, C., Guo, Y., Liu, Y., Huang, Y., Xu, H. J., Wu, D., & Sun, J. (2022) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2021.113356 · Cited by 9
Waterproof Design of Soft Multi-Directional Force Sensor for Underwater Robotic Applications
Cross, L. B., Subad, R. A. S. I., Saikot, M. M. H., & Park, K. (2022) · Applied Mechanics · doi:10.3390/applmech3030042 · Cited by 9
“However, force interactions in this study were limited to one-directional movement due to the challenges imposed on fabricating the devices on flexible substrates [17].”
BackgroundFlexible Temperature Sensor Array Based on PEDOT:PSS Inkjet Printing
Wu, S., Hu, Z., Jiang, N., Zhai, J., Liu, Y., Wang, Z., Kang, C., & Wang, Y. (2024) · IEEE Sensors Journal · doi:10.1109/jsen.2024.3407790 · Cited by 8
“…in arrays on stretchable polyurethane substrates of size 2 × 3 cm 2 , and the temperature sensitivity can be 0.06%/ C in the range of 35 C–45 C. Harada et al. [31] screen-printed strain sensors of AgNP-CNT films and temperature sensor arrays of CNT-PEDOT:PSS films on 8 × 8 cm 2 PET substrate.”
BackgroundInfluentialGao, W., Bai, Y., Yang, Y., Jia, L., Mi, Y., Cui, W., Liu, D., Shakoor, A., Zhao, L., Li, J., et al. (2024) · Applied Physics Reviews · doi:10.1063/5.0211141 · Cited by 8
The development and characterisation of 3D-printed multi-material thermistor
Cicek, U. I., Southee, D. J., & Johnson, A. A. (2024) · Additive manufacturing · doi:10.1016/j.addma.2024.104510 · Cited by 13
Opportunities for nanomaterials in more sustainable aviation
Pendashteh, A., Mikhalchan, A., Varela, T. B., & Vilatela, J. J. (2024) · Discover Nano · doi:10.1186/s11671-024-04087-5 · Cited by 12
Innovations in wearable biosensors: A pathway to 24/7 personalized healthcare
Singh, I., Kumar, S., & Koh, J. (2025) · Measurement · doi:10.1016/j.measurement.2025.117938 · Cited by 12
Han, H., Kim, H., Cho, S., Lee, D., Moon, J.-W., Kim, C.-M., Ha, J., Jung, Y., Oh, Y. S., Choi, J., et al. (2025) · npj Flexible Electronics · doi:10.1038/s41528-025-00479-4 · Cited by 13
Lee, H. B., Kim, S. W., Jeong, H. Y., Yang, Y. J., Park, S. H., Kang, C. U., & Kim, H. B. (2026) · Additive manufacturing · doi:10.1016/j.addma.2026.105080 · Cited by 8
Wearable Sensors for Health Monitoring
Abreu, C., Bédard, C., Lourme, J.-C., & Piro, B. (2026) · Biosensors · doi:10.3390/bios16020093 · Cited by 14
“Wearable temperature sensors are also crucial in electronic skin technologies and are frequently investigated alongside other sensing systems aimed at advancing industrial and social robotics [49,50].”
Liu, Q., Peng, Z., Sun, C., & Yang, H. (2026) · FlexMat. · doi:10.1002/flm2.70053 · Cited by 12
Accessorizing Quadrupedal Robots with Wearable Electronics
Kim, M. S., Belkadi, D., Mayer, H. S., Tong, K., Faruqi, M. K., Hassan, K. I., Kim, J. M., Babatain, W., Fahad, H. M., & Hussain, M. M. (2024) · Advanced Intelligent Systems · doi:10.1002/aisy.202300633 · Cited by 8
Dontu, S., Kanhere, E. V., Stalin, T., Dharmawan, A. G., Hegde, C., Su, J., Chen, X., Magdassi, S., Soh, G. S., & y Alvarado, P. V. (2024) · Frontiers in Robotics and AI · doi:10.3389/frobt.2024.1356692 · Cited by 8
Evolution of the Seebeck effect in nanoparticle-percolated networks under applied strain
Xin, Y., Nesser, H., Zhou, J., & Lubineau, G. (2022) · Applied Materials Today · doi:10.1016/j.apmt.2022.101503 · Cited by 8
Albeltagi, A., Tolvanen, J., Bhalerao, S. R., & Hannu, J. (2024) · Macromolecular Materials and Engineering · doi:10.1002/mame.202300379 · Cited by 7
Large-Area High-Resolution Skin-Inspired Flexible Tactile Sensor for Robotic Electronic Skin
Li, Y., Cheng, P., Hong, J., Wang, Y., Wang, X., Guo, L., & Liu, J. (2025) · ACS Applied Electronic Materials · doi:10.1021/acsaelm.5c01200 · Cited by 7
Tariq, A., Behravesh, A. H., & Rizvi, G. M. (2023) · Engineering Research Express · doi:10.1088/2631-8695/acebb9 · Cited by 9
“This devicewas efficient inmeasuring three-axis tactile forces and friction in addition to temperature variation [164].”
BackgroundE-textile based wearable thermometer from WS 2 -quantum dots
Abid, A., Sehrawat, P., Julien, C. M., & Islam, S. S. (2021) · Nanotechnology · doi:10.1088/1361-6528/abfe8f · Cited by 7
Intelligent Wearable Electronics: A New Paradigm in Smart Electronics
Matthew, R., Dutta, J., Maheswar, R., & Ahmed, K. (2021) · EAI/Springer Innovations in Communication and Computing · doi:10.1007/978-3-030-70183-3_7 · Cited by 10
Wang, Y., Zheng, Y., Zhao, K., Wu, S., Ju, B., Zhang, S., & Niu, W. (2021) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.1c03981 · Cited by 7
Dual mode pressure sensing for prosthetic interfaces
Rossi, M., Nardello, M., Lorenzelli, L., & Brunelli, D. (2017) · International Workshop on Advances in Sensors and Interfaces (IWASI) · doi:10.1109/iwasi.2017.7974229 · Cited by 7
“~other approach is to use solutions developed In the robotic community, like the synthetic skin [16], to be integrated into prosthesis's sockets exploiting the flexibility, sensitivity and spatial resolution provided [17].”
MethodJung, K., Kim, J., Park, B.-G., Lee, C.-J., Sung, H.-J., & Jung, S. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.03.171 · Cited by 7
Conversion of eggshell wastes to multifunctional sensing layer for wearable health monitoring
Lee, M. (2025) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2025.117052 · Cited by 6
Portable embedded systems for prosthetic interface stress mapping of lower limbs amputees
Rossi, M., Andrea, R., Lorenzelli, L., & Brunelli, D. (2016) · Proceedings of IEEE Sensors/Proceedings of IEEE Sensors ... · doi:10.1109/icsens.2016.7808542 · Cited by 6
“Recently, solutions developed by the robotic community, namely smart synthetic skin, have been considered promising to be integrated into prosthesis’s sockets thanks to the intrinsic flexibility, sensitivity and spatial resolution provided [9].”
BackgroundAn extremely highly selective flexible compliant tactile touch sensor sheet
Nakata, S., Kanao, K., Harada, S., Arie, T., Akita, S., & Takei, K. (2016) · physica status solidi (a) · doi:10.1002/pssa.201600078 · Cited by 6
Self-citationUltraconformable organic devices
Ferrari, L. M., Taccola, S., Barsotti, J., Mattoli, V., & Greco, F. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-818890-3.00015-1 · Cited by 7
Wearable and Fexible Sensor Sheets toward Periodic Health Monitoring
Takei, K. (2015) · Smart sensors, measurement and instrumentation · doi:10.1007/978-3-319-18191-2_7 · Cited by 6
“Figures 6a and 6b show examples of three-axis force measurements integrated with strain and temperature sensors fabricated by a full printing method [29].”
MethodSelf-citationZhang, J., Xu, C., Li, J., Li, J., Zhang, S., & Wang, C. (2023) · Vacuum · doi:10.1016/j.vacuum.2023.111937 · Cited by 5
Temperature sensing properties of a flexible organic single-crystal field-effect transistor
An, Y., & Wang, H. (2023) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-023-10090-w · Cited by 5
Shi, G., Lowe, S. E., Zhong, Y. L., & Zhao, H. (2019) · Elsevier eBooks · doi:10.1016/b978-0-08-102637-3.00008-5 · Cited by 6
Multi-functional Smart Skin for Multi-dimensional Perception for Humanoid Robots
Dai, Y., & Gao, S. (2020) · IEEE International Conference on Flexible and Printable Sensors and Systems (FLEPS) · doi:10.1109/fleps49123.2020.9239596 · Cited by 5
“To enable humanoid robots to provide advanced services, using human skininspired artificial smart skin for robots to help them interact with users and perceive environmental stimuli has received increased attention in recent years [7-10].”
BackgroundStructure Analysis and Decoupling Research of a Novel Flexible Tactile Sensor Array
Wang, F., Song, Y., Zhang, Z., & Wanli, C. (2015) · Journal of Sensors · doi:10.1155/2015/476403 · Cited by 5
“[12] demonstrated a fully printed fingerprintlike three-axis tactile force and temperature sensor for artificial skin applications.”
BackgroundNanomaterials for soft wearable electronics
Liu, Y., & Zhu, Y. (2022) · Elsevier eBooks · doi:10.1016/b978-0-12-822425-0.00076-2 · Cited by 5
3D-printed polymer composites in wearable sensors: A review of techniques and applications
Fakhri, V., Sheikhzade, M. H., Dare, M. T., Alikarami, N., Jafari, A., & Khonakdar, H. A. (2026) · Materials Today Chemistry · doi:10.1016/j.mtchem.2026.103730 · Cited by 4
Novel PTC Composites for Temperature Sensors (and Related Applications)
Setnescu, R., & Lungulescu, E.-M. (2023) · IntechOpen eBooks · doi:10.5772/intechopen.110358 · Cited by 5
FBG-Based Methods for Monitoring Critical Slip Point During Flexible Fingers Clamping
Hou, Q., Fu, Y., Luo, M., Lu, C., Li, G., & Sun, L. Q. (2023) · IEEE Sensors Journal · doi:10.1109/jsen.2023.3316280 · Cited by 4
“Harada et al. [12] developed a 3 × 3 arrays three-axis tactile sensor (8 × 8 cm 2 ) , which integrated four strain sensors with one temperature sensor to solve the cross-sensing among the tangential force, normal force, and temperature.”
BackgroundFlexible fully printed temperature sensor based on PVC/CB composite
Xiao, Y., Jiang, S., Zhang, W., & Li, Y. (2020) · International Conference on Mechanical Engineering and Automation Science (ICMEAS) · doi:10.1109/icmeas51739.2020.00057 · Cited by 4
Robot Tactile Data Classification Method Using Spiking Neural Network
Yang, J., Ji, X., Li, S., Dong, H., Liu, T., Zhou, X., & Yu, S. (2021) · China Automation Congress (CAC) · doi:10.1109/cac53003.2021.9728022 · Cited by 6
Wireless Sensor Networks - Design, Applications and Challenges
Sen, J., Yi, M., Niu, F., & Wu, H. (2023) · IntechOpen eBooks · doi:10.5772/intechopen.104033 · Cited by 4
Fabrication of Three-dimensional Conductive Structures Using Direct Ink Writing
Yang, Z., Yu, H., Zhou, P., Wang, J., & Liu, L. (2017) · IEEE International Conference on Cyber Technology in Automation, Control, and Intelligent Systems · doi:10.1109/cyber.2017.8446374 · Cited by 4
“Recently, the inkjet printing technology about functional materials and optoelectronic devices has shown its great potential of research and application, such as humidity sensor [3], gas sensor [4], temperature sensor [5], strain sensor [6, 7].”
BackgroundDual Mode Pressure Sensing for Lower-Limb Prosthetic Interface
Rossi, M., Nardello, M., Lorenzelli, L., & Brunelli, D. (2017) · EUROSENSORS Conference (EUROSENSORS) · doi:10.3390/proceedings1040593 · Cited by 4
“They started as simple sensing wireless body area networks [6], designed for postural rehabilitation [7] or remote rehabilitation [8] and today, prototypes tried to integrate synthetic skin [9] into prosthesis’s sockets exploiting the flexibility, sensitivity and spatial resolution provided [10].”
Taheri, M., Ponnambalam, K., Shboul, A. A., Ketabi, M., & Deen, M. J. (2025) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2025.116693 · Cited by 3
Cui, L., Wang, G., Zhao, S., Dang, M., Wang, W., Yin, J., & Zhu, J. G. (2025) · Science China Materials · doi:10.1007/s40843-025-3383-4 · Cited by 3
“In contrast, PET (~0.24 W mK − 1 ) and PDMS (~0.15 W mK − 1 ) have lower thermal conductivities, which enable them to better confine optically converted heat within the AgNPs nanofilms [45].”
InfluentialWon, T. K., Lee, S. Y., Back, S. H., Cui, C., & Ahn, D. J. (2025) · Nano Letters · doi:10.1021/acs.nanolett.5c01422 · Cited by 3
Material and Structural Innovations for High-Performance Flexible Triaxial Force Sensors: A Review
Wang, X., Huang, J., Tan, B., Long, H., Li, E., & Qin, Y. (2025) · IEEE Sensors Journal · doi:10.1109/jsen.2025.3580731 · Cited by 4
“Similar issues arise with conductive metals like silver nanoparticles and titanium alloys [66], which are also brittle and not ideal for sensitive elements in flexible triaxial force sensors.”
InfluentialOut-of-Plane Flexible Electronic Whisker Array
Wakabayashi, S., Yamaguchi, T., Arie, T., Akita, S., & Takei, K. (2020) · IEEE International Conference on Micro Electro Mechanical Systems (MEMS) · doi:10.1109/mems46641.2020.9056244 · Cited by 3
“However, flexible sensors reported previously have mainly focuses on strain [1], temperature [2], tactile pressure [3, 4], and chemical contents [5] etc.”
BackgroundSelf-citation
Metadata
- Authors
- Harada, S., Kanao, K., Yamamoto, Y., Arie, T., Akita, S., & Takei, K.
- Affiliations
- Osaka Prefecture University (JP)
- Corresponding author
- Takei, Kuniharu
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-12-05
- Volume
- 8
- Issue
- 12
- Pages
- 12851-12857
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2323521842
- Semantic Scholar
- 1a37cf2c71d3724a6337de55ad55ec3f30a8d478
- Cited by
- 350
- References
- 22
- Citations by year
- 2026: 12 · 2025: 23 · 2024: 35 · 2023: 37 · 2022: 35 · 2021: 40 · 2020: 37 · 2019: 37 · 2018: 30 · 2017: 30 · 2016: 24 · 2015: 10
- FWCI
- 11.07
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- ACS Nano (publishedVersion)
- PubMed (publishedVersion)
- Funders
- Mazda Foundation
- Japan Society for the Promotion of Science (26630164, 26709026)
- Tateishi Science and Technology Foundation
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › Advanced Sensor and Energy Harvesting Materials
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Nanomaterials and Printing Technologies
- Physical Sciences › Materials Science › Surfaces, Coatings and Films › Nanofabrication and Lithography Techniques
- Keywords
- artificial skin, temperature sensing, three-axis force sensor, printed electronics, flexible electronics, strain engineering, robotic grasping
- MeSH terms
- Dermatoglyphics, Robotics, Temperature, Touch, Friction, Skin, Artificial, Electrical Equipment and Supplies
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.