The DOI matches its Crossref record; 22 of the 22 references it cites were found in a registry or an index.
Fully Printed Flexible Fingerprint-like Three-Axis Tactile and Slip Force and Temperature Sensors for Artificial Skin
Abstract
A three-axis tactile force sensor that determines the touch and slip/friction force may advance artificial skin and robotic applications by fully imitating human skin. The ability to detect slip/friction and tactile forces simultaneously allows unknown objects to be held in robotic applications. However, the functionalities of flexible devices have been limited to a tactile force in one direction due to difficulties fabricating devices on flexible substrates. Here we demonstrate a fully printed fingerprint-like three-axis tactile force and temperature sensor for artificial skin applications. To achieve economic macroscale devices, these sensors are fabricated and integrated using only printing methods. Strain engineering enables the strain distribution to be detected upon applying a slip/friction force. By reading the strain difference at four integrated force sensors for a pixel, both the tactile and slip/friction forces can be analyzed simultaneously. As a proof of concept, the high sensitivity and selectivity for both force and temperature are demonstrated using a 3×3 array artificial skin that senses tactile, slip/friction, and temperature. Multifunctional sensing components for a flexible device are important advances for both practical applications and basic research in flexible electronics.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Conductive nanomaterial-filled polymers[212,213] are a promising candidate for flexible PTC temperature sensors, where the volume changes as the material progresses through the melting point of crystalline regions, thus affecting the resistance.[214]”
From Flexible Electronics and Devices as Human–Machine Interfaces for Medical Robotics (2022) · cites this paper as [213]
In the citing paper
“Wearable temperature and mechanical sensors (e.g., strain sensors, pressure sensors, and force sensors) have been integrated to realize wearable health and activity monitoring, human-interactive devices and multifunctional electronic skin.[47,65,80,172,196,197]”
From Nanomaterial-Enabled Wearable Sensors for Healthcare (2018) · cites this paper as [196]
Citations
Cites
Kim, D.-H., Lu, N., Ma, R., Kim, Y.-S., Kim, R.-H., Wang, S., Wu, J., Won, S. M., Tao, H., Islam, A., et al. (2011) · Science · doi:10.1126/science.1206157 · Cited by 4,836
Hammock, M. L., Chortos, A., Tee, B. C. ‐., Tok, J. B. ‐., & Bao, Z. (2013) · Advanced Materials · doi:10.1002/adma.201302240 · Cited by 2,396
Schwartz, G., Tee, B. C.-K., Mei, J., Appleton, A. L., Kim, D. H., Wang, H., & Bao, Z. (2013) · Nature Communications · doi:10.1038/ncomms2832 · Cited by 2,042
Someya, T., Sekitani, T., Iba, S., Kato, Y., Kawaguchi, H., & Sakurai, T. (2004) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0401918101 · Cited by 1,921
Johansson, R. S., & Westling, G. (1984) · Experimental Brain Research · doi:10.1007/bf00237997 · Cited by 1,703
A flexible and highly sensitive strain-gauge sensor using reversible interlocking of nanofibres
Pang, C., Lee, G.-Y., Kim, T.-I., Kim, S. M., Kim, H. N., Ahn, S.-H., & Suh, K.-Y. (2012) · Nature Materials · doi:10.1038/nmat3380 · Cited by 1,695
Multifunctional wearable devices for diagnosis and therapy of movement disorders
Son, D., Lee, J., Qiao, S., Ghaffari, R., Kim, J., Lee, J. E., Song, C., Kim, S. J., Lee, D. J., Jun, S. W., et al. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.38 · Cited by 1,462
Someya, T., Kato, Y., Sekitani, T., Iba, S., Noguchi, Y., Murase, Y., Kawaguchi, H., & Sakurai, T. (2005) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0502392102 · Cited by 1,389
Nanowire active-matrix circuitry for low-voltage macroscale artificial skin
Takei, K., Takahashi, T., Ho, J. C., Ko, H., Gillies, A. G., Leu, P. W., Fearing, R. S., & Javey, A. (2010) · Nature Materials · doi:10.1038/nmat2835 · Cited by 1,274
Self-citationUltrathin conformal devices for precise and continuous thermal characterization of human skin
Webb, R. C., Bonifas, A. P., Behnaz, A., Zhang, Y., Yu, K. J., Cheng, H., Shi, M., Bian, Z., Liu, Z., Kim, Y.-S., et al. (2013) · Nature Materials · doi:10.1038/nmat3755 · Cited by 1,229
Cited by
Stretchable, Skin-Mountable, and Wearable Strain Sensors and Their Potential Applications: A Review
Amjadi, M., Kyung, K., Park, I., & Sitti, M. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201504755 · Cited by 3,202
Trung, T. Q., & Lee, N. (2016) · Advanced Materials · doi:10.1002/adma.201504244 · Cited by 2,160
Advanced Carbon for Flexible and Wearable Electronics
Wang, C., Xia, K., Wang, H., Liang, X., Yin, Z., & Zhang, Y. (2019) · Advanced Materials · doi:10.1002/adma.201801072 · Cited by 1,300
Flexible Sensing Electronics for Wearable/Attachable Health Monitoring
Wang, X., Liu, Z., & Zhang, T. (2017) · Small · doi:10.1002/smll.201602790 · Cited by 1,075
Recent Progress in Electronic Skin
Wang, X., Dong, L., Zhang, H., Yu, R., Pan, C., & Wang, Z. L. (2015) · Advanced Science · doi:10.1002/advs.201500169 · Cited by 976
Trung, T. Q., Ramasundaram, S., Hwang, B., & Lee, N. (2016) · Advanced Materials · doi:10.1002/adma.201504441 · Cited by 870
Recent Progress in Materials and Devices toward Printable and Flexible Sensors
Rim, Y. S., Bae, S., Chen, H., De Marco, N., & Yang, Y. (2016) · Advanced Materials · doi:10.1002/adma.201505118 · Cited by 771
Toward Perceptive Soft Robots: Progress and Challenges
Wang, H., Totaro, M., & Beccai, L. (2018) · Advanced Science · doi:10.1002/advs.201800541 · Cited by 753
Flexible Electronics and Devices as Human–Machine Interfaces for Medical Robotics
Heng, W., Solomon, S., & Gao, W. (2022) · Advanced Materials · doi:10.1002/adma.202107902 · Cited by 609
Multifunctional Skin‐Inspired Flexible Sensor Systems for Wearable Electronics
Xu, K., Lu, Y., & Takei, K. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201800628 · Cited by 602
Self-citationNanomaterial-Enabled Wearable Sensors for Healthcare
Yao, S., Swetha, P., & Zhu, Y. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201700889 · Cited by 576
Emerging flexible and wearable physical sensing platforms for healthcare and biomedical applications
Kenry, Yeo, J. C., & Lim, C. T. (2016) · Microsystems & Nanoengineering · doi:10.1038/micronano.2016.43 · Cited by 550
Inorganic nanomaterials for printed electronics: a review
Wu, W. (2017) · Nanoscale · doi:10.1039/c7nr01604b · Cited by 522
Lei, Z., & Wu, P. (2018) · Nature Communications · doi:10.1038/s41467-018-03456-w · Cited by 518
Graphene-based wearable piezoresistive physical sensors
Zheng, Q., Lee, J.-H., Shen, X., Chen, X., & Kim, J.-K. (2020) · Materials Today · doi:10.1016/j.mattod.2019.12.004 · Cited by 486
Sensitive Wearable Temperature Sensor with Seamless Monolithic Integration
Shin, J., Jeong, B., Kim, J., Nam, V. B., Yoon, Y., Jung, J., Hong, S., Lee, H., Eom, H., Yeo, J., et al. (2020) · Advanced Materials · doi:10.1002/adma.201905527 · Cited by 449
Zhao, S., Li, J., Cao, D., Zhang, G., Li, J., Li, K., Yang, Y., Wang, W., Jin, Y., Sun, R., et al. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b13800 · Cited by 443
Organic field-effect transistor-based flexible sensors
Yuvaraja, S., Nawaz, A., Liu, Q., Dubal, D., Surya, S. G., Salama, K. N., & Sonar, P. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00811j · Cited by 386
Reviews of wearable healthcare systems: Materials, devices and system integration
Lou, Z., Wang, L., Jiang, K., Wei, Z., & Shen, G. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2019.100523 · Cited by 385
Yao, S., Ren, P., Song, R., Liu, Y., Huang, Q., Dong, J., O'Connor, B. T., & Zhu, Y. (2020) · Advanced Materials · doi:10.1002/adma.201902343 · Cited by 324
A Low‐Operating‐Power and Flexible Active‐Matrix Organic‐Transistor Temperature‐Sensor Array
Ren, X., Pei, K., Peng, B., Zhang, Z., Wang, Z., Wang, X., & Chan, P. K. L. (2016) · Advanced Materials · doi:10.1002/adma.201600040 · Cited by 320
Wang, Y.-F., Sekine, T., Takeda, Y., Yokosawa, K., Matsui, H., Kumaki, D., Shiba, T., Nishikawa, T., & Tokito, S. (2020) · Scientific Reports · doi:10.1038/s41598-020-59432-2 · Cited by 316
Wu, R., Ma, L., Hou, C., Meng, Z., Guo, W., Yu, W., Yu, R., Hu, F., & Liu, X. Y. (2019) · Small · doi:10.1002/smll.201901558 · Cited by 300
Su, Y., Ma, C., Chen, J., Wu, H., Luo, W., Peng, Y., Luo, Z., Li, L., Tan, Y., Omisore, O. M., et al. (2020) · Nanoscale Research Letters · doi:10.1186/s11671-020-03428-4 · Cited by 287
“d Schematic for each layer of the e-skin device [132].”
BackgroundAn All-Silk-Derived Dual-Mode E-skin for Simultaneous Temperature–Pressure Detection
Wang, C., Xia, K., Zhang, M., Jian, M., & Zhang, Y. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b13356 · Cited by 277
A Highly Stretchable ZnO@Fiber‐Based Multifunctional Nanosensor for Strain/Temperature/UV Detection
Liao, X., Liao, Q., Zhang, Z., Yan, X., Liang, Q., Wang, Q., Li, M., & Zhang, Y. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201505223 · Cited by 275
Novel Tactile Sensor Technology and Smart Tactile Sensing Systems: A Review
Zou, L., Ge, C., Wang, Z., Cretu, E., & Li, X. (2017) · Sensors · doi:10.3390/s17112653 · Cited by 271
“The growth of robotic applications in unstructured environments has created a pressing need for smart tactile sensing systems with advanced tactile materials and fabrication technologies.”
BackgroundShi, G., Araby, S., Gibson, C. T., Meng, Q., Zhu, S., & Ma, J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201706705 · Cited by 267
Liu, G., Tan, Q., Kou, H., Zhang, L., Wang, J., Lv, W., Dong, H., & Xiong, J. (2018) · Sensors · doi:10.3390/s18051400 · Cited by 260
“25% ◦C−1 1~2 s [27] single-walled carbon nanotubes (SWCNT) 0–80 Yes / / [28] Ag 20–60 Yes 0.”
Khan, S., Ali, S., & Bermak, A. (2019) · Sensors · doi:10.3390/s19051230 · Cited by 253
“Wearable temperature sensors are also nteresting for electronic skin applications and are widely xplored in addition to many other sensing devices, aimed a the advancement of industrial and particularly social robots [121,122].”
BackgroundLi, W., Ke, K., Jia, J., Pu, J., Zhao, X., Bao, R., Liu, Z., Bai, L., Zhang, K., Yang, M., et al. (2022) · Small · doi:10.1002/smll.202103734 · Cited by 251
Recent Progress in Technologies for Tactile Sensors
Chi, C., Sun, X., Xue, N., Li, T., & Liu, C. (2018) · Sensors · doi:10.3390/s18040948 · Cited by 247
Mini Review on Flexible and Wearable Electronics for Monitoring Human Health Information
Gu, Y., Zhang, T., Chen, H., Wang, F., Pu, Y., Gao, C., & Li, S. (2019) · Nanoscale Research Letters · doi:10.1186/s11671-019-3084-x · Cited by 247
“[8] fabricated a triaxial tactile sensor and temperature sensor array to simultaneously detect the tactile forces,”
BackgroundInfluentialPhysical sensors for skin‐inspired electronics
Li, S., Zhang, Y., Wang, Y., Xia, K., Yin, Z., Wang, H., Zhang, M., Liang, X., Lu, H., Zhu, M., et al. (2020) · InfoMat · doi:10.1002/inf2.12060 · Cited by 245
Advanced carbon materials for flexible and wearable sensors
Jian, M., Wang, C., Wang, Q., Wang, H., Xia, K., Yin, Z., Zhang, M., Liang, X., & Zhang, Y. (2017) · Science China Materials · doi:10.1007/s40843-017-9077-x · Cited by 223
Cui, Z., Poblete, F. R., & Zhu, Y. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b04045 · Cited by 209
Zwitterionic Skins with a Wide Scope of Customizable Functionalities
Lei, Z., & Wu, P. (2018) · ACS Nano · doi:10.1021/acsnano.8b08062 · Cited by 206
Zhang, Z., Tang, L., Chen, C., Yu, H., Bai, H., Wang, L., Qin, M., Feng, Y., & Feng, W. (2021) · Journal of Materials Chemistry A · doi:10.1039/d0ta09730f · Cited by 200
Printed Temperature Sensor Based on PEDOT: PSS-Graphene Oxide Composite
Soni, M., Bhattacharjee, M., Ntagios, M., & Dahiya, R. (2020) · IEEE Sensors Journal · doi:10.1109/jsen.2020.2969667 · Cited by 192
“25 1-2 s for ΔT of ~2 oC 2-3 s for ΔT of ~2 oC [40]”
BackgroundSreenilayam, S. P., Ul Ahad, I., Nicolosi, V., & Brabazon, D. (2021) · Materials Today · doi:10.1016/j.mattod.2020.10.025 · Cited by 192
Flexible Plasmonic Biosensors for Healthcare Monitoring: Progress and Prospects
Song, L., Chen, J., Xu, B. B., & Huang, Y. (2021) · ACS Nano · doi:10.1021/acsnano.1c07176 · Cited by 186
Gao, Y., Li, Q., Wu, R., Sha, J., Lu, Y., & Xuan, F. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201806786 · Cited by 181
A Review of Conductive Hydrogel‐Based Wearable Temperature Sensors
Mo, F., Zhou, P., Lin, S., Zhong, J., & Wang, Y. (2024) · Advanced Healthcare Materials · doi:10.1002/adhm.202401503 · Cited by 187
Recent Advances in 3D Printing of Biomedical Sensing Devices
Ali, M. A., Hu, C., Yttri, E. A., & Panat, R. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202107671 · Cited by 176
Advanced materials of printed wearables for physiological parameter monitoring
Sreenilayam, S. P., Ahad, I. U., Nicolosi, V., Acinas Garzon, V., & Brabazon, D. (2020) · Materials Today · doi:10.1016/j.mattod.2019.08.005 · Cited by 171
Cheng, Y., Wang, R., Zhai, H., & Sun, J. (2017) · Nanoscale · doi:10.1039/c7nr00121e · Cited by 165
Recent Progress in Wireless Sensors for Wearable Electronics
Park, Y., Lee, S.-I., & Park, J. (2019) · Sensors · doi:10.3390/s19204353 · Cited by 169
Bang, J., Lee, W. S., Park, B., Joh, H., Woo, H. K., Jeon, S., Ahn, J., Jeong, C., Kim, T., & Oh, S. J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201903047 · Cited by 162
Graphene-based wearable temperature sensors: A review
Nag, A., Simorangkir, R. B. V. B., Gawade, D. R., Nuthalapati, S., Buckley, J. L., O’Flynn, B., Altinsoy, M. E., & Mukhopadhyay, S. C. (2022) · Materials & Design · doi:10.1016/j.matdes.2022.110971 · Cited by 172
Flexible Hybrid Sensor Systems with Feedback Functions
Xu, K., Lu, Y., & Takei, K. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202007436 · Cited by 160
Self-citationKanao, K., Harada, S., Yamamoto, Y., Honda, W., Arie, T., Akita, S., & Takei, K. (2015) · RSC Advances · doi:10.1039/c5ra03110a · Cited by 148
Self-citation3D printing of polymer composites to fabricate wearable sensors: A comprehensive review
Osman, A., & Lü, J. (2023) · Materials Science and Engineering R Reports · doi:10.1016/j.mser.2023.100734 · Cited by 158
Materials and devices for transparent stretchable electronics
Trung, T. Q., & Lee, N. (2017) · Journal of Materials Chemistry C · doi:10.1039/c6tc05346g · Cited by 144
Zhang, J., Yan, K., Huang, J., Sun, X., Li, J., Cheng, Y., Sun, Y., Shi, Y., & Pan, L. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202314433 · Cited by 152
Tribotronic Transistor Array as an Active Tactile Sensing System
Yang, Z. W., Pang, Y., Zhang, L., Lu, C., Chen, J., Zhou, T., Zhang, C., & Wang, Z. L. (2016) · ACS Nano · doi:10.1021/acsnano.6b05507 · Cited by 139
Zhao, X., Guo, H., Ding, P., Zhai, W., Liu, C., Shen, C., & Dai, K. (2023) · Nano Energy · doi:10.1016/j.nanoen.2023.108197 · Cited by 135
Recent progress on screen-printed flexible sensors for human health monitoring
Gong, X., Huang, K. J., Wu, Y.-H., & Zhang, X. (2022) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2022.113821 · Cited by 141
Lee, J., Chen, H., Kim, E., Zhang, H., Wu, K., Zhang, H., Shen, X., Zheng, Q., Yang, J., Jeon, S., et al. (2021) · Materials Horizons · doi:10.1039/d1mh00018g · Cited by 134
Recent Advances on Underwater Soft Robots
Qu, J., Xu, Y., Li, Z., Yu, Z., Mao, B., Wang, Y., Wang, Z., Fan, Q., Qian, X., Zhang, M., et al. (2023) · Advanced Intelligent Systems · doi:10.1002/aisy.202300299 · Cited by 148
Paper Skin Multisensory Platform for Simultaneous Environmental Monitoring
Nassar, J. M., Cordero, M. D., Kutbee, A. T., Karimi, M. A., Sevilla, G. A. T., Hussain, A. M., Shamim, A., & Hussain, M. M. (2016) · Advanced Materials Technologies · doi:10.1002/admt.201600004 · Cited by 125
Ryu, J., Kim, J., Oh, J., Lim, S., Sim, J. Y., Jeon, J. S., No, K., Park, S., & Hong, S. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.10.071 · Cited by 127
Honda, W., Harada, S., Ishida, S., Arie, T., Akita, S., & Takei, K. (2015) · Advanced Materials · doi:10.1002/adma.201502116 · Cited by 125
Self-citationRecent Advances in Flexible Tactile Sensors for Intelligent Systems
Peng, Y., Yang, N., Xu, Q. F., Dai, Y., & Wang, Z. (2021) · Sensors · doi:10.3390/s21165392 · Cited by 134
Flexible temperature sensors based on carbon nanomaterials
Chen, Z., Zhao, D., Ma, R., Zhang, X., Rao, J., Yin, Y., Wang, X., & Fang, Y. (2020) · Journal of Materials Chemistry B · doi:10.1039/d0tb02451a · Cited by 124
Wang, F., Liu, S., Shu, L., & Tao, X. (2017) · Carbon · doi:10.1016/j.carbon.2017.06.006 · Cited by 124
An, T., Zhang, Y., Wen, J., Dong, Z., Du, Q., Liu, L., Wang, Y., Xing, G., & Zhao, X. (2024) · ACS Sensors · doi:10.1021/acssensors.3c02001 · Cited by 129
Zhang, J., Zhou, L., Zhang, H., Zhao, Z. X., Dong, S., Wei, S., Zhao, J., Wang, Z. L., Guo, B. Q., & Hu, P. (2018) · Nanoscale · doi:10.1039/c7nr09149d · Cited by 120
Highly flexible and sensitive temperature sensors based on Ti 3 C 2 T x (MXene) for electronic skin
Cao, Z., Yang, Y., Zheng, Y., Wu, W., Xu, F., Wang, R., & Sun, J. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta09225k · Cited by 119
Jeon, S., Lim, S., Trung, T. Q., Jung, M., & Lee, N. (2019) · Proceedings of the IEEE · doi:10.1109/jproc.2019.2930808 · Cited by 122
“For instance, flexible NTC thermistors in a resistor structure have been fabricated by using a printed PEDOT:PSS-CNT composite [70]–[72]; an NTC thermistor has been constructed by”
MethodSun, W., Guo, Z., Yang, Z., Wu, Y., Lan, W., Liao, Y., Wu, X., & Liu, Y. (2022) · Sensors · doi:10.3390/s22207784 · Cited by 112
“Such sensors are also used for 3D tactile and temperature measurements [152].”
MethodLiu, S., Zhang, W., He, J., Lü, Y., Wu, Q., & Xing, M. M. Q. (2023) · Advanced Fiber Materials · doi:10.1007/s42765-023-00338-9 · Cited by 123
“The emergence of intelligent sensing devices achieves dynamic capture and digital display of physical, chemical and biological signals [3–6].”
Recent Advances in Tactile Sensing Technology
Park, M., Bok, B., Ahn, J., & Kim, M.-S. (2018) · Micromachines · doi:10.3390/mi9070321 · Cited by 122
“developed a strain-engineered three-axis tactile sensor (36 strain gauges) and a temperature sensor (nine cells) with a 3 × 3 array over an area of 8 × 8 cm2 to address issues in the measurement of tangential force, normal force, and temperature for e-skin applications (Figure 7a) [67].”
BackgroundInfluentialMethods and Sensors for Slip Detection in Robotics: A Survey
Romeo, R. A., & Zollo, L. (2020) · IEEE Access · doi:10.1109/access.2020.2987849 · Cited by 117
“Electrical resistance variation might be exploited to sense three-axial forces with a vast quantity of fabrication processes and materials, including organic ones [35] and micro-electro mechanical systems (MEMS) [36], [37].”
BackgroundHighly Sensitive, Durable, and Multifunctional Sensor Inspired by a Spider
Luo, C., Jia, J., Gong, Y., Wang, Z., Fu, Q., & Pan, C. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b02988 · Cited by 111
Liu, H., Sun, K., Guo, X., Liu, Z., Wang, Y., Yang, Y., Yu, D., Li, Y., & Ren, T. (2022) · ACS Nano · doi:10.1021/acsnano.2c10342 · Cited by 110
Saeidi‐Javash, M., Du, Y., Zeng, M., Wyatt, B. C., Zhang, B., Kempf, N., Anasori, B., & Zhang, Y. (2021) · ACS Applied Electronic Materials · doi:10.1021/acsaelm.1c00218 · Cited by 108
Jiang, C., Zhang, Z., Pan, J., Wang, Y., Zhang, L., & Tong, L. (2021) · Advanced Materials Technologies · doi:10.1002/admt.202100285 · Cited by 113
Additive manufacturing and applications of nanomaterial-based sensors
Sui, X., Downing, J. R., Hersam, M. C., & Chen, J. (2021) · Materials Today · doi:10.1016/j.mattod.2021.02.001 · Cited by 111
Human‐Like Electronic Skin‐Integrated Soft Robotic Hand
Yamaguchi, T., Kashiwagi, T., Arie, T., Akita, S., & Takei, K. (2019) · Advanced Intelligent Systems · doi:10.1002/aisy.201900018 · Cited by 102
Self-citationSun, Z., Zhu, M., & Lee, C. (2021) · Nanoenergy Advances · doi:10.3390/nanoenergyadv1010005 · Cited by 105
Transparent and Self-Powered Multistage Sensation Matrix for Mechanosensation Application
Zhang, Q., Jiang, T., Ho, D. H., Qin, S., Yang, X., Cho, J. H., Sun, Q., & Wang, Z. L. (2017) · ACS Nano · doi:10.1021/acsnano.7b06126 · Cited by 97
Large‐Area All‐Printed Temperature Sensing Surfaces Using Novel Composite Thermistor Materials
Katerinopoulou, D., Zalar, P., Sweelssen, J., Kiriakidis, G., Rentrop, C., Groen, P., Gelinck, G. H., van den Brand, J., & Smits, E. C. P. (2018) · Advanced Electronic Materials · doi:10.1002/aelm.201800605 · Cited by 101
Embedded sensing: integrating sensors in 3-D printed structures
Dijkshoorn, A., Werkman, P., Welleweerd, M. K., Wolterink, G., Eijking, B., Delamare, J., Sanders, R., & Krijnen, G. J. M. (2018) · Journal of sensors and sensor systems · doi:10.5194/jsss-7-169-2018 · Cited by 99
“…infusion (Czyzewski et al., 2009; Vatani et al., 2015), e.g. by light curing (Vatani et al., 2015), resin developing (Muth et al., 2014) or evaporation of solvents (Pella); and 3. suspensions in which the carrier evaporates after infusion (Ko et al., 2010; Wu et al., 2015; Harada et al., 2014).”
BackgroundDesign and Characterization of Tri-Axis Soft Inductive Tactile Sensors
Wang, H., Jones, D. A., de Boer, G., Kow, J., Beccai, L., Alazmani, A., & Culmer, P. (2018) · IEEE Sensors Journal · doi:10.1109/jsen.2018.2845131 · Cited by 99
“tric [11], and optical waveguide sensors [12]), and advances in organic electronics [13] and printed flexible electronics [14].”
BackgroundWearable and Biodegradable Sensors for Clinical and Environmental Applications
Baldo, T. A., de Lima, L. F., Mendes, L. F., de Araujo, W. R., Paixão, T. R. L. C., & Coltro, W. K. T. (2020) · ACS Applied Electronic Materials · doi:10.1021/acsaelm.0c00735 · Cited by 97
Flexible wearable energy storage devices: Materials, structures, and applications
Zhang, Q., Gao, X., Liu, X., Mu, J., Gu, Q., Liu, Z., & Luo, W. (2024) · Battery energy · doi:10.1002/bte2.20230061 · Cited by 104
Screen-printed flexible temperature sensor based on FG/CNT/PDMS composite with constant TCR
Wu, L., Qian, J., Peng, J., Wang, K., Liu, Z., Ma, T., Zhou, Y., Wang, G., & Ye, S. (2019) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-019-01293-1 · Cited by 85
Flexible piezoresistive three-dimensional force sensor based on interlocked structures
Chen, S., Bai, C. G., Zhang, C., Da, G., Liu, R., Xie, Y., & Zhou, W. (2021) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2021.112857 · Cited by 94
A Fully Flexible Intelligent Thermal Touch Panel Based on Intrinsically Plastic Ag2S Semiconductor
Zhao, X., Yang, S., Wen, X., Huang, Q., Qiu, P., Wei, T., Zhang, H., Wang, J., Zhang, D. W., Shi, X., et al. (2022) · Advanced Materials · doi:10.1002/adma.202107479 · Cited by 90
Emerging Thermal Technology Enabled Augmented Reality
Parida, K., Bark, H., & Lee, P. S. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202007952 · Cited by 93
3D Printing Silicone Elastomer for Patient‐Specific Wearable Pulse Oximeter
Abdollahi, S., Markvicka, E. J., Majidi, C., & Feinberg, A. W. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.201901735 · Cited by 88
Anisotropic conductive networks for multidimensional sensing
Zhang, F., Ma, P., Wang, J., Zhang, Q., Feng, W., Zhu, Y., & Zheng, Q. (2021) · Materials Horizons · doi:10.1039/d1mh00615k · Cited by 81
Flexible and multi-directional piezoelectric energy harvester for self-powered human motion sensor
Kim, M.-O., Pyo, S., Oh, Y., Kang, Y., Cho, K.-H., Choi, J., & Kim, J. (2018) · Smart Materials and Structures · doi:10.1088/1361-665x/aaa722 · Cited by 81
“By tuning the structural parameters such as electrode and slit arrangement, bump size, and stiffness of PVDF, our harvester would also be responsive to three-dimensional forces (Fx, Fy and Fz) [28].”
BackgroundRobust and high-performance soft inductive tactile sensors based on the Eddy-current effect
Wang, H., Kow, J., Raske, N., de Boer, G., Ghajari, M., Hewson, R., Alazmani, A., & Culmer, P. (2017) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2017.12.060 · Cited by 81
“Remarkable progress has been made in developing compliant sensory systems, with notable examples including an ultra-lightweight, tactile sensing array with integrated organic electronics [11], a printed flexible tactile sensing skin [13], self-powered sensors employing triboelectric effects [14] and systems using orga…”
BackgroundMulti-modal strain and temperature sensor by hybridizing reduced graphene oxide and PEDOT:PSS
Zhang, F., Hu, H., Islam, M. S., Peng, S., Wu, S., Lim, S., Zhou, Y., & Wang, C. (2019) · Composites Science and Technology · doi:10.1016/j.compscitech.2019.107959 · Cited by 84
Ultrathin and Wearable Microtubular Epidermal Sensor for Real‐Time Physiological Pulse Monitoring
Xi, W., Yeo, J. C., Yu, L., Zhang, S., & Lim, C. T. (2017) · Advanced Materials Technologies · doi:10.1002/admt.201700016 · Cited by 80
Recent Advances in Resistive Sensor Technology for Tactile Perception: A Review
Zhu, Y., Liu, Y., Sun, Y., Zhang, Y., & Ding, G. (2022) · IEEE Sensors Journal · doi:10.1109/jsen.2022.3179015 · Cited by 91
Intelligent Silk Fibroin Ionotronic Skin for Temperature Sensing
Liu, J., Chen, Q., Liu, Q., Zhao, B., Ling, S., Yao, J., Shao, Z., & Chen, X. (2020) · Advanced Materials Technologies · doi:10.1002/admt.202000430 · Cited by 76
Flexible microstructured pressure sensors: design, fabrication and applications
Gao, Y., Xiao, T., Li, Q., Chen, Y., Qiu, X., Liu, J., Bian, Y., & Xuan, F. (2022) · Nanotechnology · doi:10.1088/1361-6528/ac6812 · Cited by 79
Flexible and wearable healthcare sensors for visual reality health-monitoring
Li, Y., Zheng, L., & Wang, X. (2019) · Virtual Reality & Intelligent Hardware · doi:10.1016/j.vrih.2019.08.001 · Cited by 77
Metadata
- Authors
- Harada, S., Kanao, K., Yamamoto, Y., Arie, T., Akita, S., & Takei, K.
- Affiliations
- Osaka Prefecture University (JP)
- Corresponding author
- Takei, Kuniharu
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-12-05
- Volume
- 8
- Issue
- 12
- Pages
- 12851-12857
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2323521842
- Semantic Scholar
- 1a37cf2c71d3724a6337de55ad55ec3f30a8d478
- Cited by
- 350
- References
- 22
- Citations by year
- 2026: 12 · 2025: 23 · 2024: 35 · 2023: 37 · 2022: 35 · 2021: 40 · 2020: 37 · 2019: 37 · 2018: 30 · 2017: 30 · 2016: 24 · 2015: 10
- FWCI
- 11.07
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- ACS Nano (publishedVersion)
- PubMed (publishedVersion)
- Funders
- Mazda Foundation
- Japan Society for the Promotion of Science (26630164, 26709026)
- Tateishi Science and Technology Foundation
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › Advanced Sensor and Energy Harvesting Materials
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Nanomaterials and Printing Technologies
- Physical Sciences › Materials Science › Surfaces, Coatings and Films › Nanofabrication and Lithography Techniques
- Keywords
- artificial skin, temperature sensing, three-axis force sensor, printed electronics, flexible electronics, strain engineering, robotic grasping
- MeSH terms
- Dermatoglyphics, Robotics, Temperature, Touch, Friction, Skin, Artificial, Electrical Equipment and Supplies
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.