Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 439

The DOI matches its Crossref record; 170 of the 170 references it cites were found in a registry or an index.

Assessment of Recent Process Analytical Technology (PAT) Trends: A Multiauthor Review

Open access
Simon, Levente L., Pataki, Hajnalka, Marosi, György, Meemken, Fabian, Hungerbühler, Konrad, Baiker, Alfons, Tummala, Srinivas, Glennon, Brian, Kuentz, Martin, Steele, Gerry, Kramer, Herman J. M., Rydzak, James W., Chen, Zengping, Morris, Julian, Kjell, Francois, Singh, Ravendra, Gani, Rafiqul, Gernaey, Krist V., Louhi-Kultanen, Marjatta, O’Reilly, John, Sandler, Niklas, Antikainen, Osmo, Yliruusi, Jouko, Frohberg, Patrick, Ulrich, Joachim, Braatz, Richard D., Leyssens, Tom, von Stosch, Moritz, Oliveira, Rui, Tan, Reginald B. H., Wu, Huiquan, Khan, Mansoor, O’Grady, Des, Pandey, Anjan, Westra, Remko, Delle-Case, Emmanuel, Pape, Detlef, Angelosante, Daniele, Maret, Yannick, Steiger, Olivier, Lenner, Miklós, Abbou-Oucherif, Kaoutar, Nagy, Zoltan K., Litster, James D., Kamaraju, Vamsi Krishna, Chiu, Min-Sen·2015·Organic Process Research & Development

Abstract

This multiauthor review article aims to bring readers up to date with some of the current trends in the field of process analytical technology (PAT) by summarizing each aspect of the subject (sensor development, PAT based process monitoring and control methods) and presenting applications both in industrial laboratories and in manufacture e.g. at GSK, AstraZeneca and Roche. Furthermore, the paper discusses the PAT paradigm from the regulatory science perspective. Given the multidisciplinary nature of PAT, such an endeavour would be almost impossible for a single author, so the concept of a multiauthor review was born. Each section of the multiauthor review has been written by a single expert or group of experts with the aim to report on its own research results. This paper also serves as a comprehensive source of information on PAT topics for the novice reader.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1021/op500261y

Cites

170 of 170 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 170 references

Research works printed but not linked: 257

  1. Munson J., 2006, Curr. Pharm. Anal., 2, 405, 10.2174/157341206778699582 · doi:10.2174/157341206778699582
  2. Barrett P., 2005, Org. Process Res. Dev., 9, 348, 10.1021/op049783p · doi:10.1021/op049783p
  3. Riley B. S., 2011, AAPS PharmSciTech, 12, 114, 10.1208/s12249-010-9566-x · doi:10.1208/s12249-010-9566-x
  4. Chianese A., 2012, Industrial Crystallization Process Monitoring and Control, 10.1002/9783527645206 · doi:10.1002/9783527645206
  5. Reid G. L., 2012, Am. Pharm. Rev., 15, 49
  6. Assirelli M., 2011, Org. Process Res. Dev., 15, 610, 10.1021/op100337v · doi:10.1021/op100337v
  7. Lobben P. C., 2004, Org. Process Res. Dev., 8, 1072, 10.1021/op049910h · doi:10.1021/op049910h
  8. Cote A., 2009, Org. Process Res. Dev., 13, 1276, 10.1021/op900095n · doi:10.1021/op900095n
  9. Barrios Sosa A. C., 2011, Org. Process Res. Dev., 15, 1458, 10.1021/op2001172 · doi:10.1021/op2001172
  10. McCabe Dunn J. M., 2011, Org. Process Res. Dev., 15, 1442, 10.1021/op200114t · doi:10.1021/op200114t
  11. Wiss J., 2005, Org. Process Res. Dev., 9, 365, 10.1021/op049784h · doi:10.1021/op049784h
  12. Sistare F., 2005, Org. Process Res. Dev., 9, 332, 10.1021/op0402127 · doi:10.1021/op0402127
  13. Guenard, R.; Thurau, G.Chapter 2, Implementation of PAT. InProcess Analytical Technology, Spectroscopic Tools and Implementation Strategies for the Chemical and Pharmaceutical Industries,2nd ed.Bakeev, K. A., Ed.Wiley:New York, 2010; pp17. · doi:10.1002/9780470689592.ch2
  14. Helmdach L., 2013, Chem. Eng. Process.: Process Intensification, 70, 184, 10.1016/j.cep.2013.04.003 · doi:10.1016/j.cep.2013.04.003
  15. Kadam S. S., 2012, Org. Process Res. Dev., 16, 769, 10.1021/op300055g · doi:10.1021/op300055g
  16. Adlington N. K., 2013, Org. Process Res. Dev., 17, 557, 10.1021/op300326b · doi:10.1021/op300326b
  17. Muteki K., 2013, Ind. Eng. Chem. Res., 52, 12258, 10.1021/ie3034587 · doi:10.1021/ie3034587
  18. Duffy D., 2013, Cryst. Growth Des., 13, 3321, 10.1021/cg301673g · doi:10.1021/cg301673g
  19. Hao H., 2010, Org. Process Res. Dev., 14, 1209, 10.1021/op100142k · doi:10.1021/op100142k
  20. Schaefer C., 2013, J. Pharm. Biomed. Anal., 83, 194, 10.1016/j.jpba.2013.05.015 · doi:10.1016/j.jpba.2013.05.015
  21. Clarke-Pringle T. L., 1998, Ind. Eng. Chem. Res., 37, 3660, 10.1021/ie980058a · doi:10.1021/ie980058a
  22. Crowley T. J., 1996, J. Process Control, 6, 119, 10.1016/0959-1524(95)00054-2 · doi:10.1016/0959-1524(95)00054-2
  23. Chen J., 2010, Am. Pharm. Rev., 13
  24. Mojica, C. A.; St Pierre Berry, L.; Sistare, F.Chapter 23, Process Analytical Technology in the Manufacture of Bulk Active Pharmaceuticals - Promise, Practise and Challenges. InProcess Chemistry in the Pharmaceutical Industry, Challenges in an ever changing climate;Gadamasetti, K.; Braish, T., Eds.CRC Press:Boca Raton, FL, 2008; Vol.2, pp361. · doi:10.1201/9781420008357.ch23
  25. Woodcock J., 2004, Am. Pharm. Rev., 1
  26. Wu H., 2005, Use of PAT for Active Pharmaceutical Ingredient Crystallization Process Control, 10.3182/20050703-6-CZ-1902.02228 · doi:10.3182/20050703-6-cz-1902.02228
  27. Yu Z. Q., 2014, Cryst. Growth Des., 14, 3949, 10.1021/cg500547m · doi:10.1021/cg500547m
  28. Chaudhury A., 2014, J. Pharm. Sci. Innovation, 9, 53, 10.1007/s12247-014-9172-7 · doi:10.1007/s12247-014-9172-7
  29. Chen J., 2011, Cryst. Growth Des., 11, 887, 10.1021/cg101556s · doi:10.1021/cg101556s
  30. Nagy Z. K., 2008, J. Process Control, 18, 856, 10.1016/j.jprocont.2008.06.002 · doi:10.1016/j.jprocont.2008.06.002
  31. Wu, H.; White, M.; Khan, M. A.An Integrated Process Analytical Technology (PAT) Approach for Process Dynamics-related Measurement Error and Process Design Space Development for a Pharmaceutical Powder Blending Bed.Org. Process Res. Dev. 2014, in press · doi:10.1021/op500085m
  32. Wu H., 2010, J. Pharm. Sci., 99, 1516, 10.1002/jps.21923 · doi:10.1002/jps.21923
  33. 10.1021/op500056a · doi:10.1021/op500056a
  34. Iwata K., 2014, Cryst. Growth Des., 14, 3335, 10.1021/cg500240j · doi:10.1021/cg500240j
  35. Tantry J. S., 2007, J. Pharm. Sci., 96, 1434, 10.1002/jps.20746 · doi:10.1002/jps.20746
  36. Arora K. K., 2011, Mol. Pharmaceutics, 8, 982, 10.1021/mp200043u · doi:10.1021/mp200043u
  37. Tiwari M., 2007, J. Pharm. Biomed. Anal., 43, 865, 10.1016/j.jpba.2006.08.030 · doi:10.1016/j.jpba.2006.08.030
  38. Siddiqui A., 2014, J. Pharm. Sci., 103, 2819, 10.1002/jps.23912 · doi:10.1002/jps.23912
  39. Rao P. S., 2011, J. Pharm. Biomed. Anal., 56, 413, 10.1016/j.jpba.2011.05.003 · doi:10.1016/j.jpba.2011.05.003
  40. Lee A. Y., 2011, Annu. Rev. Chem. Biomol. Eng., 2, 259, 10.1146/annurev-chembioeng-061010-114224 · doi:10.1146/annurev-chembioeng-061010-114224
  41. Mascia S., 2013, Angew. Chem., 125, 12585, 10.1002/ange.201305429 · doi:10.1002/ange.201305429
  42. Pertig D., 2011, Chem. Eng. Technol., 34, 639, 10.1002/ceat.201000558 · doi:10.1002/ceat.201000558
  43. Omar W., 1999, Cryst. Res. Technol., 34, 379, 10.1002/(SICI)1521-4079(199903)34:3<379::AID-CRAT379>3.0.CO;2-Z · doi:10.1002/(sici)1521-4079(199903)34:3<379::aid-crat379>3.0.co;2-z
  44. Omar W., 1997, Crystal Growth of Organic Materials 4, 294
  45. Titiz-Sargut S., 2003, Chem. Eng. Process., 42, 841, 10.1016/S0255-2701(02)00215-5 · doi:10.1016/s0255-2701(02)00215-5
  46. Omar W., 1999, Chem. Technol., 51, 286
  47. Stelzer T., 2013, J. Cryst. Growth, 362, 71, 10.1016/j.jcrysgro.2011.11.027 · doi:10.1016/j.jcrysgro.2011.11.027
  48. Pertig, D.; Stelzer, T.; Ulrich, J.InImproved Correlations of Single-frequency Ultrasound Velocity and Attenuation to Most Important Suspension Properties via Phenomenological Models, Proceedings, ISIC 2011 (18th International Symposium of Industrial Crystallization), Sept 13–16, 2011; Biscans, B.; Mazzotti, M., Eds.; AIDIC (The Italian Association of Chemical Engineering); p158.
  49. 10.1021/op4001803 · doi:10.1021/op4001803
  50. Smyth C. P., 1995, Dielectric Behavior and Structure. Dielectric Constant and Loss, Dipole Moment and Molecular Structure
  51. Goodwin A. R. H., 1997, J. Chem. Thermodyn., 29, 1481, 10.1006/jcht.1997.0257 · doi:10.1006/jcht.1997.0257
  52. He G., 2010, Org. Process Res. Dev., 14, 1469, 10.1021/op100182s · doi:10.1021/op100182s
  53. Hermanto M. W., 2011, Chem. Eng. Res. Des., 89, 2613, 10.1016/j.cherd.2011.04.012 · doi:10.1016/j.cherd.2011.04.012
  54. He G., 2012, Chem. Eng. Res. Des., 90, 259, 10.1016/j.cherd.2011.07.005 · doi:10.1016/j.cherd.2011.07.005
  55. Hermanto M. W., 2013, Chem. Eng. Sci., 97, 126, 10.1016/j.ces.2013.04.015 · doi:10.1016/j.ces.2013.04.015
  56. Simon L. L., 2012, Chem. Eng. Res. Des., 90, 1847, 10.1016/j.cherd.2012.03.023 · doi:10.1016/j.cherd.2012.03.023
  57. Simon L. L., 2009, Org. Process Res. Dev., 13, 1254, 10.1021/op900019b · doi:10.1021/op900019b
  58. Simon L. L., 2010, Chem. Eng. Sci., 65, 4983, 10.1016/j.ces.2010.05.045 · DOI
  59. Simon, L. L.; Reinlein, S.; Hungerbuhler, K.InTurbidity and endoscopy assisted monitoring of pseudopolymorphic transformation of citric acid, 18th International Symposium on Industrial Crystallization (ISIC 18), Zurich.
  60. Simon L. L., 2009, Chem. Eng. Sci., 64, 3344, 10.1016/j.ces.2009.04.016 · doi:10.1016/j.ces.2009.04.016
  61. Simon L. L., 2010, Ind. Eng. Chem. Res., 49, 9932, 10.1021/ie100586p · doi:10.1021/ie100586p
  62. Simon, L. L.; Myerson, A. S.InContinuous antisolvent plug-flow crystallization of a fast growing API, 18th International Symposium on Industrial Crystallization (ISIC 18), Zurich.
  63. Medendorp J., 2006, AAPS PharmSciTech, 7, E22, 10.1208/pt070359 · doi:10.1208/pt070359
  64. Kaatze U., 2008, Meas. Sci. Technol., 19, 062001, 10.1088/0957-0233/19/6/062001 · doi:10.1088/0957-0233/19/6/062001
  65. Cavegn M., 2011, J. Pharm. Sci., 100, 3374, 10.1002/jps.22538 · doi:10.1002/jps.22538
  66. Tikhonov D. A., 1995, Ultrasonics, 33, 301, 10.1016/0041-624X(95)00053-6 · doi:10.1016/0041-624x(95)00053-6
  67. Shukla A., 2010, AIChE J., 56, 2825, 10.1002/aic.12182 · doi:10.1002/aic.12182
  68. Harden J. L., 2001, Curr. Opin. Colloid Interface Sci., 6, 438, 10.1016/S1359-0294(01)00115-7 · doi:10.1016/s1359-0294(01)00115-7
  69. Lopez-Diaz D., 2011, Soft Matter, 7, 5926, 10.1039/c1sm05274h · doi:10.1039/c1sm05274h
  70. Zakharov P., 2006, Phys. Rev. E: Stat. Phys., Plasmas, Fluids, 73, 011413, 10.1103/PhysRevE.73.011413 · doi:10.1103/physreve.73.011413
  71. Scheffold F., 2007, Curr. Opin. Colloid Interface Sci., 12, 50, 10.1016/j.cocis.2007.03.005 · doi:10.1016/j.cocis.2007.03.005
  72. Niederquell A., 2012, Int. J. Pharm., 426, 144, 10.1016/j.ijpharm.2012.01.042 · doi:10.1016/j.ijpharm.2012.01.042
  73. Niederquell A., 2011, AAPS PharmSciTech, 12, 323, 10.1208/s12249-011-9589-y · doi:10.1208/s12249-011-9589-y
  74. Patchigolla K., 2009, Part. Part. Syst. Char., 26, 171, 10.1002/ppsc.200700030 · doi:10.1002/ppsc.200700030
  75. Sandler N., 2010, J. Pharm. Sci., 99, 958, 10.1002/jps.21884 · doi:10.1002/jps.21884
  76. Bonifazi G., 2002, Part. Part. Syst. Char., 19, 240, 10.1002/1521-4117(200208)19:4<240::AID-PPSC240>3.0.CO;2-# · doi:10.1002/1521-4117(200208)19:4<240::aid-ppsc240>3.0.co;2-#
  77. Novales B., 1998, J. Sci. Food Agric., 78, 187, 10.1002/(SICI)1097-0010(199810)78:2<187::AID-JSFA102>3.0.CO;2-3 · doi:10.1002/(sici)1097-0010(199810)78:2<187::aid-jsfa102>3.0.co;2-3
  78. Huang J., 2000, Chemometrics Intellig. Lab. Syst., 54, 1, 10.1016/S0169-7439(00)00100-3 · doi:10.1016/s0169-7439(00)00100-3
  79. Laitinen N., 2002, Eur. J. Pharm. Sci., 17, 217, 10.1016/S0928-0987(02)00189-6 · doi:10.1016/s0928-0987(02)00189-6
  80. Pons M., 1999, Powder Technol., 103, 44, 10.1016/S0032-5910(99)00023-6 · doi:10.1016/s0032-5910(99)00023-6
  81. Laitinen N., 2003, AAPS PharmSciTech, 4, 383, 10.1208/pt040449 · doi:10.1208/pt040449
  82. Laitinen N., 2004, J. Pharm. Sci., 93, 165, 10.1002/jps.10529 · doi:10.1002/jps.10529
  83. Rantanen J., 2000, AAPS PharmSciTech, 1, 26, 10.1208/pt010210 · doi:10.1208/pt010210
  84. Burggraeve A., 2010, Eur. J. Pharm. Biopharm., 76, 138, 10.1016/j.ejpb.2010.06.001 · doi:10.1016/j.ejpb.2010.06.001
  85. Närvänen T., 2008, AAPS PharmSciTech, 9, 282, 10.1208/s12249-008-9043-y · doi:10.1208/s12249-008-9043-y
  86. Närvänen T., 2008, Int. J. Pharm., 357, 132, 10.1016/j.ijpharm.2008.01.060 · doi:10.1016/j.ijpharm.2008.01.060
  87. Soppela I., 2011, AAPS PharmSciTech, 12, 476, 10.1208/s12249-011-9607-0 · doi:10.1208/s12249-011-9607-0
  88. Silva A. F., 2013, Eur. J. Pharm. Biopharm., 85, 1006, 10.1016/j.ejpb.2013.03.032 · doi:10.1016/j.ejpb.2013.03.032
  89. Sandler N., 2011, Expert Opin. Drug Delivery, 8, 225, 10.1517/17425247.2011.548382 · doi:10.1517/17425247.2011.548382
  90. Burggraeve A., 2011, Eur. J. Pharm. Sci., 44, 635
  91. Pedersen, M.; McClelland, J.InOptimized capacitive MEMS microphone for photoacoustic spectroscopy (PAS) applications, Proc. SPIE 5732, Quantum Sensing and Nanophotonic Devices II, San Jose, California , 2005; Manijeh, R.; Gail, J. B., Eds.: San Jose, CA; p108. · doi:10.1117/12.597136
  92. Jackson D. A., 1990, Particles in Gases and Liquids 2, Photoacoustic Detection of Radiation Absorbing Particles in Gases
  93. Koskinen V., 2008, Vib. Spectrosc., 48, 16, 10.1016/j.vibspec.2008.01.013 · doi:10.1016/j.vibspec.2008.01.013
  94. Maret Y., 2014, IEEE Sens. J., 14, 2841, 10.1109/JSEN.2014.2318353 · doi:10.1109/jsen.2014.2318353
  95. Banares M. A., 2002, J. Mater. Chem., 12, 3337, 10.1039/B204494C · doi:10.1039/b204494c
  96. Tinnemans S. J., 2006, Catal. Today, 113, 3, 10.1016/j.cattod.2005.11.076 · doi:10.1016/j.cattod.2005.11.076
  97. Tromp S. A., 2007, Catal. Today, 126, 184, 10.1016/j.cattod.2007.01.072 · doi:10.1016/j.cattod.2007.01.072
  98. Bürgi T., 2006, Advances in Catalysis, 50, 227
  99. Maeda N., 2012, Chimia, 66, 664, 10.2533/chimia.2012.664 · doi:10.2533/chimia.2012.664
  100. Gron H., 2002, Ind. Eng. Chem. Res., 42, 198, 10.1021/ie020346d · doi:10.1021/ie020346d
  101. Liotta V., 2004, Org. Process Res. Dev., 8, 488, 10.1021/op049959n · doi:10.1021/op049959n
  102. Barrett M., 2010, Chem. Eng. Res. Des., 88, 1108, 10.1016/j.cherd.2010.02.010 · doi:10.1016/j.cherd.2010.02.010
  103. Gutwald T., 1990, Chem. Eng. Technol., 13, 229, 10.1002/ceat.270130131 · doi:10.1002/ceat.270130131
  104. Dunuwila D. D., 1994, J. Cryst. Growth, 137, 561, 10.1016/0022-0248(94)90999-7 · doi:10.1016/0022-0248(94)90999-7
  105. Lewiner F., 2001, Chem. Eng. Sci., 56, 2069, 10.1016/S0009-2509(00)00508-X · doi:10.1016/s0009-2509(00)00508-x
  106. Togkalidou T., 2001, J. Cryst. Growth, 231, 534, 10.1016/S0022-0248(01)01518-4 · doi:10.1016/s0022-0248(01)01518-4
  107. Togkalidou T., 2002, Org. Process Res. Dev., 6, 317, 10.1021/op015516x · doi:10.1021/op015516x
  108. Fujiwara M., 2002, Cryst. Growth Des., 2, 363, 10.1021/cg0200098 · doi:10.1021/cg0200098
  109. Gron H., 2003, Ind. Eng. Chem. Res., 42, 4888, 10.1021/ie021037q · doi:10.1021/ie021037q
  110. Nagy Z. K., 2008, J. Process Control, 18, 399, 10.1016/j.jprocont.2007.10.006 · doi:10.1016/j.jprocont.2007.10.006
  111. Kee N. C., 2009, Cryst. Growth Des., 9, 3044, 10.1021/cg800546u · doi:10.1021/cg800546u
  112. Kee N. C., 2009, Cryst. Growth Des., 9, 3052, 10.1021/cg8006537 · doi:10.1021/cg8006537
  113. Zhou G., 2013, Org. Process Res. Dev., 17, 1320, 10.1021/op400187h · doi:10.1021/op400187h
  114. Woo X. Y., 2009, Cryst. Growth Des., 9, 182, 10.1021/cg800131r · doi:10.1021/cg800131r
  115. Kamaraju V. K., 2012, Proc. Adv. Control Chem. Processes, 8, 762
  116. Hermanto M. W., 2013, Chem. Eng. Sci., 97, 126, 10.1016/j.ces.2013.04.015 · doi:10.1016/j.ces.2013.04.015
  117. Alatalo H. M., 2010, Chem. Eng. Technol., 33, 743, 10.1002/ceat.200900550 · doi:10.1002/ceat.200900550
  118. Alatalo H., 2010, AIChE J., 56, 2063, 10.1002/aic.12140 · doi:10.1002/aic.12140
  119. Hatakka H., 2010, Chem. Eng. Technol., 33, 751, 10.1002/ceat.200900577 · doi:10.1002/ceat.200900577
  120. Hermanto M. W., 2010, Cryst. Growth Des., 10, 3668, 10.1021/cg100533n · doi:10.1021/cg100533n
  121. Randolph A. D., 1987, AIChE J., 33, 583, 10.1002/aic.690330407 · doi:10.1002/aic.690330407
  122. Hojjati H., 2007, Ind. Eng. Chem. Res., 46, 1232, 10.1021/ie060967x · doi:10.1021/ie060967x
  123. Sheikhzadeh M., 2008, Chem. Eng. Sci., 63, 991, 10.1016/j.ces.2007.10.024 · doi:10.1016/j.ces.2007.10.024
  124. Hermanto M. W., 2009, AIChE J., 55, 2631, 10.1002/aic.11879 · doi:10.1002/aic.11879
  125. Sheikhzadeh M., 2008, Chem. Eng. Sci., 63, 829, 10.1016/j.ces.2007.09.049 · doi:10.1016/j.ces.2007.09.049
  126. De Keyser R. M. C., 1988, Automatica, 24, 149, 10.1016/0005-1098(88)90024-6 · doi:10.1016/0005-1098(88)90024-6
  127. De Keyser R., 2007, Assessment Future Dir. Nonlinear Model Predict. Control, 358, 503, 10.1007/978-3-540-72699-9_42 · doi:10.1007/978-3-540-72699-9_42
  128. Tamas L., 2007, Proc. 11th Int. Conf. Intelligent Eng. Syst., 229
  129. Srinivasan B., 2007, Ind. Eng. Chem. Res., 46, 492, 10.1021/ie0600487 · doi:10.1021/ie0600487
  130. Kamaraju V. K., 2013, Proc. Eur.Control Conf., 3390
  131. Su Q.-L., 2014, J. Process Control, 24, 415, 10.1016/j.jprocont.2013.07.011 · doi:10.1016/j.jprocont.2013.07.011
  132. Su, Q. L.Modeling, Monitoring, and Control of pH-shift Reactive Crystallization. Ph.D. Thesis.National University of Singapore,Singapore, 2013.
  133. Nagy Z. K., 2012, Annu. Rev. Chem. Biomol. Eng., 3, 55, 10.1146/annurev-chembioeng-062011-081043 · DOI · Paper page
  134. Yang Y., 2013, Cryst. Growth Des., 14, 687, 10.1021/cg401562t · doi:10.1021/cg401562t
  135. Nagy Z., 2012, Chem. Eng. Sci., 84, 656, 10.1016/j.ces.2012.08.048 · doi:10.1016/j.ces.2012.08.048
  136. Woo X. Y., 2009, Cryst. Growth Des., 9, 182, 10.1021/cg800131r · doi:10.1021/cg800131r
  137. Bakar M. R. A., 2009, Org. Process Res. Dev., 13, 1343, 10.1021/op900174b · doi:10.1021/op900174b
  138. Abu Bakar M. R., 2010, Cryst. Growth Des., 10, 3892, 10.1021/cg1002379 · doi:10.1021/cg1002379
  139. Simone E., 2014, Cryst. Growth Des., 14, 1839, 10.1021/cg500017a · doi:10.1021/cg500017a
  140. Vajna B., 2010, J. Pharm. Biomed. Anal., 51, 30, 10.1016/j.jpba.2009.07.030 · doi:10.1016/j.jpba.2009.07.030
  141. Vajna B., 2011, J. Pharm. Biomed. Anal., 56, 38, 10.1016/j.jpba.2011.05.005 · doi:10.1016/j.jpba.2011.05.005
  142. Vajna B., 2011, Int. J. Pharm., 419, 107, 10.1016/j.ijpharm.2011.07.023 · doi:10.1016/j.ijpharm.2011.07.023
  143. Patyi G., 2010, J. Therm. Anal. Calorim., 102, 349, 10.1007/s10973-010-0936-0 · doi:10.1007/s10973-010-0936-0
  144. Billes F., 2012, Spectrochim. Acta, Pt. A: Mol. Spectrosc., 95, 148, 10.1016/j.saa.2012.04.029 · doi:10.1016/j.saa.2012.04.029
  145. Kubota N., 2008, J. Cryst. Growth, 310, 629, 10.1016/j.jcrysgro.2007.11.123 · doi:10.1016/j.jcrysgro.2007.11.123
  146. Hou J., 2012, Cryst. Res. Technol., 47, 888, 10.1002/crat.201200152 · doi:10.1002/crat.201200152
  147. Liu X., 2011, J. Pharm. Sci., 100, 2452, 10.1002/jps.22439 · doi:10.1002/jps.22439
  148. Nagy Z. K., 2008, Ind. Eng. Chem. Res., 47, 1245, 10.1021/ie060637c · doi:10.1021/ie060637c
  149. Scholl J., 2006, Cryst. Growth Des., 6, 881, 10.1021/cg0503402 · doi:10.1021/cg0503402
  150. Simon L. L., 2009, Chem. Eng. Sci., 64, 3344, 10.1016/j.ces.2009.04.016 · doi:10.1016/j.ces.2009.04.016
  151. Barrett P., 2002, Chem. Eng. Res. Des., 80, 799, 10.1205/026387602320776876 · doi:10.1205/026387602320776876
  152. Parsons A. R., 2003, Chem. Eng. Res. Des., 81, 700, 10.1205/026387603322150552 · doi:10.1205/026387603322150552
  153. Qu H., 2006, J. Cryst. Growth, 289, 286, 10.1016/j.jcrysgro.2005.11.108 · doi:10.1016/j.jcrysgro.2005.11.108
  154. Simon L. L., 2010, Ind. Eng. Chem. Res., 49, 9932, 10.1021/ie100586p · doi:10.1021/ie100586p
  155. Chen Z.-P., 2005, Anal. Chem., 77, 1376, 10.1021/ac040119g · doi:10.1021/ac040119g
  156. Chen Z.-P., 2008, Anal. Chem., 80, 6658, 10.1021/ac800987m · doi:10.1021/ac800987m
  157. Jin J.-W., 2011, Anal. Chem., 84, 320, 10.1021/ac202598f · doi:10.1021/ac202598f
  158. Chen Z.-P., 2012, Anal. Chem., 84, 4088, 10.1021/ac300189p · doi:10.1021/ac300189p
  159. Yang J., 2013, Chemometrics Intellig. Lab. Syst., 6, 10.1016/j.chemolab.2013.04.011 · doi:10.1016/j.chemolab.2013.04.011
  160. Chen Z.-P., 2011, Anal. Chem., 83, 2655, 10.1021/ac103145a · doi:10.1021/ac103145a
  161. Chen Z.-P., 2008, Analyst, 133, 914, 10.1039/b800104a · doi:10.1039/b800104a
  162. Du W., 2011, Anal. Chim. Acta, 690, 64, 10.1016/j.aca.2011.02.014 · doi:10.1016/j.aca.2011.02.014
  163. Chen Z.-P., 2011, Analyst, 136, 98, 10.1039/C0AN00171F · doi:10.1039/c0an00171f
  164. Chen Z.-P., 2009, Chemometrics Intellig. Lab. Syst., 96, 49, 10.1016/j.chemolab.2008.11.002 · doi:10.1016/j.chemolab.2008.11.002
  165. Khan S., 2011, Org. Process Res. Dev., 15, 540, 10.1021/op100223a · doi:10.1021/op100223a
  166. Samad N. A. F. A., 2013, Comput. Chem. Eng., 54, 8, 10.1016/j.compchemeng.2013.03.003 · doi:10.1016/j.compchemeng.2013.03.003
  167. Sen M., 2012, Chem. Eng. Sci., 80, 349, 10.1016/j.ces.2012.06.024 · doi:10.1016/j.ces.2012.06.024
  168. 10.1155/2013/843784 · doi:10.1155/2013/843784
  169. Singh R., 2013, Eur. J. Pharm. Biopharm., 85, 1164, 10.1016/j.ejpb.2013.02.019 · doi:10.1016/j.ejpb.2013.02.019
  170. Singh R., 2012, Int. J. Pharm., 438, 307, 10.1016/j.ijpharm.2012.09.009 · doi:10.1016/j.ijpharm.2012.09.009
  171. Hsu S., 2010, J. Pharm. Innov., 5, 24, 10.1007/s12247-010-9077-z · doi:10.1007/s12247-010-9077-z
  172. Hsu S., 2010, J. Pharm. Innov., 5, 14, 10.1007/s12247-010-9076-0 · doi:10.1007/s12247-010-9076-0
  173. Bardin M., 2004, Powder Technol., 140, 169, 10.1016/j.powtec.2004.03.003 · doi:10.1016/j.powtec.2004.03.003
  174. Ramachandran R., 2012, Chem. Eng. Res. Des., 90, 1063, 10.1016/j.cherd.2011.10.022 · doi:10.1016/j.cherd.2011.10.022
  175. Gatzke E. P., 2001, Powder Technol., 121, 149, 10.1016/S0032-5910(01)00334-5 · doi:10.1016/s0032-5910(01)00334-5
  176. Singh R., 2012, Pharm. Process. Mag., 27, 22
  177. Singh R., 2012, GMP News, European Compliance Academic (ECE)
  178. Rodionova O. Y., 2009, Anal. Chim. Acta, 642, 222, 10.1016/j.aca.2008.08.004 · doi:10.1016/j.aca.2008.08.004
  179. Vanarase A. U., 2010, Chem. Eng. Sci., 65, 5728, 10.1016/j.ces.2010.01.036 · doi:10.1016/j.ces.2010.01.036
  180. Wählby U., 2001, J. Food Eng., 47, 303, 10.1016/S0260-8774(00)00134-5 · doi:10.1016/s0260-8774(00)00134-5
  181. Blevins T., 2012, Advanced control foundation: Tools, Techniques and Applications
  182. Muzzio F., 2013, Pharm. Technol. Mag., 37, 40
  183. FDA, 2007, Guidance for industry, Q8 (R1) pharmaceutical development revision 1
  184. Singh R., 2010, Comput. Chem. Eng., 34, 1137, 10.1016/j.compchemeng.2010.04.011 · doi:10.1016/j.compchemeng.2010.04.011
  185. Sales-Cruz, M.Development of a computer aided modeling system for bio and chemical process and product design. PhD. Thesis.Technical University of Denmark,Lyngby, 2006.
  186. Saraceno A., 2012, Food Bioprocess Technol., 5, 1694, 10.1007/s11947-010-0477-3 · doi:10.1007/s11947-010-0477-3
  187. Freire J. T., 2012, Drying Technol., 30, 1342, 10.1080/07373937.2012.684085 · doi:10.1080/07373937.2012.684085
  188. Hermanto M. W., 2011, AlChE J., 57, 1008, 10.1002/aic.12331 · DOI
  189. Aehle M., 2010, Cytotechnology, 62, 413, 10.1007/s10616-010-9291-z · doi:10.1007/s10616-010-9291-z
  190. von Stosch M., 2013, 3rd Portuguese Bioengineering Meeting
  191. Kadam S. S., 2011, Chem. Eng. Res. Des., 89, 995, 10.1016/j.cherd.2010.11.013 · DOI
  192. Bermingham S. K., 1998, Part. Part. Syst. Char., 15, 56, 10.1002/(SICI)1521-4117(199802)15:1<56::AID-PPSC56>3.0.CO;2-U · doi:10.1002/(sici)1521-4117(199802)15:1<56::aid-ppsc56>3.0.co;2-u
  193. Neumann A. M., 2002, Part. Part. Syst. Char., 19, 17, 10.1002/1521-4117(200204)19:1<17::AID-PPSC17>3.0.CO;2-1 · doi:10.1002/1521-4117(200204)19:1<17::aid-ppsc17>3.0.co;2-1
  194. Kalbasenka A., 2011, Chem. Eng. Sci., 66, 4867, 10.1016/j.ces.2011.06.049 · doi:10.1016/j.ces.2011.06.049
  195. Ferguson S., 2012, Chem. Eng. Sci., 77, 105, 10.1016/j.ces.2012.02.013 · doi:10.1016/j.ces.2012.02.013
  196. Borchert C., 2011, Chem. Eng. Technol., 34, 545, 10.1002/ceat.201000465 · doi:10.1002/ceat.201000465
  197. Variankaval N., 2008, AIChE J., 54, 1682, 10.1002/aic.11555 · doi:10.1002/aic.11555
  198. Broadhead J., 2013, GMP Review, 11, 15
  199. Castagnoli C., 2010, Org. Process Res. Dev., 14, 1407, 10.1021/op100209c · doi:10.1021/op100209c
  200. Bonnett P., 2003, Chem. Commun., 698, 10.1039/b212062c · doi:10.1039/b212062c

200 of 257 shown

Cited by

Metadata

Authors
Simon, L. L., Pataki, H., Marosi, G., Meemken, F., Hungerbühler, K., Baiker, A., Tummala, S., Glennon, B., Kuentz, M., Steele, G., Kramer, H. J. M., Rydzak, J. W., Chen, Z., Morris, J., Kjell, F., Singh, R., Gani, R., Gernaey, K. V., Louhi-Kultanen, M., O’Reilly, J., Sandler, N., Antikainen, O., Yliruusi, J., Frohberg, P., Ulrich, J., Braatz, R. D., Leyssens, T., von Stosch, M., Oliveira, R., Tan, R. B. H., Wu, H., Khan, M., O’Grady, D., Pandey, A., Westra, R., Delle-Case, E., Pape, D., Angelosante, D., Maret, Y., Steiger, O., Lenner, M., Abbou-Oucherif, K., Nagy, Z. K., Litster, J. D., Kamaraju, V. K., & Chiu, M.-S.
Venue
Organic Process Research & Development
Published
2015-01-08
Volume
19
Issue
1
Pages
3-62
ISSN
  • 1083-6160 (ISSN-L)
  • 1520-586X
OpenAlex
W2038865813
Cited by
439
References
170
FWCI
30.53
Type
journal article
Language
en
Open access
green
Funders
  • Engineering and Physical Sciences Research Council (GR/R19366/01, GR/R43853/01)
  • European Research Council (280106-CrySys)
  • Ministry of Education of the People's Republic of China (NCET-12-0106)
  • Suomen Akatemia (260141)
  • National Natural Science Foundation of China (21075034, 21275046)
  • DTI

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.