Prediction of thermal boundary resistance by the machine learning method
Open accessThe DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.
Abstract
Thermal boundary resistance (TBR) is a key property for the thermal management of high power micro- and opto-electronic devices and for the development of high efficiency thermal barrier coatings and thermoelectric materials. Prediction of TBR is important for guiding the discovery of interfaces with very low or very high TBR. In this study, we report the prediction of TBR by the machine learning method. We trained machine learning models using the collected experimental TBR data as training data and materials properties that might affect TBR as descriptors. We found that the machine learning models have much better predictive accuracy than the commonly used acoustic mismatch model and diffuse mismatch model. Among the trained models, the Gaussian process regression and the support vector regression models have better predictive accuracy. Also, by comparing the prediction results using different descriptor sets, we found that the film thickness is an important descriptor in the prediction of TBR. These results indicate that machine learning is an accurate and cost-effective method for the prediction of TBR.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hansen, K., Biegler, F., Ramakrishnan, R., Pronobis, W., von Lilienfeld, O. A., Müller, K.-R., & Tkatchenko, A. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b00831 · Cited by 815 · cited 1×
“It is known that the predictive accuracy of machine learning algorithms is strongly dependent on the selected descriptor sets 77 .”
BackgroundHeat transport in thin dielectric films
Lee, S.-M., & Cahill, D. G. (1997) · Journal of Applied Physics · doi:10.1063/1.363923 · Cited by 732
Effects of chemical bonding on heat transport across interfaces
Losego, M. D., Grady, M. E., Sottos, N. R., Cahill, D. G., & Braun, P. V. (2012) · Nature Materials · doi:10.1038/nmat3303 · Cited by 701 · cited 4×
“Thus, TBR can dominate the thermal resistance of the constituent materials and become a major component of the overall thermal resistance in nanostructured materials 1–3 .”
BackgroundMethodInfluentialRegner, K. T., Sellan, D. P., Su, Z., Amon, C. H., McGaughey, A. J. H., & Malen, J. A. (2013) · Nature Communications · doi:10.1038/ncomms2630 · Cited by 646 · cited 2×
“By comparison, the phonon mean free paths (MFPs) in crystalline materials can be micrometers long 5 .”
BackgroundKapitza conductance and heat flow between solids at temperatures from 50 to 300 K
Stoner, R. J., & Maris, H. J. (1993) · Physical Review B · doi:10.1103/physrevb.48.16373 · Cited by 646
Thermal conductance of interfaces between highly dissimilar materials
Lyeo, H.-K., & Cahill, D. G. (2006) · Physical Review B · doi:10.1103/physrevb.73.144301 · Cited by 576
Thermal Conductivity Spectroscopy Technique to Measure Phonon Mean Free Paths
Minnich, A. J., Johnson, J. A., Schmidt, A. J., Esfarjani, K., Dresselhaus, M. S., Nelson, K. A., & Chen, G. (2011) · Physical Review Letters · doi:10.1103/physrevlett.107.095901 · Cited by 556
Thermal conductance of epitaxial interfaces
Costescu, R. M., Wall, M. A., & Cahill, D. G. (2003) · Physical Review B · doi:10.1103/physrevb.67.054302 · Cited by 486
Thermal Conductance of Hydrophilic and Hydrophobic Interfaces
Ge, Z., Cahill, D. G., & Braun, P. V. (2006) · Physical Review Letters · doi:10.1103/physrevlett.96.186101 · Cited by 455
Pernot, G., Stoffel, M., Savic, I., Pezzoli, F., Chen, P., Savelli, G., Jacquot, A., Schumann, J., Denker, U., Mönch, I., et al. (2010) · Nature Materials · doi:10.1038/nmat2752 · Cited by 375
Cited by
Recent advances and applications of machine learning in solid-state materials science
Schmidt, J., Marques, M. R. G., Botti, S., & Marques, M. A. L. (2019) · npj Computational Materials · doi:10.1038/s41524-019-0221-0 · Cited by 2,607
A Critical Review of Machine Learning of Energy Materials
Chen, C., Zuo, Y., Ye, W., Li, X., Deng, Z., & Ong, S. P. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903242 · Cited by 609
Jha, D., Choudhary, K., Tavazza, F., Liao, W.-K., Choudhary, A., Campbell, C., & Agrawal, A. (2019) · Nature Communications · doi:10.1038/s41467-019-13297-w · Cited by 339
Wei, H., Zhao, S., Rong, Q., & Bao, H. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.08.082 · Cited by 332
Wang, L., Zhang, Z., Liu, Y., Wang, B., Fang, L., Qiu, J., Zhang, K., & Wang, S. (2018) · Nature Communications · doi:10.1038/s41467-018-06251-9 · Cited by 295
Self-citation
Metadata
- Authors
- Zhan, T., Fang, L., & Xu, Y.
- Venue
- Scientific Reports
- Published
- 2017-08-02
- Volume
- 7
- Issue
- 1
- Pages
- 7109-7109
- ISSN
- 2045-2322 (ISSN-L)
- OpenAlex
- W2742014174
- Cited by
- 106
- References
- 13
- FWCI
- 3.73
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Prediction of thermal boundary resistance by the machine learning method. https://app.cochat.ai/papers/10.1038/s41598-017-07150-7
- The paper
- Zhan, T., Fang, L., & Xu, Y. (2017). Prediction of thermal boundary resistance by the machine learning method. Scientific Reports. https://doi.org/10.1038/s41598-017-07150-7
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.